- 12 5月, 2014 7 次提交
-
-
由 Dmitry Kozlov 提交于
By default list of IP address is serial at startup. This option shuffles initial IP list so it becomes more random.
-
由 Dmitry Kozlov 提交于
-
由 Dmitry Kozlov 提交于
-
由 Dmitry Kozlov 提交于
This new option will control how to represent Called-Station-ID. Its value maybe ifname,mac or ifname:mac. By default mac is used to keep compatibility with old versions. Also old option ifname-in-sid is removed from documentation, but is still supported for compatibility.
-
由 Dmitry Kozlov 提交于
-
由 Dmitry Kozlov 提交于
There is no need to keep auth request structure in memory during whole session life time. It wastes memory and file descriptors
-
由 Dmitry Kozlov 提交于
-
- 08 5月, 2014 1 次提交
-
-
由 Dmitry Kozlov 提交于
* major l2tp rewrite * introduced ipoe (ipv4 only) module
-
- 30 4月, 2014 2 次提交
-
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
- 29 4月, 2014 5 次提交
-
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Guillaume Nault 提交于
Use unshare(CLONE_FILES) to create a local file descriptors namespace for the SNMP thread. This is similar to what was done in bf5340 'net-snmp: run snmp in "special" thread', but without calling clone() directly. So the net-snmp plugin keeps running in a regular pthread. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
This reverts commit bf534029. snmp_thread() needs to be run as regular thread to allow Valgrind analysis. Using a different namespace for file desciptors will be done later on using unshare(). Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
- 24 4月, 2014 1 次提交
-
-
由 Dmitry Kozlov 提交于
-
- 21 4月, 2014 2 次提交
-
-
-
由 Dmitry Kozlov 提交于
-
- 14 4月, 2014 2 次提交
-
-
-
由 Guillaume Nault 提交于
If accel-ppp is compiled with RADIUS support, but run without using it, then pd->tmp_fname is NULL. This patch verifies that pd->tmp_fname is valid before renaming the radattr file. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
- 11 4月, 2014 20 次提交
-
-
由 Dmitry Kozlov 提交于
ipoe: early allocate interface for shared vlans (prevents different values of NAS-Port in Access-Request and Account-Request) Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Dmitry Kozlov 提交于
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Dmitry Kozlov 提交于
NET-SNMP is built on top of stale file descriptor multiplexing mechanism (select) which prevents to use descriptors with number >= 1024. Due to accel-ppp uses a lots of descriptors NET-SNMP easy overflows this limit and fails and even may crash whole accel-ppp process. This patch runs snmp in special thread which does not share file descritor table with main process, so it can use less descriptors and live in __FD_SETSIZE limit. Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
-
由 Guillaume Nault 提交于
Wait for a full retransmission cycle after reception of a StopCCN. Introduce STATE_FIN_WAIT to identify tunnels which have received a StopCCN but are waiting for the disconnection timer to expire. A tunnel can go from STATE_FIN (i.e. StopCCN has been sent, waiting for acknowledgement) to STATE_FIN_WAIT (i.e. StopCCN has been received, waiting for full retransmission cycle), but not the other way around. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
* Set default retransmission timeout to 1 second. Since we now have exponential backoff, we can afford a smaller value. * Add the rtimeout-cap option to set the maximum value the retransmission timer has to respect during exponential backoff. * Store the maximun number of retransmissions in tunnel's structure (like other retransmission parameters). * Describe all these changes in man page and reset them to their default values if they're removed from configuration file before a reload. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Rework the l2tp_rtimeout() callback, so that time between retransmissions expands exponentially. This allows for faster retransmissions without without overwhelming the peer. A cap is set on the maximum retransmission time. For now it is set to 16 seconds. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
If a peer needs to disconnect a session for which it didn't receive any reply, it sends a CDN with no Session ID. In this case, the Assigned Session ID AVP is the only data that can be used to find out which session has to be closed. Though it isn't supported for now, let's accept and ack these messages. Session will be deleted on our side thanks to the establishment timer. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Add the recv-window option in accel-ppp.conf. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Add a fixed length receive queue to tunnels and adverdise its length to the peer using the Receive Window Size AVP. Incoming message handling is modified as follow: -Read as much messages as possible and store them in the receive queue. Messages are stored in order, based on their sequence number. Messages not fitting into the queue are discarded (doesn't happen if peer respects our Receive Window AVP). This is the job of the new l2tp_tunnel_store_msg() function. It also automatically finds out if there are new messages to acknowledge. -Once all incoming messages have been read, free acknowledged packets from retransmission queue (based on the highest received acknowledgement number). -Then process messages in the receive queue. This is done by l2tp_tunnel_reply(). Each packet is processed by l2tp_{tunnel,session}_recv() (or dropped in some particular cases). The send queue is then pushed. If there's no message in the send queue and an acknowledgement is necessary, a ZLB is sent instead. -Finally, detect if the peer has acknowledged a StopCCN. There are three components to this test: -Have we tried to send a StopCCN? Check with tunnel's state. -Has the StopCCN been pushed on the network? Check with tunnel's send queue. -Has the peer acknowledged the StopCCN? Check with tunnel's retransmission queue. For now, l2tp_tunnel_store_msg() doesn't perform fast retransmissions. So l2tp_retransmit() is removed. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Use stacked error labels for better extensibility. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Refuse to create new sessions when the local send queue is bigger than the peer's receive window (i.e. when there are already more outstanding messages than what the peer can currently accept). Only sessions initiated locally are affected, session requests from the peer are still handled normally. This avoids adding useless presure on the sending window when many sessions are created locally. If sessions were created, they'd add many ICRQ or OCRQ messages in the send queue and we'd have to wait for all these messages to be sent before being able to reply to messages from the peer. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Store the Receive Window Size AVP sent by peer and respect it when sending messages. That is, stop sending messages from send queue once the number of unacknowledged messages is higher than peer's receive window. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Add a per session send queue. Messages sent by a session are added to both tunnel and session queues. This allows sessions to remove their unsent messages from tunnel's send queue before they disconnect. The same approach is used for tunnels. Before disconnecting, they clear their send queue to avoid sending useless messages. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Modify return value of l2tp_tunnel_push_sendqueue() to inform the caller if a message has been sent or if the queue was empty. This information, let l2tp_conn_read() automatically acknowledge received messages using a ZLB when there's no response to send. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Stop checking for l2tp_{tunnel,session}_send() return values. These functions now always succeed, unless the session or tunnel is closing (in which case packet is automatically dropped and caller doesn't need to take any special action). Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Don't send messages immediately, store them in conn->send_queue instead, so we have control over how many and when messages are sent on the network. Once a message is sent, it's removed from the send queue and added to the retransmission queue. Retransmission queue is automatically updated based on acknowledgements received from peer. For now, packets in the send queue are pushed on the network after each incoming packet processing. So functions called by l2tp_conn_read() don't have to call l2tp_tunnel_push_sendqueue(). Other functions (e.g. triton callbacks) have to manually push packets out of the send queue. The same applies for disconnection. The l2tp_tunnel_disconnect_push() and l2tp_session_disconnect_push() functions have been defined for use in functions that don't call l2tp_tunnel_push_sendqueue() automatically. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Remove message type switch from l2tp_conn_read(). Define l2tp_tunnel_recv() instead to handle tunnel specific messages. The Session ID field in L2TP control messages is used to determine if packet is tunnel or session oriented. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Let l2tp_tunnel_disconnect() delete the tunnel when an error occurs. Return an int to indicate if conn has been deleted. Most callers are compatible with this new behaviour, either because they never use the tunnel after disconnection or because they hold a reference on the tunnel. A few callers need to be adapted though: -l2tp_conn_close() calls l2tp_tunnel_disconnect() to properly inform the peer of tunnel disconnection. But it also deletes the tunnel immediately, no matter if StopCCN message was sent or not. Since l2tp_conn_close() doesn't hold a reference on the tunnel, care must be taken not to access the tunnel if it was deleted by l2tp_tunnel_disconnect(). Since immediate deletion isn't required, the l2tp_tunnel_free() call is simply removed. The normal disconnection process is now followed, with detection and retransmission of lost messages, acknowledgment handling, etc. -situation is similar for l2tp_tunnel_timeout() and handled in the same way. This patch also deletes tunnel's sessions, as well as the establishment and hello timers. These are of no use once the tunnel enters the disconnection process. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Now that l2tp_tunnel_free() can be called directly inside the main reception loop, let l2tp_recv_StopCCN() delete the tunnel itself. This avoids special handling in l2tp_conn_read(). Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-
由 Guillaume Nault 提交于
Let functions launched by l2tp_conn_read() delete the tunnel. This is done by taking a reference on conn to ensure it'll remain a valid tunnel, even after calling l2tp_tunnel_free(conn). l2tp_conn_read() now detects if conn got deleted, so that we know if the tunnel still holds a reference to itself. If it doesn't, tunnel_put() may free the tunnel and thus the triton handler we're running from. So we have to return -1 in this case. l2tp_tunnel_free() also needs to be modified: it can't safely close conn->hnd.fd anymore. Since l2tp_conn_read() relies on conn->hnd.fd being a valid file descriptor, closing it inside the reception loop would break this assumption in next iteration. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
-