- 06 9月, 2015 14 次提交
-
-
由 Richard Levitte 提交于
Fixing a small mixup. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
The test executables use standard output and standard error for text output, so let's open the corresponding BIOs in text mode. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Most of all, we needed to sort out which ones are binary and which ones are text, and make sure they are treated accordingly and consistently so Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Depending on platform, verify_extra_test may fail because it relies on test/ being the current working directory. Make it get all the required files on the command line instead to solve that issue. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
Add RUN function; remove single-use functions and use their body inline. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
Most of the accessors existed and were already used so it was easy. TS_VERIFY_CTX didn't have accessors/settors so I added the simple and obvious ones, and changed the app to use them. Also, within crypto/ts, replaced the functions with direct access to the structure members since we generally aren't opaque within a directory. Also fix RT3901. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
Use malloc/free instead of big onstack buffers. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 mrpre 提交于
Signed-off-by: NRich Salz <rsalz@akamai.com> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 David Woodhouse 提交于
In some environments, such as firmware, the current system time is entirely meaningless. Provide a clean mechanism to suppress the checks against it. Signed-off-by: NRich Salz <rsalz@akamai.com> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Alessandro Ghedini 提交于
Since there seems to be no way to avoid linking to libssl and libcrypto, just wrap the test. This unbreaks "shared" builds when using clang and/or OS X. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NBen Laurie <ben@openssl.org>
-
- 05 9月, 2015 5 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Benjamin Kaduk 提交于
Commit d4ab70f2 added a test program to check that the NULL pointer is represented as all zero bits, but did not specify a build rule for that new executable. On many platforms, the implicit rule sufficed, since nptest is a very simple program, but for at least darwin-i386-cc, an explicit rule is needed. On darwin-i386-cc, the implicit rule targetted a 64-bit executable, but the object file containing the definition of main was a 32-bit object, which the linker excluded from consideration, resulting in a link failure due to no definition for _main. Add the missing build rule to fix the build on such platforms. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Dr. Stephen Henson 提交于
PR#4009. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rich Salz 提交于
Add a test to ensure that "char *p = NULL" is equivalent to all-bytes-zero. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
This does 64-bit division and multiplication, and on 32-bit platforms pulls in libgcc symbols (and MSVC does similar) which may not be available. Mostly done by David Woodhouse. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 04 9月, 2015 8 次提交
-
-
由 Rich Salz 提交于
Found on GitHub by dimman Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 David Woodhouse 提交于
This reverts the non-cleanup parts of commit c73ad690. We do actually have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI build, since we don't have a strspn() function in our runtime environment and we don't want the RFC3779 functionality anyway. In addition, it changes the default behaviour of the Configure script so that RFC3779 support isn't disabled by default. It was always disabled from when it was first added in 2006, right up until the point where OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the Configure script was left *trying* to disable it, but not actually working. Signed-off-by: NRich Salz <rsalz@akamai.com> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
After openssl_zalloc, cleanup more "set to 0/NULL" assignments. Many are from github feedback. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Long, Qin 提交于
Add OPENSSL_SYS_UEFI flag for RAND handling; Signed-off-by: NRich Salz <rsalz@akamai.com> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 David Bar 提交于
Also has changes from from David Woodhouse <David.Woodhouse@intel.com> and some tweaks from me. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Add test to check PBE lookups: these can fail if the PBE table is not correctly orders. Add to "make test". Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 03 9月, 2015 11 次提交
-
-
由 Alessandro Ghedini 提交于
Closes #63 Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NBen Laurie <ben@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
It's test code that only runs on 64bit time_t machines. Move it to a standalone test/gmdifftest Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
There are many places (nearly 50) where we malloc and then memset. Add an OPENSSL_zalloc routine to encapsulate that. (Missed one conversion; thanks Richard) Also fixes GH328 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Add support for testing ECDSA and DSA ciphersuites. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Use SSL_CONF for certificate handling is ssltest.c, this changes the behaviour slightly: the -cert and -key options are no longer recognised and a default certificate file is not used. This change means that -s_cert and -c_cert can be used mode than once to support use of multiple certificates. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
If supported create DSA and ECDSA certificates and test them. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 02 9月, 2015 2 次提交
-
-
由 Rich Salz 提交于
The only place that uses it. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Viktor Dukhovni 提交于
Avoid using cnid = 0, use NID_undef instead, and return early instead of trying to find an instance of that in the subject DN. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-