1.7.0 release

* implemented per CTRL mppe config
* implemented vendor/attr options to specify which radius attribute containes ip pool name
* implemented adaptive lcp echo functionality
* implemented leaf qdisc attachment (only sfq at present)
* implemented Challenge attribute handling (l2tp)
* implemented unit(interface) cache
* fixed ip-pre-up script result handling
* fixed time range start detection on startup/config reload
* fixed reading of req-limit option (radius)
* fixed unexpected radattr file removal

README

@@ -21,7 +21,7 @@ Features
 11. Extensible user/password database, implemented Radius, pppd compatible chap-secrets sources
 12. Extensible IP pool, implemented Radius, chap-secrets and static pools
 13. Supported pppd compatible ip-up/ip-down scripts
-14. Builtin tbf shaper manager
+14. Builtin tbf/htb shaper manager
 15. Command line interface via telnet
 16. SNMP support (master or subagent via AgentX)
 
@@ -66,23 +66,23 @@ read man accel-ppp.conf
 
 Built-in shaper
 --------------
-accel-ppp supports tbf based shaper manager.
-To enable it uncomment shaper_tbf in [modules] section.
+accel-ppp supports tbf and htb based shaper manager.
+To enable it uncomment shaper in [modules] section.
 It accepts radius attributes in various formats: rate, down-rate/up-rate and cisco-like. Values have to be in kilobits except cisco-like.
 For example:
 Filter-Id=1000 (means 1000Kbit both up-stream and down-stream rate)
 Filter-Id=2000/3000 (means 2000Kbit down-stream rate and 3000Kbit up-stream rate)
 To change radius attribute which containes rate information use 'attr' option, for example:
-[tbf]
+[shaper]
 attr=My-Custom-Rate-Attribute
 of course this attribute have to be in radius dictionary.
 To specify different attributes for down-stream and up-stream rates use 'attr-down' and 'attr-up' options, for example:
-[tbf]
+[shaper]
 attr-down=PPPD-Downstream-Speed
 attr-up=PPPD-Upstream-Speed
 
 If you want to use cisco-like format configure accel-ppp as following:
-[tbf]
+[shaper]
 vendor=Cisco
 attr=Cisco-AVPair
 and send two attributes:
@@ -95,15 +95,15 @@ Advanced shaper using
 1. Burst configuration.
 If you not using cisco-like format then burst calculates from rate and specified burst factors.
 To specify burst factors use 'down-burst-factor' and 'up-burst-factor' options, for example:
-[tbf]
+[shaper]
 down-burst-factor=1.0
 up-burst-factor=10.0
-which means that burst for tbf qdisc will be calculated as down-stream rate multiply to 1.0 and burst for policer will be calculated as up-stream rate multiply to 10.0.
+which means that burst for tbf/htb qdisc will be calculated as down-stream rate multiply to 1.0 and burst for policer/htb will be calculated as up-stream rate multiply to 10.0.
 
 2. Time ranges.
 You can specify time ranges to authomatic rate reconfiguration.
 To specify time ranges use following sample configuration:
-[tbf]
+[shaper]
 time-range=1,1:00-3:00
 time-range=2,3:00-5:00
 time-range=3,5:00-7:00
@@ -162,14 +162,9 @@ Warning !!!
    of pptpd exists.
 
 
-Thanks
-------
-Thanks to Kirill Yushkov for debug support and donations.
-
-
 Contacts
 --------
-http://accel-pptp.sourceforge.net/
+http://accel-ppp.sourceforge.net/
 mail: xeb@mail.ru
 ICQ: 337258064
 Jabber: xeb@xeb.homelinux.net

accel-pppd/CMakeLists.txt

@@ -10,7 +10,7 @@ IF (EXISTS ${CMAKE_HOME_DIRECTORY}/.git AND NOT DEFINED IGNORE_GIT)
 	)
 	STRING(STRIP ${ACCEL_PPP_VERSION} ACCEL_PPP_VERSION)
 ELSE (EXISTS ${CMAKE_HOME_DIRECTORY}/.git AND NOT DEFINED IGNORE_GIT)
-	SET (ACCEL_PPP_VERSION 1.6.1)
+	SET (ACCEL_PPP_VERSION 1.7.0)
 ENDIF (EXISTS ${CMAKE_HOME_DIRECTORY}/.git AND NOT DEFINED IGNORE_GIT)
 
 ADD_DEFINITIONS(-DACCEL_PPP_VERSION="${ACCEL_PPP_VERSION}")

cmake/cpack.cmake

 INCLUDE(InstallRequiredSystemLibraries)
 
 SET(CPACK_PACKAGE_VERSION_MAJOR "1")
-SET(CPACK_PACKAGE_VERSION_MINOR "6")
-SET(CPACK_PACKAGE_VERSION_PATCH "1")
+SET(CPACK_PACKAGE_VERSION_MINOR "7")
+SET(CPACK_PACKAGE_VERSION_PATCH "0")
 
 SET(CPACK_PACKAGE_NAME "accel-ppp")
 SET(CPACK_PACKAGE_CONTACT "Dmitry Kozlov <xeb@mail.ru>")
@@ -18,7 +18,7 @@ IF(CPACK_TYPE STREQUAL Debian5)
 ENDIF(CPACK_TYPE STREQUAL Debian5)
 
 IF(CPACK_TYPE STREQUAL Debian6)
-	SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= 2.11.2), libssl0.9.8 (>= 0.9.8), libpcre3 (>= 8.02), libnl2 (>= 1.99)")
+	SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= 2.11.2), libssl0.9.8 (>= 0.9.8), libpcre3 (>= 8.02)")
 	INCLUDE(${CMAKE_HOME_DIRECTORY}/cmake/debian/debian.cmake)
 ENDIF(CPACK_TYPE STREQUAL Debian6)