- 30 1月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
The lflags configuration had a weird syntax with a % as separator. If it was present, whatever came before ended up as PEX_LIBS in Makefile (usually, this is LDFLAGS), while whatever came after ended up as EX_LIBS. This change splits that item into lflags and ex_libs, making their use more explicit. Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
This reverts commit a450326e. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 29 1月, 2016 2 次提交
-
-
由 Rich Salz 提交于
This is a followin from !1738, we no longer need those variables. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 28 1月, 2016 3 次提交
-
-
由 Rich Salz 提交于
Also cleaned up bn_prime.pl to current coding style. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Rich Salz 提交于
Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Richard Levitte 提交于
A mistake was made and the setting of this config variable got reverted to an older behavior. This restores the latest. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 27 1月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 26 1月, 2016 8 次提交
-
-
由 Richard Levitte 提交于
Enhances the routines in OpenSSL::Test::Utils for checking disabled stuff to get their information directly from Configure instead of 'openssl list -disabled'. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
- Small rearrangement of the TABLE and HASH printouts, and adding printout of the "build_scheme" item - Renamed "engines_obj" to "padlock_obj" - Moved the runs of dofile down... it didn't quite make sense to have that in the middle of a printout Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Now that we're using templates, we should warn people not to edit the resulting file. We do it through util/dofile.pl, which is enhanced with an option to tell what file it was called from. We also change the calls so the template files are on the command line instead of being redirected through standard input. That way, we can display something like this (example taken from include/openssl/opensslconf.h): /* WARNING: do not edit! */ /* Generated by Configure from include/openssl/opensslconf.h.in */ Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
The goal is Makefile, not Makefile.new Remove the second generation of opensslconf.h Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
There are two versions of print_table_entry() in Configure. Remove the older. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
The config for the removed GOST engine reappeared by mistake. Now removed again. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
It is time for Makefile.org to fold into the new regime and have a run through util/dofile.pl. This forces some information out of there and into Configure, which isn't a bad thing, it makes Configure increasingly the center of build information, which is as it should be. A few extra defaults were needed in the BASE template to get rid of warnings about missing values. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 25 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Move opensslconf.h.in to include/openssl. Split off DES,BN,RC4 stuff into separate header file templates in crypto/include/internal/*_conf.h.in Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 24 1月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Now that configdata.pm is the centre of information, use that instead of Makefile to figure out reconfiguration parameters. This will help future development with different Makefile file names. The code to read necessary configuration data from Makefile is retained for an easy transition to configdata.pm based information gathering. It will be removed later on. This change includes moving the variable $cross_compile_prefix to %config. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 23 1月, 2016 5 次提交
-
-
由 Ben Laurie 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
The turn has come to have crypto/opensslconf.h.in get run through util/dofile.pl. The consequence is that a large number of variables get moved to the %config table. Also, the string variables $openssl_*, which were populated with cpp lines, all being of the form "#define SOMETHING", were converted into ARRAY refs in %config values, containing just the list of macros to be defined. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
For this adaptation, the variables $options and $version needed to move to %config in Configure, and why not move all other variables holding diverse version numbers at the same time? Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
It's time for print_table_entry to get a bit of refreshment. The way it was put together, we needed to maintain the list of known configuration keys of interest twice, in different shapes. This is error prone, so move the list of strings to a common list for all printing cases, and use simple formatting of lines to do the actual printout based on that list. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 22 1月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
Time to get rid of @MK1MF_Builds and introduce a more flexible 'build_scheme' configuration key. Its value may be a string or an array of strings, meaning we need to teach resolve_config how to handle ARRAY referenses. The build scheme is a word that selects a function to create the appropriate result files for a certain configuration. Currently valid build schemes aer "mk1mf" and "unixmake", the plan is however to add at least one other for a more universal build scheme. Incidently, this also adds the functions 'add' and 'add_before', which can be used in a configuration, so instead of having to repeatedly write a sub like this: key1 => sub { join(" ", @_, "myvalues"); }, key2 => sub { join(" ", "myvalues", @_); }, one could write this: key1 => add(" ", "myvalues"), key2 => add_before(" ", "myvalues"), The good point with 'add' and 'add_before' is that they handle inheritances where the values are a misture of scalars and ARRAYs. If there are any ARRAY to be found, the resulting value will be an ARRAY, otherwise it will be a scalar with all the incoming valued joined together with the separator given as first argument to add/add_before. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Move the documentation of the target configuration form to Configurations/README. Move initial assembler object templates to Configurations/00-BASE-templates.conf. Furthermore, remove all variables containing the names of the non-assembler object files and make a BASE template of them instead. The values from this templates are used as defaults as is. The remaining manipulation of data when assembler modules are used is done only when $no_asm is false. While doing this, clean out some other related variables that aren't used anywhere. Also, we had to move the resolution of the chosen target a bit, or the function 'asm' would never catch a true $no_asm... this hasn't mattered before we've moved it all to the BASE template, but now it does. At the same time, add the default for the 'unistd' key to the BASE template. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
--prefix is now exclusively used for software and manual installation. --openssldir is not exclusively used as a default location for certs, keys and the default openssl.cnf. This change is made to bring clarity, to have the two less intertwined, and to be more compatible with the usual ways of software installation. Please change your habits and scripts to use --prefix rather than --openssldir for installation location now. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 21 1月, 2016 6 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
It's time to refactor the handling of %disabled so that all information of value is in the same place. We have so far had a few cascading disable rules in form of code, far away from %disabled. Instead, bring that information to the array @disable_cascade, which is a list of pairs of the form 'test => descendents'. The test part can be a string, and it's simply checked if that string is a key in %disabled, or it can be a CODEref to do a more complex test. If the test comes true, then all descendents are disabled. This check is performed until there are no more things that need to be disabled. Also, $default_depflags is constructed from the information in %disabled instead of being a separate string. While a string of its own is visually appealing, it's much too easy to forget to update it when something is changed in %disabled. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
The way the "reconf"/"reconfigure" argument is handled is overly complicated. Just grep for it first, and if it is there in the current arguments, get the old command line arguments from Makefile. While we're at it, make the Makefile variable CONFIGURE_ARGS hold the value as a perl list of strings. This makes things much safer in case one of the arguments would contain a space. Since CONFIGURE_ARGS is used for nothing else, there's no harm in this. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
Split the read_config function into read_config that ONLY reads the configuration files but doesn't try to resolve any of the inheritances, and resolve_config which resolves the inheritance chain of a given target. Move them to the bottom of Configure, with the rest of the helpers. Have a new small hash table, %target, which will hold the values for the target the user requested. This also means that all access to the current target data can be reduced from '$table{$target}->{key}' to a mere '$target{key}'. While we're at it, the old string formatted configurations are getting obsolete, so they may as well get deprecated entirely. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Get rid of the --test-sanity option. Since we no longer have string based configurations, we don't have the problem with miscounting colons any more. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Start simple, removed some unused variables and change all '<<EOF' to '<<"EOF"'. The latter is because some code colorizers (notably, in emacs) cannot recognise the here document end marker unless it's quoted and therefore assume the rest of the file is part of the here document. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 1月, 2016 2 次提交
-
-
由 Matt Caswell 提交于
The GOST engine is now out of date and is removed by this commit. An up to date GOST engine is now being maintained in an external repository. See: https://wiki.openssl.org/index.php/BinariesReviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
For BSD systems, Configure adds a shared_ldflags including a reference to the Makefile variable LIBRPATH, but since it must be passed down to Makefile.shared, care must be taken so the value of LIBRPATH doesn't get expanded too early, or it ends up giving an empty string. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 19 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just TLS 1.2. In the future they might want to disable TLS 1.2 and enable just TLS 1.3, ... This commit makes it possible to disable any or all of the TLS or DTLS protocols. It also considerably simplifies the SSL/TLS tests, by auto-generating the min/max version tests based on the set of supported protocols (425 explicitly written out tests got replaced by two loops that generate all 425 tests if all protocols are enabled, fewer otherwise). Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 15 1月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
The previous 'Relax the requirements for a debug build' commit had an extra line of code that shouldn't have been there. This fixes it. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Benjamin Kaduk 提交于
The entropy-gathering daemon is used only on a small number of machines. Provide a configure knob so that EGD support can be disabled by default but re-enabled on those systems that do need it. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Richard Levitte 提交于
We required that a target be named 'debug-something' or to have at least one of the configuration items debug_cflags and debug_lflags for --debug to be accepted. However, there are targets with no such markings but that will still have debugging capabilities. This is particularly true for mk1mf builds, where the extra flags for debugging are figured out later on by util/mk1mf.pl. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 14 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
For some strange reason opensslconf.h was only defining DES_LONG when included via des.h, but that's exceedingly fragile (as a result of include guards the include via des.h might not actually process the content again). Ripped out the nesting constraint, now always define OSSL_DES_LONG if not already defined. Note, this could just be DES_LONG, but trying to avoid exposing DES_LONG in places where it has never been seen before, so it is up to des.h to actually define DES_LONG as OSSL_DES_LONG. Reviewed-by: NRich Salz <rsalz@openssl.org>
-