Also remove recipes/00-check_testalltests.t, since it will lack the
information from the now gone alltests target.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Note that this required a change in constant_time_test.c, as it says
"ok", which interferes with what Test::Harness expects to see.  I had
constant_time_test.c say "success" instead.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This covers the certificate authority commands, the cms and smime
commands, OCSP, SSL and TSA.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Some of them make use of recipes/tconversion.pl.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Some of them make use of recipes/tconversion.pl.
Reviewed-by: NRich Salz <rsalz@openssl.org>

As tests are done until now, there are a few scripts that look almost,
but not quite the same.  tkey, tx509, tcrl, tpkcs7, treq, tsid and
probably a few more.

recipes/tconversions.pl is a helper script that generalises the
function of each of those, and can then be used in a general manner
from test recipes.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This tests all available openssl cipher commands.
Reviewed-by: NRich Salz <rsalz@openssl.org>

These recipes all correspond to a compiled test program.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The math recipes are among the heavier, but also quite important.
For the BN test, we have previously relied on bc to verify the numbers.
Unfortunately, bc doesn't exist everywhere, making tests on some platforms
rather painful.  With the new recipe (recipes/10-test_bn.t), we rely
on perl's Math::BigInt and a homegrown simple calculator (recipes/bc.pl)
that can do enough to cover for bc.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The idea with this perl based testing framework is to make use of
what's delivered with perl and exists on all sorts of platforms.

The choice came to using Test::More and Test::Harness, as that seems
to be the most widely spread foundation, even if perl is aged.

The main runner of the show is run_tests.pl.  As it currently stands,
it's designed to run from inside Makefile, but it's absolutely
possible to run it from the command line as well, like so:

	cd test
	OPENSSL_SRCDIR=.. perl run_tests.pl

The tester scripts themselves are stored in the subdirectory recipes/,
and initially, we have two such scripts, recipes/00-check_testalltests.t
and recipes/00-check_testexes.t.  recipes/00-check_testalltests.t will
pick out the dependencies of "alltests" in test/Makefile, and check if
it can find recipes with corresponding names.  recipes/00-check_testexes.t
does something similar, but bases it on existing compiled test binaries.
They make it easy to figure out what's to be added, and will be
removed when this effort is finished.

Individual recipes can be run as well, of course, as they are perl
scripts in themselves.  For example, you can run only
recipes/00-check_testexes.t like so:

	cd test
	OPENSSL_SRCDIR=.. perl recipes/00-check_testexes.t

To make coding easier, there's a routine library OpenSSL::Test, which
is reachable in a perl script like so:

	use lib 'testlib';
	use OpenSSL::Test;
Reviewed-by: NRich Salz <rsalz@openssl.org>

The test executables use standard output and standard error for text output,
so let's open the corresponding BIOs in text mode.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Depending on platform, verify_extra_test may fail because it relies on
test/ being the current working directory.  Make it get all the required
files on the command line instead to solve that issue.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Add RUN function; remove single-use functions and use their body inline.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Since there seems to be no way to avoid linking to libssl and libcrypto,
just wrap the test. This unbreaks "shared" builds when using clang and/or
OS X.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NBen Laurie <ben@openssl.org>

Commit d4ab70f2 added a test program
to check that the NULL pointer is represented as all zero bits, but
did not specify a build rule for that new executable.  On many platforms,
the implicit rule sufficed, since nptest is a very simple program, but
for at least darwin-i386-cc, an explicit rule is needed.  On darwin-i386-cc,
the implicit rule targetted a 64-bit executable, but the object file
containing the definition of main was a 32-bit object, which the linker
excluded from consideration, resulting in a link failure due to no
definition for _main.

Add the missing build rule to fix the build on such platforms.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Add a test to ensure that "char *p = NULL" is equivalent to
all-bytes-zero.
Reviewed-by: NTim Hudson <tjh@openssl.org>

This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available.  Mostly done by David Woodhouse.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Also has changes from from David Woodhouse <David.Woodhouse@intel.com>
and some tweaks from me.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Add test to check PBE lookups: these can fail if the PBE table is not
correctly orders. Add to "make test".
Reviewed-by: NMatt Caswell <matt@openssl.org>

It's test code that only runs on 64bit time_t machines.
Move it to a standalone test/gmdifftest
Reviewed-by: NRichard Levitte <levitte@openssl.org>

There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add support for testing ECDSA and DSA ciphersuites.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Use SSL_CONF for certificate handling is ssltest.c, this changes the
behaviour slightly: the -cert and -key options are no longer recognised
and a default certificate file is not used.

This change means that -s_cert and -c_cert can be used mode than once
to support use of multiple certificates.
Reviewed-by: NMatt Caswell <matt@openssl.org>

If supported create DSA and ECDSA certificates and test them.
Reviewed-by: NMatt Caswell <matt@openssl.org>

- Pass in the right ciphertext length to ensure we're indeed testing
  ciphertext corruption (and not truncation).
- Only test one mutation per byte to not make the test too slow.
- Add a separate test for truncated ciphertexts.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't dereference |d| when |top| is zero. Also test that various BIGNUM methods behave correctly on zero/even inputs.

Follow-up to b11980d79a52ec08844f08bea0e66c04b691840b
Reviewed-by: NRich Salz <rsalz@openssl.org>

BN_bntest_rand generates a single-word zero BIGNUM with quite a large probability.

A zero BIGNUM in turn will end up having a NULL |d|-buffer, which we shouldn't dereference without checking.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Rewrite ssl3_get_client_hello to use the new methods.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Add a set of tests for checking that NewSessionTicket messages are
behaving as expected.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add DSA tests.

Add tests to verify signatures against public keys. This will also check
that a public key is read in correctly.
Reviewed-by: NBen Laurie <ben@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Enhance the PACKET code readability, and fix a stale comment. Thanks
to Ben Kaduk (bkaduk@akamai.com) for pointing this out.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Use a dynamic engine for ossltest engine so that we can build it without
subsequently deploying it during install. We do not want people accidentally
using this engine.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

When using an anon DH ciphersuite a client should reject a 0 value for p.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Two tests are added: one is a simple version tolerance test; the second is
a test to ensure that OpenSSL operates correctly in the case of a zero
length extensions block. The latter was broken inadvertently (now fixed)
and it would have been helpful to have a test case for it.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

We could just initialize it, but to be consistent with the rest of the file
it seemed to make more sense to just drop.
Reviewed-by: NBen Laurie <ben@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>