Bug reported by Michel Sales.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Simplifies calling code.  Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This is also RT 4137
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Also gives an error message when you gave it a parameter it didn't expect.
Reviewed-by: NRich Salz <rsalz@openssl.org>

MR: #2009

enc:
 - typo in -base64 option
 - missing help opt text
ocsp, req, rsautl, s_client:
 - missing help opt text
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Change the default keysize to 2048 bits, and the minimum to 512 bits.
Reviewed-by: NRich Salz <rsalz@openssl.org>

PR#4246 and PR#4266
Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

continue on from previous commits but in the apps directory
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Previous OpenSSL versions used -set_serial, but master was using
-set-serial - so rename it back to the old version.

RT#4059
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.

The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Remove asn1-kludge option from the req utility. It was a decade old
workaround for CAs and software which required an invalid encoding
of PKCS#10 certificate requests: omitting the attributes field even
though it is not OPTIONAL.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

There's no reason why we should default to a output format that is
old, and confusing in some cases.

This affects the commands "ca", "crl", "req" and "x509".
Reviewed-by: NRich Salz <rsalz@openssl.org>

When generating a private key, try to make the output file be readable
only by the owner.  Put it in CHANGES file since it might be noticeable.

Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key.  Checked via assert so that this
bug (security-related) gets fixed.  Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Here are the "rules" for handling flags that depend on #ifdef:

- Do not ifdef the enum.  Only ifdef the OPTIONS table.  All ifdef'd
  entries appear at the end; by convention "engine" is last.  This
  ensures that at run-time, the flag will never be recognized/allowed.
  The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
  disable it; leave the "case OPT_xxx:" and "break" statements outside
  the ifdef/ifndef.  See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
  OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
  and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
  for example.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Create app_load_config(), a routine to load config file.  Remove the
"always load config" from the main app.  Change the places that used to
load config to call the new common routine.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The "out" variable is used for both key and csr.  Close it after
writing the first one so it can be re-used when writing the other.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: NTim Hudson <tjh@openssl.org>

After the finale, the "real" final part. :)  Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Don't check for NULL before calling free functions. This gets:
        ERR_STATE_free
        ENGINE_free
        DSO_free
        CMAC_CTX_free
        COMP_CTX_free
        CONF_free
        NCONF_free NCONF_free_data _CONF_free_data
        A sk_free use within OBJ_sigid_free
        TS_TST_INFO_free (rest of TS_ API was okay)
        Doc update for UI_free (all uses were fine)
        X509V3_conf_free
        X509V3_section_free
        X509V3_string_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This is merges the old "rsalz-monolith" branch over to master.  The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt.  Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that.  There have been many other changes and code-cleanup, see
bullet list below.

Special thanks to Matt for the long and detailed code review.

TEMPORARY:
        For now, comment out CRYPTO_mem_leaks() at end of main

Tickets closed:
        RT3515: Use 3DES in pkcs12 if built with no-rc2
        RT1766: s_client -reconnect and -starttls broke
        RT2932: Catch write errors
        RT2604: port should be 'unsigned short'
        RT2983: total_bytes undeclared #ifdef RENEG
        RT1523: Add -nocert to fix output in x509 app
        RT3508: Remove unused variable introduced by b09eb246
        RT3511: doc fix; req default serial is random
        RT1325,2973: Add more extensions to c_rehash
        RT2119,3407: Updated to dgst.pod
        RT2379: Additional typo fix
        RT2693: Extra include of string.h
        RT2880: HFS is case-insensitive filenames
        RT3246: req command prints version number wrong

Other changes; incompatibilities marked with *:
        Add SCSV support
        Add -misalign to speed command
        Make dhparam, dsaparam, ecparam, x509 output C in proper style
        Make some internal ocsp.c functions void
        Only display cert usages with -help in verify
        Use global bio_err, remove "BIO*err" parameter from functions
        For filenames, - always means stdin (or stdout as appropriate)
        Add aliases for -des/aes "wrap" ciphers.
        *Remove support for IISSGC (server gated crypto)
        *The undocumented OCSP -header flag is now "-header name=value"
        *Documented the OCSP -header flag
Reviewed-by: NMatt Caswell <matt@openssl.org>

EVP_.*free; this gets:
        EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
        EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
        EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Suggested by John Foley <foleyj@cisco.com>.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

This should be a one off operation (subsequent invokation of the
script should not move them)
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

This last one for this ticket.  Removes WIN16.
So long, MS_CALLBACK and MS_FAR.  We won't miss you.
Reviewed-by: NRichard Levitte <levitte@openssl.org>