@@ -18,7 +18,7 @@ The Name Server serves as the provider of routing service. The producer or the c
## 7 Pull Consumer
A type of Consumer, the application pulls messages from brokers by actively invoking the consumer pull message method, and the application has the advantages of controlling the timing and frequency of pulling messages. Once the batch of messages is pulled, user application will initiate consuming process.
## 8 Push Consumer
A type of Consumer. Under this high real-time performance mode, it will push the message to the consumer actively when the Broker receives the data.
A type of Consumer, Under this high real-time performance mode, it will push the message to the consumer actively when the Broker receives the data.
## 9 Producer Group
A collection of the same type of Producer, which sends the same type of messages with consistent logic. If a transaction message is sent and the original producer crashes after sending, the broker server will contact other producers in the same producer group to commit or rollback the transactional message.
This is the simplest but also the riskiest mode, that makes the entire service unavailable once the broker restarts or goes down. Production environments are not recommended, but can be used for local testing and development. Here are the steps to build.
This is the simplest, but also the riskiest mode, that makes the entire service unavailable once the broker restarts or goes down. Production environments are not recommended, but can be used for local testing and development. Here are the steps to build.
The boot command shown above is used in the case of a single NameServer.For clusters of multiple NameServer, the address list after the -n argument in the broker boot command is separated by semicolons, for example, 192.168.1.1: 9876;192.161.2: 9876.
The boot command shown above is used in the case of a single NameServer.For clusters of multiple NameServer, the address list after the -n argument in the broker boot command is separated by semicolons, for example, 192.168.1.1: 9876;192.161.2: 9876.
### 3 Multiple Master And Multiple Slave Mode-Asynchronous replication
@@ -5,7 +5,7 @@ Message publication refers to that a producer sends messages to a topic; Message
## 2 Message Ordering
Message ordering refers to that a group of messages can be consumed orderly as they are published. For example, an order generates three messages: order creation, order payment, and order completion. It only makes sense to consume them in their generated order, but orders can be consumed in parallel at the same time. RocketMQ can strictly guarantee these messages are in order.
Orderly message are divided into global orderly message and partitioned orderly message. Global order means that all messages under a certain topic must be in order, partitioned order only requires each group of messages are consumed orderly.
Orderly message is divided into global orderly message and partitioned orderly message. Global order means that all messages under a certain topic must be in order, partitioned order only requires each group of messages are consumed orderly.
- Global message ordering:
For a given Topic, all messages are published and consumed in strict first-in-first-out (FIFO) order.
Applicable scenario: the performance requirement is not high, and all messages are published and consumed according to FIFO principle strictly.
...
...
@@ -14,7 +14,7 @@ For a given Topic, all messages are partitioned according to sharding key. Messa
Applicable scenario: high performance requirement, with sharding key as the partition field, messages within the same partition are published and consumed according to FIFO principle strictly.
## 3 Message Filter
Consumers of RocketMQ can filter messages based on tags as well as support for user-defined attribute filtering. Message filter is currently implemented on the Broker side, with the advantage of reducing the network transmission of useless messages for Consumer and the disadvantage of increasing the burden on the Broker and relatively complex implementation.
Consumers of RocketMQ can filter messages based on tags as well as supporting for user-defined attribute filtering. Message filter is currently implemented on the Broker side, with the advantage of reducing the network transmission of useless messages for Consumer and the disadvantage of increasing the burden on the Broker and relatively complex implementation.
## 4 Message Reliability
RocketMQ supports high reliability of messages in several situations:
...
...
@@ -25,22 +25,22 @@ RocketMQ supports high reliability of messages in several situations:
5 The machine cannot be started up (the CPU, motherboard, memory and other key equipment may be damaged)
6 Disk equipment damaged
In the four cases of 1), 2), 3), and 4) where the hardware resource can be recovered immediately, RocketMQ guarantees that the message will not be lost or a small amount of data will be lost (depending on whether the flush disk type is synchronous or asynchronous)
In the four cases of 1), 2), 3), and 4) where the hardware resource can be recovered immediately, RocketMQ guarantees that the message will not be lost or a small amount of data will be lost (depending on whether the flush disk type is synchronous or asynchronous).
5) and 6) are single point of failure and cannot be recovered. Once it happens, all messages on the single point will be lost. In both cases, RocketMQ ensures that 99% of the messages are not lost through asynchronous replication, but a very few number of messages may still be lost. Synchronous double write mode can completely avoid single point of failure, which will surely affect the performance and suitable for the occasion of high demand for message reliability, such as money related applications. Note: RocketMQ supports synchronous double writes since version 3.0.
5) and 6) are single point of failure and cannot be recovered. Once it happens, all messages on the single point will be lost. In both cases, RocketMQ ensures that 99% of the messages are not lost through asynchronous replication, but a very few number of messages may still be lost. Synchronous double write mode can completely avoid single point of failure, which will surely affect the performance and suitable for the occasion of high demand for message reliability, such as money related applications. Note: RocketMQ supports synchronous double writes since version 3.0.
## 5 At Least Once
At least Once refers to that every message will be delivered at least once. RocketMQ supports this feature because the Consumer pulls the message locally and does not send an ack back to the server until it has consumed it.
## 6 Backtracking Consumption
Backtracking consumption refers to that the Consumer has consumed the message successfully, but the business needs to consume again. To support this function, the message still needs to be retained after the Broker sends the message to the Consumer successfully. The re-consumption is normally based on time dimension. For example, after the recovery of the Consumer system failure, the data one hour ago needs to be re-consumed, then the Broker needs to provide a mechanism to reverse the consumption progress according to the time dimension. RocketMQ supports backtracking consumption by time trace, with the time dimension down to milliseconds.
Backtracking consumption refers to that the Consumer has consumed the message successfully, but the business needs to consume again. To support this function, the message still needs to be retained after the Broker sends the message to the Consumer successfully. The re-consumption is normally based on time dimension. For example, after the recovery of the Consumer system failured, the data one hour ago needs to be re-consumed, then the Broker needs to provide a mechanism to reverse the consumption progress according to the time dimension. RocketMQ supports backtracking consumption by time trace, with the time dimension down to milliseconds.
## 7 Transactional Message
RocketMQ transactional message refers to the fact that the application of a local transaction and the sending of a Message operation can be defined in a global transaction which means both succeed or fail simultaneously. RocketMQ transactional message provides distributed transaction functionality similar to X/Open XA, enabling the ultimate consistency of distributed transactions through transactional message.
RocketMQ transactional message refers to the fact that the application of a local transaction and the sending of a Message operation can be defined in a global transaction which means both succeed or failed simultaneously. RocketMQ transactional message provides distributed transaction functionality similar to X/Open XA, enabling the ultimate consistency of distributed transactions through transactional message.
## 8 Scheduled Message
Scheduled message(delay queue) refers to that messages are not consumed immediately after they are sent to the broker, but waiting to be delivered to the real topic after a specific time.
The broker has a configuration item, messageDelayLevel, with default values “1s 5s 10s 30s 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 20m 30m 1h 2h”, 18 levels. Users can configure a custom messageDelayLevel. Note that messageDelayLevel is a broker's property rather than a topic's. When sending a message, just set the delayLevel level: msg.setDelayLevel(level). There are three types of levels:
Scheduled message(delay queue) refers to that messages are not consumed immediately after they are sent to the broker, but waiting to be delivered to the real topic after a specific time.
The broker has a configuration item, `messageDelayLevel`, with default values “1s 5s 10s 30s 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 20m 30m 1h 2h”, 18 levels. Users can configure a custom `messageDelayLevel`. Note that `messageDelayLevel` is a broker's property rather than a topic's. When sending a message, just set the delayLevel level: msg.setDelayLevel(level). There are three types of levels:
- level == 0, The message is not a delayed message
- 1<=level<=maxLevel, Message delay specific time, such as level==1, delay for 1s
...
...
@@ -52,24 +52,24 @@ Note that Scheduled messages are counted both the first time they are written an
## 9 Message Retry
When the Consumer fails to consume the message, a retry mechanism is needed to make the message to be consumed again. Consumer's consume failure can usually be classified as follows:
-due to the reasons of the message itself, such as deserialization failure, the message data itself cannot be processed (for example, the phone number of the current message is cancelled and cannot be charged), etc. This kind of error usually requires skipping this message and consuming others since immediately retry would be failed 99%, so it is better to provide a timed retry mechanism that retries after 10 seconds.
-due to the reasons of dependent downstream application services are not available, such as db connection is not usable, perimeter network is not unreachable, etc. When this kind of error is encountered, consuming other messages will also result in an error even if the current failed message is skipped. In this case, it is recommended to sleep for 30s before consuming the next message, which will reduce the pressure on the broker to retry the message.
-Due to the reasons of the message itself, such as deserialization failure, the message data itself cannot be processed (for example, the phone number of the current message is cancelled and cannot be charged), etc. This kind of error usually requires skipping this message and consuming others since immediately retry would be failed 99%, so it is better to provide a timed retry mechanism that retries after 10 seconds.
-Due to the reasons of dependent downstream application services are not available, such as db connection is not usable, perimeter network is not unreachable, etc. When this kind of error is encountered, consuming other messages will also result in an error even if the current failed message is skipped. In this case, it is recommended to sleep for 30s before consuming the next message, which will reduce the pressure on the broker to retry the message.
RocketMQ will set up a retry queue named “%RETRY%+consumerGroup” for each consumer group(Note that the retry queue for this topic is for consumer groups, not for each topic) to temporarily save messages cannot be consumed by customer due to all kinds of reasons. Considering that it takes some time for the exception to recover, multiple retry levels are set for the retry queue, and each retry level has a corresponding re-deliver delay. The more retries, the greater the deliver delay. RocketMQ first save retry messages to the delay queue which topic is named “SCHEDULE_TOPIC_XXXX”, then background schedule task will save the messages to “%RETRY%+consumerGroup” retry queue according to their corresponding delay.
RocketMQ will set up a retry queue named “%RETRY%+consumerGroup” for each consumer group(Note that the retry queue for this topic is for consumer groups, not for each topic) to temporarily save messages cannot be consumed by customer due to all kinds of reasons. Considering that it takes some time for the exception to recover, multiple retry levels are set for the retry queue, and each retry level has a corresponding re-deliver delay. The more retries, the greater the deliver delay. RocketMQ first save retry messages to the delay queue which topic is named “SCHEDULE_TOPIC_XXXX”, then background schedule task will save the messages to “%RETRY%+consumerGroup” retry queue according to their corresponding delay.
## 10 Message Resend
When a producer sends a message, the synchronous message will be resent if fails, the asynchronous message will retry and oneway message is without any guarantee. Message resend ensures that messages are sent successfully and without lost as much as possible, but it can lead to message duplication, which is an unavoidable problem in RocketMQ. Under normal circumstances, message duplication will not occur, but when there is a large number of messages and network jitter, message duplication will be a high-probability event. In addition, producer initiative messages resend and the consumer load changes will also result in duplicate messages. The message retry policy can be set as follows:
-retryTimesWhenSendFailed: Synchronous message retry times when send failed, default value is 2, so the producer will try to send retryTimesWhenSendFailed + 1 times at most. To ensure that the message is not lost, producer will try sending the message to another broker instead of selecting the broker that failed last time. An exception will be thrown if it reaches the retry limit, and the client should guarantee that the message will not be lost. Messages will resend when RemotingException, MQClientException, and partial MQBrokerException occur.
-retryTimesWhenSendAsyncFailed: Asynchronous message retry times when send failed, asynchronous retry sends message to the same broker instead of selecting another one and does not guarantee that the message wont lost.
-retryAnotherBrokerWhenNotStoreOK: Message flush disk (master or slave) timeout or slave not available (return status is not SEND_OK), whether to try to send to another broker, default value is false. Very important messages can set to true.
-`retryTimesWhenSendFailed`: Synchronous message retry times when send failed, default value is 2, so the producer will try to send `retryTimesWhenSendFailed` + 1 times at most. To ensure that the message is not lost, producer will try sending the message to another broker instead of selecting the broker that failed last time. An exception will be thrown if it reaches the retry limit, and the client should guarantee that the message will not be lost. Messages will resend when RemotingException, MQClientException, and partial MQBrokerException occur.
-`retryTimesWhenSendAsyncFailed`: Asynchronous message retry times when send failed, asynchronous retry sends message to the same broker instead of selecting another one and does not guarantee that the message wont lost.
-`retryAnotherBrokerWhenNotStoreOK`: Message flush disk (master or slave) timeout or slave not available (return status is not SEND_OK), whether to try to send to another broker, default value is false. Very important messages can set to true.
## 11 Flow Control
Producer flow control, because broker processing capacity reaches a bottleneck; Consumer flow control, because the consumption capacity reaches a bottleneck.
Producer flow control:
- When commitLog file locked time exceeds osPageCacheBusyTimeOutMills, default value of osPageCacheBusyTimeOutMills is 1000 ms, then return flow control.
- If transientStorePoolEnable == true, and the broker is asynchronous flush disk type, and resources are insufficient in the transientStorePool, reject the current send request and return flow control.
- When commitLog file locked time exceeds osPageCacheBusyTimeOutMills, default value of `osPageCacheBusyTimeOutMills` is 1000 ms, then return flow control.
- If `transientStorePoolEnable` == true, and the broker is asynchronous flush disk type, and resources are insufficient in the transientStorePool, reject the current send request and return flow control.
- The broker checks the head request wait time of the send request queue every 10ms. If the wait time exceeds waitTimeMillsInSendQueue, which default value is 200ms, the current send request is rejected and the flow control is returned.
- The broker implements flow control by rejecting send requests.
