提交 c2e27310 编写于 作者: V Viktor Dukhovni 提交者: Dr. Stephen Henson

Enable/disable crypto-mdebug just like other features

Also always abort() on leak failure.
Reviewed-by: NStephen Henson <steve@openssl.org>
上级 3af45d99
......@@ -26,7 +26,7 @@
"vos-gcc" => {
cc => "gcc",
cflags => "-Wall -DOPENSSL_SYS_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG",
release_cflags => "-O3",
thread_cflag => "(unknown)",
sys_id => "VOS",
......@@ -132,7 +132,7 @@
# -mcpu=ultrasparc
inherit_from => [ "solaris-sparcv7-gcc", asm("sparcv9_asm") ],
cflags => sub { join(" ","-m32 -mcpu=ultrasparc",@_); },
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -O -g -pedantic -ansi -Wshadow -Wno-long-long -D__EXTENSIONS__",
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -O -g -pedantic -ansi -Wshadow -Wno-long-long -D__EXTENSIONS__",
},
"solaris64-sparcv9-gcc" => {
inherit_from => [ "solaris-sparcv9-gcc" ],
......@@ -150,7 +150,7 @@
inherit_from => [ "solaris-common" ],
cc => "cc",
cflags => sub { join(" ","-xstrconst -Xa -DB_ENDIAN -DBN_DIV2W",@_) },
debug_cflags => "-g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG",
debug_cflags => "-g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG",
release_cflags => "-xO5 -xdepend",
thread_cflag => "-D_REENTRANT",
lflags => sub { join(" ",@_,"-mt -lpthread") },
......@@ -501,7 +501,7 @@
"linux-generic32" => {
cc => "gcc",
cflags => "-Wall",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG",
release_cflags => "-O3",
thread_cflag => "-pthread",
lflags => "-ldl",
......@@ -612,7 +612,7 @@
inherit_from => [ "linux-generic32", asm("x86_elf_asm") ],
cc => "gcc",
cflags => "-march=i486 -DL_ENDIAN -Wall",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG",
release_cflags => "-O3 -fomit-frame-pointer",
debug_lflags => "-lefence",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
......@@ -1450,7 +1450,7 @@
},
"vxworks-ppc750-debug" => {
cc => "ccppc",
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g",
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g",
sys_id => "VXWORKS",
lflags => "-r",
},
......
......@@ -14,14 +14,14 @@
},
"debug" => {
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror",
thread_cflag => "(unknown)",
lflags => "-lefence",
},
"debug-erbridge" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g",
cflags => "$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -m64 -DL_ENDIAN -DTERMIO -g",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
......@@ -36,7 +36,7 @@
"debug-linux-pentium" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -g -mcpu=pentium -Wall",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -mcpu=pentium -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
......@@ -45,7 +45,7 @@
"debug-linux-ppro" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -g -mcpu=pentiumpro -Wall",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -mcpu=pentiumpro -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
......@@ -54,7 +54,7 @@
"debug-linux-elf-noefence" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -g -march=i486 -Wall",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -march=i486 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
......
......@@ -8,17 +8,17 @@
%targets = (
"debug-ben" => {
cc => "gcc",
cflags => "$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DDEBUG_SAFESTACK -O2 -pipe",
cflags => "$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -O2 -pipe",
thread_cflag => "(unknown)",
},
"debug-ben-openbsd" => {
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe",
thread_cflag => "(unknown)",
},
"debug-ben-openbsd-debug" => {
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe",
thread_cflag => "(unknown)",
},
"debug-ben-debug" => {
......@@ -69,12 +69,12 @@
},
"debug-ben-no-opt" => {
cc => "gcc",
cflags => " -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG -Werror -DL_ENDIAN -Wall -g3",
cflags => " -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -Werror -DL_ENDIAN -Wall -g3",
thread_cflag => "(unknown)",
},
"debug-ben-strict" => {
cc => "gcc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe",
thread_cflag => "(unknown)",
},
"debug-ben-darwin64" => {
......
......@@ -10,7 +10,7 @@
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -Wall",
debug_cflags => "-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG-ggdb -g3",
debug_cflags => "-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -ggdb -g3",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT",
......@@ -22,7 +22,7 @@
"debug-levitte-linux-noasm" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -ggdb -g3 -Wall",
cflags => "-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -ggdb -g3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT",
......@@ -34,7 +34,7 @@
"debug-levitte-linux-elf-extreme" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe",
cflags => "-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DENGINE_CONF_DEBUG -DL_ENDIAN -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT",
......@@ -47,7 +47,7 @@
"debug-levitte-linux-noasm-extreme" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe",
cflags => "-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT",
......
......@@ -100,7 +100,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
# Minimum warning options... any contributions to OpenSSL should at least get
# past these.
my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Wtype-limits -Werror -DCRYPTO_MDEBUG -DCRYPTO_MDEBUG_ABORT -DREF_CHECK -DDEBUG_UNUSED";
my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Wtype-limits -Werror -DREF_CHECK -DDEBUG_UNUSED";
# These are used in addition to $gcc_devteam_warn when the compiler is clang.
# TODO(openssl-team): fix problems and investigate if (at least) the
......@@ -908,13 +908,14 @@ my %disabled = ( # "what" => "comment" [or special keyword "experimental
"jpake" => "experimental",
"md2" => "default",
"rc5" => "default",
"sctp" => "default",
"sctp" => "default",
"shared" => "default",
"ssl-trace" => "default",
"store" => "experimental",
"unit-test" => "default",
"zlib" => "default",
"zlib-dynamic" => "default"
"zlib-dynamic" => "default",
"crypto-mdebug" => "default",
);
my @experimental = ();
......
......@@ -46,7 +46,6 @@ OPENSSLDIR=/usr/local/ssl
# LOCK_DEBUG - turns on lots of lock debug output :-)
# REF_CHECK - turn on some xyz_free() assertions.
# REF_PRINT - prints some stuff on structure free.
# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
# MFUNC - Make all Malloc/Free/Realloc calls call
# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
# call application defined callbacks via CRYPTO_set_mem_functions()
......
......@@ -429,7 +429,7 @@ int main(int argc, char *argv[])
BIO_free(bio_in);
BIO_free_all(bio_out);
apps_shutdown();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(bio_err);
#endif
BIO_free(bio_err);
......
......@@ -102,7 +102,7 @@ int asn1_item_embed_new(ASN1_VALUE **pval, const ASN1_ITEM *it, int embed)
else
asn1_cb = 0;
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_push(it->sname ? it->sname : "asn1_item_embed_new");
#endif
......@@ -135,7 +135,7 @@ int asn1_item_embed_new(ASN1_VALUE **pval, const ASN1_ITEM *it, int embed)
if (!i)
goto auxerr;
if (i == 2) {
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return 1;
......@@ -160,7 +160,7 @@ int asn1_item_embed_new(ASN1_VALUE **pval, const ASN1_ITEM *it, int embed)
if (!i)
goto auxerr;
if (i == 2) {
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return 1;
......@@ -184,14 +184,14 @@ int asn1_item_embed_new(ASN1_VALUE **pval, const ASN1_ITEM *it, int embed)
goto auxerr;
break;
}
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return 1;
memerr:
ASN1err(ASN1_F_ASN1_ITEM_EMBED_NEW, ERR_R_MALLOC_FAILURE);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return 0;
......@@ -199,7 +199,7 @@ int asn1_item_embed_new(ASN1_VALUE **pval, const ASN1_ITEM *it, int embed)
auxerr:
ASN1err(ASN1_F_ASN1_ITEM_EMBED_NEW, ASN1_R_AUX_ERROR);
ASN1_item_ex_free(pval, it);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return 0;
......@@ -259,7 +259,7 @@ static int asn1_template_new(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
*pval = NULL;
return 1;
}
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_push(tt->field_name
? tt->field_name : "asn1_template_new");
#endif
......@@ -279,7 +279,7 @@ static int asn1_template_new(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
/* Otherwise pass it back to the item routine */
ret = asn1_item_embed_new(pval, it, embed);
done:
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
OPENSSL_mem_debug_pop();
#endif
return ret;
......
......@@ -74,7 +74,7 @@ static void *(*realloc_wrapper)(void *, size_t, const char *, int)
static void (*free_wrapper)(void *)
= CRYPTO_free;
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
static int call_malloc_debug = 1;
#else
static int call_malloc_debug = 0;
......@@ -125,7 +125,7 @@ void *CRYPTO_malloc(size_t num, const char *file, int line)
return NULL;
allow_customize = 0;
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
if (call_malloc_debug) {
CRYPTO_mem_debug_malloc(NULL, num, 0, file, line);
ret = malloc(num);
......@@ -174,7 +174,7 @@ void *CRYPTO_realloc(void *str, size_t num, const char *file, int line)
}
allow_customize = 0;
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
if (call_malloc_debug) {
void *ret;
CRYPTO_mem_debug_realloc(str, NULL, num, 0, file, line);
......@@ -211,7 +211,7 @@ void *CRYPTO_clear_realloc(void *str, size_t old_len, size_t num,
/* Allocate new memory. Call malloc and do a copy, so that we can
* cleanse the old buffer. */
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
if (call_malloc_debug) {
CRYPTO_mem_debug_realloc(str, NULL, num, 0, file, line);
ret = malloc(num);
......@@ -233,7 +233,7 @@ void *CRYPTO_clear_realloc(void *str, size_t old_len, size_t num,
void CRYPTO_free(void *str)
{
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
if (call_malloc_debug) {
CRYPTO_mem_debug_free(str, 0);
free(str);
......
......@@ -132,7 +132,9 @@
* checking temporarily. State CRYPTO_MEM_CHECK_ENABLE without ..._ON makes
* no sense whatsoever.
*/
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
static int mh_mode = CRYPTO_MEM_CHECK_OFF;
#endif
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
static unsigned long order = 0; /* number of memory requests */
......@@ -203,7 +205,7 @@ static void app_info_free(APP_INFO *inf)
int CRYPTO_mem_ctrl(int mode)
{
#ifndef CRYPTO_MDEBUG
#ifdef OPENSSL_NO_CRYPTO_MDEBUG
return mode - mode;
#else
int ret = mh_mode;
......@@ -663,9 +665,7 @@ void CRYPTO_mem_leaks(BIO *b)
}
if (ml.chunks != 0) {
BIO_printf(b, "%ld bytes leaked in %d chunks\n", ml.bytes, ml.chunks);
# ifdef CRYPTO_MDEBUG_ABORT
abort();
# endif
} else {
/*
* Make sure that, if we found no leaks, memory-leak debugging itself
......
......@@ -56,7 +56,7 @@ CRYPTO_mem_leaks, CRYPTO_mem_leaks_fp - Memory allocation functions
#define CRYPTO_MEM_CHECK_DISABLE
#define CRYPTO_MEM_CHECK_ENABLE
int CRYPTO_mem_ctrl(int flags);
int CRYPTO_mem_ctrl(int mode);
int OPENSSL_mem_debug_push(const char *info)
int OPENSLS_mem_debug_pop)(void)
......@@ -112,12 +112,14 @@ This is most useful for identifying memory leaks.
CRYPTO_set_mem_debug() turns this tracking on and off. It is normally
called at startup, but can be called at any time.
Finer-grain control of the tracking can be done with CRYPTO_mem_ctrl().
The most common case is to enable tracking, which is done by using
the B<CRYPTO_MEM_CHECK_ON> constant; it can be turned off by using
the B<CRYPTO_MEM_CHECK_OFF> value. The disable and enable values are
most commonly used within OpenSSL to termporarily suspend and restore
tracking of library internals.
CRYPTO_mem_ctrl() provides fine-grained control of memory leak tracking.
To enable tracking call CRYPTO_mem_ctrl() with a B<mode> argument of
the B<CRYPTO_MEM_CHECK_ON>.
To disable tracking call CRYPTO_mem_ctrl() with a B<mode> argument of
the B<CRYPTO_MEM_CHECK_OFF>.
The B<CRYPTO_MEM_CHECK_DISABLE> and B<CRYPTO_MEM_CHECK_ENABLE> modes
are used internally within OpenSSL to temporarily suspend and resume
tracking.
While checking memory, it can be useful to store additional context
about what is being done.
......@@ -129,11 +131,9 @@ This must be a global or other static string; it is not copied.
OPENSSL_mem_debug_pop() removes identifying state from the stack.
At the end of the program, calling CRYPTO_mem_leaks() or
CRYPTO_mem_leaks_fp() will
report all "leaked" memory, writing it to the specified BIO B<b>
or FILE B<fp>.
Depending on how OpenSSL is built, it may then abort if there
are any unfree'd allocations, for debugging.
CRYPTO_mem_leaks_fp() will report all "leaked" memory, writing it
to the specified BIO B<b> or FILE B<fp>.
It will then L<abort(3)> if there were any unfree'd allocations.
=head1 RETURN VALUES
......@@ -154,7 +154,7 @@ CRYPTO_set_mem_functions() and CRYPTO_set_mem_debug()
return 1 on success or 0 on failure (almost
always because allocations have already happened).
CRYPTO_mem_ctrl() return the previous value of the flag.
CRYPTO_mem_ctrl() returns the previous value of the mode.
OPENSSL_mem_debug_push() and OPENSSL_mem_debug_pop()
return 1 on success or 0 on failure.
......
......@@ -249,10 +249,10 @@ typedef struct {
* The following can be used to detect memory leaks in the library. If
* used, it turns on malloc checking
*/
# define CRYPTO_MEM_CHECK_OFF 0x0
# define CRYPTO_MEM_CHECK_ON 0x1
# define CRYPTO_MEM_CHECK_ENABLE 0x2
# define CRYPTO_MEM_CHECK_DISABLE 0x3
# define CRYPTO_MEM_CHECK_OFF 0x0 /* Control only */
# define CRYPTO_MEM_CHECK_ON 0x1 /* Control and mode bit */
# define CRYPTO_MEM_CHECK_ENABLE 0x2 /* Control and mode bit */
# define CRYPTO_MEM_CHECK_DISABLE 0x3 /* Control only */
/* predec of the BIO type */
typedef struct bio_st BIO_dummy;
......@@ -291,20 +291,9 @@ DEFINE_STACK_OF(void)
#define OPENSSL_malloc_init() \
CRYPTO_set_mem_functions(CRYPTO_malloc, CRYPTO_realloc, CRYPTO_free)
/*
* Set standard debugging functions (not done by default unless CRYPTO_MDEBUG
* is defined)
*/
# if defined(CRYPTO_MDEBUG_ABORT) && !defined(CRYPTO_MDEBUG)
# define CRYPTO_MDEBUG
# endif
# ifndef CRYPTO_MDEBUG
# define OPENSSL_NO_CRYPTO_MDEBUG
# endif
int CRYPTO_mem_ctrl(int mode);
# ifdef CRYPTO_MDEBUG
# ifndef OPENSSL_NO_CRYPTO_MDEBUG
# define OPENSSL_malloc(num) \
CRYPTO_malloc(num, __FILE__, __LINE__)
# define OPENSSL_zalloc(num) \
......
......@@ -211,7 +211,7 @@ int main(int argc, char *argv[])
ERR_remove_thread_state(NULL);
EVP_cleanup();
CRYPTO_cleanup_all_ex_data();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(err);
#endif
BIO_free(err);
......
......@@ -526,7 +526,7 @@ end:
ERR_free_strings();
ERR_remove_thread_state(NULL);
EVP_cleanup();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(bio_err);
#endif
BIO_free(bio_err);
......
......@@ -215,7 +215,7 @@ int main(int argc, char **argv)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(bio_err);
#endif
BIO_free(bio_err);
......
......@@ -516,7 +516,7 @@ int main(int argc, char *argv[])
BIO_free(out);
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
EXIT(ret);
......
......@@ -545,7 +545,7 @@ int main(void)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(out);
#endif
BIO_free(out);
......
......@@ -1664,7 +1664,7 @@ int main(int argc, char *argv[])
CRYPTO_cleanup_all_ex_data();
ERR_free_strings();
ERR_remove_thread_state(NULL);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
......
......@@ -249,7 +249,7 @@ int main(int argc, char *argv[])
CRYPTO_cleanup_all_ex_data();
ERR_free_strings();
ERR_remove_thread_state(NULL);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
return to_return;
......
......@@ -466,7 +466,7 @@ int main(void)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
......
......@@ -610,7 +610,7 @@ int main(int argc, char **argv)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
if (t.errors)
......
......@@ -300,7 +300,7 @@ int main(int argc, char *argv[])
BN_free(m);
BN_CTX_free(ctx);
ERR_remove_thread_state(NULL);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(out);
#endif
BIO_free(out);
......
......@@ -56,12 +56,23 @@
#include <string.h>
#include <openssl/bio.h>
#include <openssl/crypto.h>
#include <setjmp.h>
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
static sigjmp_buf env;
static void handler(int sig)
{
siglongjmp(env, 1);
}
#endif
int main(int argc, char **argv)
{
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
char *p;
char *lost;
int aborted = 0;
p = getenv("OPENSSL_DEBUG_MEMORY");
if (p != NULL && strcmp(p, "on") == 0)
......@@ -74,15 +85,19 @@ int main(int argc, char **argv)
return 1;
}
if (argv[1] && strcmp(argv[1], "freeit") == 0)
signal(SIGABRT, handler);
if (argv[1] && strcmp(argv[1], "freeit") == 0) {
OPENSSL_free(lost);
lost = NULL;
}
CRYPTO_mem_leaks_fp(stderr);
return 0;
if (sigsetjmp(env, 0) == 0)
CRYPTO_mem_leaks_fp(stderr);
else
aborted = 1;
return ((lost != NULL) ^ (aborted == 1));
#else
if (argv[1] && strcmp(argv[1], "freeit") == 0)
return 0;
fprintf(stderr, "Leak simulated\n");
return 1;
return 0;
#endif
}
......@@ -205,7 +205,7 @@ int main(int argc, char **argv)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
# ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
# endif
return 0;
......
......@@ -3,5 +3,6 @@
use OpenSSL::Test;
setup("test_memleak");
plan tests => 1;
ok(!run(test(["memleaktest"])), "running memleaktest");
plan tests => 2;
ok(run(test(["memleaktest"])), "running leak test");
ok(run(test(["memleaktest", "freeit"])), "running no leak test");
......@@ -327,7 +327,7 @@ int main(int argc, char *argv[])
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
......
......@@ -146,7 +146,7 @@ int main(int argc, char **argv)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(bio_err);
#endif
BIO_free(bio_err);
......
......@@ -1821,7 +1821,7 @@ int main(int argc, char *argv[])
ERR_free_strings();
ERR_remove_thread_state(NULL);
EVP_cleanup();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks(bio_err);
#endif
BIO_free(bio_err);
......
......@@ -207,7 +207,7 @@ int main(int argc, char **argv)
CRYPTO_cleanup_all_ex_data();
ERR_remove_thread_state(NULL);
ERR_free_strings();
#ifdef CRYPTO_MDEBUG
#ifndef OPENSSL_NO_CRYPTO_MDEBUG
CRYPTO_mem_leaks_fp(stderr);
#endif
......
......@@ -124,7 +124,6 @@ foreach (@known_algorithms) {
$disabled_algorithms{$_} = 0;
}
# disabled by default
$disabled_algorithms{"CRYPTO_MDEBUG"} = 1;
$disabled_algorithms{"STATIC_ENGINE"} = 1;
my $options="";
......
......@@ -11,7 +11,7 @@ $rm='/bin/rm -f';
$cc='gcc';
if ($debug)
{ $cflags="-g2 -ggdb -DREF_CHECK -DCRYPTO_MDEBUG"; }
{ $cflags="-g2 -ggdb -DREF_CHECK"; }
elsif ($profile)
{ $cflags="-pg -O3"; }
else
......
......@@ -11,7 +11,7 @@ $rm='/bin/rm -f';
$cc='cc';
if ($debug)
{ $cflags="-g -DREF_CHECK -DCRYPTO_MDEBUG"; }
{ $cflags="-g -DREF_CHECK"; }
else
{ $cflags="-O2"; }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册