This extends 'req' to take more than one DN component, and to take
them as full DN components and not just CN values.  All other commands
are changed to pass "CN = $cn" instead of just a CN value.

This adds 'genpc', which differs from the other 'gen*' commands by not
calling 'req', and expect the result from 'req' to come through stdin.

Finally, test/certs/setup.sh gets the commands needed to generate a
few proxy certificates.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

While travelling up the certificate chain, the internal
proxy_path_length must be updated with the pCPathLengthConstraint
value, or verification will not work properly.  This corresponds to
RFC 3820, 4.1.4 (a).
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

The subject name MUST be the same as the issuer name, with a single CN
entry added.

RT#1852
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1194)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1194)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1233)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1231)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reorder arguments to follow convention.

Also allow r/s to be NULL in DSA_SIG_get0, similarly to ECDSA_SIG_get0.

This complements GH1193 which adds non-const setters.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

This encompasses what was previously tested.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

RT#4578
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The previous change for Windows wasn't quite right.  Corrected to use
%HOME%, %USERPROFILE% and %SYSTEMPROFILE%, in that order.

Also adding the default home for VMS, SYS$LOGIN:
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Better than losing the const qualifier.

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Update e_os2.h so that inttypes.h is included.

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Changing the type of the |str| variable in asn1pars enables us to remove
4 casts with just 1. This silences an OpenBSD warning along the way.

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

EVP_MDs are always const, so stacks of them should be too. This silences
a warning about type punning on OpenBSD.

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add const qualifiers to lots of SRP stuff. This started out as an effort
to silence some "type-punning" warnings on OpenBSD...but the fix was to
have proper const correctness in SRP.

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

RT4378
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Previously we would try %RANDFILE%, then %HOME% and finally "C:".
Unfortunately this often ends up being "C:" which the user may not
have write permission for.

Now we try %RANDFILE% first, and then the same set of environment vars
as GetTempFile() uses, i.e. %TMP%, then %TEMP%, %USERPROFILE% and
%SYSTEMROOT%. If all else fails we fall back to %HOME% and only then "C:".
Reviewed-by: NRich Salz <rsalz@openssl.org>

- User targets are now the same and generally do the same things
- configdata.pm depends on exactly the same files on all platforms
- VMS production of shared libraries is simplified
- VMS automatic dependency files get the extension .D rather than .MMS
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1219)

mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Aggregate local initializers are rarely portable (:
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)

This reverts commit 9c1a9ccf.

TerminateProcess is asynchronous, so the code as written in the above
commit is not correct. It is also probably not needed in the speed
case. Reverting in order to figure out the correct solution.
Reviewed-by: NRich Salz <rsalz@openssl.org>

On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.

We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.

This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: NRichard Levitte <levitte@openssl.org>