- 26 1月, 2016 11 次提交
-
-
由 Richard Levitte 提交于
engines_obj changed name to padlock_obj in Configure. We need to do the corresponding ENGINES_ASM_OBJ -> PADLOCK_ASM_OBJ in appropriate Makefile.ins. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
- Small rearrangement of the TABLE and HASH printouts, and adding printout of the "build_scheme" item - Renamed "engines_obj" to "padlock_obj" - Moved the runs of dofile down... it didn't quite make sense to have that in the middle of a printout Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Now that we're using templates, we should warn people not to edit the resulting file. We do it through util/dofile.pl, which is enhanced with an option to tell what file it was called from. We also change the calls so the template files are on the command line instead of being redirected through standard input. That way, we can display something like this (example taken from include/openssl/opensslconf.h): /* WARNING: do not edit! */ /* Generated by Configure from include/openssl/opensslconf.h.in */ Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
The goal is Makefile, not Makefile.new Remove the second generation of opensslconf.h Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
There are two versions of print_table_entry() in Configure. Remove the older. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
The config for the removed GOST engine reappeared by mistake. Now removed again. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
It is time for Makefile.org to fold into the new regime and have a run through util/dofile.pl. This forces some information out of there and into Configure, which isn't a bad thing, it makes Configure increasingly the center of build information, which is as it should be. A few extra defaults were needed in the BASE template to get rid of warnings about missing values. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 25 1月, 2016 4 次提交
-
-
由 Rich Salz 提交于
Move opensslconf.h.in to include/openssl. Split off DES,BN,RC4 stuff into separate header file templates in crypto/include/internal/*_conf.h.in Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Some test programs may depend on more than just one TLS version, for example. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Rich Salz 提交于
This is an internal facility, never documented, not for public consumption. Move it into ssl (where it's only used for DTLS). I also made the typedef's for pqueue and pitem follow our style: they name structures, not pointers. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 24 1月, 2016 8 次提交
-
-
由 Richard Levitte 提交于
The explanation is that it falls back to using tools/c_rehash if 'apps/openssl rehash' isn't supported on the platform at hand. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 FdaSilvaYY 提交于
Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NRich Salz <rsalz@openssl.org> GH: #580
-
由 FdaSilvaYY 提交于
Simplify BUF_MEM init. code Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NRich Salz <rsalz@openssl.org> GH: #580
-
由 Richard Levitte 提交于
Now that configdata.pm is the centre of information, use that instead of Makefile to figure out reconfiguration parameters. This will help future development with different Makefile file names. The code to read necessary configuration data from Makefile is retained for an easy transition to configdata.pm based information gathering. It will be removed later on. This change includes moving the variable $cross_compile_prefix to %config. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Todd Short 提交于
When experimental-store is enabled, it does not compile due to the change to opaque data structures. Change CRYPTO_add() to EVP_PKEY_up_ref() as needed. Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NRich Salz <rsalz@openssl.org> RT: #4263, GH: #579
-
由 mrpre 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 23 1月, 2016 17 次提交
-
-
由 Ben Laurie 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Richard Levitte 提交于
The turn has come to have crypto/opensslconf.h.in get run through util/dofile.pl. The consequence is that a large number of variables get moved to the %config table. Also, the string variables $openssl_*, which were populated with cpp lines, all being of the form "#define SOMETHING", were converted into ARRAY refs in %config values, containing just the list of macros to be defined. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
For this adaptation, the variables $options and $version needed to move to %config in Configure, and why not move all other variables holding diverse version numbers at the same time? Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
This includes a start on how to install missing modules. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Because we're using Text::Template and we know it's a non core Perl module, we choose to bundle it into our source, for convenience. external/perl/Downloaded.txt document what modules we choose to bundle this way and exactly where we downloaded it from. With this changes comes the transfer module for with_fallback. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
For our own convenience, we need a mechanism to be able to fall back on bundled Perl modules. It's a minimal package that's called like this: use with_fallback qw(Module1 Module2 ...); For each module, it will try to require them from the system installation, and failing that, it will temporarly add external/perl and try to require transfer::{ModuleName}. It requires that each bundled Perl modules is accompanied by a small transfer module (external/perl/transfer/ModuleName.pm in our example) that knows exactly what to load. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
It's time for print_table_entry to get a bit of refreshment. The way it was put together, we needed to maintain the list of known configuration keys of interest twice, in different shapes. This is error prone, so move the list of strings to a common list for all printing cases, and use simple formatting of lines to do the actual printout based on that list. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Andy Isaacson 提交于
The code is trying to interpolate the value of the BASE_SECTION macro, but due to excess escaping, it instead prints the string "BASE_SECTION". Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Alex Gaynor 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Richard Levitte 提交于
Some things to ignore need to be properly rooted, and use a bit more precision on ignoring 'lib', as that maybe be a perfectly valid directory name to add into git elsewhere in the source tree. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Alessandro Ghedini 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 mmiyashi 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Michał Trojnara 提交于
Change to reflect changes in dynamic_fns Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Marcus Meissner 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-