- 16 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
When generating a private key, try to make the output file be readable only by the owner. Put it in CHANGES file since it might be noticeable. Add "int private" flag to apps that write private keys, and check that it's set whenever we do write a private key. Checked via assert so that this bug (security-related) gets fixed. Thanks to Viktor for help in tracing the code-paths where private keys are written. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 10 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Except for VMS startup code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Here are the "rules" for handling flags that depend on #ifdef: - Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd entries appear at the end; by convention "engine" is last. This ensures that at run-time, the flag will never be recognized/allowed. The next two bullets entries are for silencing compiler warnings: - In the while/switch parsing statement, use #ifdef for the body to disable it; leave the "case OPT_xxx:" and "break" statements outside the ifdef/ifndef. See ciphers.c for example. - If there are multiple options controlled by a single guard, OPT_FOO, OPT_BAR, etc., put a an #ifdef around the set, and then do "#else" and a series of case labels and a break. See OPENSSL_NO_AES in cms.c for example. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 01 5月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
No point in proceeding if you're out of memory. So change *all* OPENSSL_malloc calls in apps to use the new routine which prints a message and exits. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 2 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Ensure RAND_bytes return value is checked correctly, and that we no longer use RAND_pseudo_bytes. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 22 1月, 2015 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 31 12月, 2014 1 次提交
-
-
由 Tim Hudson 提交于
indent will not alter them when reformatting comments Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 6月, 2005 1 次提交
-
-
由 Ben Laurie 提交于
-
- 06 4月, 2005 1 次提交
-
-
由 Nils Larsch 提交于
-
- 30 10月, 2003 1 次提交
-
-
由 Geoff Thorpe 提交于
I have tried to convert 'len' type variable declarations to unsigned as a means to address these warnings when appropriate, but when in doubt I have used casts in the comparisons instead. The better solution (that would get us all lynched by API users) would be to go through and convert all the function prototypes and structure definitions to use unsigned variables except when signed is necessary. The proliferation of (signed) "int" for strictly non-negative uses is unfortunate.
-
- 04 12月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
exit() in whatever way works for the intended platform, and define OPENSSL_EXIT() to have the old meaning (the name is of course because it's only used in the openssl program)
-
- 14 10月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
the same source file.
-
- 22 3月, 2002 1 次提交
-
-
由 Richard Levitte 提交于
-
- 22 2月, 2002 1 次提交
-
-
由 Dr. Stephen Henson 提交于
CONF_modules_unload() now calls CONF_modules_finish() automatically. Default use of section openssl_conf moved to CONF_modules_load() Load config file in several openssl utilities. Most utilities now load modules from the config file, though in a few (such as version) this isn't done because it couldn't be used for anything. In the case of ca and req the config file used is the same as the utility itself: that is the -config command line option can be used to specify an alternative file.
-
- 25 10月, 2001 1 次提交
-
-
由 Richard Levitte 提交于
libdes (which is still used out there) or other des implementations, the OpenSSL DES functions are renamed to begin with DES_ instead of des_. Compatibility routines are provided and declared by including openssl/des_old.h. Those declarations are the same as were in des.h when the OpenSSL project started, which is exactly how libdes looked at that time, and hopefully still looks today. The compatibility functions will be removed in some future release, at the latest in version 1.0.
-
- 16 10月, 2001 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Retain compatibility of EVP_DigestInit() and EVP_DigestFinal() with existing code. Modify library to use digest *_ex() functions.
-
- 31 7月, 2001 1 次提交
-
-
由 Ben Laurie 提交于
-
- 24 6月, 2001 1 次提交
-
-
由 Richard Levitte 提交于
to go the monolith way (does anyone do that these days?). NOTE: a few applications are missing in this commit. I've a few more changes in them that I haven't tested yet.
-
- 20 6月, 2001 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Change all calls to low level digest routines in the library and applications to use EVP. Add missing calls to HMAC_cleanup() and don't assume HMAC_CTX can be copied using memcpy(). Note: this is almost identical to the patch submitted to openssl-dev by Verdon Walker <VWalker@novell.com> except some redundant EVP_add_digest_()/EVP_cleanup() calls were removed and some changes made to avoid compiler warnings.
-
- 14 3月, 2001 1 次提交
-
-
由 Bodo Möller 提交于
-
- 20 2月, 2001 2 次提交
-
-
由 Richard Levitte 提交于
missed any. This compiles and runs on Linux, and external applications have no problems with it. The definite test will be to build this on VMS.
-
由 Richard Levitte 提交于
sure they are available in opensslconf.h, by giving them names starting with "OPENSSL_" to avoid conflicts with other packages and by making sure e_os2.h will cover all platform-specific cases together with opensslconf.h. I've checked fairly well that nothing breaks with this (apart from external software that will adapt if they have used something like NO_KRB5), but I can't guarantee it completely, so a review of this change would be a good thing.
-
- 19 1月, 2001 1 次提交
-
-
由 Bodo Möller 提交于
-
- 17 11月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
password verification where it makes sense.
-
- 20 9月, 2000 1 次提交
-
-
由 Richard Levitte 提交于
record-oriented fashion. That means that every write() will write a separate record, which will be read separately by the programs trying to read from it. This can be very confusing. The solution is to put a BIO filter in the way that will buffer text until a linefeed is reached, and then write everything a line at a time, so every record written will be an actual line, not chunks of lines and not (usually doesn't happen, but I've seen it once) several lines in one record. Voila, BIO_f_linebuffer() is born. Since we're so close to release time, I'm making this VMS-only for now, just to make sure no code is needlessly broken by this. After the release, this BIO method will be enabled on all other platforms as well.
-
- 31 7月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
-
- 24 6月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
(Still needs to be tested against the original using sample passwords of different length.)
-
- 02 6月, 2000 1 次提交
-
-
由 Richard Levitte 提交于
like Malloc, Realloc and especially Free conflict with already existing names on some operating systems or other packages. That is reason enough to change the names of the OpenSSL memory allocation macros to something that has a better chance of being unique, like prepending them with OPENSSL_. This change includes all the name changes needed throughout all C files.
-
- 27 4月, 2000 2 次提交
-
-
由 Bodo Möller 提交于
is not constant.
-
由 Bodo Möller 提交于
the password prompt.
-
- 24 2月, 2000 1 次提交
-
-
由 Ralf S. Engelschall 提交于
-
- 21 2月, 2000 1 次提交
-
-
由 Ulf Möller 提交于
-
- 18 2月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
-
- 16 2月, 2000 1 次提交
-
-
由 Ben Laurie 提交于
-
- 12 2月, 2000 1 次提交
-
-
由 Bodo Möller 提交于
-