%DIF DEL PreviousConfiguration.tex Mon May 2 10:50:22 2022
%DIF ADD ../Configuration.tex Mon May 16 22:12:21 2022
%DIF ADD ../Configuration.tex Mon May 23 10:06:49 2022
\usepackage{lmodern}
\usepackage{amssymb,amsmath}
...
...
@@ -3653,16 +3653,23 @@ the default boot entry choice will remain changed until the next manual reconfig
the OpenCore picker startup and \texttt{action hotkeys}.
Introducing a delay may give extra time to hold the right \texttt{action hotkey}
sequence to, for instance, boot into recovery mode. On some platforms, setting this
option to a minimum of \texttt{5000-10000} microseconds may be required to access
\texttt{action hotkeys} due to the nature of the keyboard driver. \DIFaddbegin\DIFadd{If the boot chime
is configured (see audio configuration options) then, at the expense of slightly slower
startup, an even longer delay up to more or less the length of the boot chime sound
causes behaviour similar to a real Mac, where the chime itself acts as a reliable signal
for when hotkeys can be pressed.
}\DIFaddend
sequence to, for instance, boot into recovery mode. On \DIFaddbegin\DIFadd{most systems, the appearance
of the initial boot logo is a good indication of the time from which hotkeys can be
held down. Earlier than this, the key press may not be registered. On }\DIFaddend some platforms,
setting this option to a minimum of \texttt{5000-10000} microseconds \DIFdelbegin\DIFdel{may be }\DIFdelend\DIFaddbegin\DIFadd{is also }\DIFaddend required
to access \texttt{action hotkeys} due to the nature of the keyboard driver.
\DIFaddbegin\DIFadd{If the boot chime is configured (see audio configuration options) then at the expense
of slower startup, an even longer delay of half to one second (}\texttt{\DIFadd{500000-1000000}}\DIFadd{)
may be used to create behaviour similar to a real Mac, where the chime itself can be used
as a signal for when hotkeys can be pressed. The boot chime is inevitable later in the boot
sequence in OpenCore than on Apple hardware, due to the fact that non-native drivers
have to be loaded and connected first. This longer additional delay can also be useful
in systems where fast boot time and/or slow monitor signal synchronisation may cause the
boot logo not to be shown at all on some boots or reboots.