- 10 2月, 2016 23 次提交
-
-
由 Richard Levitte 提交于
With some compilers, C macros are defined differently on the command line than on Unix. It could be that the flad to define them isn't -D, it could also be that they need to be grouped together and not be mixed in with the other compiler flags (that's how it's done on VMS, for example). On Unix family platform configurations, we can continue to have macro definitions mixed in with the rest of the flags, so the changes in Configurations/*.conf are kept to an absolute minimum. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rich Salz 提交于
Remoce DYANMIC once-init stuff. After the library is stopped, you can't restart it. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Rebased and merged by me, with Ben's approval. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NBen Laurie <ben@openssl.org>
-
由 Matt Caswell 提交于
If you call an explicit deinit when we've not been inited then a seg fault can occur. We should check that we've been inited before attempting to deinit. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
It seems like it gives back gibberish. If we asked for a numeric service, it's easy to check for a digit in the first position, and if there isn't any, rewrite it using older methods. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
In build.info files, make the include directory in the build directory absolute, or Configure will think it should be added to the source directory top. Configure will turn it into a relative path if possible. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
There were cases where some input was absolute, and concatenating it to the diretory to the source or build top could fail spectacularly. Let's check the input first to see if it's absolute. And while we're on the subject of checking if a file or dir spec is absolute using file_name_is_absolute() has its own quirks on VMS, where a logical name is considered absolute under most circumstances. This is perfectly correct from a VMS point of view, but when parsing the build.info files, we want single word file or directory names to only be checked syntactically. A function isabsolute() that does the right thing is the solution. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
memset() is used by CRYPTO_secure_zalloc(), which isn't hidden away behind IMPLEMENTED. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
This also closes RT 4123 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Make some global variables that are only ever accessed from one file static. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
After the final use of the thread_local_inits_st we should ensure it is set to NULL, just in case OPENSSL_INIT_thread_stop gets called again and it tries to use garbage. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
With the new init framework resources aren't released until the process exits. This means checking for mem leaks before that point finds a lot of things! We should explicitly close down the library if we're checking for mem leaks. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Mat 提交于
version32.rc was not created on Windows. The if condition has been corrected. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Quanah Gibson-Mount 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Signed-off-by: NRich Salz <rsalz@openssl.org>
-
- 09 2月, 2016 17 次提交
-
-
由 A J Mohan Rao 提交于
* added missing help option messages * ecdh_single option is removed as it is a no-op and not an option supported in earlier versions * ssl_ctx_security_debug() was invoked before ctx check for NULL * trusted_first option can be removed, as it is always enabled in 1.1. But not removed the option, require confirmation. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Fixes for the auto-init/deinit code based on review comments Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The newly added internal async.h header file had last years date in it. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Various Makefile.in files have changes for auto-init/de-init. Make the equivalent changes in build.info. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
A race condition can occur when sending config settings to OPENSSL_INIT_crypto_library_start() Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Provide some man pages for auto-init/deinit. Also update the INSTALL documentation for information on the new Configure options implemented as part of this. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
This option disables automatic loading of the crypto/ssl error strings in order to keep statically linked executable file size down Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Add the OPENSSL_INIT_thread_stop() function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Remove the need to explicitly initialise/deinitialise for the tests Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Clean up the apps so that we make use of the new auto-init/de-init feature. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Building on the pervious commit to auto initialise and de-initialise libssl Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
This builds on the previous commit to auto initialise/deinitialise libcrypto. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
This commit provides the basis and core code for an auto initialisation and deinitialisation framework for libcrypto and libssl. The intention is to remove the need (in many circumstances) to call explicit initialise and deinitialise functions. Explicit initialisation will still be an option, and if non-default initialisation is needed then it will be required. Similarly for de-initialisation (although this will be a lot easier since it will bring all de-initialisation into a single function). Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
The previous fix wasn't complete, it was missing a 'use OpenSSL::Test::Utils' Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
It seems realpath() is quite buggy on VMS, or will at least give quite surprising results. On the other hand, realpath() is the better on Unix to clean out clutter like foo/../bar on Unix. So we make out own function to get the absolute directory for a given input, and use rel2abs() or realpath() depending on the platform Configure runs on. Issue reported by Steven M. Schweda <sms@antinode.info> Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-