- 17 7月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
-
- 19 10月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
In apps/apps.c, one can set up an engine with setup_engine(). However, we freed the structural reference immediately, which means that for engines that don't already have a structural reference somewhere else (because it's a built in engine), we end up returning an invalid reference. Instead, the function release_engine() is added, and called at the end of the routines that call setup_engine(). Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1643)
-
- 15 10月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
-
- 01 6月, 2016 1 次提交
-
-
由 Rich Salz 提交于
RT2630 -- segfault for int overlow RT2877 -- check return values in apps/rand Update CHANGES file for previous "windows rand" changes. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 12 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Implement range-checking in all counts in apps. Turns out only a couple of cases were missing. And make the range-checking code more strict. Replace almost all opt_ulong() calls with opt_long() Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 13 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 9月, 2015 2 次提交
-
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
Most of all, we needed to sort out which ones are binary and which ones are text, and make sure they are treated accordingly and consistently so Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 26 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 31 12月, 2014 1 次提交
-
-
由 Tim Hudson 提交于
indent will not alter them when reformatting comments Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 12 6月, 2010 1 次提交
-
-
由 Ben Laurie 提交于
-
- 02 2月, 2009 2 次提交
-
-
由 Bodo Möller 提交于
-
由 Bodo Möller 提交于
PR: 1831 Submitted by: Damien Miller
-
- 13 8月, 2007 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 30 10月, 2003 1 次提交
-
-
由 Geoff Thorpe 提交于
I have tried to convert 'len' type variable declarations to unsigned as a means to address these warnings when appropriate, but when in doubt I have used casts in the comparisons instead. The better solution (that would get us all lynched by API users) would be to go through and convert all the function prototypes and structure definitions to use unsigned variables except when signed is necessary. The proliferation of (signed) "int" for strictly non-negative uses is unfortunate.
-
- 31 1月, 2003 1 次提交
-
-
由 Richard Levitte 提交于
PR: 287
-
- 04 12月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
exit() in whatever way works for the intended platform, and define OPENSSL_EXIT() to have the old meaning (the name is of course because it's only used in the openssl program)
-
- 22 2月, 2002 1 次提交
-
-
由 Dr. Stephen Henson 提交于
CONF_modules_unload() now calls CONF_modules_finish() automatically. Default use of section openssl_conf moved to CONF_modules_load() Load config file in several openssl utilities. Most utilities now load modules from the config file, though in a few (such as version) this isn't done because it couldn't be used for anything. In the case of ca and req the config file used is the same as the utility itself: that is the -config command line option can be used to specify an alternative file.
-
- 21 10月, 2001 1 次提交
-
-
由 Bodo Möller 提交于
New macros SSL[_CTX]_set_msg_callback_arg(). Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet). New '-msg' option for 'openssl s_client' and 'openssl s_server' that enable a message callback that displays all protocol messages. In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if client_version is smaller than the protocol version in use. Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the client will at least see that alert. Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic pointer). Add/update some OpenSSL copyright notices.
-
- 12 9月, 2001 1 次提交
-
-
由 Geoff Thorpe 提交于
-
- 24 6月, 2001 1 次提交
-
-
由 Richard Levitte 提交于
to go the monolith way (does anyone do that these days?). NOTE: a few applications are missing in this commit. I've a few more changes in them that I haven't tested yet.
-
- 18 6月, 2001 1 次提交
-
-
由 Richard Levitte 提交于
everywhere.
-
- 20 2月, 2001 1 次提交
-
-
由 Richard Levitte 提交于
missed any. This compiles and runs on Linux, and external applications have no problems with it. The definite test will be to build this on VMS.
-
- 10 2月, 2001 1 次提交
-
-
由 Lutz Jänicke 提交于
-
- 07 2月, 2001 1 次提交
-
-
由 Lutz Jänicke 提交于
-
- 27 10月, 2000 1 次提交
-
-
由 Richard Levitte 提交于
At the same time, add VMS support for Rijndael.
-
- 20 9月, 2000 1 次提交
-
-
由 Richard Levitte 提交于
record-oriented fashion. That means that every write() will write a separate record, which will be read separately by the programs trying to read from it. This can be very confusing. The solution is to put a BIO filter in the way that will buffer text until a linefeed is reached, and then write everything a line at a time, so every record written will be an actual line, not chunks of lines and not (usually doesn't happen, but I've seen it once) several lines in one record. Voila, BIO_f_linebuffer() is born. Since we're so close to release time, I'm making this VMS-only for now, just to make sure no code is needlessly broken by this. After the release, this BIO method will be enabled on all other platforms as well.
-
- 29 6月, 2000 2 次提交
-
-
由 Richard Levitte 提交于
The message to everyone is "Do not hack OpenSSL when stressed"...
-
由 Richard Levitte 提交于
EGD should be used as seeding input, and where the named socket is.
-
- 19 5月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
-
- 14 3月, 2000 1 次提交
-
-
由 Richard Levitte 提交于
-
- 01 3月, 2000 2 次提交
-
-
由 Bodo Möller 提交于
-
由 Bodo Möller 提交于
-