Skip to content

O
openssl

btwise / openssl

通知 1
Star 0
Fork 0
O
openssl

体验新版 GitCode，发现更多精彩内容 >>

提交 c87bcdbd 编写于 作者: D Dr. David von Oheimb 提交者： Dr. David von Oheimb
浏览文件
操作

test/recipes: split 81_test_cmp_cli.t, add test using -engine loader_attic 

The HTTP-based tests are now in 80_test_cmp_http.t, to start a little earlier.
This should decrease total test run time due to better parallelization.
Reviewed-by: NTomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13551)
上级 03da39a7
隐藏空白更改
内联 并排
Showing with 321 addition and 286 deletion
test/recipes/80-test_cmp_http.t 0 → 100644
浏览文件 @ c87bcdbd
#! /usr/bin/env perl
# Copyright 2007-2020 The OpenSSL Project Authors. All Rights Reserved.
# Copyright Nokia 2007-2019
# Copyright Siemens AG 2015-2019
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
use POSIX;
use OpenSSL::Test qw/:DEFAULT with data_file data_dir srctop_dir bldtop_dir result_dir/;
use OpenSSL::Test::Utils;
BEGIN {
setup("test_cmp_http");
}
use lib srctop_dir('Configurations');
use lib bldtop_dir('.');
use platform;
plan skip_all => "These tests are not supported in a fuzz build"
if config('options') =~ /-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION/;
plan skip_all => "These tests are not supported in a no-cmp build"
if disabled("cmp");
plan skip_all => "These tests are not supported in a no-ec build"
if disabled("ec");
plan skip_all => "Tests involving local HTTP server not available on Windows or VMS"
if $^O =~ /^(VMS|MSWin32)$/;
plan skip_all => "Tests involving local HTTP server not available in cross-compile builds"
if defined $ENV{EXE_SHELL};
plan skip_all => "Tests involving local HTTP server require 'kill' command"
if system("which kill");
plan skip_all => "Tests involving local HTTP server require 'lsof' command"
if system("which lsof"); # this typically excludes Solaris
sub chop_dblquot { # chop any leading and trailing '"' (needed for Windows)
my $str = shift;
$str =~ s/^\"(.*?)\"$/$1/;
return $str;
}
my $proxy = "<EMPTY>";
$proxy = chop_dblquot($ENV{http_proxy} // $ENV{HTTP_PROXY} // $proxy);
$proxy =~ s{^https?://}{}i;
my $no_proxy = $ENV{no_proxy} // $ENV{NO_PROXY};
my $app = "apps/openssl cmp";
# the CMP server configuration consists of:
my $ca_dn; # The CA's Distinguished Name
my $server_dn; # The server's Distinguished Name
my $server_host;# The server's host name or IP address
my $server_port;# The server's port
my $server_tls; # The server's TLS port, if any, or 0
my $server_path;# The server's CMP alias
my $server_cert;# The server's cert
my $kur_port; # The server's port for kur (cert update)
my $pbm_port; # The server port to be used for PBM
my $pbm_ref; # The reference for PBM
my $pbm_secret; # The secret for PBM
my $column; # The column number of the expected result
my $sleep = 0; # The time to sleep between two requests
# The local $server_name variables below are among others taken as the name of a
# sub-directory with server-specific certs etc. and CA-specific config section.
sub load_config {
my $server_name = shift;
my $section = shift;
my $test_config = $ENV{OPENSSL_CMP_CONFIG} // "$server_name/test.cnf";
open (CH, $test_config) or die "Cannot open $test_config: $!";
my $active = 0;
while (<CH>) {
if (m/\[\s*$section\s*\]/) {
$active = 1;
} elsif (m/\[\s*.*?\s*\]/) {
$active = 0;
} elsif ($active) {
$ca_dn = $1 eq "" ? '""""' : $1 if m/^\s*ca_dn\s*=\s*(.*)?\s*$/;
$server_dn = $1 eq "" ? '""""' : $1 if m/^\s*server_dn\s*=\s*(.*)?\s*$/;
$server_host = $1 eq "" ? '""""' : $1 if m/^\s*server_host\s*=\s*(\S*)?\s*(\#.*)?$/;
$server_port = $1 eq "" ? '""""' : $1 if m/^\s*server_port\s*=\s*(.*)?\s*$/;
$server_tls = $1 eq "" ? '""""' : $1 if m/^\s*server_tls\s*=\s*(.*)?\s*$/;
$server_path = $1 eq "" ? '""""' : $1 if m/^\s*server_path\s*=\s*(.*)?\s*$/;
$server_cert = $1 eq "" ? '""""' : $1 if m/^\s*server_cert\s*=\s*(.*)?\s*$/;
$kur_port = $1 eq "" ? '""""' : $1 if m/^\s*kur_port\s*=\s*(.*)?\s*$/;
$pbm_port = $1 eq "" ? '""""' : $1 if m/^\s*pbm_port\s*=\s*(.*)?\s*$/;
$pbm_ref = $1 eq "" ? '""""' : $1 if m/^\s*pbm_ref\s*=\s*(.*)?\s*$/;
$pbm_secret = $1 eq "" ? '""""' : $1 if m/^\s*pbm_secret\s*=\s*(.*)?\s*$/;
$column = $1 eq "" ? '""""' : $1 if m/^\s*column\s*=\s*(.*)?\s*$/;
$sleep = $1 eq "" ? '""""' : $1 if m/^\s*sleep\s*=\s*(.*)?\s*$/;
}
}
close CH;
die "Cannot find all CMP server config values in $test_config section [$section]\n"
if !defined $ca_dn
|| !defined $server_dn || !defined $server_host
|| !defined $server_port || !defined $server_tls
|| !defined $server_path || !defined $server_cert
|| !defined $kur_port || !defined $pbm_port
|| !defined $pbm_ref || !defined $pbm_secret
|| !defined $column || !defined $sleep;
$server_dn = $server_dn // $ca_dn;
}
my @server_configurations = ("Mock");
@server_configurations = split /\s+/, $ENV{OPENSSL_CMP_SERVER} if $ENV{OPENSSL_CMP_SERVER};
# set env variable, e.g., OPENSSL_CMP_SERVER="Mock Insta" to include further CMP servers
my @all_aspects = ("connection", "verification", "credentials", "commands", "enrollment");
@all_aspects = split /\s+/, $ENV{OPENSSL_CMP_ASPECTS} if $ENV{OPENSSL_CMP_ASPECTS};
# set env variable, e.g., OPENSSL_CMP_ASPECTS="commands enrollment" to select specific aspects
my $faillog;
my $file = $ENV{HARNESS_FAILLOG}; # pathname relative to result_dir
if ($file) {
open($faillog, ">", $file) or die "Cannot open $file for writing: $!";
}
sub test_cmp_http {
my $server_name = shift;
my $aspect = shift;
my $n = shift;
my $i = shift;
my $title = shift;
my $params = shift;
my $expected_exit = shift;
my $path_app = bldtop_dir($app);
with({ exit_checker => sub {
my $actual_exit = shift;
my $OK = $actual_exit == $expected_exit;
if ($faillog && !$OK) {
my $quote_spc_empty = sub { $_ eq "" ? '""' : $_ =~ m/ / ? '"'.$_.'"' : $_ };
my $invocation = "$path_app ".join(' ', map $quote_spc_empty->($_), @$params);
print $faillog "$server_name $aspect \"$title\" ($i/$n)".
" expected=$expected_exit actual=$actual_exit\n";
print $faillog "$invocation\n\n";
}
return $OK; } },
sub { ok(run(cmd([$path_app, @$params,])),
$title); });
}
sub test_cmp_http_aspect {
my $server_name = shift;
my $aspect = shift;
my $tests = shift;
subtest "CMP app CLI $server_name $aspect\n" => sub {
my $n = scalar @$tests;
plan tests => $n;
my $i = 1;
foreach (@$tests) {
test_cmp_http($server_name, $aspect, $n, $i++, $$_[0], $$_[1], $$_[2]);
sleep($sleep);
}
};
# not unlinking test.certout*.pem, test.cacerts.pem, and test.extracerts.pem
}
# The input files for the tests done here dynamically depend on the test server
# selected (where the Mock server used by default is just one possibility).
# On the other hand the main test configuration file test.cnf, which references
# several server-dependent input files by relative file names, is static.
# Moreover the tests use much greater variety of input files than output files.
# Therefore we chose the current directory as a subdirectory of $SRCTOP and it
# was simpler to prepend the output file names by BLDTOP than doing the tests
# from $BLDTOP/test-runs/test_cmp_http and prepending the input files by SRCTOP.
indir data_dir() => sub {
plan tests => @server_configurations * @all_aspects
+ (grep(/^Mock$/, @server_configurations)
&& grep(/^certstatus$/, @all_aspects));
foreach my $server_name (@server_configurations) {
$server_name = chop_dblquot($server_name);
load_config($server_name, $server_name);
{
my $pid;
if ($server_name eq "Mock") {
indir "Mock" => sub {
$pid = start_mock_server("");
skip "Cannot start or find the started CMP mock server",
scalar @all_aspects unless $pid;
}
}
foreach my $aspect (@all_aspects) {
$aspect = chop_dblquot($aspect);
next if $server_name eq "Mock" && $aspect eq "certstatus";
load_config($server_name, $aspect); # update with any aspect-specific settings
indir $server_name => sub {
my $tests = load_tests($server_name, $aspect);
test_cmp_http_aspect($server_name, $aspect, $tests);
};
};
stop_mock_server($pid) if $pid;
}
};
};
close($faillog) if $faillog;
sub load_tests {
my $server_name = shift;
my $aspect = shift;
my $test_config = $ENV{OPENSSL_CMP_CONFIG} // "$server_name/test.cnf";
my $file = data_file("test_$aspect.csv");
my $result_dir = result_dir();
my @result;
open(my $data, '<', $file) || die "Cannot open $file for reading: $!";
LOOP:
while (my $line = <$data>) {
chomp $line;
$line =~ s{\r\n}{\n}g; # adjust line endings
$line =~ s{_CA_DN}{$ca_dn}g;
$line =~ s{_SERVER_DN}{$server_dn}g;
$line =~ s{_SERVER_HOST}{$server_host}g;
$line =~ s{_SERVER_PORT}{$server_port}g;
$line =~ s{_SERVER_TLS}{$server_tls}g;
$line =~ s{_SERVER_PATH}{$server_path}g;
$line =~ s{_SERVER_CERT}{$server_cert}g;
$line =~ s{_KUR_PORT}{$kur_port}g;
$line =~ s{_PBM_PORT}{$pbm_port}g;
$line =~ s{_PBM_REF}{$pbm_ref}g;
$line =~ s{_PBM_SECRET}{$pbm_secret}g;
$line =~ s{_RESULT_DIR}{$result_dir}g;
next LOOP if $server_tls == 0 && $line =~ m/,\s*-tls_used\s*,/;
my $noproxy = $no_proxy;
if ($line =~ m/,\s*-no_proxy\s*,(.*?)(,|$)/) {
$noproxy = $1;
} elsif ($server_host eq "127.0.0.1") {
# do connections to localhost (e.g., Mock server) without proxy
$line =~ s{-section,,}{-section,,-no_proxy,127.0.0.1,} ;
}
if ($line =~ m/,\s*-proxy\s*,/) {
next LOOP if $no_proxy && ($noproxy =~ $server_host);
} else {
$line =~ s{-section,,}{-section,,-proxy,$proxy,};
}
$line =~ s{-section,,}{-section,,-certout,$result_dir/test.cert.pem,};
$line =~ s{-section,,}{-config,../$test_config,-section,$server_name $aspect,};
my @fields = grep /\S/, split ",", $line;
s/^<EMPTY>$// for (@fields); # used for proxy=""
s/^\s+// for (@fields); # remove leading whitespace from elements
s/\s+$// for (@fields); # remove trailing whitespace from elements
s/^\"(\".*?\")\"$/$1/ for (@fields); # remove escaping from quotation marks from elements
my $expected_exit = $fields[$column];
my $description = 1;
my $title = $fields[$description];
next LOOP if (!defined($expected_exit)
|| ($expected_exit ne 0 && $expected_exit ne 1));
@fields = grep {$_ ne 'BLANK'} @fields[$description + 1 .. @fields - 1];
push @result, [$title, \@fields, $expected_exit];
}
close($data);
return \@result;
}
sub mock_server_pid {
return `lsof -iTCP:$server_port` =~ m/\n\S+\s+(\d+)\s+[^\n]+LISTEN/s ? $1 : 0;
}
sub start_mock_server {
my $args = $_[0]; # optional further CLI arguments
my $dir = bldtop_dir("");
my $cmd = "LD_LIBRARY_PATH=$dir DYLD_LIBRARY_PATH=$dir " .
bldtop_dir($app) . " -config server.cnf $args";
my $pid = mock_server_pid();
return $pid if $pid; # already running
return system("$cmd &") == 0 # start in background, check for success
? (sleep 1, mock_server_pid()) : 0;
}
sub stop_mock_server {
my $pid = $_[0];
system("kill $pid") if $pid;
}
test/recipes/81-test_cmp_cli.t
浏览文件 @ c87bcdbd
......@@ -12,11 +12,9 @@ use strict;
use warnings;
use POSIX;
use File::Spec::Functions qw/catfile/;
use File::Compare qw/compare_text/;
use OpenSSL::Test qw/:DEFAULT with data_file data_dir srctop_dir bldtop_dir result_dir result_file/;
use OpenSSL::Test qw/:DEFAULT with srctop_file srctop_dir bldtop_dir result_file/;
use OpenSSL::Test::Utils;
use Data::Dumper; # for debugging purposes only
BEGIN {
setup("test_cmp_cli");
......@@ -29,303 +27,56 @@ plan skip_all => "These tests are not supported in a fuzz build"
plan skip_all => "These tests are not supported in a no-cmp build"
if disabled("cmp");
plan skip_all => "These tests are not supported in a no-ec build"
if disabled("ec");
plan skip_all => "Tests involving CMP server not available on Windows or VMS"
if $^O =~ /^(VMS|MSWin32)$/;
plan skip_all => "Tests involving CMP server not available in cross-compile builds"
if defined $ENV{EXE_SHELL};
plan skip_all => "Tests involving CMP server require 'kill' command"
if system("which kill");
plan skip_all => "Tests involving CMP server require 'lsof' command"
if system("which lsof"); # this typically excludes Solaris
sub chop_dblquot { # chop any leading & trailing '"' (needed for Windows)
my $str = shift;
$str =~ s/^\"(.*?)\"$/$1/;
return $str;
}
my $proxy = "<EMPTY>";
$proxy = chop_dblquot($ENV{http_proxy} // $ENV{HTTP_PROXY} // $proxy);
$proxy =~ s{^https?://}{}i;
my $no_proxy = $ENV{no_proxy} // $ENV{NO_PROXY};
my $app = "apps/openssl cmp";
my $app = bldtop_dir("apps/openssl cmp");
my @cmp_basic_tests = (
[ "show help", [ "-config", '""', "-help" ], 0 ],
[ "CLI option not starting with '-'", [ "-config", '""', "days", "1" ], 1 ],
[ "unknown CLI option", [ "-config", '""', "-dayss" ], 1 ],
[ "bad int syntax: non-digit", [ "-config", '""', "-days", "a/" ], 1 ],
[ "bad int syntax: float", [ "-config", '""', "-days", "3.14" ], 1 ],
[ "bad int syntax: trailing garbage", [ "-config", '""', "-days", "314_+" ], 1 ],
[ "bad int: out of range", [ "-config", '""', "-days", "2147483648" ], 1 ],
);
[ "show help", [ "-help" ], 1 ],
[ "CLI option not starting with '-'", [ "days", "1" ], 0 ],
[ "unknown CLI option", [ "-dayss" ], 0 ],
[ "bad int syntax: non-digit", [ "-days", "a/" ], 0 ],
[ "bad int syntax: float", [ "-days", "3.14" ], 0 ],
[ "bad int syntax: trailing garbage", [ "-days", "314_+" ], 0 ],
[ "bad int: out of range", [ "-days", "2147483648" ], 0 ],
);
my @cmp_server_tests = (
[ "with polling", [ "-poll_count", "1" ], 1 ],
[ "with loader_attic engine", [ "-engine", "loader_attic"],
!disabled('dynamic-engine') &&
!disabled("deprecated-3.0") ]
);
plan tests => @cmp_basic_tests + @cmp_server_tests;
foreach (@cmp_basic_tests) {
my $title = $$_[0];
my $params = $$_[1];
my $expected = $$_[2];
ok($expected == run(cmd([$app, "-config", '""', @$params])),
$title);
}
# this uses the mock server directly in the cmp app, without TCP
sub use_mock_srv_internally
{
# these use the mock server directly in the cmp app, without TCP
foreach (@cmp_server_tests) {
my $title = $$_[0];
my $extra_args = $$_[1];
my $expected = $$_[2];
my $secret = "pass:test";
my $rsp_cert = "signer_only.crt";
my $rsp_cert = srctop_file('test', 'certs', 'ee-cert-1024.pem');
my $outfile = result_file("test.certout.pem");
ok(run(cmd([bldtop_dir($app),
"-config", '""',
ok($expected ==
run(cmd([$app, "-config", '""', @$extra_args,
"-use_mock_srv", "-srv_ref", "mock server",
"-srv_cert", "server.crt", # used for setting sender
"-srv_secret", $secret,
"-poll_count", "1",
"-rsp_cert", $rsp_cert,
"-cmd", "cr",
"-subject", "/CN=any",
"-newkey", "signer.key",
"-recipient", "/O=openssl_cmp", # if given must be consistent with sender
"-newkey", srctop_file('test', 'certs', 'ee-key-1024.pem'),
"-secret", $secret,
"-ref", "client under test",
"-certout", $outfile]))
&& compare_text($outfile, $rsp_cert) == 0,
"CMP app with -use_mock_srv and -poll_count 1");
$title);
# not unlinking $outfile
}
# the CMP server configuration consists of:
my $ca_dn; # The CA's Distinguished Name
my $server_dn; # The server's Distinguished Name
my $server_host;# The server's host name or IP address
my $server_port;# The server's port
my $server_tls; # The server's TLS port, if any, or 0
my $server_path;# The server's CMP alias
my $server_cert;# The server's cert
my $kur_port; # The server's port for kur (cert update)
my $pbm_port; # The server port to be used for PBM
my $pbm_ref; # The reference for PBM
my $pbm_secret; # The secret for PBM
my $column; # The column number of the expected result
my $sleep = 0; # The time to sleep between two requests
# The local $server_name variables below are among others taken as the name of a
# sub-directory with server-specific certs etc. and CA-specific config section.
sub load_config {
my $server_name = shift;
my $section = shift;
my $test_config = $ENV{OPENSSL_CMP_CONFIG} // "$server_name/test.cnf";
open (CH, $test_config) or die "Cannot open $test_config: $!";
my $active = 0;
while (<CH>) {
if (m/\[\s*$section\s*\]/) {
$active = 1;
} elsif (m/\[\s*.*?\s*\]/) {
$active = 0;
} elsif ($active) {
$ca_dn = $1 eq "" ? '""""' : $1 if m/^\s*ca_dn\s*=\s*(.*)?\s*$/;
$server_dn = $1 eq "" ? '""""' : $1 if m/^\s*server_dn\s*=\s*(.*)?\s*$/;
$server_host = $1 eq "" ? '""""' : $1 if m/^\s*server_host\s*=\s*(\S*)?\s*(\#.*)?$/;
$server_port = $1 eq "" ? '""""' : $1 if m/^\s*server_port\s*=\s*(.*)?\s*$/;
$server_tls = $1 eq "" ? '""""' : $1 if m/^\s*server_tls\s*=\s*(.*)?\s*$/;
$server_path = $1 eq "" ? '""""' : $1 if m/^\s*server_path\s*=\s*(.*)?\s*$/;
$server_cert = $1 eq "" ? '""""' : $1 if m/^\s*server_cert\s*=\s*(.*)?\s*$/;
$kur_port = $1 eq "" ? '""""' : $1 if m/^\s*kur_port\s*=\s*(.*)?\s*$/;
$pbm_port = $1 eq "" ? '""""' : $1 if m/^\s*pbm_port\s*=\s*(.*)?\s*$/;
$pbm_ref = $1 eq "" ? '""""' : $1 if m/^\s*pbm_ref\s*=\s*(.*)?\s*$/;
$pbm_secret = $1 eq "" ? '""""' : $1 if m/^\s*pbm_secret\s*=\s*(.*)?\s*$/;
$column = $1 eq "" ? '""""' : $1 if m/^\s*column\s*=\s*(.*)?\s*$/;
$sleep = $1 eq "" ? '""""' : $1 if m/^\s*sleep\s*=\s*(.*)?\s*$/;
}
}
close CH;
die "Cannot find all CMP server config values in $test_config section [$section]\n"
if !defined $ca_dn
|| !defined $server_dn || !defined $server_host
|| !defined $server_port || !defined $server_tls
|| !defined $server_path || !defined $server_cert
|| !defined $kur_port || !defined $pbm_port
|| !defined $pbm_ref || !defined $pbm_secret
|| !defined $column || !defined $sleep;
$server_dn = $server_dn // $ca_dn;
}
my @server_configurations = ("Mock");
@server_configurations = split /\s+/, $ENV{OPENSSL_CMP_SERVER} if $ENV{OPENSSL_CMP_SERVER};
# set env variable, e.g., OPENSSL_CMP_SERVER="Mock Insta" to include further CMP servers
my @all_aspects = ("connection", "verification", "credentials", "commands", "enrollment");
@all_aspects = split /\s+/, $ENV{OPENSSL_CMP_ASPECTS} if $ENV{OPENSSL_CMP_ASPECTS};
# set env variable, e.g., OPENSSL_CMP_ASPECTS="commands enrollment" to select specific aspects
my $faillog;
if ($ENV{HARNESS_FAILLOG}) {
my $file = $ENV{HARNESS_FAILLOG};
open($faillog, ">", $file) or die "Cannot open $file for writing: $!";
}
sub test_cmp_cli {
my $server_name = shift;
my $aspect = shift;
my $n = shift;
my $i = shift;
my $title = shift;
my $params = shift;
my $expected_exit = shift;
my $path_app = bldtop_dir($app);
with({ exit_checker => sub {
my $actual_exit = shift;
my $OK = $actual_exit == $expected_exit;
if ($faillog && !$OK) {
my $quote_spc_empty = sub { $_ eq "" ? '""' : $_ =~ m/ / ? '"'.$_.'"' : $_ };
my $invocation = "$path_app ".join(' ', map $quote_spc_empty->($_), @$params);
print $faillog "$server_name $aspect \"$title\" ($i/$n)".
" expected=$expected_exit actual=$actual_exit\n";
print $faillog "$invocation\n\n";
}
return $OK; } },
sub { ok(run(cmd([$path_app, @$params,])),
$title); });
}
sub test_cmp_cli_aspect {
my $server_name = shift;
my $aspect = shift;
my $tests = shift;
subtest "CMP app CLI $server_name $aspect\n" => sub {
my $n = scalar @$tests;
plan tests => $n;
my $i = 1;
foreach (@$tests) {
SKIP: {
test_cmp_cli($server_name, $aspect, $n, $i++, $$_[0], $$_[1], $$_[2]);
sleep($sleep);
}
}
};
# not unlinking test.certout*.pem, test.cacerts.pem, and test.extracerts.pem
}
# The input files for the tests done here dynamically depend on the test server
# selected (where the Mock server used by default is just one possibility).
# On the other hand the main test configuration file test.cnf, which references
# several server-dependent input files by relative file names, is static.
# Moreover the tests use much greater variety of input files than output files.
# Therefore we chose the current directory as a subdirectory of $SRCTOP and it
# was simpler to prepend the output file names by BLDTOP than doing the tests
# from $BLDTOP/test-runs/test_cmp_cli and prepending the input files by SRCTOP.
indir data_dir() => sub {
plan tests => 1 + @server_configurations * @all_aspects
+ (grep(/^Mock$/, @server_configurations)
&& grep(/^certstatus$/, @all_aspects) ? 0 : 1);
test_cmp_cli_aspect("basic", "options", \@cmp_basic_tests);
indir "Mock" => sub {
use_mock_srv_internally();
};
foreach my $server_name (@server_configurations) {
$server_name = chop_dblquot($server_name);
load_config($server_name, $server_name);
SKIP:
{
my $pid;
if ($server_name eq "Mock") {
indir "Mock" => sub {
$pid = start_mock_server("");
skip "Cannot start or find the started CMP mock server",
scalar @all_aspects unless $pid;
}
}
foreach my $aspect (@all_aspects) {
$aspect = chop_dblquot($aspect);
next if $server_name eq "Mock" && $aspect eq "certstatus";
load_config($server_name, $aspect); # update with any aspect-specific settings
indir $server_name => sub {
my $tests = load_tests($server_name, $aspect);
test_cmp_cli_aspect($server_name, $aspect, $tests);
};
};
stop_mock_server($pid) if $pid;
}
};
};
close($faillog) if $faillog;
sub load_tests {
my $server_name = shift;
my $aspect = shift;
my $test_config = $ENV{OPENSSL_CMP_CONFIG} // "$server_name/test.cnf";
my $file = data_file("test_$aspect.csv");
my $result_dir = result_dir();
my @result;
open(my $data, '<', $file) || die "Cannot open $file for reading: $!";
LOOP:
while (my $line = <$data>) {
chomp $line;
$line =~ s{\r\n}{\n}g; # adjust line endings
$line =~ s{_CA_DN}{$ca_dn}g;
$line =~ s{_SERVER_DN}{$server_dn}g;
$line =~ s{_SERVER_HOST}{$server_host}g;
$line =~ s{_SERVER_PORT}{$server_port}g;
$line =~ s{_SERVER_TLS}{$server_tls}g;
$line =~ s{_SERVER_PATH}{$server_path}g;
$line =~ s{_SERVER_CERT}{$server_cert}g;
$line =~ s{_KUR_PORT}{$kur_port}g;
$line =~ s{_PBM_PORT}{$pbm_port}g;
$line =~ s{_PBM_REF}{$pbm_ref}g;
$line =~ s{_PBM_SECRET}{$pbm_secret}g;
$line =~ s{_RESULT_DIR}{$result_dir}g;
next LOOP if $server_tls == 0 && $line =~ m/,\s*-tls_used\s*,/;
my $noproxy = $no_proxy;
if ($line =~ m/,\s*-no_proxy\s*,(.*?)(,|$)/) {
$noproxy = $1;
} elsif ($server_host eq "127.0.0.1") {
# do connections to localhost (e.g., Mock server) without proxy
$line =~ s{-section,,}{-section,,-no_proxy,127.0.0.1,} ;
}
if ($line =~ m/,\s*-proxy\s*,/) {
next LOOP if $no_proxy && ($noproxy =~ $server_host);
} else {
$line =~ s{-section,,}{-section,,-proxy,$proxy,};
}
$line =~ s{-section,,}{-section,,-certout,$result_dir/test.cert.pem,};
$line =~ s{-section,,}{-config,../$test_config,-section,$server_name $aspect,};
my @fields = grep /\S/, split ",", $line;
s/^<EMPTY>$// for (@fields); # used for proxy=""
s/^\s+// for (@fields); # remove leading whitespace from elements
s/\s+$// for (@fields); # remove trailing whitespace from elements
s/^\"(\".*?\")\"$/$1/ for (@fields); # remove escaping from quotation marks from elements
my $expected_exit = $fields[$column];
my $description = 1;
my $title = $fields[$description];
next LOOP if (!defined($expected_exit)
|| ($expected_exit ne 0 && $expected_exit ne 1));
@fields = grep {$_ ne 'BLANK'} @fields[$description + 1 .. @fields - 1];
push @result, [$title, \@fields, $expected_exit];
}
close($data);
return \@result;
}
sub mock_server_pid {
return `lsof -iTCP:$server_port` =~ m/\n\S+\s+(\d+)\s+[^\n]+LISTEN/s ? $1 : 0;
}
sub start_mock_server {
my $args = $_[0]; # optional further CLI arguments
my $dir = bldtop_dir("");
my $cmd = "LD_LIBRARY_PATH=$dir DYLD_LIBRARY_PATH=$dir " .
bldtop_dir($app) . " -config server.cnf $args";
my $pid = mock_server_pid();
return $pid if $pid; # already running
return system("$cmd &") == 0 # start in background, check for success
? (sleep 1, mock_server_pid()) : 0;
}
sub stop_mock_server {
my $pid = $_[0];
system("kill $pid") if $pid;
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或