- 17 7月, 2017 1 次提交
-
-
由 Rich Salz 提交于
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
-
- 03 7月, 2017 1 次提交
-
-
由 Richard Levitte 提交于
Instead, make it possible to disable the console reader that's part of the UI module. This makes it possible to use the UI API and other UI methods in environments where the console reader isn't useful. To disable the console reader, configure with 'no-ui-console' / 'disable-ui-console'. 'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' / 'disable-ui-console'. Fixes #3806 Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3820)
-
- 13 6月, 2017 1 次提交
-
-
由 Paul Yang 提交于
Mostly braces and NULL pointer check and also copyright year bump Signed-off-by: NPaul Yang <paulyang.inf@gmail.com> Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3657)
-
- 31 5月, 2017 1 次提交
-
-
由 Paul Yang 提交于
Reformat some indents and braces based on OpenSSL coding style spec. Signed-off-by: NPaul Yang <paulyang.inf@gmail.com> Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3586)
-
- 29 3月, 2017 1 次提交
-
-
由 FdaSilvaYY 提交于
Fix some comments too [skip ci] Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3069)
-
- 28 3月, 2017 1 次提交
-
-
由 Andy Polyakov 提交于
Even though C standard defines 'z' modifier, recent mingw compilers break the contract by defining __STDC_VERSION__ with non-compliant MSVCRT.DLL. In other words we can't use %zu with mingw, but insteadl of cooking Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 03 3月, 2017 1 次提交
-
-
由 edelangh 提交于
CLA: trivial Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2660)
-
- 21 1月, 2017 1 次提交
-
-
由 Gaétan Njinang 提交于
The difference between the AIX MD5 password algorithm and the standard MD5 password algorithm is that in AIX there is no magic string while in the standard MD5 password algorithm the magic string is "$1$" Documentation of '-aixmd5' option of 'openssl passwd' command is added. 1 test is added in test/recipes/20-test-passwd.t Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2251)
-
- 15 10月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
-
- 15 9月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
RT#4674 issue 2 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 14 9月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
RT#4674 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 01 8月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
do_passwd() was returning 0 on success and 1 on failure. However, those values were interpreted the other way around. The fix that makes the most sense is to change what do_passwd() returns. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 7月, 2016 2 次提交
-
-
由 FdaSilvaYY 提交于
Fix some code indentation Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
由 FdaSilvaYY 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1284)
-
- 15 7月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 27 4月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
Passing the -stdin arg to the passwd command line app *and* supply a password on the command line causes a seg fault. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 31 3月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 17 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} Add #define's for the old names. Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 08 12月, 2015 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 13 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 9月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 16 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
When generating a private key, try to make the output file be readable only by the owner. Put it in CHANGES file since it might be noticeable. Add "int private" flag to apps that write private keys, and check that it's set whenever we do write a private key. Checked via assert so that this bug (security-related) gets fixed. Thanks to Viktor for help in tracing the code-paths where private keys are written. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 10 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Except for VMS startup code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Here are the "rules" for handling flags that depend on #ifdef: - Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd entries appear at the end; by convention "engine" is last. This ensures that at run-time, the flag will never be recognized/allowed. The next two bullets entries are for silencing compiler warnings: - In the while/switch parsing statement, use #ifdef for the body to disable it; leave the "case OPT_xxx:" and "break" statements outside the ifdef/ifndef. See ciphers.c for example. - If there are multiple options controlled by a single guard, OPT_FOO, OPT_BAR, etc., put a an #ifdef around the set, and then do "#else" and a series of case labels and a break. See OPENSSL_NO_AES in cms.c for example. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 01 5月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
No point in proceeding if you're out of memory. So change *all* OPENSSL_malloc calls in apps to use the new routine which prints a message and exits. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 2 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Ensure RAND_bytes return value is checked correctly, and that we no longer use RAND_pseudo_bytes. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 22 1月, 2015 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 31 12月, 2014 1 次提交
-
-
由 Tim Hudson 提交于
indent will not alter them when reformatting comments Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 6月, 2005 1 次提交
-
-
由 Ben Laurie 提交于
-
- 06 4月, 2005 1 次提交
-
-
由 Nils Larsch 提交于
-
- 30 10月, 2003 1 次提交
-
-
由 Geoff Thorpe 提交于
I have tried to convert 'len' type variable declarations to unsigned as a means to address these warnings when appropriate, but when in doubt I have used casts in the comparisons instead. The better solution (that would get us all lynched by API users) would be to go through and convert all the function prototypes and structure definitions to use unsigned variables except when signed is necessary. The proliferation of (signed) "int" for strictly non-negative uses is unfortunate.
-