/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nDefault value: false\nDescription: Reset BGRT table Displayed status field to false.\nThis works around firmwares that provide BGRT table but fail to handle screen updates afterwards."; ObjectID = "0zY-cF-e9r"; */
"0zY-cF-e9r.ibShadowedToolTip" = "Type: plist boolean\nDefault value: false\nDescription: Reset BGRT table Displayed status field to false.\nThis works around firmwares that provide BGRT table but fail to handle screen updates afterwards.";
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nDefault value: false\nDescription: Reset BGRT table Displayed status field to false.\nThis works around firmware that provide a BGRT table but fail to handle screen updates afterwards."; ObjectID = "0zY-cF-e9r"; */
"0zY-cF-e9r.ibShadowedToolTip" = "Type: plist boolean\nDefault value: false\nDescription: Reset BGRT table Displayed status field to false.\nThis works around firmware that provide a BGRT table but fail to handle screen updates afterwards.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n2. Count\nType: plist integer\nDefault value: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI patch will not be used unless set to true.\n4. Find\nType: plist data\nDefault value: Empty data\nDescription: Data to find. Must equal to Replace in size.\n5. Limit\nType: plist integer\nDefault value: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole ACPI table.\n6. Mask\nType: plist data\nDefault value: Empty data\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n7. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n8. Replace\nType: plist data\nDefault value: Empty data\nDescription: Replacement data of one or more bytes.\n9. ReplaceMask\nType: plist data\nDefault value: Empty data\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n10. Skip\nType: plist integer\nDefault value: 0\nDescription: Number of found occurrences to be skipped before replacement is done.\n11. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n12. TableSignature Type:\ntextttplist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero."; ObjectID = "2tM-Ig-MFJ"; */
"2tM-Ig-MFJ.ibShadowedToolTip" = "1. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n2. Count\nType: plist integer\nDefault value: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI patch will not be used unless set to true.\n4. Find\nType: plist data\nDefault value: Empty data\nDescription: Data to find. Must equal to Replace in size.\n5. Limit\nType: plist integer\nDefault value: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole ACPI table.\n6. Mask\nType: plist data\nDefault value: Empty data\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n7. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n8. Replace\nType: plist data\nDefault value: Empty data\nDescription: Replacement data of one or more bytes.\n9. ReplaceMask\nType: plist data\nDefault value: Empty data\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n10. Skip\nType: plist integer\nDefault value: 0\nDescription: Number of found occurrences to be skipped before replacement is done.\n11. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n12. TableSignature Type:\ntextttplist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n2. Count\nType: plist integer\nDefault value: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI patch will not be used unless set to true.\n4. Find\nType: plist data\nDefault value: Empty\nDescription: Data to find. Must equal to Replace in size.\n5. Limit\nType: plist integer\nDefault value: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole ACPI table.\n6. Mask\nType: plist data\nDefault value: Empty (Ignored)\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Must be equal to Replace in size if set.\n7. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n8. Replace\nType: plist data\nDefault value: Empty\nDescription: Replacement data of one or more bytes.\n9. ReplaceMask\nType: plist data\nDefault value: Empty (Ignored)\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Must be equal to Replace in size if set.\n10. Skip\nType: plist integer\nDefault value: 0\nDescription: Number of found occurrences to be skipped before replacement is done.\n11. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n12. TableSignature Type:\ntextttplist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero."; ObjectID = "2tM-Ig-MFJ"; */
"2tM-Ig-MFJ.ibShadowedToolTip" = "1. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n2. Count\nType: plist integer\nDefault value: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI patch will not be used unless set to true.\n4. Find\nType: plist data\nDefault value: Empty\nDescription: Data to find. Must equal to Replace in size.\n5. Limit\nType: plist integer\nDefault value: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole ACPI table.\n6. Mask\nType: plist data\nDefault value: Empty (Ignored)\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Must be equal to Replace in size if set.\n7. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n8. Replace\nType: plist data\nDefault value: Empty\nDescription: Replacement data of one or more bytes.\n9. ReplaceMask\nType: plist data\nDefault value: Empty (Ignored)\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Must be equal to Replace in size if set.\n10. Skip\nType: plist integer\nDefault value: 0\nDescription: Number of found occurrences to be skipped before replacement is done.\n11. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n12. TableSignature Type:\ntextttplist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.";
/* Class = "NSTextFieldCell"; title = "Loading Resources"; ObjectID = "7g0-XW-xjy"; */
"7g0-XW-xjy.title" = "Loading Resources";
/* Class = "NSTableView"; ibShadowedToolTip = "1. All\nType: plist boolean\nDefault value: false\nDescription: If set to true, all ACPI tables matching the condition will be deleted. Otherwise only first matched table.\n2. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be removed unless set to true.\n4. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n5. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n6. TableSignature\nType: plist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.\n\nNote: Make sure not to specify table signature when the sequence needs to be replaced in multiple places. Especially when performing different kinds of renames."; ObjectID = "8sm-zn-vNl"; */
"8sm-zn-vNl.ibShadowedToolTip" = "1. All\nType: plist boolean\nDefault value: false\nDescription: If set to true, all ACPI tables matching the condition will be deleted. Otherwise only first matched table.\n2. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be removed unless set to true.\n4. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n5. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n6. TableSignature\nType: plist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.\n\nNote: Make sure not to specify table signature when the sequence needs to be replaced in multiple places. Especially when performing different kinds of renames.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. All\nType: plist boolean\nDefault value: false\nDescription: If set to true, all ACPI tables matching the condition will be deleted. Otherwise only first matched table.\n2. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be removed unless set to true.\n4. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n5. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n6. TableSignature\nType: plist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.\n\nNote: Make sure not to specify table signature when the sequence needs to be replaced in multiple places. Especially when performing different kinds of renames."; ObjectID = "8sm-zn-vNl"; */
"8sm-zn-vNl.ibShadowedToolTip" = "1. All\nType: plist boolean\nDefault value: false\nDescription: If set to true, all ACPI tables matching the condition will be deleted. Otherwise only first matched table.\n2. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be removed unless set to true.\n4. OemTableId\nType: plist data, 8 bytes\nDefault value: All zero\nDescription: Match table OEM ID to be equal to this value unless all zero.\n5. TableLength\nType: plist integer\nDefault value: 0\nDescription: Match table size to be equal to this value unless 0.\n6. TableSignature\nType: plist data, 4 bytes\nDefault value: All zero\nDescription: Match table signature to be equal to this value unless all zero.\n\nNote: Make sure not to specify table signature when the sequence needs to be replaced in multiple places. Especially when performing different kinds of renames.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n\n2. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be added unless set to true.\n\n3. Path\nType: plist string\nDefault value: Empty string\nDescription: File paths meant to be loaded as ACPI tables. Example values include DSDT.aml, SubDir/SSDT-8.aml, SSDT-USBX.aml, etc.\n\nACPI table load order follows the item order in the array. All ACPI tables load from OC/ACPI/Custom directory. Note: All tables but tables with DSDT table identifier (determined by parsing data not by filename) insert new tables into ACPI stack. DSDT, unlike the rest, performs replacement of DSDT table."; ObjectID = "9ZU-zR-Tmy"; */
"9ZU-zR-Tmy.ibShadowedToolTip" = "1. Comment\nType: plist string\nDefault value: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n\n2. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be added unless set to true.\n\n3. Path\nType: plist string\nDefault value: Empty string\nDescription: File paths meant to be loaded as ACPI tables. Example values include DSDT.aml, SubDir/SSDT-8.aml, SSDT-USBX.aml, etc.\n\nACPI table load order follows the item order in the array. All ACPI tables load from OC/ACPI/Custom directory. Note: All tables but tables with DSDT table identifier (determined by parsing data not by filename) insert new tables into ACPI stack. DSDT, unlike the rest, performs replacement of DSDT table.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n\n2. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be added unless set to true.\n\n3. Path\nType: plist string\nDefault value: Empty\nDescription: File paths meant to be loaded as ACPI tables. Example values include DSDT.aml, SubDir/SSDT-8.aml, SSDT-USBX.aml, etc.\n\nACPI table load order follows the item order in the array. All ACPI tables load from OC/ACPI/Custom directory. Note: All tables but tables with DSDT table identifier (determined by parsing data not by filename) insert new tables into ACPI stack. DSDT, unlike the rest, performs replacement of DSDT table."; ObjectID = "9ZU-zR-Tmy"; */
"9ZU-zR-Tmy.ibShadowedToolTip" = "1. Comment\nType: plist string\nDefault value: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n\n2. Enabled\nType: plist boolean\nDefault value: false\nDescription: This ACPI table will not be added unless set to true.\n\n3. Path\nType: plist string\nDefault value: Empty\nDescription: File paths meant to be loaded as ACPI tables. Example values include DSDT.aml, SubDir/SSDT-8.aml, SSDT-USBX.aml, etc.\n\nACPI table load order follows the item order in the array. All ACPI tables load from OC/ACPI/Custom directory. Note: All tables but tables with DSDT table identifier (determined by parsing data not by filename) insert new tables into ACPI stack. DSDT, unlike the rest, performs replacement of DSDT table.";
/* Class = "NSButtonCell"; title = "RebuildAppleMemoryMap"; ObjectID = "Qht-28-YA5"; */
"Qht-28-YA5.title" = "RebuildAppleMemoryMap";
/* Class = "NSScrollView"; ibShadowedToolTip = "1. Address\nType: plist integer\nFailsafe: 0\nDescription: Exceptional MMIO address, which memory descriptor should be left virtualised (unchanged) by DevirtualiseMmio. This means that the firmware will be able to directly communicate with this memory region during operating system functioning, because the region this value is in will be assigned a virtual address.\nThe addresses written here must be part of the memory map, have EfiMemoryMappedIO type and EFI_MEMORY_RUNTIME attribute (highest bit) set. To find the list of the candidates the debug log can be used.\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This address will be devirtualised unless set to true."; ObjectID = "RWw-Gp-0A4"; */
"RWw-Gp-0A4.ibShadowedToolTip" = "1. Address\nType: plist integer\nFailsafe: 0\nDescription: Exceptional MMIO address, which memory descriptor should be left virtualised (unchanged) by DevirtualiseMmio. This means that the firmware will be able to directly communicate with this memory region during operating system functioning, because the region this value is in will be assigned a virtual address.\nThe addresses written here must be part of the memory map, have EfiMemoryMappedIO type and EFI_MEMORY_RUNTIME attribute (highest bit) set. To find the list of the candidates the debug log can be used.\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This address will be devirtualised unless set to true.";
/* Class = "NSScrollView"; ibShadowedToolTip = "1. Address\nType: plist integer\nFailsafe: 0\nDescription: Exceptional MMIO address, which memory descriptor should be left virtualised (unchanged) by DevirtualiseMmio. This means that the firmware will be able to directly communicate with this memory region during operating system functioning, because the region this value is in will be assigned a virtual address.\nThe addresses written here must be part of the memory map, have EfiMemoryMappedIO type and EFI_MEMORY_RUNTIME attribute (highest bit) set. To find the list of the candidates the debug log can be used.\n2. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This address will be devirtualised unless set to true."; ObjectID = "RWw-Gp-0A4"; */
"RWw-Gp-0A4.ibShadowedToolTip" = "1. Address\nType: plist integer\nFailsafe: 0\nDescription: Exceptional MMIO address, which memory descriptor should be left virtualised (unchanged) by DevirtualiseMmio. This means that the firmware will be able to directly communicate with this memory region during operating system functioning, because the region this value is in will be assigned a virtual address.\nThe addresses written here must be part of the memory map, have EfiMemoryMappedIO type and EFI_MEMORY_RUNTIME attribute (highest bit) set. To find the list of the candidates the debug log can be used.\n2. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This address will be devirtualised unless set to true.";
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean \nFailsafe: false \nDescription: Report macOS being loaded through OS Info for any OS. \n\nThis quirk is useful on Mac firmwares, which behaves differently in different OS. For example, it is supposed to enable Intel GPU in Windows and Linux in some dual-GPU MacBook models."; ObjectID = "Ryj-m2-2MI"; */
"Ryj-m2-2MI.ibShadowedToolTip" = "Type: plist boolean \nFailsafe: false \nDescription: Report macOS being loaded through OS Info for any OS. \n\nThis quirk is useful on Mac firmwares, which behaves differently in different OS. For example, it is supposed to enable Intel GPU in Windows and Linux in some dual-GPU MacBook models.";
...
...
@@ -92,8 +92,8 @@
/* Class = "NSButtonCell"; title = "DisableSingleUser"; ObjectID = "bMR-Kw-wwp"; */
"bMR-Kw-wwp.title" = "DisableSingleUser";
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allows booting macOS through a relocation block.\n\nRelocation block is a scratch buffer allocated in lower 4 GB to be used for loading the kernel and related structures by EfiBoot on firmwares where lower memory is otherwise occupied by the (assumed to be) non-runtime data.\nRight before kernel startup the relocation block is copied back to lower addresses. Similarly all the other addresses pointing to relocation block are also carefully adjusted. Relocation block can be used when:\n• No better slide exists (all the memory is used)\n• slide=0 is forced (by an argument or safe mode)\n• KASLR (slide) is unsupported (this is macOS 10.7 or older)\n\nThis quirk requires ProvideCustomSlide to also be enabled and generally needs AvoidRuntimeDefrag to work correctly. Hibernation is not supported when booting with a relocation block (but relocation block is not always used when the quirk is enabled).\n\nNote: While this quirk is required to run older macOS versions on platforms with used lower memory it is not compatible with some hardware and macOS 11. In this case you may try to use EnableSafeModeSlide instead."; ObjectID = "bib-aL-YwI"; */
"bib-aL-YwI.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Allows booting macOS through a relocation block.\n\nRelocation block is a scratch buffer allocated in lower 4 GB to be used for loading the kernel and related structures by EfiBoot on firmwares where lower memory is otherwise occupied by the (assumed to be) non-runtime data.\nRight before kernel startup the relocation block is copied back to lower addresses. Similarly all the other addresses pointing to relocation block are also carefully adjusted. Relocation block can be used when:\n• No better slide exists (all the memory is used)\n• slide=0 is forced (by an argument or safe mode)\n• KASLR (slide) is unsupported (this is macOS 10.7 or older)\n\nThis quirk requires ProvideCustomSlide to also be enabled and generally needs AvoidRuntimeDefrag to work correctly. Hibernation is not supported when booting with a relocation block (but relocation block is not always used when the quirk is enabled).\n\nNote: While this quirk is required to run older macOS versions on platforms with used lower memory it is not compatible with some hardware and macOS 11. In this case you may try to use EnableSafeModeSlide instead.";
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allows booting macOS through a relocation block.\n\nRelocation block is a scratch buffer allocated in lower 4 GB to be used for loading the kernel and related structures by EfiBoot on firmwares where lower memory is otherwise occupied by the (assumed to be) non-runtime data.\nRight before kernel startup the relocation block is copied back to lower addresses. Similarly all the other addresses pointing to relocation block are also carefully adjusted. Relocation block can be used when:\n• No better slide exists (all the memory is used)\n• slide=0 is forced (by an argument or safe mode)\n• KASLR (slide) is unsupported (this is macOS 10.7 or older)\n\nThis quirk requires ProvideCustomSlide to also be enabled and generally needs AvoidRuntimeDefrag to work correctly. Hibernation is not supported when booting with a relocation block (but relocation block is not always used when the quirk is enabled).\n\nNote: While this quirk is required to run older macOS versions on platforms with used lower memory it is not compatible with some hardware and macOS 11. In such cases, consider using EnableSafeModeSlide instead."; ObjectID = "bib-aL-YwI"; */
"bib-aL-YwI.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Allows booting macOS through a relocation block.\n\nRelocation block is a scratch buffer allocated in lower 4 GB to be used for loading the kernel and related structures by EfiBoot on firmwares where lower memory is otherwise occupied by the (assumed to be) non-runtime data.\nRight before kernel startup the relocation block is copied back to lower addresses. Similarly all the other addresses pointing to relocation block are also carefully adjusted. Relocation block can be used when:\n• No better slide exists (all the memory is used)\n• slide=0 is forced (by an argument or safe mode)\n• KASLR (slide) is unsupported (this is macOS 10.7 or older)\n\nThis quirk requires ProvideCustomSlide to also be enabled and generally needs AvoidRuntimeDefrag to work correctly. Hibernation is not supported when booting with a relocation block (but relocation block is not always used when the quirk is enabled).\n\nNote: While this quirk is required to run older macOS versions on platforms with used lower memory it is not compatible with some hardware and macOS 11. In such cases, consider using EnableSafeModeSlide instead.";
/* Class = "NSButtonCell"; title = "AllowRelocationBlock"; ObjectID = "oFh-ac-Blm"; */
"oFh-ac-Blm.title" = "AllowRelocationBlock";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Arch\nType: plist string\nFailsafe: Any\nDescription: Booter patch architecture (Any, i386, x86_64).\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Count\nType: plist integer\nFailsafe: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This booter patch will not be used unless set to true.\n5. Find\nType: plist data\nFailsafe: Empty data\nDescription: Data to find. This must equal to Replace in size.\n6. Identifier\nType: plist string\nFailsafe: Empty string\nDescription: Apple for macOS booter (generally boot.efi); or a name with suffix (e.g. bootmgfw.efi) for a specific booter; or Any / empty string (failsafe) to match any booter.\n7. Limit\nType: plist integer\nFailsafe: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole booter.\n8. Mask\nType: plist data\nFailsafe: Empty data\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Can be set to empty data to be ignored. Must equal to Find in size otherwise.\n9. Replace\nType: plist data\nFailsafe: Empty data\nDescription: Replacement data of one or more bytes.\n10. ReplaceMask\nType: plist data\nFailsafe: Empty data\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n11. Skip\nType: plist integer\nFailsafe: 0\nDescription: Number of found occurrences to be skipped before replacement is done."; ObjectID = "oWj-qp-bH5"; */
"oWj-qp-bH5.ibShadowedToolTip" = "1. Arch\nType: plist string\nFailsafe: Any\nDescription: Booter patch architecture (Any, i386, x86_64).\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Count\nType: plist integer\nFailsafe: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This booter patch will not be used unless set to true.\n5. Find\nType: plist data\nFailsafe: Empty data\nDescription: Data to find. This must equal to Replace in size.\n6. Identifier\nType: plist string\nFailsafe: Empty string\nDescription: Apple for macOS booter (generally boot.efi); or a name with suffix (e.g. bootmgfw.efi) for a specific booter; or Any / empty string (failsafe) to match any booter.\n7. Limit\nType: plist integer\nFailsafe: 0\nDescription: Maximum number of bytes to search for. Can be set to 0 to look through the whole booter.\n8. Mask\nType: plist data\nFailsafe: Empty data\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Can be set to empty data to be ignored. Must equal to Find in size otherwise.\n9. Replace\nType: plist data\nFailsafe: Empty data\nDescription: Replacement data of one or more bytes.\n10. ReplaceMask\nType: plist data\nFailsafe: Empty data\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Can be set to empty data to be ignored. Must equal to Replace in size otherwise.\n11. Skip\nType: plist integer\nFailsafe: 0\nDescription: Number of found occurrences to be skipped before replacement is done.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Arch\nType: plist string\nFailsafe: Any\nDescription: Booter patch architecture (Any, i386, x86_64).\n2. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Count\nType: plist integer\nFailsafe: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This booter patch will not be used unless set to true.\n5. Find\nType: plist data\nFailsafe: Empty\nDescription: Data to find. This must equal to Replace in size.\n6. Identifier\nType: plist string\nFailsafe: Empty\nDescription: Apple for macOS booter (generally boot.efi); or a name with suffix (e.g. bootmgfw.efi) for a specific booter; or Any / empty string (failsafe) to match any booter.\n7. Limit\nType: plist integer\nFailsafe: 0 (Search the entire booter)\nDescription: Maximum number of bytes to search for.\n8. Mask\nType: plist data\nFailsafe: Empty (Ignored)\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Must equal to Find in size if set.\n9. Replace\nType: plist data\nFailsafe: Empty\nDescription: Replacement data of one or more bytes.\n10. ReplaceMask\nType: plist data\nFailsafe: Empty (Ignored)\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Must equal to Replace in size if set.\n11. Skip\nType: plist integer\nFailsafe: 0\nDescription: Number of found occurrences to be skipped before replacement is done."; ObjectID = "oWj-qp-bH5"; */
"oWj-qp-bH5.ibShadowedToolTip" = "1. Arch\nType: plist string\nFailsafe: Any\nDescription: Booter patch architecture (Any, i386, x86_64).\n2. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Count\nType: plist integer\nFailsafe: 0\nDescription: Number of patch occurrences to apply. 0 applies the patch to all occurrences found.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This booter patch will not be used unless set to true.\n5. Find\nType: plist data\nFailsafe: Empty\nDescription: Data to find. This must equal to Replace in size.\n6. Identifier\nType: plist string\nFailsafe: Empty\nDescription: Apple for macOS booter (generally boot.efi); or a name with suffix (e.g. bootmgfw.efi) for a specific booter; or Any / empty string (failsafe) to match any booter.\n7. Limit\nType: plist integer\nFailsafe: 0 (Search the entire booter)\nDescription: Maximum number of bytes to search for.\n8. Mask\nType: plist data\nFailsafe: Empty (Ignored)\nDescription: Data bitwise mask used during find comparison. Allows fuzzy search by ignoring not masked (set to zero) bits. Must equal to Find in size if set.\n9. Replace\nType: plist data\nFailsafe: Empty\nDescription: Replacement data of one or more bytes.\n10. ReplaceMask\nType: plist data\nFailsafe: Empty (Ignored)\nDescription: Data bitwise mask used during replacement. Allows fuzzy replacement by updating masked (set to non-zero) bits. Must equal to Replace in size if set.\n11. Skip\nType: plist integer\nFailsafe: 0\nDescription: Number of found occurrences to be skipped before replacement is done.";
/* Class = "NSButtonCell"; title = "DevirtualiseMmio"; ObjectID = "pkh-Nr-Lgr"; */
/* Class = "NSButtonCell"; title = "Expose OpenCore version in boot picker menu title."; ObjectID = "7NC-lm-XEM"; */
"7NC-lm-XEM.title" = "Expose OpenCore version in boot picker menu title.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode."; ObjectID = "8Gl-6A-OsL"; */
"8Gl-6A-OsL.ibShadowedToolTip" = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode.";
/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode."; ObjectID = "8Gl-6A-OsL"; */
"8Gl-6A-OsL.ibShadowedToolTip" = "1. Arguments\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode.";
/* Class = "NSTextFieldCell"; title = "PasswordSalt"; ObjectID = "8Xp-t8-QVB"; */
"8Xp-t8-QVB.title" = "PasswordSalt";
...
...
@@ -149,9 +149,6 @@
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Ignore boot options trying to update Apple peripheral firmware (e.g. MultiUpdater.efi).\n\nNote: This option exists due to some operating systems, namely macOS Big Sur, being incapable of disabling firmware updates with the NVRAM variable (run-efi-updater)."; ObjectID = "Nph-Bb-8b6"; */
"Nph-Bb-8b6.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Ignore boot options trying to update Apple peripheral firmware (e.g. MultiUpdater.efi).\n\nNote: This option exists due to some operating systems, namely macOS Big Sur, being incapable of disabling firmware updates with the NVRAM variable (run-efi-updater).";
/* Class = "NSTextFieldCell"; title = "BootProtect"; ObjectID = "OeD-Mz-a2a"; */
"OeD-Mz-a2a.title" = "BootProtect";
/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable screen reader by default in boot picker.\nFor macOS bootloader screen reader preference is set in preferences.efires archive in isVOEnabled.int32 file and is controlled by the operating system. For OpenCore screen reader support this option is an independent equivalent. Toggling screen reader support in both OpenCore boot picker and macOS bootloader FileVault 2 login window can also be done with Command + F5 key combination.\nNote: screen reader requires working audio support, see UEFI Audio Properties section for more details."; ObjectID = "PDS-bo-Qx8"; */
"PDS-bo-Qx8.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable screen reader by default in boot picker.\nFor macOS bootloader screen reader preference is set in preferences.efires archive in isVOEnabled.int32 file and is controlled by the operating system. For OpenCore screen reader support this option is an independent equivalent. Toggling screen reader support in both OpenCore boot picker and macOS bootloader FileVault 2 login window can also be done with Command + F5 key combination.\nNote: screen reader requires working audio support, see UEFI Audio Properties section for more details.";
...
...
@@ -404,9 +401,6 @@
/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: None\nDescription: Hibernation detection mode. The following modes are supported:\n• None — Avoid hibernation (Recommended).\n• Auto — Use RTC and NVRAM detection.\n• RTC — Use RTC detection.\n• NVRAM — Use NVRAM detection."; ObjectID = "wPi-6s-R0s"; */
"wPi-6s-R0s.ibShadowedToolTip" = "Type: plist string\nFailsafe: None\nDescription: Hibernation detection mode. The following modes are supported:\n• None — Avoid hibernation (Recommended).\n• Auto — Use RTC and NVRAM detection.\n• RTC — Use RTC detection.\n• NVRAM — Use NVRAM detection.";
/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: None\nDescription: Attempt to provide bootloader persistence.\nValid values:\n• None — do nothing.\n• Bootstrap — create or update top-priority \\EFI\\OC\\Bootstrap\\Bootstrap.efi boot option in UEFI variable storage at bootloader startup. For this option to work RequestBootVarRouting is required to be enabled.\n• BootstrapShort — create a short boot option instead of a complete one, otherwise equivalent to Bootstrap.\n\nThis variant is useful for some older firmwares, Insyde in particular, but possibly others, which cannot handle full device paths.\nThis option provides integration with third-party operating system installation and upgrade at the times they overwrite \\EFI\\BOOT\\BOOTx64.efi file. By creating a custom option in Bootstrap mode this file path becomes no longer used for bootstrapping OpenCore.\n\nNote 1: Some types of firmware may have faulty NVRAM, no boot option support, or other incompatibilities. While unlikely, the use of this option may even cause boot failures. This option should be used without any warranty exclusively on the boards known to be compatible.\n\nNote 2: Be aware that while NVRAM reset executed from OpenCore should not erase the boot option created in Bootstrap, executing NVRAM reset prior to loading OpenCore will remove it. For significant implementation updates (e.g. in OpenCore 0.6.4) make sure to perform NVRAM reset with Bootstrap disabled before reenabling."; ObjectID = "xNT-zI-wd8"; */
"xNT-zI-wd8.ibShadowedToolTip" = "Type: plist string\nFailsafe: None\nDescription: Attempt to provide bootloader persistence.\nValid values:\n• None — do nothing.\n• Bootstrap — create or update top-priority \\EFI\\OC\\Bootstrap\\Bootstrap.efi boot option in UEFI variable storage at bootloader startup. For this option to work RequestBootVarRouting is required to be enabled.\n• BootstrapShort — create a short boot option instead of a complete one, otherwise equivalent to Bootstrap.\n\nThis variant is useful for some older firmwares, Insyde in particular, but possibly others, which cannot handle full device paths.\nThis option provides integration with third-party operating system installation and upgrade at the times they overwrite \\EFI\\BOOT\\BOOTx64.efi file. By creating a custom option in Bootstrap mode this file path becomes no longer used for bootstrapping OpenCore.\n\nNote 1: Some types of firmware may have faulty NVRAM, no boot option support, or other incompatibilities. While unlikely, the use of this option may even cause boot failures. This option should be used without any warranty exclusively on the boards known to be compatible.\n\nNote 2: Be aware that while NVRAM reset executed from OpenCore should not erase the boot option created in Bootstrap, executing NVRAM reset prior to loading OpenCore will remove it. For significant implementation updates (e.g. in OpenCore 0.6.4) make sure to perform NVRAM reset with Bootstrap disabled before reenabling.";
/* Class = "NSTextFieldCell"; title = "TakeoffDelay"; ObjectID = "yDl-hK-Eml"; */
