miscController.strings

/* Class = "NSButtonCell"; title = "DEBUG_INFO in DEBUG, NOOPT"; ObjectID = "0hR-wG-mgt"; */
"0hR-wG-mgt.title" = "DEBUG，NOOPT中的DEBUG信息";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable VirtualSMC-compatible authenticated restart.\nAuthenticated restart is a way to reboot FileVault 2 enabled macOS without entering the password. To perform authenticated restart one can use a dedicated terminal command: sudo fdesetup authrestart. It is also used when installing operating system updates.\nVirtualSMC performs authenticated restart by saving disk encryption key split in NVRAM and RTC, which despite being removed as soon as OpenCore starts, may be considered a security risk and thus is optional."; ObjectID = "0sy-D3-AKk"; */
"0sy-D3-AKk.ibShadowedToolTip" = "允许重启 FileVault2 分区时不用再次输密码, 有安全风险。\n与磁盘加密启动相关，一般选NO";

/* Class = "NSTableColumn"; headerCell.title = "Comment"; ObjectID = "1NZ-HO-WUF"; */
"1NZ-HO-WUF.headerCell.title" = "说明";

/* Class = "NSTableColumn"; headerCell.title = "Auxiliary"; ObjectID = "1fY-U6-4KQ"; */
"1fY-U6-4KQ.headerCell.title" = "辅助";

/* Class = "NSTableColumn"; headerCell.title = "Name"; ObjectID = "22Z-wl-E30"; */
"22Z-wl-E30.headerCell.title" = "名称";

/* Class = "NSButtonCell"; title = "Enable logging to Data Hub"; ObjectID = "2Qh-mc-sJw"; */
"2Qh-mc-sJw.title" = "启用记录到Data Hub";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nDefault value: 0\nDescription: A bitmask (sum) of enabled logging targets. By default all the logging output is hidden, so this option is required to be set when debugging is necessary.\nThe following logging targets are supported:\n• 0x01 — Enable logging, otherwise all log is discarded.\n• 0x02 — Enable basic console (onscreen) logging.\n• 0x04 — Enable logging to Data Hub.\n• 0x08 — Enable serial port logging.\n• 0x10 — Enable UEFI variable logging.\n• 0x20 — Enable non-volatile UEFI variable logging.\n• 0x40 — Enable logging to file.\nConsole logging prints less than all the other variants. Depending on the build type (RELEASE, DEBUG, or NOOPT) different amount of logging may be read (from least to most)."; ObjectID = "2Vb-s2-Ejp"; */
"2Vb-s2-Ejp.ibShadowedToolTip" = "0: 关闭日志记录\n3: 允许屏幕输出日志\n19: 允许屏幕输出 UEFI 变量日志\n67: 在 ESP 分区根目录生成日志文件 opencore-YYYY-MM-DD-HHMMSS.txt, 但屏幕上不显示日志！此功能需要用DEBUG版OC引导。";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "2dj-hB-QBF"; */
"2dj-hB-QBF.title" = "取消全选";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Save macOS kernel panic to OpenCore root partition.\nThe file is saved as panic-YYYY-MM-DD-HHMMSS.txt. It is strongly recommended to have keepsyms=1 boot argument to see debug symbols in the panic log. In case it was not present kpdescribe.sh utility (bundled with OpenCore) may be used to partially recover the stacktrace.\nDevelopment and debug kernels produce more helpful kernel panics. Consider downloading and installing\nKernelDebugKit from developer.apple.com when debugging a problem. To activate a development kernel you will need to add a kcsuffix=development boot argument. Use uname -a command to ensure that your current loaded kernel is a development (or a debug) kernel.\nIn case OpenCore kernel panic saving mechanism was not used, kernel panics may still be found in /Library/Logs/Diagnostic directory. Starting with macOS Catalina kernel panics are stored in JSON format, so they need to be preprocessedbefore passing to kpdescribe.sh: \ncat Kernel.panic | grep macOSProcessedStackshotData | python -c 'import json,sys;print(json.load(sys.stdin)[\"macOSPanicString\"])'"; ObjectID = "2lk-2r-hIW"; */
"2lk-2r-hIW.ibShadowedToolTip" = "将macOS内核紧急情况保存到OpenCore根分区。\n该文件保存为panic-YYYY-MM-DD-HHMMSS.txt格式。 强烈建议使用keepsyms = 1引导参数来查看紧急日志中的调试符号。 如果不存在，则可以使用kpdescribe.sh实用程序（与OpenCore捆绑在一起）部分恢复堆栈跟踪。\n开发和调试内核会产生更多有用的内核恐慌。 考虑下载并安装\n调试时，请使用来自developer.apple.com的KernelDebugKit。 要激活开发内核，您将需要添加kcsuffix = development引导参数。 使用uname -a命令来确保当前加载的内核是开发（或调试）内核。\n如果未使用OpenCore内核应急保存机制，则可在/Library/Logs/Diagnostic目录中找到内核应急。 从macOS开始，Catalina内核紧急事件以JSON格式存储，因此在传递给kpdescribe.sh之前需要对其进行预处理： \ncat Kernel.panic | grep macOSProcessedStackshotData | python -c 'import json,sys;print(json.load(sys.stdin)[\"macOSPanicString\"])'";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "3K9-EU-jse"; */
"3K9-EU-jse.title" = "全选";

/* Class = "NSTabViewItem"; label = "Boot"; ObjectID = "3fm-9G-OpP"; */
"3fm-9G-OpP.label" = "Boot";

/* Class = "NSTabViewItem"; label = "Security"; ObjectID = "3fm-Nz-fHj"; */
"3fm-Nz-fHj.label" = "Security";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Builtin\nDescription: Choose boot picker used for boot management.\nPicker describes underlying boot management with an optional user interface responsible for handling boot\noptions. The following values are supported:\n• Builtin — boot management is handled by OpenCore, a simple text only user interface is used.\n• External — an external boot management protocol is used if available. Otherwise Builtin mode is used.\n• Apple — Apple boot management is used if available. Otherwise Builtin mode is used.\n\nUpon success External mode will entirely disable all boot management in OpenCore except policy enforcement. See OpenCanopy plugin for an example of a custom user interface.\nOpenCore built-in boot picker contains a set of actions chosen during the boot process. The list of supported actions is similar to Apple BDS and in general can be accessed by holding action hotkeys during boot process. Currently the following actions are considered:\n• Default — this is the default option, and it lets OpenCore built-in boot picker to loads the default boot option as specified in Startup Disk preference pane.\n• ShowPicker — this option forces picker to show. Normally it can be achieved by holding OPT key during boot. Setting ShowPicker to true will make ShowPicker the default option.\n• ResetNvram — this option performs select UEFI variable erase and is normally achieved by holding CMD+OPT+P+R key combination during boot. Another way to erase UEFI variables is to choose Reset NVRAM in the picker. This option requires AllowNvramReset to be set to true.\n• BootApple — this options performs booting to the first found Apple operating system unless the default chosen operating system is already made by Apple. Hold X key to choose this option.\n• BootAppleRecovery — this option performs booting to Apple operating system recovery. Either the one related to the default chosen operating system, or first found in case default chosen operating system is not made by Apple or has no recovery. Hold CMD+R key combination to choose this option.\nNote 1: Activated KeySupport, OpenUsbKbDxe, or similar driver is required for key handling to work. On many firmwares it is not possible to get all the keys function.\nNote 2: In addition to OPT OpenCore supports Escape key to display picker when ShowPicker is disabled. This key exists for Apple picker mode and for firmwares with PS/2 keyboards that fail to report held OPT key and require continual presses of Escape key to enter the boot menu.\nNote 3: On Macs with problematic GOP it may be difficult to access Apple BootPicker. To workaround this problem even without loading OpenCore BootKicker utility can be blessed."; ObjectID = "5Or-M0-hZS"; */
"5Or-M0-hZS.ibShadowedToolTip" = "选择用于启动管理的启动选择器\n支持以下值:\n•Builtin(默认值)-引导管理由OpenCore处理，使用纯文本用户界面。\n•External-使用外部引导管理协议（如果可用),否则，将使用Builtin模式。\n•Apple-使用Apple引导管理(如果可用),否则，将使用Builtin模式。";

/* Class = "NSButtonCell"; title = "Enable UEFI variable logging"; ObjectID = "6U3-np-fQe"; */
"6U3-np-fQe.title" = "启用UEFI变量记录";

/* Class = "NSTextFieldCell"; title = "Timeout"; ObjectID = "6hf-UH-eBA"; */
"6hf-UH-eBA.title" = "Timeout\n等待时间";

/* Class = "NSButtonCell"; title = "HideAuxiliary"; ObjectID = "7BP-eo-vIZ"; */
"7BP-eo-vIZ.title" = "HideAuxiliary\n隐藏辅助条目";

/* Class = "NSButtonCell"; title = "Expose OpenCore version in boot picker menu title."; ObjectID = "7NC-lm-XEM"; */
"7NC-lm-XEM.title" = "在启动菜单标题中显示OpenCore版本.";

/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi."; ObjectID = "8Gl-6A-OsL"; */
"8Gl-6A-OsL.ibShadowedToolTip" = "用于指定OpenCore无法自动找到的无规律引导路径。\n名称:OpenCore启动项中显示的名称\n启用:启用或禁用\n辅助:设置条目为辅助条目，可在启动菜单中隐藏\n路径:\n引导磁盘的PCI路径，一般可以通过替换启动文件为DEBUG版本，然后勾选Disable WatchDog选项，Target选项填入67，启动一次后，在EFI分区里产生的日志文件里查找如: PciRoot(0x0)/Pci(0x1D,0x4)/Pci(0x0,0x0)/NVMe(0x1,09-63-E3-44-8B-44-1B-00)/HD(1,GPT,11F42760-7AB1-4DB5-924B-D12C52895FA9,0x28,0x64000)/\EFI\Microsoft\Boot\bootmgfw.efi这样的信息。\n可以提前在MACOS里使用diskutil info disk0s2 |grep \"UUID\"这样的命令提前获取到你想要启动的分区UUID，然后在日志文件里搜索UUID的值，可以快速获取到完整PCI路径！\n对于NDK的fork(MOD)版本，可在启动界面按F9保存所有启动设备路径到文件并保存在EFI分区";

/* Class = "NSButtonCell"; title = "Disable WatchDog"; ObjectID = "9LG-wP-7Np"; */
"9LG-wP-7Np.title" = "Disable WatchDog";

/* Class = "NSButtonCell"; title = "DEBUG_WARN in DEBUG, NOOPT, RELEASE"; ObjectID = "AEq-Xa-8FR"; */
"AEq-Xa-8FR.title" = "DEBUG，NOOPT和DEBUG中的DEBUG警告";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "Ai7-te-FXf"; */
"Ai7-te-FXf.title" = "全选";

/* Class = "NSTextFieldCell"; title = "Picker Mode"; ObjectID = "BYc-kG-loi"; */
"BYc-kG-loi.title" = "Picker Mode\n启动菜单模式";

/* Class = "NSButtonCell"; title = "Expose OpenCore version as an UEFI variable."; ObjectID = "Bcn-4Z-d2d"; */
"Bcn-4Z-d2d.title" = "将OpenCore版本公开为UEFI变量.";

/* Class = "NSButtonCell"; title = "Browse"; ObjectID = "Bpe-6y-ybA"; */
"Bpe-6y-ybA.title" = "浏览";

/* Class = "NSTextFieldCell"; title = "Expose Sensitive Data"; ObjectID = "DAS-KM-gwG"; */
"DAS-KM-gwG.title" = "Expose Sensitive Data";

/* Class = "NSButtonCell"; title = "Enable non-volatile UEFI variable logging"; ObjectID = "Da8-bR-9wd"; */
"Da8-bR-9wd.title" = "启用非易失性UEFI变量日志记录";

/* Class = "NSTableView"; ibShadowedToolTip = "Type: plist array\nDescription: Add custom scanning paths through bless model.\nDesigned to be filled with plist string entries containing absolute UEFI paths to customised bootloaders, for example, \\EFI\\Microsoft\\bootmgfw.efi for Microsoft bootloader. This allows unusual boot paths to be automaticlly discovered by the boot picker. Designwise they are equivalent to predefined blessed path, such as \\System\\Library\\CoreServices\\boot.efi, but unlike predefined bless paths they have highest priority."; ObjectID = "E7L-MW-EuK"; */
"E7L-MW-EuK.ibShadowedToolTip" = "用于添加自定义efi文件的引导绝对路径，比如添加Windows的bootmgfw.efi的位置以便识别Windows引导项,一般在OpenCore和Windows的引导文件在同一硬盘的同一ESP分区下使用，除非你有这种情况，不然我们不需要填写任何东西。\n比如启动WINDOWS路径:\\EFI\\Microsoft\\Boot\\bootmgfw.efi\n这允许引导选择器自动发现异常的引导路径,也可用于其他操作系统的引导路劲";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean \nFailsafe: false \nDescription: Ignore boot options trying to update Apple peripheral firmware (e.g. MultiUpdater.efi)."; ObjectID = "EQZ-0e-EuC"; */
"EQZ-0e-EuC.ibShadowedToolTip" = "禁止尝试更新Apple外设固件的引导选项，因为我们不是白苹果！";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_ESP"; ObjectID = "Edm-Vw-KuX"; */
"Edm-Vw-KuX.title" = "允许扫描EFI系统分区文件系统。";

/* Class = "NSTextFieldCell"; title = "Display Delay"; ObjectID = "FHv-7q-Wq3"; */
"FHv-7q-Wq3.title" = "Display Delay";

/* Class = "NSButtonCell"; title = "SysReport"; ObjectID = "GOG-QD-oyI"; */
"GOG-QD-oyI.title" = "SysReport";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "Gaf-gn-k6J"; */
"Gaf-gn-k6J.title" = "全选";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_EXT"; ObjectID = "H6a-QA-xQu"; */
"H6a-QA-xQu.title" = "允许扫描EXT(Linux)文件系统。";

/* Class = "NSButtonCell"; title = "Enable serial port logging"; ObjectID = "HjZ-gH-Q0b"; */
"HjZ-gH-Q0b.title" = "启用串行端口日志记录";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_PCI"; ObjectID = "I0K-dq-ofU"; */
"I0K-dq-ofU.title" = "允许扫描PCI设备";

/* Class = "NSButtonCell"; title = "AllowNvramReset"; ObjectID = "Jpe-QB-x2r"; */
"Jpe-QB-x2r.title" = "AllowNvramReset";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "KRE-fs-cVq"; */
"KRE-fs-cVq.title" = "取消全选";

/* Class = "NSButtonCell"; title = "Provides custom rendered titles for boot entries"; ObjectID = "L3h-6q-xRi"; */
"L3h-6q-xRi.title" = "提供引导条目的自定义渲染标题";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Select firmwares may not succeed in quickly booting the operating system, especially in debug mode, which results in watch dog timer aborting the process. This option turns off watch dog timer."; ObjectID = "LCd-qL-7KC"; */
"LCd-qL-7KC.ibShadowedToolTip" = "如果macOS在启动时卡在某些地方, 可能需要设置为YES, 通常用于排除错误干扰";

/* Class = "NSButtonCell"; title = "Changes used icon set to an alternate one if it is supported"; ObjectID = "NFd-Yp-DAy"; */
"NFd-Yp-DAy.title" = "如果支持，将使用过的图标集更改为备用图标";

/* Class = "NSTableColumn"; headerCell.title = "Enabled"; ObjectID = "NXw-uw-Jsu"; */
"NXw-uw-Jsu.headerCell.title" = "启用";

/* Class = "NSTextFieldCell"; title = "BootProtect"; ObjectID = "OeD-Mz-a2a"; */
"OeD-Mz-a2a.title" = "BootProtect";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable screen reader by default in boot picker.\nFor macOS bootloader screen reader preference is set in preferences.efires archive in isVOEnabled.int32 file and is controlled by the operating system. For OpenCore screen reader support this option is an independent equivalent. Toggling screen reader support in both OpenCore boot picker and macOS bootloader FileVault 2 login window can also be done with Command + F5 key combination.\nNote: screen reader requires working audio support, see UEFI Audio Properties section for more details."; ObjectID = "PDS-bo-Qx8"; */
"PDS-bo-Qx8.ibShadowedToolTip" = "在启动选择器中启用屏幕语音助理功能。\n也可以使用Command + F5组合键在OpenCore引导选择器和macOS引导加载器FileVault 2登录窗口中切换屏幕语音助理功能。\ n注意：屏幕语音辅助功能需要加载AudioDxe.ef音频驱动。";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "PDr-JO-EKf"; */
"PDr-JO-EKf.title" = "取消全选";

/* Class = "NSTextFieldCell"; title = "ConsoleAttributes"; ObjectID = "PIX-Ia-ajs"; */
"PIX-Ia-ajs.title" = "ConsoleAttributes\n文本启动菜单颜色";

/* Class = "NSButtonCell"; title = "Browse"; ObjectID = "Pkl-Zl-stw"; */
"Pkl-Zl-stw.title" = "浏览";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nDefault value: 0\nDescription: Delay in microseconds performed after every printed line visible onscreen (i.e. console)."; ObjectID = "PwU-cB-LIO"; */
"PwU-cB-LIO.ibShadowedToolTip" = "在屏幕上可见的每条打印行(即控制台)之后执行的延迟(以微秒为单位).默认忽略！";

/* Class = "NSTextField"; ibShadowedToolTip = "TakeoffDelay \nType: plist integer, 32 bit \nFailsafe: 0\nDescription: Delay in microseconds performed before handling picker startup and action hotkeys. \nIntroducing a delay may give extra time to hold the right action hotkey sequence to e.g. boot to recovery mode. On some platforms setting this option to at least 5000-10000 microseconds may be necessary to access action hotkeys at all due to the nature of the keyboard driver."; ObjectID = "QGG-If-K71"; */
"QGG-If-K71.ibShadowedToolTip" = "在使用启动菜单和使用键盘快捷键之前执行的延迟（以微秒为单位）。 \n使用这个选项可能会能更好的激活模拟苹果快捷键的功能，例如引导至恢复模式或其他。在某些平台上，由于键盘驱动程序的特性，可能完全需要将此选项设置为至少5000-10000微秒才能访问操作热键。";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Secure\nDescription: Enables vaulting mechanism in OpenCore.\nValid values:\n• Optional — require nothing, no vault is enforced, insecure.\n• Basic — require vault.plist file present in OC directory. This provides basic filesystem integrity verification and may protect from unintentional filesystem corruption.\n• Secure — require vault.sig signature file for vault.plist in OC directory. This includes Basic integrity checking but also attempts to build a trusted bootchain.\nvault.plist file should contain SHA-256 hashes for all files used by OpenCore. Presence of this file is highly recommended to ensure that unintentional file modifications (including filesystem corruption) do not happen unnoticed. To create this file automatically use create_vault.sh script. Regardless of the underlying filesystem, path name and case must match between config.plist and vault.plist.\nvault.sig file should contain a raw 256 byte RSA-2048 signature from SHA-256 hash of vault.plist. The signature is verified against the public key embedded into OpenCore.efi. To embed the public key you should do either of the following:\n• Provide public key during the OpenCore.efi compilation in OpenCoreVault.c file.\n• Binary patch OpenCore.efi replacing zeroes with the public key between =BEGIN OC VAULT= and ==END OC VAULT== ASCII markers.\nRSA public key 520 byte format description can be found in Chromium OS documentation. To convert public key from X.509 certificate or from PEM file use RsaTool.\n\nThe complete set of commands to:\n• Create vault.plist.\n• Create a new RSA key (always do this to avoid loading old configuration).\n• Embed RSA key into OpenCore.efi.\n• Create vault.sig.\n\nCan look as follows:\ncd /Volumes/EFI/EFI/OC/path/to/create_vault.sh .\n/path/to/RsaTool -sign vault.plist vault.sig vault.pub\noff=$(($(strings -a -t d OpenCore.efi | grep \"=BEGIN OC VAULT=\" | cut -f1 -d' ')+16))\ndd of=OpenCore.efi if=vault.pub bs=1 seek=$off count=528 conv=notrunc\nrm vault.pub\n\nNote 1: While it may appear obvious, but you have to use an external method to verify OpenCore.efi and BOOTx64.efi for secure boot path. For this you are recommended to at least enable UEFI SecureBoot with a custom certificate, and sign OpenCore.efi and BOOTx64.efi with your custom key. More details on customising secure boot on modern firmwares can be found in Taming UEFI SecureBoot paper (in Russian).\nNote 2: vault.plist and vault.sig are used regardless of this option when vault.plist is present or public key is embedded into OpenCore.efi. Setting this option will only ensure configuration sanity, and abort the boot process otherwise."; ObjectID = "QZk-2b-TCx"; */
"QZk-2b-TCx.ibShadowedToolTip" = "在OpenCore中启用安全保险柜机制。\n•Optional-不启用任何安全机制,一般我们选这个。\n•Basic-要求OC目录中存在vault.plist文件。这提供了基本的文件系统完整性验证，并可以防止意外的文件系统损坏。\n•Secure-要求OC目录中vault.plist的vault.sig签名文件。";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 64 bit\nDefault value: 0x80000000 (DEBUG_ERROR)\nDescription: EDK II debug level bitmask (sum) causing CPU to halt (stop execution) after obtaining a message of HaltLevel. Possible values match DisplayLevel values."; ObjectID = "QbL-ID-H0a"; */
"QbL-ID-H0a.ibShadowedToolTip" = "参考OC手册！";

/* Class = "NSButtonCell"; title = "BlacklistAppleUpdate"; ObjectID = "RvC-iy-QL7"; */
"RvC-iy-QL7.title" = "BlacklistAppleUpdate";

/* Class = "NSButtonCell"; title = "Expose OEM information as a set of UEFI variables."; ObjectID = "SLo-CJ-cas"; */
"SLo-CJ-cas.title" = "将OEM信息公开为一组UEFI变量.";

/* Class = "NSTableColumn"; headerCell.title = "Enabled"; ObjectID = "SPw-C4-qwL"; */
"SPw-C4-qwL.headerCell.title" = "启用";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "SZj-0R-9Uu"; */
"SZj-0R-9Uu.title" = "取消全选";

/* Class = "NSButtonCell"; title = "PollAppleHotKeys"; ObjectID = "TDv-Al-hb0"; */
"TDv-Al-hb0.title" = "PollAppleHotKeys\n启用模拟苹果热键";

/* Class = "NSTableColumn"; headerCell.title = "Arguments"; ObjectID = "ThF-JP-r8K"; */
"ThF-JP-r8K.headerCell.title" = "参数";

/* Class = "NSTextFieldCell"; title = "Hibernate Mode"; ObjectID = "TmR-t7-bmq"; */
"TmR-t7-bmq.title" = "Hibernate Mode\n休眠模式";

/* Class = "NSButtonCell"; title = "Enable logging to file"; ObjectID = "Uz7-yL-WDQ"; */
"Uz7-yL-WDQ.title" = "启用记录到文件";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 32 bit\nDefault value: 0x10F0103\nDescription: Define operating system detection policy.\nThis value allows to prevent scanning (and booting) from untrusted source based on a bitmask (sum) of select flags. As it is not possible to reliably detect every file system or device type, this feature cannot be fully relied upon in open environments, and the additional measures are to be applied.\nThird party drivers may introduce additional security (and performance) measures following the provided scan policy. Scan policy is exposed in scan-policy variable of 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102 GUID for UEFI Boot Services only.\n• 0x00000001 — OC_SCAN_FILE_SYSTEM_LOCK, restricts scanning to only known file systems defined as a part of this policy. File system drivers may not be aware of this policy, and to avoid mounting of undesired file systems it is best not to load its driver. This bit does not affect dmg mounting, which may have any file system. Known file systems are prefixed with OC_SCAN_ALLOW_FS_.\n• 0x00000002 — OC_SCAN_DEVICE_LOCK, restricts scanning to only known device types defined as a part of this policy. This is not always possible to detect protocol tunneling, so be aware that on some systems it may be possible for e.g. USB HDDs to be recognised as SATA. Cases like this must be reported. Known device types are prefixed with OC_SCAN_ALLOW_DEVICE_.\n• 0x00000100 — OC_SCAN_ALLOW_FS_APFS, allows scanning of APFS file system.\n• 0x00010000 — OC_SCAN_ALLOW_DEVICE_SATA, allow scanning SATA devices.\n• 0x00020000 — OC_SCAN_ALLOW_DEVICE_SASEX, allow scanning SAS and Mac NVMe devices.\n• 0x00040000 — OC_SCAN_ALLOW_DEVICE_SCSI, allow scanning SCSI devices.\n• 0x00080000 — OC_SCAN_ALLOW_DEVICE_NVME, allow scanning NVMe devices.\n• 0x00100000 — OC_SCAN_ALLOW_DEVICE_ATAPI, allow scanning CD/DVD devices.\n• 0x00200000 — OC_SCAN_ALLOW_DEVICE_USB, allow scanning USB devices.\n• 0x00400000 — OC_SCAN_ALLOW_DEVICE_FIREWIRE, allow scanning FireWire devices.\n• 0x00800000 — OC_SCAN_ALLOW_DEVICE_SDCARD, allow scanning card reader devices.\n• 0x01000000 (bit 24) — OC_SCAN_ALLOW_DEVICE_PCI, allow scanning devices directly connected to PCI bus (e.g. VIRTIO).\n\nNote: Given the above description, 0xF0103 value is expected to allow scanning of SATA, SAS, SCSI, and NVMe devices with APFS file system, and prevent scanning of any devices with HFS or FAT32 file systems in addition to not scanning APFS file systems on USB, CD, USB, and FireWire drives. The combination reads as:\n• OC_SCAN_FILE_SYSTEM_LOCK • OC_SCAN_DEVICE_LOCK\n• OC_SCAN_ALLOW_FS_APFS\n• OC_SCAN_ALLOW_DEVICE_SATA\n• OC_SCAN_ALLOW_DEVICE_SASEX\n• OC_SCAN_ALLOW_DEVICE_SCSI • OC_SCAN_ALLOW_DEVICE_NVME"; ObjectID = "VQF-Ne-GWu"; */
"VQF-Ne-GWu.ibShadowedToolTip" = "0: 允许扫描所有可用的硬盘\n其它值请参考官方文档, 对给出的选项做 16 进制加法运算";

/* Class = "NSButtonCell"; title = "OC_SCAN_FILE_SYSTEM_LOCK"; ObjectID = "Wnm-4q-QJ3"; */
"Wnm-4q-QJ3.title" = "扫描已知文件系统";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_NTFS"; ObjectID = "WsC-yj-V3g"; */
"WsC-yj-V3g.title" = "允许扫描NTFS文件系统。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SCSI"; ObjectID = "X1h-DD-gjM"; */
"X1h-DD-gjM.title" = "允许扫描SCSI设备";

/* Class = "NSTableColumn"; headerCell.title = "Name"; ObjectID = "XRf-Yz-PVv"; */
"XRf-Yz-PVv.headerCell.title" = "名称";

/* Class = "NSTableColumn"; headerCell.title = "Path*"; ObjectID = "XSQ-pS-WUn"; */
"XSQ-pS-WUn.headerCell.title" = "路径*";

/* Class = "NSButtonCell"; title = "Show Picker"; ObjectID = "YKi-Mp-w6e"; */
"YKi-Mp-w6e.title" = "Show Picker\n显示引导菜单";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_NVME"; ObjectID = "YQh-9A-q5Q"; */
"YQh-9A-q5Q.title" = "允许扫描NVMe设备";

/* Class = "NSTabViewItem"; label = "Debug"; ObjectID = "Yod-ne-FH8"; */
"Yod-ne-FH8.label" = "Debug";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Show simple boot picker to allow boot entry selection."; ObjectID = "Yyf-Yd-yrP"; */
"Yyf-Yd-yrP.ibShadowedToolTip" = "显示 OpenCore 的 UI, 用于查看可用引导项\n设置为 NO 可以跳过倒计时, 和 PollAppleHotKeys=Yes 配合快捷键可以大幅提升体验\n一般选择YES。";

/* Class = "NSButtonCell"; title = "Enable basic console (onscreen) logging"; ObjectID = "ZZP-5O-C0h"; */
"ZZP-5O-C0h.title" = "启用基本控制台(屏幕上)日志记录";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 32 bit\nDefault value: 0\nDescription: Timeout in seconds in boot picker before automatic booting of the default boot entry. Use 0 to disable timer."; ObjectID = "Zxi-ww-dWk"; */
"Zxi-ww-dWk.ibShadowedToolTip" = "倒计时进入指定可启动系统，这里我们按需求填写，我填写5，代表5秒钟进入指定系统。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SATA"; ObjectID = "aQY-Kx-ZCy"; */
"aQY-Kx-ZCy.title" = "允许扫描SATA设备";

/* Class = "NSTextFieldCell"; title = "Scan Policy"; ObjectID = "aUx-rK-UTX"; */
"aUx-rK-UTX.title" = "Scan Policy";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "b27-wQ-s5W"; */
"b27-wQ-s5W.title" = "全选";

/* Class = "NSButtonCell"; title = "PickerAudioAssist"; ObjectID = "cN2-ao-nCB"; */
"cN2-ao-nCB.title" = "PickerAudioAssist\n启用语音辅助";

/* Class = "NSTextFieldCell"; title = "Display Level"; ObjectID = "dam-Nc-xFX"; */
"dam-Nc-xFX.title" = "Display Level";

/* Class = "NSButtonCell"; title = "Provides predefined label images for boot entries without custom entries"; ObjectID = "dl8-kF-ipf"; */
"dl8-kF-ipf.title" = "为引导项提供预定义的标签图像，而无需自定义项";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Produce system report on ESP folder.\nThis option will create a SysReport directory on ESP partition unless it is already present. The directory will contain ACPI and SMBIOS dumps.\n\nNote: For security reasons SysReport option is not available in RELEASE builds. Use a DEBUG build if you need this option."; ObjectID = "eFH-QH-phT"; */
"eFH-QH-phT.ibShadowedToolTip" = "在EFI分区上生成系统报告。\n此选项将在ESP分区上创建SysReport目录， 该目录将包含ACPI和SMBIOS转储。\n\n注意：出于安全原因，RELEASE版本中不提供SysReport功能。如果需要此选项，请使用DEBUG版本。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_USB"; ObjectID = "eFc-bE-Fl5"; */
"eFc-bE-Fl5.title" = "允许扫描USB设备";

/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. It is implementation defined whether this value is used.\n3. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This tool will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable tool name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: File path to select UEFI tool relative to OC/Tools directory."; ObjectID = "eH6-nm-MdQ"; */
"eH6-nm-MdQ.ibShadowedToolTip" = "用于运行一些UEFI工具, 例如验证CFG Lock(VerifyMsrE2.efi),CleanNvram.efi\n名称:OpenCore 启动项中显示的名称\n启用:启用或禁用\n辅助:设置条目为辅助属性\n路径:Tools文件夹下的文件名\n如: VerifyMsrE2.efi,Shell.efi等";

/* Class = "NSTextFieldCell"; title = "Picker Attributes"; ObjectID = "eaZ-uU-2Tt"; */
"eaZ-uU-2Tt.title" = "Picker Attributes\nGUI界面设置属性";

/* Class = "NSTextFieldCell"; title = "Vault"; ObjectID = "fN9-q5-dg3"; */
"fN9-q5-dg3.title" = "Vault";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable boot.efi debug log saving to OpenCore log.\n\nNote: This option only applies to 10.15.4 and newer."; ObjectID = "fcn-ha-taM"; */
"fcn-ha-taM.ibShadowedToolTip" = "启用boot.efi调试日志保存到OpenCore日志。\n\n注意：此选项仅适用于10.15.4及更高版本。";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Perform serial port initialisation.\nThis option will perform serial port initialisation within OpenCore prior to enabling (any) debug logging. Serial port configuration is defined via PCDs at compile time in gEfiMdeModulePkgTokenSpaceGuid GUID. Default values as found in MdeModulePkg.dec are as follows:\n• PcdSerialBaudRate — Baud rate: 115200.\n• PcdSerialLineControl — Line control: no parity, 8 data bits, 1 stop bit.\n\nSee more details in Debugging section."; ObjectID = "fmg-zD-rrJ"; */
"fmg-zD-rrJ.ibShadowedToolTip" = "执行串行端口初始化。\n此选项将在启用调试日志记录之前在OpenCore中执行串行端口初始化。默认值如下:\n• PcdSerialBaudRate — Baud rate: 115200.\n• PcdSerialLineControl — Line control: no parity, 8 data bits, 1 stop bit.\n\n在“调试”部分中查看更多详细信息.";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\nBuiltin picker supports colour arguments as a sum of foreground and background colors according to UEFI specification. The value of black background and black foreground (0) is reserved. List of colour names:\n• 0x00 — EFI_BLACK\n• 0x01 — EFI_BLUE\n• 0x02 — EFI_GREEN\n• 0x03 — EFI_CYAN\n• 0x04 — EFI_RED\n• 0x05 — EFI_MAGENTA\n• 0x06 — EFI_BROWN\n• 0x07 — EFI_LIGHTGRAY\n• 0x08 — EFI_DARKGRAY\n• 0x09 — EFI_LIGHTBLUE\n• 0x0A — EFI_LIGHTGREEN\n• 0x0B — EFI_LIGHTCYAN\n• 0x0C — EFI_LIGHTRED\n• 0x0D — EFI_LIGHTMAGENTA \n• 0x0E — EFI_YELLOW\n• 0x0F — EFI_WHITE\n• 0x00 — EFI_BACKGROUND_BLACK\n• 0x10 — EFI_BACKGROUND_BLUE\n• 0x20 — EFI_BACKGROUND_GREEN\n• 0x30 — EFI_BACKGROUND_CYAN\n• 0x40 — EFI_BACKGROUND_RED\n• 0x50 — EFI_BACKGROUND_MAGENTA\n• 0x60 — EFI_BACKGROUND_BROWN\n• 0x70 — EFI_BACKGROUND_LIGHTGRAY\nNote: This option may not work well with System text renderer. Setting a background different from black could help testing proper GOP functioning."; ObjectID = "gD0-Iz-n35"; */
"gD0-Iz-n35.ibShadowedToolTip" = "设置启动菜单的颜色属性。\n支持根据UEFI规范将颜色参数的前景色和背景色之和计算并转为十进制填入。\n颜色名称列表：\n•0x00-EFI_BLACK\n•0x01-EFI_BLUE\n•0x02-EFI_GREEN\n•0x03-EFI_CYAN\n•0x04-EFI_RED\n•0x05-EFI_MAGENTA\n•0x06-EFI_BROWN\n•0x07-EFI_LIGHTGRAY\n•0x08-EFI_DARKGRAY\n•0x09-EFI_LIGHTBLUE\n•0x0A-EFI_LIGHTGREEN\n•0x0B-EFI_LIGHTCYAN\n•0x0C-EFI_LIGHTRED\n•0x0D-EFI_LIGHTMAGENTA\n•0x0E-EFI_BACKGROUND_LIGHTGRAY\n•0x0F-EFI_WHITE\n•0x00-EFI_BACKGROUND_BLACK\n•0x10-EFI_BACKGROUND_BLUE\n•0x20-EFI_BACKGROUND_GREEN\n•0x30-EFI_BACKGROUND_CYAN\n•0x40-EFI_BACK_ROG_RO_ROUND_RED\n•0x50-EFI_BACKGROUND_MAGENTA\n•0x60-EFI_BACKGROUND_BROWN\n•0x70-EFI_BACKGROUND_LIGHTGRAY\n注意：此选项可能不适用于系统文本渲染器。设置与黑色不同的背景可以帮助测试正确的GOP功能。";

/* Class = "NSTextFieldCell"; title = "Target"; ObjectID = "hAm-Ha-Meb"; */
"hAm-Ha-Meb.title" = "Target";

/* Class = "NSButtonCell"; title = "SerialInit"; ObjectID = "hRO-hk-wy8"; */
"hRO-hk-wy8.title" = "SerialInit";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\nDifferent pickers may be configured through\nthe attribute mask containing OpenCore-reserved (BIT0~BIT15) and OEM-specific (BIT16~BIT31) values.\nCurrent OpenCore values include:\n• 0x0001 — OC_ATTR_USE_VOLUME_ICON, provides custom icons for boot entries:\n\t– .VolumeIcon.icns  file at Preboot root for APFS. \n\t– .VolumeIcon.icns  file at volume root for other filesystems.\n\t– <TOOL_NAME>.icns  file for Tools.  \nVolume icons can be set in Finder. \n• 0x0002 — OC_ATTR_USE_DISK_LABEL_FILE, provides custom rendered titles for boot entries: 
\t– .disk_label  (.disk_label_2x) file near bootloader for all filesystems.
\t– <TOOL_NAME.lbl  (<TOOL_NAME.l2x) file near tool for Tools.
Prerendered labels can be generated via disklabel utility or bless command. When disabled or missing text labels (.contentDetails or .disk_label.contentDetails) are to be rendered instead.
• 0x0004 — OC_ATTR_USE_GENERIC_LABEL_IMAGE, provides predefined label images for boot entries without custom entries. May give less detail for the actual boot entry. \n• 0x0008 — OC_ATTR_USE_ALTERNATE_ICONS, changes used icon set to an alternate one if it is supported. For example, this could make a use of old-style icons with a custom background colour."; ObjectID = "hdQ-rL-KAo"; */
"hdQ-rL-KAo.ibShadowedToolTip" = "设置启动菜单(GUI界面)的属性。\n可以配置自定义的GUI界面风格，设置值包括:\n• 0x0001 —提供引导项的自定义图标:\n\t– APFS分区的预引导根目录下的.VolumeIcon.icns文件。 \n\t– 其他文件系统的卷根目录下的.VolumeIcon.icns文件。\n\t– <TOOL_NAME>.icns的工具图标文件.  \n可以在Finder中设置卷图标。 \n• 0x0002 — 提供引导条目的自定义渲染标题: 
\t– 引导器相关的.disk_label（.disk_label_2x）文件，用于所有文件系统。
\t– 工具相关的<TOOL_NAME.lbl和<TOOL_NAME.l2x文件.
可以通过disklabel实用程序或bless命令生成预渲染的标签.禁用或缺少文本标签时 (.contentDetails 或 .disk_label.contentDetails) 将被使用.\n
• 0x0004 — 提供引导条目的预定义标签图像，而无需自定义条目. 可能会缺少实际启动项的详细信息. \n• 0x0008 — 如果支持，将使用过的图标集更改为备用图标. 这样可以使用带有自定义背景色的老式图标。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_ATAPI"; ObjectID = "i2m-65-2vq"; */
"i2m-65-2vq.title" = "允许扫描CD/DVD设备";

/* Class = "NSTableColumn"; headerCell.title = "Path*"; ObjectID = "jPS-Bu-Ar4"; */
"jPS-Bu-Ar4.headerCell.title" = "路径*";

/* Class = "NSButtonCell"; title = "SkipCustomEntryCheck"; ObjectID = "mB0-8o-rL6"; */
"mB0-8o-rL6.title" = "SkipCustomEntryCheck";

/* Class = "NSButtonCell"; title = "DEBUG_VERBOSE in custom builds"; ObjectID = "mSr-7J-5Qp"; */
"mSr-7J-5Qp.title" = "自定义版本中的DEBUG_VERBOSE";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_APFS"; ObjectID = "mpH-5M-L70"; */
"mpH-5M-L70.title" = "允许扫描APFS文件系统";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_FIREWIRE"; ObjectID = "nmh-33-tbM"; */
"nmh-33-tbM.title" = "允许扫描FireWire设备";

/* Class = "NSTextFieldCell"; title = "Multiple selection allowed"; ObjectID = "nsA-hY-r1Q"; */
"nsA-hY-r1Q.title" = "可以多项选择(也可以直接拖拽efi文件到表格里)";

/* Class = "NSTabViewItem"; label = "Tools"; ObjectID = "oFg-pn-DgG"; */
"oFg-pn-DgG.label" = "Tools-添加附加工具";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "oL1-jF-NNm"; */
"oL1-jF-NNm.title" = "取消全选";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 64 bit\nDefault value: 0\nDescription: EDK II debug level bitmask (sum) showed onscreen. Unless Target enables console (onscreen) printing, onscreen debug output will not be visible. The following levels are supported (discover more in DebugLib.h):\n• 0x00000002 — DEBUG_WARN in DEBUG, NOOPT, RELEASE. \n• 0x00000040 — DEBUG_INFO in DEBUG, NOOPT.\n• 0x00400000 — DEBUG_VERBOSE in custom builds.\n• 0x80000000 — DEBUG_ERROR in DEBUG, NOOPT, RELEASE."; ObjectID = "omf-bH-d4v"; */
"omf-bH-d4v.ibShadowedToolTip" = "2147483714 在屏幕上显示所有 Debug 信息\n0 隐藏所有 Debug 信息!";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "pIV-PK-mVi"; */
"pIV-PK-mVi.title" = "全选";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allow CMD+OPT+P+R handling and enable showing NVRAM Reset entry in boot picker."; ObjectID = "pTC-aG-QK1"; */
"pTC-aG-QK1.ibShadowedToolTip" = "允许CMD + OPT + P + R或在启动菜单中显示ResetNVRAM重置菜单。";

/* Class = "NSTextFieldCell"; title = "Halt Level"; ObjectID = "pqr-DX-ZAM"; */
"pqr-DX-ZAM.title" = "Halt Level";

/* Class = "NSButtonCell"; title = "AllowSetDefault"; ObjectID = "qpq-Le-cti"; */
"qpq-Le-cti.title" = "AllowSetDefault";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allow CTRL+Enter and CTRL+Index handling to set the default boot option in boot picker."; ObjectID = "rQF-20-vFl"; */
"rQF-20-vFl.ibShadowedToolTip" = "允许用CTRL+Enter或CTRL+Index(启动菜单项目编号)来设置启动菜单中的下次默认启动选项。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SDCARD"; ObjectID = "sti-pn-v4l"; */
"sti-pn-v4l.title" = "允许扫描读卡器设备";

/* Class = "NSButtonCell"; title = "AppleDebug"; ObjectID = "tBp-D4-d9x"; */
"tBp-D4-d9x.title" = "AppleDebug";

/* Class = "NSButtonCell"; title = "AuthRestart"; ObjectID = "tI2-d3-co4"; */
"tI2-d3-co4.title" = "AuthRestart";

/* Class = "NSButtonCell"; title = "Provides custom icons for boot entries"; ObjectID = "tLD-8o-zGU"; */
"tLD-8o-zGU.title" = "为引导项提供自定义图标";

//* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0x6\nDescription: Sensitive data exposure bitmask (sum) to operating system.\n• 0x01 — Expose printable booter path as an UEFI variable.\n• 0x02 — Expose OpenCore version as an UEFI variable.\n• 0x04 — Expose OpenCore version in boot picker menu title.\n• 0x08 — Expose OEM information as a set of UEFI variables.\nExposed booter path points to OpenCore.efi or its booter depending on the load order. \n\nTo obtain booter path use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path\n\nTo use booter path for mounting booter volume use the following command in macOS:\nu=$(nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path | sed 's/.*GPT,\\([^,]*\\),.*/\\1/'); \\ if [ \"$u\" != \"\" ]; then sudo diskutil mount $u ; fi\n\nTo obtain OpenCore version use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-version\n\nTo obtain OEM information use the following commands in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-product # SMBIOS Type1 ProductName\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-vendor # SMBIOS Type2 Manufacturer\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-board # SMBIOS Type2 ProductName"; ObjectID = "tmf-fU-Pjy"; */
"tmf-fU-Pjy.ibShadowedToolTip" = "3 - 将 OpenCore 的启动路径和版本储存进 NVRAM\n11 - 在 3 的基础上添加主板 OEM 信息, HWMonitorSMC2 和 NVMeFix 需要主板 OEM 信息才能正常工作\n6 - 如果要在引导菜单显示OC版本号，填6\n15 - 暴露所有NVRAM信息。";

/* Class = "NSTableColumn"; headerCell.title = "Comment"; ObjectID = "uSO-ne-MBg"; */
"uSO-ne-MBg.headerCell.title" = "说明";

/* Class = "NSButtonCell"; title = "Enable logging, otherwise all log is discarded"; ObjectID = "uWH-Lw-aeI"; */
"uWH-Lw-aeI.title" = "启用日志记录，否则所有日志将被丢弃";

/* Class = "NSTabViewItem"; label = "Entries"; ObjectID = "uks-Bw-Ph4"; */
"uks-Bw-Ph4.label" = "Entries-自定义条目";

/* Class = "NSTabViewItem"; label = "BlessOverride"; ObjectID = "uyb-X6-nFt"; */
"uyb-X6-nFt.label" = "BlessOverride-设置自定义启动项绝对路径";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable modifier hotkey handling in boot picker.\nIn addition to action hotkeys, which are partially described in UsePicker section and are normally handled by Apple BDS, there exist modifier keys, which are handled by operating system bootloader, namely boot.efi. These keys allow to change operating system behaviour by providing different boot modes.\nOn some firmwares it may be problematic to use modifier keys due to driver incompatibilities. To workaround this problem this option allows registering select hotkeys in a more permissive manner from within boot picker. Such extensions include the support of tapping on keys in addition to holding and pressing Shift along with other keys instead of just Shift alone, which is not detectible on many PS/2 keyboards. This list of known modifier hotkeys includes:\n• CMD+C+MINUS — disable board compatibility checking.\n• CMD+K — boot release kernel, similar to kcsuffix=release.\n• CMD+S — single user mode.\n• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.\n• CMD+V — verbose mode.\n• Shift — safe mode."; ObjectID = "vvg-w7-KxC"; */
"vvg-w7-KxC.ibShadowedToolTip" = "是否开启一些热键功能，包括Cmd+K;Cmd+S。\n设置为YES后允许在引导过程中使用苹果原生快捷键, 需要与Quirk选项中KeySupport=Yes或UsbKbDxe.efi结合使用, 具体体验取决于主板固件。常用快捷键组合:\nCmd + V: 启用 -v 跑码啰嗦模式\nCmd + Opt + P + R: 重置 NVRAM\nCmd + R: 启动恢复分区\nCmd + S: 启动至单用户模式\nOption/ALT: 在ShowPicker设置成NO时显示引导菜单, ALT键不可用时可用ESC键代替(狂按ESC键)。\n如果你开机发现键盘无法选择，请选NO，并且删除OC/Drivers下的UsbKbDxe.efi 。";

/* Class = "NSTableColumn"; headerCell.title = "Arguments"; ObjectID = "wFf-6v-O3P"; */
"wFf-6v-O3P.headerCell.title" = "参数";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: None\nDescription: Hibernation detection mode. The following modes are supported:\n• None — Avoid hibernation for your own good.\n• Auto — Use RTC and NVRAM detection.\n• RTC — Use RTC detection.\n• NVRAM — Use NVRAM detection."; ObjectID = "wPi-6s-R0s"; */
"wPi-6s-R0s.ibShadowedToolTip" = "检测休眠模式。我们的机器一般都不支持休眠，选none。如果你的主板支持原生nvram、并想测试休眠，可以考虑填auto。\n与系统内的休眠模式配合, 引导进系统会还原休眠前的状态, 这个可能功能会影响SSD寿命, 建议关闭！";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: None\nDescription: Attempt to provide bootloader persistence.\nValid values:\n• None — do nothing.\n• Bootstrap — create or update top-priority \\EFI\\OC\\Bootstrap\\Bootstrap.efi boot option (Boot9696) in UEFI variable storage at bootloader startup. For this option to work RequestBootVarRouting is required to be enabled.\nThis option provides integration with third-party operating system installation and upgrade at the times they overwrite \\EFI\\BOOT\\BOOTx64.efi file. By creating a custom option in Bootstrap mode this file path becomes no longer used for bootstraping OpenCore.\n\nNote 1: Some firmewares may have broken NVRAM, no boot option support, or various other incompatibilities of any kind. While unlikely, the use of this option may even cause boot failure. Use at your own risk on boards known to be compatible.\n\nNote 2: Be warned that while NVRAM reset executed from OpenCore should not erase the boot option created in Bootstrap, executing NVRAM reset prior to loading OpenCore will remove it."; ObjectID = "xNT-zI-wd8"; */
"xNT-zI-wd8.ibShadowedToolTip" = "尝试提供引导加载程序的持久性。\n有效值:\n• None — 什么也不做\n• Bootstrap — 在引导加载程序启动时，在UEFI变量存储中创建或更新优先级最高的 \\EFI\\OC\\Bootstrap\\Bootstrap.efi引导选项(Boot9696)。 为了使此选项起作用，需要启用RequestBootVarRouting。\n此选项在覆盖 \\EFI\\BOOT\\BOOTx64.efi 文件时提供与第三方操作系统安装和升级的集成。 通过在Bootstrap模式下创建自定义选项，此文件路径将不再用于引导OpenCore。\n\n注意 1: 某些固件可能损坏NVRAM，不提供启动选项支持或任何其他各种不兼容性。虽然不太可能，但使用此选项甚至可能导致引导失败。 在已知兼容的电路板上使用，后果自负。\n\n注意 2: 请注意，重置NVRAM还会擦除在Bootstrap模式下创建的引导选项。";

/* Class = "NSTextFieldCell"; title = "TakeoffDelay"; ObjectID = "yDl-hK-Eml"; */
"yDl-hK-Eml.title" = "TakeoffDelay\n激活快捷键延迟";

/* Class = "NSButtonCell"; title = "OC_SCAN_DEVICE_LOCK"; ObjectID = "yNo-gi-9zr"; */
"yNo-gi-9zr.title" = "扫描已知设备类型";

/* Class = "NSTableColumn"; headerCell.title = "Auxiliary"; ObjectID = "yTI-cV-qsU"; */
"yTI-cV-qsU.headerCell.title" = "辅助";

/* Class = "NSButtonCell"; title = "ApplePanic"; ObjectID = "yaU-Lw-vco"; */
"yaU-Lw-vco.title" = "ApplePanic";

/* Class = "NSButtonCell"; title = "Expose printable booter path as an UEFI variable."; ObjectID = "z6D-gM-UDa"; */
"z6D-gM-UDa.title" = "将可打印的引导程序路径公开为UEFI变量.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_HFS"; ObjectID = "zCH-tB-ca6"; */
"zCH-tB-ca6.title" = "允许扫描HFS文件系统";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Hides auxiliary entries from picker menu by default. \nAn entry is considered auxiliary when at least one of the following applies:\n• Entry is macOS recovery.\n• Entry is macOS Time Machine.\n• Entry is explicitly marked as Auxiliary.\n• Entry is system (e.g. Clean NVRAM).\n\nTo see all entries picker menu needs to be reloaded in extended mode by pressing Spacebar key. Hiding auxiliary \nentries may increase boot performance for multidisk systems."; ObjectID = "zgV-bT-EgH"; */
"zgV-bT-EgH.ibShadowedToolTip" = "隐藏选择器菜单中的辅助条目,如果启用隐藏默认条目，选为YES。\n至少满足以下条件之一时，该条目被认为是辅助条目:\n•条目是macOS Recovery。\n•条目被明确标记为辅助。\n•条目是一个efi程序(例如Clean NVRAM)\n\n通过按空格键，重新加载所有条目选择器菜单。";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SASEX"; ObjectID = "zj4-Hs-Xjk"; */
"zj4-Hs-Xjk.title" = "允许扫描SAS和Mac NVMe设备";

/* Class = "NSButtonCell"; title = "DEBUG_ERROR in DEBUG, NOOPT, RELEASE"; ObjectID = "zlC-gM-dIj"; */
"zlC-gM-dIj.title" = "DEBUG，NOOPT和RELEASE中的DEBUG_ERROR";