Skip to content

O
openssl

btwise / openssl

通知 1
Star 0
Fork 0
O
openssl

体验新版 GitCode，发现更多精彩内容 >>

提交 7f7c318c 编写于 作者: A Andy Polyakov
浏览文件
操作

SHA clean-up and (LP64) tune-up. 

"Clean-up" stands for the fact that it's using common message digest
template ../md32_common.h and sha[1_]dgst.c are reduced down to
'#define SHA_[01]' and then '#include "sha_locl.h"'. It stands "(LP64)"
there because it's 64 bit platforms which benefit most from the tune-up.
The updated code exhibits 40% performance improvement on IRIX64
(sounds too good, huh? I probably should double check if it's not
some cache trashing that was holding it back before), 28% - on
Alpha Linux and 12% - Solaris 7/64.
上级 aef838fc
隐藏空白更改
内联 并排
Showing with 367 addition and 1051 deletion
crypto/sha/sha.h
浏览文件 @ 7f7c318c
......@@ -63,7 +63,7 @@
extern "C" {
#endif
#ifdef NO_SHA
#if defined(NO_SHA) || defined(NO_SHA0) || defined(NO_SHA1)
#error SHA is disabled.
#endif
......@@ -103,14 +103,14 @@ void SHA_Init(SHA_CTX *c);
void SHA_Update(SHA_CTX *c, const unsigned char *data, unsigned long len);
void SHA_Final(unsigned char *md, SHA_CTX *c);
unsigned char *SHA(const unsigned char *d, unsigned long n,unsigned char *md);
void SHA_Transform(SHA_CTX *c, unsigned char *data);
void SHA_Transform(SHA_CTX *c, const unsigned char *data);
#endif
#ifndef NO_SHA1
void SHA1_Init(SHA_CTX *c);
void SHA1_Update(SHA_CTX *c, const unsigned char *data, unsigned long len);
void SHA1_Final(unsigned char *md, SHA_CTX *c);
unsigned char *SHA1(const unsigned char *d, unsigned long n,unsigned char *md);
void SHA1_Transform(SHA_CTX *c, unsigned char *data);
void SHA1_Transform(SHA_CTX *c, const unsigned char *data);
#endif
#ifdef __cplusplus
}
......
crypto/sha/sha1dgst.c
浏览文件 @ 7f7c318c
......@@ -56,443 +56,16 @@
* [including the GNU Public Licence.]
*/
#include <stdio.h>
#include <string.h>
#if !defined(NO_SHA1) && !defined(NO_SHA)
#undef SHA_0
#define SHA_1
#include <openssl/sha.h>
#include "sha_locl.h"
#include <openssl/opensslv.h>
#ifndef NO_SHA1
char *SHA1_version="SHA1" OPENSSL_VERSION_PTEXT;
/* Implemented from SHA-1 document - The Secure Hash Algorithm
*/
#define INIT_DATA_h0 0x67452301UL
#define INIT_DATA_h1 0xefcdab89UL
#define INIT_DATA_h2 0x98badcfeUL
#define INIT_DATA_h3 0x10325476UL
#define INIT_DATA_h4 0xc3d2e1f0UL
#define K_00_19 0x5a827999UL
#define K_20_39 0x6ed9eba1UL
#define K_40_59 0x8f1bbcdcUL
#define K_60_79 0xca62c1d6UL
#ifdef SHA1_ASM
void sha1_block_x86(SHA_CTX *c, register SHA_LONG *p, int num);
# define sha1_block(c,p,n) sha1_block_x86((c),(p),(n)*SHA_CBLOCK)
#else
static void sha1_block(SHA_CTX *c, register SHA_LONG *p, int num);
#endif
#if !defined(B_ENDIAN) && defined(SHA1_ASM)
# define M_c2nl c2l
# define M_p_c2nl p_c2l
# define M_c2nl_p c2l_p
# define M_p_c2nl_p p_c2l_p
# define M_nl2c l2c
#else
# define M_c2nl c2nl
# define M_p_c2nl p_c2nl
# define M_c2nl_p c2nl_p
# define M_p_c2nl_p p_c2nl_p
# define M_nl2c nl2c
#endif
void SHA1_Init(SHA_CTX *c)
{
c->h0=INIT_DATA_h0;
c->h1=INIT_DATA_h1;
c->h2=INIT_DATA_h2;
c->h3=INIT_DATA_h3;
c->h4=INIT_DATA_h4;
c->Nl=0;
c->Nh=0;
c->num=0;
}
void SHA1_Update(SHA_CTX *c, register const unsigned char *data,
unsigned long len)
{
register SHA_LONG *p;
int ew,ec,sw,sc;
SHA_LONG l;
if (len == 0) return;
l=(c->Nl+(len<<3))&0xffffffffL;
if (l < c->Nl) /* overflow */
c->Nh++;
c->Nh+=(len>>29);
c->Nl=l;
if (c->num != 0)
{
p=c->data;
sw=c->num>>2;
sc=c->num&0x03;
if ((c->num+len) >= SHA_CBLOCK)
{
l= p[sw];
M_p_c2nl(data,l,sc);
p[sw++]=l;
for (; sw<SHA_LBLOCK; sw++)
{
M_c2nl(data,l);
p[sw]=l;
}
len-=(SHA_CBLOCK-c->num);
sha1_block(c,p,1);
c->num=0;
/* drop through and do the rest */
}
else
{
c->num+=(int)len;
if ((sc+len) < 4) /* ugly, add char's to a word */
{
l= p[sw];
M_p_c2nl_p(data,l,sc,len);
p[sw]=l;
}
else
{
ew=(c->num>>2);
ec=(c->num&0x03);
l= p[sw];
M_p_c2nl(data,l,sc);
p[sw++]=l;
for (; sw < ew; sw++)
{ M_c2nl(data,l); p[sw]=l; }
if (ec)
{
M_c2nl_p(data,l,ec);
p[sw]=l;
}
}
return;
}
}
/* We can only do the following code for assember, the reason
* being that the sha1_block 'C' version changes the values
* in the 'data' array. The assember code avoids this and
* copies it to a local array. I should be able to do this for
* the C version as well....
*/
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA1_ASM)
if ((((unsigned long)data)%sizeof(SHA_LONG)) == 0)
{
sw=len/SHA_CBLOCK;
if (sw)
{
sha1_block(c,(SHA_LONG *)data,sw);
sw*=SHA_CBLOCK;
data+=sw;
len-=sw;
}
}
#endif
#endif
/* we now can process the input data in blocks of SHA_CBLOCK
* chars and save the leftovers to c->data. */
p=c->data;
while (len >= SHA_CBLOCK)
{
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA1_ASM)
#define SHA_NO_TAIL_CODE
/*
* Basically we get here only when data happens
* to be unaligned.
*/
if (p != (SHA_LONG *)data)
memcpy(p,data,SHA_CBLOCK);
data+=SHA_CBLOCK;
sha1_block(c,p=c->data,1);
len-=SHA_CBLOCK;
#elif defined(L_ENDIAN)
#define BE_COPY(dst,src,i) { \
l = ((SHA_LONG *)src)[i]; \
Endian_Reverse32(l); \
dst[i] = l; \
}
if ((((unsigned long)data)%sizeof(SHA_LONG)) == 0)
{
for (sw=(SHA_LBLOCK/4); sw; sw--)
{
BE_COPY(p,data,0);
BE_COPY(p,data,1);
BE_COPY(p,data,2);
BE_COPY(p,data,3);
p+=4;
data += 4*sizeof(SHA_LONG);
}
sha1_block(c,p=c->data,1);
len-=SHA_CBLOCK;
continue;
}
#endif
#endif
#ifndef SHA_NO_TAIL_CODE
/*
* In addition to "sizeof(SHA_LONG)!= 4" case the
* following code covers unaligned access cases on
* little-endian machines.
* <appro@fy.chalmers.se>
*/
p=c->data;
for (sw=(SHA_LBLOCK/4); sw; sw--)
{
M_c2nl(data,l); p[0]=l;
M_c2nl(data,l); p[1]=l;
M_c2nl(data,l); p[2]=l;
M_c2nl(data,l); p[3]=l;
p+=4;
}
p=c->data;
sha1_block(c,p,1);
len-=SHA_CBLOCK;
#endif
}
ec=(int)len;
c->num=ec;
ew=(ec>>2);
ec&=0x03;
for (sw=0; sw < ew; sw++)
{ M_c2nl(data,l); p[sw]=l; }
M_c2nl_p(data,l,ec);
p[sw]=l;
}
void SHA1_Transform(SHA_CTX *c, unsigned char *b)
{
SHA_LONG p[SHA_LBLOCK];
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA1_ASM)
memcpy(p,b,SHA_CBLOCK);
sha1_block(c,p,1);
return;
#elif defined(L_ENDIAN)
if (((unsigned long)b%sizeof(SHA_LONG)) == 0)
{
SHA_LONG *q;
int i;
q=p;
for (i=(SHA_LBLOCK/4); i; i--)
{
unsigned long l;
BE_COPY(q,b,0); /* BE_COPY was defined above */
BE_COPY(q,b,1);
BE_COPY(q,b,2);
BE_COPY(q,b,3);
q+=4;
b+=4*sizeof(SHA_LONG);
}
sha1_block(c,p,1);
return;
}
#endif
#endif
#ifndef SHA_NO_TAIL_CODE /* defined above, see comment */
{
SHA_LONG *q;
int i;
q=p;
for (i=(SHA_LBLOCK/4); i; i--)
{
SHA_LONG l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
}
sha1_block(c,p,1);
}
#endif
}
#ifndef SHA1_ASM
static void sha1_block(SHA_CTX *c, register SHA_LONG *W, int num)
{
register SHA_LONG A,B,C,D,E,T;
SHA_LONG X[SHA_LBLOCK];
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
for (;;)
{
BODY_00_15( 0,A,B,C,D,E,T,W);
BODY_00_15( 1,T,A,B,C,D,E,W);
BODY_00_15( 2,E,T,A,B,C,D,W);
BODY_00_15( 3,D,E,T,A,B,C,W);
BODY_00_15( 4,C,D,E,T,A,B,W);
BODY_00_15( 5,B,C,D,E,T,A,W);
BODY_00_15( 6,A,B,C,D,E,T,W);
BODY_00_15( 7,T,A,B,C,D,E,W);
BODY_00_15( 8,E,T,A,B,C,D,W);
BODY_00_15( 9,D,E,T,A,B,C,W);
BODY_00_15(10,C,D,E,T,A,B,W);
BODY_00_15(11,B,C,D,E,T,A,W);
BODY_00_15(12,A,B,C,D,E,T,W);
BODY_00_15(13,T,A,B,C,D,E,W);
BODY_00_15(14,E,T,A,B,C,D,W);
BODY_00_15(15,D,E,T,A,B,C,W);
BODY_16_19(16,C,D,E,T,A,B,W,W,W,W);
BODY_16_19(17,B,C,D,E,T,A,W,W,W,W);
BODY_16_19(18,A,B,C,D,E,T,W,W,W,W);
BODY_16_19(19,T,A,B,C,D,E,W,W,W,X);
BODY_20_31(20,E,T,A,B,C,D,W,W,W,X);
BODY_20_31(21,D,E,T,A,B,C,W,W,W,X);
BODY_20_31(22,C,D,E,T,A,B,W,W,W,X);
BODY_20_31(23,B,C,D,E,T,A,W,W,W,X);
BODY_20_31(24,A,B,C,D,E,T,W,W,X,X);
BODY_20_31(25,T,A,B,C,D,E,W,W,X,X);
BODY_20_31(26,E,T,A,B,C,D,W,W,X,X);
BODY_20_31(27,D,E,T,A,B,C,W,W,X,X);
BODY_20_31(28,C,D,E,T,A,B,W,W,X,X);
BODY_20_31(29,B,C,D,E,T,A,W,W,X,X);
BODY_20_31(30,A,B,C,D,E,T,W,X,X,X);
BODY_20_31(31,T,A,B,C,D,E,W,X,X,X);
BODY_32_39(32,E,T,A,B,C,D,X);
BODY_32_39(33,D,E,T,A,B,C,X);
BODY_32_39(34,C,D,E,T,A,B,X);
BODY_32_39(35,B,C,D,E,T,A,X);
BODY_32_39(36,A,B,C,D,E,T,X);
BODY_32_39(37,T,A,B,C,D,E,X);
BODY_32_39(38,E,T,A,B,C,D,X);
BODY_32_39(39,D,E,T,A,B,C,X);
BODY_40_59(40,C,D,E,T,A,B,X);
BODY_40_59(41,B,C,D,E,T,A,X);
BODY_40_59(42,A,B,C,D,E,T,X);
BODY_40_59(43,T,A,B,C,D,E,X);
BODY_40_59(44,E,T,A,B,C,D,X);
BODY_40_59(45,D,E,T,A,B,C,X);
BODY_40_59(46,C,D,E,T,A,B,X);
BODY_40_59(47,B,C,D,E,T,A,X);
BODY_40_59(48,A,B,C,D,E,T,X);
BODY_40_59(49,T,A,B,C,D,E,X);
BODY_40_59(50,E,T,A,B,C,D,X);
BODY_40_59(51,D,E,T,A,B,C,X);
BODY_40_59(52,C,D,E,T,A,B,X);
BODY_40_59(53,B,C,D,E,T,A,X);
BODY_40_59(54,A,B,C,D,E,T,X);
BODY_40_59(55,T,A,B,C,D,E,X);
BODY_40_59(56,E,T,A,B,C,D,X);
BODY_40_59(57,D,E,T,A,B,C,X);
BODY_40_59(58,C,D,E,T,A,B,X);
BODY_40_59(59,B,C,D,E,T,A,X);
BODY_60_79(60,A,B,C,D,E,T,X);
BODY_60_79(61,T,A,B,C,D,E,X);
BODY_60_79(62,E,T,A,B,C,D,X);
BODY_60_79(63,D,E,T,A,B,C,X);
BODY_60_79(64,C,D,E,T,A,B,X);
BODY_60_79(65,B,C,D,E,T,A,X);
BODY_60_79(66,A,B,C,D,E,T,X);
BODY_60_79(67,T,A,B,C,D,E,X);
BODY_60_79(68,E,T,A,B,C,D,X);
BODY_60_79(69,D,E,T,A,B,C,X);
BODY_60_79(70,C,D,E,T,A,B,X);
BODY_60_79(71,B,C,D,E,T,A,X);
BODY_60_79(72,A,B,C,D,E,T,X);
BODY_60_79(73,T,A,B,C,D,E,X);
BODY_60_79(74,E,T,A,B,C,D,X);
BODY_60_79(75,D,E,T,A,B,C,X);
BODY_60_79(76,C,D,E,T,A,B,X);
BODY_60_79(77,B,C,D,E,T,A,X);
BODY_60_79(78,A,B,C,D,E,T,X);
BODY_60_79(79,T,A,B,C,D,E,X);
c->h0=(c->h0+E)&0xffffffffL;
c->h1=(c->h1+T)&0xffffffffL;
c->h2=(c->h2+A)&0xffffffffL;
c->h3=(c->h3+B)&0xffffffffL;
c->h4=(c->h4+C)&0xffffffffL;
if (--num <= 0) break;
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
W+=SHA_LBLOCK; /* Note! This can happen only when sizeof(SHA_LONG)
* is 4. Whenever it's not the actual case this
* function is never called with num larger than 1
* and we never advance down here.
* <appro@fy.chalmers.se>
*/
}
}
#endif
void SHA1_Final(unsigned char *md, SHA_CTX *c)
{
register int i,j;
register SHA_LONG l;
register SHA_LONG *p;
static unsigned char end[4]={0x80,0x00,0x00,0x00};
unsigned char *cp=end;
/* c->num should definitly have room for at least one more byte. */
p=c->data;
j=c->num;
i=j>>2;
#ifdef PURIFY
if ((j&0x03) == 0) p[i]=0;
#endif
l=p[i];
M_p_c2nl(cp,l,j&0x03);
p[i]=l;
i++;
/* i is the next 'undefined word' */
if (c->num >= SHA_LAST_BLOCK)
{
for (; i<SHA_LBLOCK; i++)
p[i]=0;
sha1_block(c,p,1);
i=0;
}
for (; i<(SHA_LBLOCK-2); i++)
p[i]=0;
p[SHA_LBLOCK-2]=c->Nh;
p[SHA_LBLOCK-1]=c->Nl;
#if SHA_LONG_LOG2==2
#if !defined(B_ENDIAN) && defined(SHA1_ASM)
Endian_Reverse32(p[SHA_LBLOCK-2]);
Endian_Reverse32(p[SHA_LBLOCK-1]);
#endif
#endif
sha1_block(c,p,1);
cp=md;
l=c->h0; nl2c(l,cp);
l=c->h1; nl2c(l,cp);
l=c->h2; nl2c(l,cp);
l=c->h3; nl2c(l,cp);
l=c->h4; nl2c(l,cp);
#include "sha_locl.h"
c->num=0;
/* sha_block may be leaving some stuff on the stack
* but I'm not worried :-)
memset((void *)c,0,sizeof(SHA_CTX));
*/
}
#endif
crypto/sha/sha1s.cpp
浏览文件 @ 7f7c318c
......@@ -34,6 +34,7 @@ void GetTSC(unsigned long& tsc)
#include <stdlib.h>
#include <openssl/sha.h>
#define sha1_block_x86 sha1_block_asm_data_order
extern "C" {
void sha1_block_x86(SHA_CTX *ctx, unsigned char *buffer,int num);
}
......@@ -55,8 +56,10 @@ void main(int argc,char *argv[])
if (num == 0) num=16;
if (num > 250) num=16;
numm=num+2;
#if 0
num*=64;
numm*=64;
#endif
for (j=0; j<6; j++)
{
......@@ -72,7 +75,7 @@ void main(int argc,char *argv[])
sha1_block_x86(&ctx,buffer,num);
}
printf("sha1 (%d bytes) %d %d (%.2f)\n",num,
printf("sha1 (%d bytes) %d %d (%.2f)\n",num*64,
e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
}
}
......
crypto/sha/sha_dgst.c
浏览文件 @ 7f7c318c
/* crypto/sha/sha_dgst.c */
/* crypto/sha/sha1dgst.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
......@@ -56,437 +56,16 @@
* [including the GNU Public Licence.]
*/
#include <stdio.h>
#include <string.h>
#define SHA_0
#undef SHA_1
#include <openssl/sha.h>
#include "sha_locl.h"
#include <openssl/opensslv.h>
#ifndef NO_SHA0
char *SHA_version="SHA" OPENSSL_VERSION_PTEXT;
/* Implemented from SHA-0 document - The Secure Hash Algorithm
*/
#define INIT_DATA_h0 0x67452301UL
#define INIT_DATA_h1 0xefcdab89UL
#define INIT_DATA_h2 0x98badcfeUL
#define INIT_DATA_h3 0x10325476UL
#define INIT_DATA_h4 0xc3d2e1f0UL
#define K_00_19 0x5a827999UL
#define K_20_39 0x6ed9eba1UL
#define K_40_59 0x8f1bbcdcUL
#define K_60_79 0xca62c1d6UL
static void sha_block(SHA_CTX *c, register SHA_LONG *p, int num);
#if !defined(B_ENDIAN) && defined(SHA_ASM)
# define M_c2nl c2l
# define M_p_c2nl p_c2l
# define M_c2nl_p c2l_p
# define M_p_c2nl_p p_c2l_p
# define M_nl2c l2c
#else
# define M_c2nl c2nl
# define M_p_c2nl p_c2nl
# define M_c2nl_p c2nl_p
# define M_p_c2nl_p p_c2nl_p
# define M_nl2c nl2c
#endif
void SHA_Init(SHA_CTX *c)
{
c->h0=INIT_DATA_h0;
c->h1=INIT_DATA_h1;
c->h2=INIT_DATA_h2;
c->h3=INIT_DATA_h3;
c->h4=INIT_DATA_h4;
c->Nl=0;
c->Nh=0;
c->num=0;
}
void SHA_Update(SHA_CTX *c, register const unsigned char *data,
unsigned long len)
{
register SHA_LONG *p;
int ew,ec,sw,sc;
SHA_LONG l;
if (len == 0) return;
l=(c->Nl+(len<<3))&0xffffffffL;
if (l < c->Nl) /* overflow */
c->Nh++;
c->Nh+=(len>>29);
c->Nl=l;
if (c->num != 0)
{
p=c->data;
sw=c->num>>2;
sc=c->num&0x03;
if ((c->num+len) >= SHA_CBLOCK)
{
l= p[sw];
M_p_c2nl(data,l,sc);
p[sw++]=l;
for (; sw<SHA_LBLOCK; sw++)
{
M_c2nl(data,l);
p[sw]=l;
}
len-=(SHA_CBLOCK-c->num);
sha_block(c,p,1);
c->num=0;
/* drop through and do the rest */
}
else
{
c->num+=(int)len;
if ((sc+len) < 4) /* ugly, add char's to a word */
{
l= p[sw];
M_p_c2nl_p(data,l,sc,len);
p[sw]=l;
}
else
{
ew=(c->num>>2);
ec=(c->num&0x03);
l= p[sw];
M_p_c2nl(data,l,sc);
p[sw++]=l;
for (; sw < ew; sw++)
{ M_c2nl(data,l); p[sw]=l; }
if (ec)
{
M_c2nl_p(data,l,ec);
p[sw]=l;
}
}
return;
}
}
/* We can only do the following code for assember, the reason
* being that the sha_block 'C' version changes the values
* in the 'data' array. The assember code avoids this and
* copies it to a local array. I should be able to do this for
* the C version as well....
*/
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA_ASM)
if ((((unsigned long)data)%sizeof(SHA_LONG)) == 0)
{
sw=len/SHA_CBLOCK;
if (sw)
{
sha_block(c,(SHA_LONG *)data,sw);
sw*=SHA_CBLOCK;
data+=sw;
len-=sw;
}
}
#endif
#endif
/* we now can process the input data in blocks of SHA_CBLOCK
* chars and save the leftovers to c->data. */
p=c->data;
while (len >= SHA_CBLOCK)
{
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA_ASM)
#define SHA_NO_TAIL_CODE
/*
* Basically we get here only when data happens
* to be unaligned.
*/
if (p != (SHA_LONG *)data)
memcpy(p,data,SHA_CBLOCK);
data+=SHA_CBLOCK;
sha_block(c,p=c->data,1);
len-=SHA_CBLOCK;
#elif defined(L_ENDIAN)
#define BE_COPY(dst,src,i) { \
l = ((SHA_LONG *)src)[i]; \
Endian_Reverse32(l); \
dst[i] = l; \
}
if ((((unsigned long)data)%sizeof(SHA_LONG)) == 0)
{
for (sw=(SHA_LBLOCK/4); sw; sw--)
{
BE_COPY(p,data,0);
BE_COPY(p,data,1);
BE_COPY(p,data,2);
BE_COPY(p,data,3);
p+=4;
data += 4*sizeof(SHA_LONG);
}
sha_block(c,p=c->data,1);
len-=SHA_CBLOCK;
continue;
}
#endif
#endif
#ifndef SHA_NO_TAIL_CODE
/*
* In addition to "sizeof(SHA_LONG)!= 4" case the
* following code covers unaligned access cases on
* little-endian machines.
* <appro@fy.chalmers.se>
*/
p=c->data;
for (sw=(SHA_LBLOCK/4); sw; sw--)
{
M_c2nl(data,l); p[0]=l;
M_c2nl(data,l); p[1]=l;
M_c2nl(data,l); p[2]=l;
M_c2nl(data,l); p[3]=l;
p+=4;
}
p=c->data;
sha_block(c,p,1);
len-=SHA_CBLOCK;
#endif
}
ec=(int)len;
c->num=ec;
ew=(ec>>2);
ec&=0x03;
for (sw=0; sw < ew; sw++)
{ M_c2nl(data,l); p[sw]=l; }
M_c2nl_p(data,l,ec);
p[sw]=l;
}
void SHA_Transform(SHA_CTX *c, unsigned char *b)
{
SHA_LONG p[SHA_LBLOCK];
#if SHA_LONG_LOG2==2
#if defined(B_ENDIAN) || defined(SHA_ASM)
memcpy(p,b,SHA_CBLOCK);
sha_block(c,p,1);
return;
#elif defined(L_ENDIAN)
if (((unsigned long)b%sizeof(SHA_LONG)) == 0)
{
SHA_LONG *q;
int i;
q=p;
for (i=(SHA_LBLOCK/4); i; i--)
{
unsigned long l;
BE_COPY(q,b,0); /* BE_COPY was defined above */
BE_COPY(q,b,1);
BE_COPY(q,b,2);
BE_COPY(q,b,3);
q+=4;
b+=4*sizeof(SHA_LONG);
}
sha_block(c,p,1);
return;
}
#endif
#endif
#ifndef SHA_NO_TAIL_CODE /* defined above, see comment */
{
SHA_LONG *q;
int i;
q=p;
for (i=(SHA_LBLOCK/4); i; i--)
{
SHA_LONG l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
c2nl(b,l); *(q++)=l;
}
sha_block(c,p,1);
}
#endif
}
#ifndef SHA_ASM
static void sha_block(SHA_CTX *c, register SHA_LONG *W, int num)
{
register SHA_LONG A,B,C,D,E,T;
SHA_LONG X[SHA_LBLOCK];
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
#if !defined(NO_SHA0) && !defined(NO_SHA)
for (;;)
{
BODY_00_15( 0,A,B,C,D,E,T,W);
BODY_00_15( 1,T,A,B,C,D,E,W);
BODY_00_15( 2,E,T,A,B,C,D,W);
BODY_00_15( 3,D,E,T,A,B,C,W);
BODY_00_15( 4,C,D,E,T,A,B,W);
BODY_00_15( 5,B,C,D,E,T,A,W);
BODY_00_15( 6,A,B,C,D,E,T,W);
BODY_00_15( 7,T,A,B,C,D,E,W);
BODY_00_15( 8,E,T,A,B,C,D,W);
BODY_00_15( 9,D,E,T,A,B,C,W);
BODY_00_15(10,C,D,E,T,A,B,W);
BODY_00_15(11,B,C,D,E,T,A,W);
BODY_00_15(12,A,B,C,D,E,T,W);
BODY_00_15(13,T,A,B,C,D,E,W);
BODY_00_15(14,E,T,A,B,C,D,W);
BODY_00_15(15,D,E,T,A,B,C,W);
BODY_16_19(16,C,D,E,T,A,B,W,W,W,W);
BODY_16_19(17,B,C,D,E,T,A,W,W,W,W);
BODY_16_19(18,A,B,C,D,E,T,W,W,W,W);
BODY_16_19(19,T,A,B,C,D,E,W,W,W,X);
#undef SHA_1
#define SHA_0
BODY_20_31(20,E,T,A,B,C,D,W,W,W,X);
BODY_20_31(21,D,E,T,A,B,C,W,W,W,X);
BODY_20_31(22,C,D,E,T,A,B,W,W,W,X);
BODY_20_31(23,B,C,D,E,T,A,W,W,W,X);
BODY_20_31(24,A,B,C,D,E,T,W,W,X,X);
BODY_20_31(25,T,A,B,C,D,E,W,W,X,X);
BODY_20_31(26,E,T,A,B,C,D,W,W,X,X);
BODY_20_31(27,D,E,T,A,B,C,W,W,X,X);
BODY_20_31(28,C,D,E,T,A,B,W,W,X,X);
BODY_20_31(29,B,C,D,E,T,A,W,W,X,X);
BODY_20_31(30,A,B,C,D,E,T,W,X,X,X);
BODY_20_31(31,T,A,B,C,D,E,W,X,X,X);
BODY_32_39(32,E,T,A,B,C,D,X);
BODY_32_39(33,D,E,T,A,B,C,X);
BODY_32_39(34,C,D,E,T,A,B,X);
BODY_32_39(35,B,C,D,E,T,A,X);
BODY_32_39(36,A,B,C,D,E,T,X);
BODY_32_39(37,T,A,B,C,D,E,X);
BODY_32_39(38,E,T,A,B,C,D,X);
BODY_32_39(39,D,E,T,A,B,C,X);
BODY_40_59(40,C,D,E,T,A,B,X);
BODY_40_59(41,B,C,D,E,T,A,X);
BODY_40_59(42,A,B,C,D,E,T,X);
BODY_40_59(43,T,A,B,C,D,E,X);
BODY_40_59(44,E,T,A,B,C,D,X);
BODY_40_59(45,D,E,T,A,B,C,X);
BODY_40_59(46,C,D,E,T,A,B,X);
BODY_40_59(47,B,C,D,E,T,A,X);
BODY_40_59(48,A,B,C,D,E,T,X);
BODY_40_59(49,T,A,B,C,D,E,X);
BODY_40_59(50,E,T,A,B,C,D,X);
BODY_40_59(51,D,E,T,A,B,C,X);
BODY_40_59(52,C,D,E,T,A,B,X);
BODY_40_59(53,B,C,D,E,T,A,X);
BODY_40_59(54,A,B,C,D,E,T,X);
BODY_40_59(55,T,A,B,C,D,E,X);
BODY_40_59(56,E,T,A,B,C,D,X);
BODY_40_59(57,D,E,T,A,B,C,X);
BODY_40_59(58,C,D,E,T,A,B,X);
BODY_40_59(59,B,C,D,E,T,A,X);
BODY_60_79(60,A,B,C,D,E,T,X);
BODY_60_79(61,T,A,B,C,D,E,X);
BODY_60_79(62,E,T,A,B,C,D,X);
BODY_60_79(63,D,E,T,A,B,C,X);
BODY_60_79(64,C,D,E,T,A,B,X);
BODY_60_79(65,B,C,D,E,T,A,X);
BODY_60_79(66,A,B,C,D,E,T,X);
BODY_60_79(67,T,A,B,C,D,E,X);
BODY_60_79(68,E,T,A,B,C,D,X);
BODY_60_79(69,D,E,T,A,B,C,X);
BODY_60_79(70,C,D,E,T,A,B,X);
BODY_60_79(71,B,C,D,E,T,A,X);
BODY_60_79(72,A,B,C,D,E,T,X);
BODY_60_79(73,T,A,B,C,D,E,X);
BODY_60_79(74,E,T,A,B,C,D,X);
BODY_60_79(75,D,E,T,A,B,C,X);
BODY_60_79(76,C,D,E,T,A,B,X);
BODY_60_79(77,B,C,D,E,T,A,X);
BODY_60_79(78,A,B,C,D,E,T,X);
BODY_60_79(79,T,A,B,C,D,E,X);
c->h0=(c->h0+E)&0xffffffffL;
c->h1=(c->h1+T)&0xffffffffL;
c->h2=(c->h2+A)&0xffffffffL;
c->h3=(c->h3+B)&0xffffffffL;
c->h4=(c->h4+C)&0xffffffffL;
if (--num <= 0) break;
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
#include <openssl/opensslv.h>
W+=SHA_LBLOCK; /* Note! This can happen only when sizeof(SHA_LONG)
* is 4. Whenever it's not the actual case this
* function is never called with num larger than 1
* and we never advance down here.
* <appro@fy.chalmers.se>
*/
}
}
#endif
char *SHA_version="SHA" OPENSSL_VERSION_PTEXT;
void SHA_Final(unsigned char *md, SHA_CTX *c)
{
register int i,j;
register SHA_LONG l;
register SHA_LONG *p;
static unsigned char end[4]={0x80,0x00,0x00,0x00};
unsigned char *cp=end;
#include "sha_locl.h"
/* c->num should definitly have room for at least one more byte. */
p=c->data;
j=c->num;
i=j>>2;
#ifdef PURIFY
if ((j&0x03) == 0) p[i]=0;
#endif
l=p[i];
M_p_c2nl(cp,l,j&0x03);
p[i]=l;
i++;
/* i is the next 'undefined word' */
if (c->num >= SHA_LAST_BLOCK)
{
for (; i<SHA_LBLOCK; i++)
p[i]=0;
sha_block(c,p,1);
i=0;
}
for (; i<(SHA_LBLOCK-2); i++)
p[i]=0;
p[SHA_LBLOCK-2]=c->Nh;
p[SHA_LBLOCK-1]=c->Nl;
#if SHA_LONG_LOG2==2
#if !defined(B_ENDIAN) && defined(SHA_ASM)
Endian_Reverse32(p[SHA_LBLOCK-2]);
Endian_Reverse32(p[SHA_LBLOCK-1]);
#endif
#endif
sha_block(c,p,1);
cp=md;
l=c->h0; nl2c(l,cp);
l=c->h1; nl2c(l,cp);
l=c->h2; nl2c(l,cp);
l=c->h3; nl2c(l,cp);
l=c->h4; nl2c(l,cp);
c->num=0;
/* sha_block may be leaving some stuff on the stack
* but I'm not worried :-)
memset((void *)c,0,sizeof(SHA_CTX));
*/
}
#endif
crypto/sha/sha_locl.h
浏览文件 @ 7f7c318c
......@@ -60,180 +60,98 @@
#include <string.h>
#include <openssl/opensslconf.h>
#ifdef undef
/* one or the other needs to be defined */
#ifndef SHA_1 /* FIPE 180-1 */
#define SHA_0 /* FIPS 180 */
#endif
#endif
#undef c2nl
#define c2nl(c,l) (l =(((unsigned long)(*((c)++)))<<24), \
l|=(((unsigned long)(*((c)++)))<<16), \
l|=(((unsigned long)(*((c)++)))<< 8), \
l|=(((unsigned long)(*((c)++))) ))
#undef p_c2nl
#define p_c2nl(c,l,n) { \
switch (n) { \
case 0: l =((unsigned long)(*((c)++)))<<24; \
case 1: l|=((unsigned long)(*((c)++)))<<16; \
case 2: l|=((unsigned long)(*((c)++)))<< 8; \
case 3: l|=((unsigned long)(*((c)++))); \
} \
}
#undef c2nl_p
/* NOTE the pointer is not incremented at the end of this */
#define c2nl_p(c,l,n) { \
l=0; \
(c)+=n; \
switch (n) { \
case 3: l =((unsigned long)(*(--(c))))<< 8; \
case 2: l|=((unsigned long)(*(--(c))))<<16; \
case 1: l|=((unsigned long)(*(--(c))))<<24; \
} \
}
#undef p_c2nl_p
#define p_c2nl_p(c,l,sc,len) { \
switch (sc) \
{ \
case 0: l =((unsigned long)(*((c)++)))<<24; \
if (--len == 0) break; \
case 1: l|=((unsigned long)(*((c)++)))<<16; \
if (--len == 0) break; \
case 2: l|=((unsigned long)(*((c)++)))<< 8; \
} \
}
#undef nl2c
#define nl2c(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \
*((c)++)=(unsigned char)(((l)>>16)&0xff), \
*((c)++)=(unsigned char)(((l)>> 8)&0xff), \
*((c)++)=(unsigned char)(((l) )&0xff))
#undef c2l
#define c2l(c,l) (l =(((unsigned long)(*((c)++))) ), \
l|=(((unsigned long)(*((c)++)))<< 8), \
l|=(((unsigned long)(*((c)++)))<<16), \
l|=(((unsigned long)(*((c)++)))<<24))
#undef p_c2l
#define p_c2l(c,l,n) { \
switch (n) { \
case 0: l =((unsigned long)(*((c)++))); \
case 1: l|=((unsigned long)(*((c)++)))<< 8; \
case 2: l|=((unsigned long)(*((c)++)))<<16; \
case 3: l|=((unsigned long)(*((c)++)))<<24; \
} \
}
#undef c2l_p
/* NOTE the pointer is not incremented at the end of this */
#define c2l_p(c,l,n) { \
l=0; \
(c)+=n; \
switch (n) { \
case 3: l =((unsigned long)(*(--(c))))<<16; \
case 2: l|=((unsigned long)(*(--(c))))<< 8; \
case 1: l|=((unsigned long)(*(--(c)))); \
} \
}
#undef p_c2l_p
#define p_c2l_p(c,l,sc,len) { \
switch (sc) \
{ \
case 0: l =((unsigned long)(*((c)++))); \
if (--len == 0) break; \
case 1: l|=((unsigned long)(*((c)++)))<< 8; \
if (--len == 0) break; \
case 2: l|=((unsigned long)(*((c)++)))<<16; \
} \
}
#undef l2c
#define l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \
*((c)++)=(unsigned char)(((l)>> 8)&0xff), \
*((c)++)=(unsigned char)(((l)>>16)&0xff), \
*((c)++)=(unsigned char)(((l)>>24)&0xff))
#include <openssl/sha.h>
#ifndef SHA_LONG_LOG2
#define SHA_LONG_LOG2 2 /* default to 32 bits */
#endif
#undef ROTATE
#undef Endian_Reverse32
#if defined(WIN32)
#define ROTATE(a,n) _lrotl(a,n)
#elif defined(__GNUC__) && !defined(PEDANTIC)
/* some inline assembler templates by <appro@fy.chalmers.se> */
#if defined(__i386) && !defined(NO_ASM)
#define ROTATE(a,n) ({ register unsigned int ret; \
asm ("roll %1,%0" \
: "=r"(ret) \
: "I"(n), "0"(a) \
: "cc"); \
ret; \
})
#ifndef I386_ONLY
#define Endian_Reverse32(a) \
{ register unsigned int ltmp=(a); \
asm ("bswapl %0" \
: "=r"(ltmp) : "0"(ltmp)); \
(a)=ltmp; \
}
#endif
#elif defined(__powerpc)
#define ROTATE(a,n) ({ register unsigned int ret; \
asm ("rlwinm %0,%1,%2,0,31" \
: "=r"(ret) \
: "r"(a), "I"(n)); \
ret; \
})
/* Endian_Reverse32 is not needed for PowerPC */
#endif
#endif
#define DATA_ORDER_IS_BIG_ENDIAN
#define HASH_LONG SHA_LONG
#define HASH_LONG_LOG2 SHA_LONG_LOG2
#define HASH_CTX SHA_CTX
#define HASH_CBLOCK SHA_CBLOCK
#define HASH_LBLOCK SHA_LBLOCK
#define HASH_MAKE_STRING(c,s) do { \
unsigned long l; \
l=(c)->h0; HOST_l2c(l,(s)); \
l=(c)->h1; HOST_l2c(l,(s)); \
l=(c)->h2; HOST_l2c(l,(s)); \
l=(c)->h3; HOST_l2c(l,(s)); \
l=(c)->h4; HOST_l2c(l,(s)); \
} while (0)
#if defined(SHA_0)
# define HASH_UPDATE SHA_Update
# define HASH_TRANSFORM SHA_Transform
# define HASH_FINAL SHA_Final
# define HASH_INIT SHA_Init
# define HASH_BLOCK_HOST_ORDER sha_block_host_order
# define HASH_BLOCK_DATA_ORDER sha_block_data_order
# define Xupdate(a,ix,ia,ib,ic,id) (ix=(a)=(ia^ib^ic^id))
void sha_block_host_order (SHA_CTX *c, const void *p,int num);
void sha_block_data_order (SHA_CTX *c, const void *p,int num);
#elif defined(SHA_1)
# define HASH_UPDATE SHA1_Update
# define HASH_TRANSFORM SHA1_Transform
# define HASH_FINAL SHA1_Final
# define HASH_INIT SHA1_Init
# define HASH_BLOCK_HOST_ORDER sha1_block_host_order
# define HASH_BLOCK_DATA_ORDER sha1_block_data_order
# define Xupdate(a,ix,ia,ib,ic,id) ( (a)=(ia^ib^ic^id), \
ix=(a)=ROTATE((a),1) \
)
# ifdef SHA1_ASM
# if defined(__i386) || defined(_M_IX86) || defined(__INTEL__)
# define sha1_block_host_order sha1_block_asm_host_order
# define DONT_IMPLEMENT_BLOCK_HOST_ORDER
# define sha1_block_data_order sha1_block_asm_data_order
# define DONT_IMPLEMENT_BLOCK_DATA_ORDER
# define HASH_BLOCK_DATA_ORDER_ALIGNED sha1_block_asm_data_order
# endif
# endif
void sha1_block_host_order (SHA_CTX *c, const void *p,int num);
void sha1_block_data_order (SHA_CTX *c, const void *p,int num);
/* A nice byte order reversal from Wei Dai <weidai@eskimo.com> */
#ifdef ROTATE
#ifndef Endian_Reverse32
/* 5 instructions with rotate instruction, else 9 */
#define Endian_Reverse32(a) \
{ \
unsigned long t=(a); \
(a)=((ROTATE(t,8)&0x00FF00FF)|(ROTATE((t&0x00FF00FF),24))); \
}
#endif
#else
#define ROTATE(a,n) (((a)<<(n))|(((a)&0xffffffff)>>(32-(n))))
#ifndef Endian_Reverse32
/* 6 instructions with rotate instruction, else 8 */
#define Endian_Reverse32(a) \
{ \
unsigned long t=(a); \
t=(((t>>8)&0x00FF00FF)|((t&0x00FF00FF)<<8)); \
(a)=ROTATE(t,16); \
}
# error "Either SHA_0 or SHA_1 must be defined."
#endif
/*
* Originally the middle line started with l=(((l&0xFF00FF00)>>8)|...
* It's rewritten as above for two reasons:
* - RISCs aren't good at long constants and have to explicitely
* compose 'em with several (well, usually 2) instructions in a
* register before performing the actual operation and (as you
* already realized:-) having same constant should inspire the
* compiler to permanently allocate the only register for it;
* - most modern CPUs have two ALUs, but usually only one has
* circuitry for shifts:-( this minor tweak inspires compiler
* to schedule shift instructions in a better way...
*
* <appro@fy.chalmers.se>
*/
#ifndef FLAT_INC
#include "../md32_common.h"
#else
#include "md32_common.h"
#endif
#define INIT_DATA_h0 0x67452301UL
#define INIT_DATA_h1 0xefcdab89UL
#define INIT_DATA_h2 0x98badcfeUL
#define INIT_DATA_h3 0x10325476UL
#define INIT_DATA_h4 0xc3d2e1f0UL
void HASH_INIT (SHA_CTX *c)
{
c->h0=INIT_DATA_h0;
c->h1=INIT_DATA_h1;
c->h2=INIT_DATA_h2;
c->h3=INIT_DATA_h3;
c->h4=INIT_DATA_h4;
c->Nl=0;
c->Nh=0;
c->num=0;
}
#define K_00_19 0x5a827999UL
#define K_20_39 0x6ed9eba1UL
#define K_40_59 0x8f1bbcdcUL
#define K_60_79 0xca62c1d6UL
/* As pointed out by Wei Dai <weidai@eskimo.com>, F() below can be
* simplified to the code in F_00_19. Wei attributes these optimisations
* to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel.
......@@ -246,43 +164,286 @@
#define F_40_59(b,c,d) (((b) & (c)) | (((b)|(c)) & (d)))
#define F_60_79(b,c,d) F_20_39(b,c,d)
#undef Xupdate
#ifdef SHA_0
#define Xupdate(a,i,ia,ib,ic,id) X[(i)&0x0f]=(a)=\
(ia[(i)&0x0f]^ib[((i)+2)&0x0f]^ic[((i)+8)&0x0f]^id[((i)+13)&0x0f]);
#endif
#ifdef SHA_1
#define Xupdate(a,i,ia,ib,ic,id) (a)=\
(ia[(i)&0x0f]^ib[((i)+2)&0x0f]^ic[((i)+8)&0x0f]^id[((i)+13)&0x0f]);\
X[(i)&0x0f]=(a)=ROTATE((a),1);
#endif
#define BODY_00_15(i,a,b,c,d,e,f,xa) \
(f)=xa[i]+(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \
#define BODY_00_15(i,a,b,c,d,e,f,xi) \
(f)=xi+(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \
(b)=ROTATE((b),30);
#define BODY_16_19(i,a,b,c,d,e,f,xa,xb,xc,xd) \
Xupdate(f,i,xa,xb,xc,xd); \
#define BODY_16_19(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \
Xupdate(f,xi,xa,xb,xc,xd); \
(f)+=(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \
(b)=ROTATE((b),30);
#define BODY_20_31(i,a,b,c,d,e,f,xa,xb,xc,xd) \
Xupdate(f,i,xa,xb,xc,xd); \
#define BODY_20_31(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \
Xupdate(f,xi,xa,xb,xc,xd); \
(f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \
(b)=ROTATE((b),30);
#define BODY_32_39(i,a,b,c,d,e,f,xa) \
Xupdate(f,i,xa,xa,xa,xa); \
#define BODY_32_39(i,a,b,c,d,e,f,xa,xb,xc,xd) \
Xupdate(f,xa,xa,xb,xc,xd); \
(f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \
(b)=ROTATE((b),30);
#define BODY_40_59(i,a,b,c,d,e,f,xa) \
Xupdate(f,i,xa,xa,xa,xa); \
#define BODY_40_59(i,a,b,c,d,e,f,xa,xb,xc,xd) \
Xupdate(f,xa,xa,xb,xc,xd); \
(f)+=(e)+K_40_59+ROTATE((a),5)+F_40_59((b),(c),(d)); \
(b)=ROTATE((b),30);
#define BODY_60_79(i,a,b,c,d,e,f,xa) \
Xupdate(f,i,xa,xa,xa,xa); \
(f)=X[(i)&0x0f]+(e)+K_60_79+ROTATE((a),5)+F_60_79((b),(c),(d)); \
#define BODY_60_79(i,a,b,c,d,e,f,xa,xb,xc,xd) \
Xupdate(f,xa,xa,xb,xc,xd); \
(f)=xa+(e)+K_60_79+ROTATE((a),5)+F_60_79((b),(c),(d)); \
(b)=ROTATE((b),30);
#ifndef DONT_IMPLEMENT_BLOCK_HOST_ORDER
void HASH_BLOCK_HOST_ORDER (SHA_CTX *c, const void *d, int num)
{
const SHA_LONG *W=d;
register unsigned long A,B,C,D,E,T;
#ifdef SHA_XARRAY
SHA_LONG X[16];
# define X(i) X[(i)]
#else
unsigned long X0, X1, X2, X3, X4, X5, X6, X7,
X8, X9,X10,X11,X12,X13,X14,X15;
# define X(i) X##i
#endif
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
for (;;)
{
BODY_00_15( 0,A,B,C,D,E,T,W[ 0]);
BODY_00_15( 1,T,A,B,C,D,E,W[ 1]);
BODY_00_15( 2,E,T,A,B,C,D,W[ 2]);
BODY_00_15( 3,D,E,T,A,B,C,W[ 3]);
BODY_00_15( 4,C,D,E,T,A,B,W[ 4]);
BODY_00_15( 5,B,C,D,E,T,A,W[ 5]);
BODY_00_15( 6,A,B,C,D,E,T,W[ 6]);
BODY_00_15( 7,T,A,B,C,D,E,W[ 7]);
BODY_00_15( 8,E,T,A,B,C,D,W[ 8]);
BODY_00_15( 9,D,E,T,A,B,C,W[ 9]);
BODY_00_15(10,C,D,E,T,A,B,W[10]);
BODY_00_15(11,B,C,D,E,T,A,W[11]);
BODY_00_15(12,A,B,C,D,E,T,W[12]);
BODY_00_15(13,T,A,B,C,D,E,W[13]);
BODY_00_15(14,E,T,A,B,C,D,W[14]);
BODY_00_15(15,D,E,T,A,B,C,W[15]);
BODY_16_19(16,C,D,E,T,A,B,X( 0),W[ 0],W[ 2],W[ 8],W[13]);
BODY_16_19(17,B,C,D,E,T,A,X( 1),W[ 1],W[ 3],W[ 9],W[14]);
BODY_16_19(18,A,B,C,D,E,T,X( 2),W[ 2],W[ 4],W[10],W[15]);
BODY_16_19(19,T,A,B,C,D,E,X( 3),W[ 3],W[ 5],W[11],X( 0));
BODY_20_31(20,E,T,A,B,C,D,X( 4),W[ 4],W[ 6],W[12],X( 1));
BODY_20_31(21,D,E,T,A,B,C,X( 5),W[ 5],W[ 7],W[13],X( 2));
BODY_20_31(22,C,D,E,T,A,B,X( 6),W[ 6],W[ 8],W[14],X( 3));
BODY_20_31(23,B,C,D,E,T,A,X( 7),W[ 7],W[ 9],W[15],X( 4));
BODY_20_31(24,A,B,C,D,E,T,X( 8),W[ 8],W[10],X( 0),X( 5));
BODY_20_31(25,T,A,B,C,D,E,X( 9),W[ 9],W[11],X( 1),X( 6));
BODY_20_31(26,E,T,A,B,C,D,X(10),W[10],W[12],X( 2),X( 7));
BODY_20_31(27,D,E,T,A,B,C,X(11),W[11],W[13],X( 3),X( 8));
BODY_20_31(28,C,D,E,T,A,B,X(12),W[12],W[14],X( 4),X( 9));
BODY_20_31(29,B,C,D,E,T,A,X(13),W[13],W[15],X( 5),X(10));
BODY_20_31(30,A,B,C,D,E,T,X(14),W[14],X( 0),X( 6),X(11));
BODY_20_31(31,T,A,B,C,D,E,X(15),W[15],X( 1),X( 7),X(12));
BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13));
BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14));
BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15));
BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0));
BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1));
BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2));
BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3));
BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4));
BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5));
BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6));
BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7));
BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8));
BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9));
BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10));
BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11));
BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12));
BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13));
BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14));
BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15));
BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0));
BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1));
BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2));
BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3));
BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4));
BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5));
BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6));
BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7));
BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8));
BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9));
BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10));
BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11));
BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12));
BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13));
BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14));
BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15));
BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0));
BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1));
BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2));
BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3));
BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4));
BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5));
BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6));
BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7));
BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8));
BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9));
BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10));
BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11));
BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12));
c->h0=(c->h0+E)&0xffffffffL;
c->h1=(c->h1+T)&0xffffffffL;
c->h2=(c->h2+A)&0xffffffffL;
c->h3=(c->h3+B)&0xffffffffL;
c->h4=(c->h4+C)&0xffffffffL;
if (--num <= 0) break;
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
W+=SHA_LBLOCK;
}
}
#endif
#ifndef DONT_IMPLEMENT_BLOCK_DATA_ORDER
void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, int num)
{
const unsigned char *data=p;
register unsigned long A,B,C,D,E,T,l;
#ifdef SHA_XARRAY
SHA_LONG X[16];
# define X(i) X[(i)]
#else
unsigned long X0, X1, X2, X3, X4, X5, X6, X7,
X8, X9,X10,X11,X12,X13,X14,X15;
# define X(i) X##i
#endif
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
for (;;)
{
HOST_c2l(data,l); X( 0)=l; HOST_c2l(data,l); X( 1)=l;
BODY_00_15( 0,A,B,C,D,E,T,X( 0)); HOST_c2l(data,l); X( 2)=l;
BODY_00_15( 1,T,A,B,C,D,E,X( 1)); HOST_c2l(data,l); X( 3)=l;
BODY_00_15( 2,E,T,A,B,C,D,X( 2)); HOST_c2l(data,l); X( 4)=l;
BODY_00_15( 3,D,E,T,A,B,C,X( 3)); HOST_c2l(data,l); X( 5)=l;
BODY_00_15( 4,C,D,E,T,A,B,X( 4)); HOST_c2l(data,l); X( 6)=l;
BODY_00_15( 5,B,C,D,E,T,A,X( 5)); HOST_c2l(data,l); X( 7)=l;
BODY_00_15( 6,A,B,C,D,E,T,X( 6)); HOST_c2l(data,l); X( 8)=l;
BODY_00_15( 7,T,A,B,C,D,E,X( 7)); HOST_c2l(data,l); X( 9)=l;
BODY_00_15( 8,E,T,A,B,C,D,X( 8)); HOST_c2l(data,l); X(10)=l;
BODY_00_15( 9,D,E,T,A,B,C,X( 9)); HOST_c2l(data,l); X(11)=l;
BODY_00_15(10,C,D,E,T,A,B,X(10)); HOST_c2l(data,l); X(12)=l;
BODY_00_15(11,B,C,D,E,T,A,X(11)); HOST_c2l(data,l); X(13)=l;
BODY_00_15(12,A,B,C,D,E,T,X(12)); HOST_c2l(data,l); X(14)=l;
BODY_00_15(13,T,A,B,C,D,E,X(13)); HOST_c2l(data,l); X(15)=l;
BODY_00_15(14,E,T,A,B,C,D,X(14));
BODY_00_15(15,D,E,T,A,B,C,X(15));
BODY_16_19(16,C,D,E,T,A,B,X( 0),X( 0),X( 2),X( 8),X(13));
BODY_16_19(17,B,C,D,E,T,A,X( 1),X( 1),X( 3),X( 9),X(14));
BODY_16_19(18,A,B,C,D,E,T,X( 2),X( 2),X( 4),X(10),X(15));
BODY_16_19(19,T,A,B,C,D,E,X( 3),X( 3),X( 5),X(11),X( 0));
BODY_20_31(20,E,T,A,B,C,D,X( 4),X( 4),X( 6),X(12),X( 1));
BODY_20_31(21,D,E,T,A,B,C,X( 5),X( 5),X( 7),X(13),X( 2));
BODY_20_31(22,C,D,E,T,A,B,X( 6),X( 6),X( 8),X(14),X( 3));
BODY_20_31(23,B,C,D,E,T,A,X( 7),X( 7),X( 9),X(15),X( 4));
BODY_20_31(24,A,B,C,D,E,T,X( 8),X( 8),X(10),X( 0),X( 5));
BODY_20_31(25,T,A,B,C,D,E,X( 9),X( 9),X(11),X( 1),X( 6));
BODY_20_31(26,E,T,A,B,C,D,X(10),X(10),X(12),X( 2),X( 7));
BODY_20_31(27,D,E,T,A,B,C,X(11),X(11),X(13),X( 3),X( 8));
BODY_20_31(28,C,D,E,T,A,B,X(12),X(12),X(14),X( 4),X( 9));
BODY_20_31(29,B,C,D,E,T,A,X(13),X(13),X(15),X( 5),X(10));
BODY_20_31(30,A,B,C,D,E,T,X(14),X(14),X( 0),X( 6),X(11));
BODY_20_31(31,T,A,B,C,D,E,X(15),X(15),X( 1),X( 7),X(12));
BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13));
BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14));
BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15));
BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0));
BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1));
BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2));
BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3));
BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4));
BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5));
BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6));
BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7));
BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8));
BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9));
BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10));
BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11));
BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12));
BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13));
BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14));
BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15));
BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0));
BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1));
BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2));
BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3));
BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4));
BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5));
BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6));
BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7));
BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8));
BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9));
BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10));
BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11));
BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12));
BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13));
BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14));
BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15));
BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0));
BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1));
BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2));
BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3));
BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4));
BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5));
BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6));
BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7));
BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8));
BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9));
BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10));
BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11));
BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12));
c->h0=(c->h0+E)&0xffffffffL;
c->h1=(c->h1+T)&0xffffffffL;
c->h2=(c->h2+A)&0xffffffffL;
c->h3=(c->h3+B)&0xffffffffL;
c->h4=(c->h4+C)&0xffffffffL;
if (--num <= 0) break;
A=c->h0;
B=c->h1;
C=c->h2;
D=c->h3;
E=c->h4;
}
}
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或