Skip to content

R
rt-thread

k3s / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 e49140b5 编写于 作者: S shandianchengzi 提交者： GitHub
浏览文件
操作

[HUST CSE IoTS&P Lab][bsp] add missing UL suffix to BIT macro to prevent undefined behavior (#7153) 

* [bsp] add missing UL suffix to BIT macro to prevent undefined behavior.

* [bsp] add UL suffix to BIT macro for consistency and readability.

* fix toUppercase.

* fix the abnormal character.

* format the file.
上级 3a9c5690
隐藏空白更改
内联 并排
Showing with 73 addition and 73 deletion
bsp/CME_M7/StdPeriph_Driver/inc/cmem7_usb.h
浏览文件 @ e49140b5
/**
*****************************************************************************
* @file cmem7_usb.h
*
* @brief CMEM7 USB header file
*
*
* @version V1.0
* @date 3. September 2013
*
* @note
*
*****************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
*****************************************************************************
*/
*****************************************************************************
* @file cmem7_usb.h
*
* @brief CMEM7 USB header file
*
*
* @version V1.0
* @date 3. September 2013
*
* @note
*
*****************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
*****************************************************************************
*/
#ifndef __CMEM7_USB_H
#define __CMEM7_USB_H
......@@ -38,19 +38,19 @@
/**
*
*/
#define SET_HCDMA_DESC_ADDR(a) (((uint32_t)(a)) >> 9)
#define MIN(a, b) (((a) <= (b)) ? (a) : (b))
#define MAX(a, b) (((a) >= (b)) ? (a) : (b))
#define BIT(b) (0x1u << (b))
#define SET_HCDMA_DESC_ADDR(a) (((uint32_t)(a)) >> 9)
#define MIN(a, b) (((a) <= (b)) ? (a) : (b))
#define MAX(a, b) (((a) >= (b)) ? (a) : (b))
#define BIT(b) (0x1U << (b))
/** @defgroup USB_HOST_PID
* @{
*/
#define USB_HOST_PID_DATA0 0x0 /*!< Indicates the Data PID is DATA0 */
#define USB_HOST_PID_DATA2 0x1 /*!< Indicates the Data PID is DATA2 */
#define USB_HOST_PID_DATA1 0x2 /*!< Indicates the Data PID is DATA1 */
#define USB_HOST_PID_MDATA 0x3 /*!< Indicates the Data PID is MDATA (non-control) */
#define USB_HOST_PID_SETUP 0x3 /*!< Indicates the Data PID is SETUP (control) */
#define USB_HOST_PID_DATA0 0x0 /*!< Indicates the Data PID is DATA0 */
#define USB_HOST_PID_DATA2 0x1 /*!< Indicates the Data PID is DATA2 */
#define USB_HOST_PID_DATA1 0x2 /*!< Indicates the Data PID is DATA1 */
#define USB_HOST_PID_MDATA 0x3 /*!< Indicates the Data PID is MDATA (non-control) */
#define USB_HOST_PID_SETUP 0x3 /*!< Indicates the Data PID is SETUP (control) */
/**
* @}
*/
......@@ -59,10 +59,10 @@
* @{
*/
typedef enum {
USB_EP_TYPE_CONTROL = 0x0, /*!< Control */
USB_EP_TYPE_ISO = 0x1, /*!< Isochronous */
USB_EP_TYPE_BULK = 0x2, /*!< Bulk */
USB_EP_TYPE_INT = 0x3, /*!< Interrupt */
USB_EP_TYPE_CONTROL = 0x0, /*!< Control */
USB_EP_TYPE_ISO = 0x1, /*!< Isochronous */
USB_EP_TYPE_BULK = 0x2, /*!< Bulk */
USB_EP_TYPE_INT = 0x3, /*!< Interrupt */
} USB_EP_TYPE;
/**
* @}
......@@ -72,10 +72,10 @@ typedef enum {
* @{
*/
typedef enum {
USB_ENUM_SPEED_HS = 0x0, /*!< Enumerated Speed is High Speed */
USB_ENUM_SPEED_FS = 0x1, /*!< Enumerated Speed is Full Speed */
USB_ENUM_SPEED_LS = 0x2, /*!< Enumerated Speed is Low Speed */
USB_ENUM_SPEED_FS_48M = 0x3, /*!< Enumerated Speed is Full Speed (PHY clock is running at 48MHz) */
USB_ENUM_SPEED_HS = 0x0, /*!< Enumerated Speed is High Speed */
USB_ENUM_SPEED_FS = 0x1, /*!< Enumerated Speed is Full Speed */
USB_ENUM_SPEED_LS = 0x2, /*!< Enumerated Speed is Low Speed */
USB_ENUM_SPEED_FS_48M = 0x3, /*!< Enumerated Speed is Full Speed (PHY clock is running at 48MHz) */
} USB_ENUM_SPEED;
/**
* @}
......@@ -85,15 +85,15 @@ typedef enum {
* @{
*/
typedef enum {
USB_INT_GP_HOST_DISC, /*!< Device disconnection interrupt (Only for HOST Mode) */
USB_INT_GP_DEV_RESET, /*!< USB Port Reset Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_ENUMDONE, /*!< Enumeration Done Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_SUSP, /*!< USB Suspend Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_EARLY, /*!< USB Idle Interrupt (Only for DEVICE Mode) */
USB_INT_GP_SOF, /*!< SOF Interrupt */
USB_INT_GP_MIS, /*!< USB access overstep the boundary Interrupt */
USB_INT_GP_IDCHG, /*!< OTG Connector ID Status Change Interrupt */
USB_INT_GP_SESSREQ, /*!< Session Request / Create Interrupt */
USB_INT_GP_HOST_DISC, /*!< Device disconnection interrupt (Only for HOST Mode) */
USB_INT_GP_DEV_RESET, /*!< USB Port Reset Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_ENUMDONE, /*!< Enumeration Done Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_SUSP, /*!< USB Suspend Interrupt (Only for DEVICE Mode) */
USB_INT_GP_DEV_EARLY, /*!< USB Idle Interrupt (Only for DEVICE Mode) */
USB_INT_GP_SOF, /*!< SOF Interrupt */
USB_INT_GP_MIS, /*!< USB access overstep the boundary Interrupt */
USB_INT_GP_IDCHG, /*!< OTG Connector ID Status Change Interrupt */
USB_INT_GP_SESSREQ, /*!< Session Request / Create Interrupt */
} USB_INT_GP;
/**
* @}
......@@ -103,11 +103,11 @@ typedef enum {
* @{
*/
typedef enum {
USB_INT_OTG_SESEND, /*!< Session End Interrupt */
USB_INT_OTG_STANDAUP, /*!< B Device timeout to connect Interrupt */
USB_INT_OTG_HNDETECT, /*!< Host Negotiation Detected Interrupt */
USB_INT_OTG_HNSUCCHG, /*!< Host Negotiation Success Status Change Interrupt */
USB_INT_OTG_KEEPAPP, /*!< Debounce Done Interrupt (Only for HOST Mode) */
USB_INT_OTG_SESEND, /*!< Session End Interrupt */
USB_INT_OTG_STANDAUP, /*!< B Device timeout to connect Interrupt */
USB_INT_OTG_HNDETECT, /*!< Host Negotiation Detected Interrupt */
USB_INT_OTG_HNSUCCHG, /*!< Host Negotiation Success Status Change Interrupt */
USB_INT_OTG_KEEPAPP, /*!< Debounce Done Interrupt (Only for HOST Mode) */
} USB_INT_OTG;
/**
* @}
......@@ -117,10 +117,10 @@ typedef enum {
* @{
*/
typedef enum {
USB_OTG_DEV_HNSUCC = 8, /*!< Host Negotiation Success (Only for DEVICE Mode, Read Only) */
USB_OTG_DEV_HNPREQ = 9, /*!< HNP Request (Only for DEVICE Mode) */
USB_OTG_HST_HNPENABLE = 10, /*!< Host Set HNP Enable (Only for HOST Mode) */
USB_OTG_DEV_HNPENABLE = 11, /*!< Device HNP Enabled (Only for DEVICE Mode) */
USB_OTG_DEV_HNSUCC = 8, /*!< Host Negotiation Success (Only for DEVICE Mode, Read Only) */
USB_OTG_DEV_HNPREQ = 9, /*!< HNP Request (Only for DEVICE Mode) */
USB_OTG_HST_HNPENABLE = 10, /*!< Host Set HNP Enable (Only for HOST Mode) */
USB_OTG_DEV_HNPENABLE = 11, /*!< Device HNP Enabled (Only for DEVICE Mode) */
} USB_OTG_CTL;
/**
......@@ -129,7 +129,7 @@ typedef enum {
typedef union {
__IO uint32_t HPRT; /*!< Host Port Control and Status Register */
struct {
__I uint32_t PCS : 1; /*!< If a device is attached to the port */
__IO uint32_t PCD : 1; /*!< A device connection is detected */
......@@ -212,7 +212,7 @@ void USB_EnableInt(BOOL enable);
/**
* @brief Flush TX/RX FIFO
* @param[in] num Flush FIFO£¬0: non-periodic TX FIFO (HOST Mode) or FIFO 0 (DEVICE Mode); 1: Periodic TX FIFO (HOST Mode) or FIFO 1 (DEVICE Mode); 2-15: FIFO n in DEVICE Mode; 16: Flush All TX FIFO; otherwise: Flush RX FIFO
* @param[in] num Flush FIFO, 0: non-periodic TX FIFO (HOST Mode) or FIFO 0 (DEVICE Mode); 1: Periodic TX FIFO (HOST Mode) or FIFO 1 (DEVICE Mode); 2-15: FIFO n in DEVICE Mode; 16: Flush All TX FIFO; otherwise: Flush RX FIFO
* @retval void
*/
void USB_FlushFIFO(uint32_t num);
......@@ -233,7 +233,7 @@ BOOL USB_roleIsHost(void);
/**
* @brief Control and get VBus Status (Only for HOST Mode)
* @param[in] opt Bit1: Set VBus using Bit0; Bit0: Turn VBus On or Off
* @retval BOOL TRUE: VBus is on; FALSE£ºVBus is off
* @retval BOOL TRUE: VBus is on; FALSE: VBus is off
* @note It cannot control VBus actually due to HW problem
*/
BOOL USB_hostVBus(uint32_t opt);
......@@ -363,13 +363,13 @@ BOOL USB_hostINT_isPCD(void);
void USB_hostINT_clrPCD(void);
/**
* @brief Port Enable/Disable Change£¨PEDC£©Interrupt Asserted (Only for HOST Mode)
* @brief Port Enable/Disable Change (PEDC) Interrupt Asserted (Only for HOST Mode)
* @retval BOOL TRUE: Interrupt Asserted; FALSE: Interrupt is NOT asserted
*/
BOOL USB_hostINT_isPEDC(void);
/**
* @brief Clear Port Enable/Disable Change£¨PEDC£©Interrupt Flag (Only for HOST Mode)
* @brief Clear Port Enable/Disable Change (PEDC) Interrupt Flag (Only for HOST Mode)
* @retval void
*/
void USB_hostINT_clrPEDC(void);
......@@ -520,7 +520,7 @@ void USB_devINT_enDone(uint32_t ep, BOOL in, BOOL en);
* @brief Transaction Done Interrupt Asserted (Only for DEVICE Mode)
* @param[in] ep Endpoint
* @param[in] in Endpoint Direction, TRUE: IN; FALSE: OUT
* @retval uint32_t Result, Bit0: Done; Bit1£ºBuffer Not Available Error; Bit2: SETUP Phase Done
* @retval uint32_t Result, Bit0: Done; Bit1: Buffer Not Available Error; Bit2: SETUP Phase Done
*/
uint32_t USB_devINT_isDone(uint32_t ep, BOOL in);
......
bsp/allwinner/libraries/sunxi-hal/hal/source/ccmu/sunxi-ng/ccu.h
浏览文件 @ e49140b5
......@@ -45,7 +45,7 @@ struct clk_core;
struct clk_ops;
#undef BIT
#define BIT(x) (1 << (x))
#define BIT(x) (1UL << (x))
#define BITS_PER_LONGS 32
#define GENMASK(h, l) \
......
bsp/allwinner/libraries/sunxi-hal/hal/source/regulator/type.h
浏览文件 @ e49140b5
......@@ -34,7 +34,7 @@ typedef unsigned long long int u64;
#define true 1
#define false 0
#define BIT(nr) (1 << (nr))
#define BIT(nr) (1UL << (nr))
/* Compute the number of elements in the given array */
#define ARRAY_SIZE(a) \
......
bsp/allwinner/libraries/sunxi-hal/hal/source/spinor/inter.h
浏览文件 @ e49140b5
......@@ -13,7 +13,7 @@
#define SPINOR_INFO(fmt, arg...) hal_log_info(SPINOR_FMT(fmt), ##arg)
#ifndef BIT
#define BIT(x) (1 << x)
#define BIT(x) (1UL << (x))
#endif
#ifndef MIN
......
bsp/allwinner_tina/drivers/drv_sdio.h
浏览文件 @ e49140b5
......@@ -63,7 +63,7 @@ typedef struct tina_mmc *tina_mmc_t;
#define MMC1 ((tina_mmc_t)MMC1_BASE_ADDR)
#define BIT(x) (1<<(x))
#define BIT(x) (1UL<<(x))
/* Struct for Intrrrupt Information */
#define SDXC_RespErr BIT(1) //0x2
#define SDXC_CmdDone BIT(2) //0x4
......
bsp/bluetrum/libraries/hal_libraries/bmsis/include/ab32vgx.h
浏览文件 @ e49140b5
......@@ -13,7 +13,7 @@
#define UINT_MAX 0xffffffff
#endif // UINT_MAX
#define BIT(n) (1ul << (n))
#define BIT(n) (1UL << (n))
#define AT(x) __attribute__((section(#x)))
#define ALIGNED(n) __attribute__((aligned(n)))
......
bsp/qemu-virt64-aarch64/drivers/drv_gpio.c
浏览文件 @ e49140b5
......@@ -26,7 +26,7 @@
#define GPIOMIS 0x418
#define GPIOIC 0x41c
#define BIT(x) (1 << (x))
#define BIT(x) (1UL << (x))
#define PL061_GPIO_NR 8
......
bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pmic.h
浏览文件 @ e49140b5
......@@ -325,7 +325,7 @@ nvm_rank_ldo5:
#define OTP_OUTPUT_LDO5 ((NVM_SECTOR3_REGISTER_6 & 0x03)) // nvm_output_ldo5
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define BIT(_x) (1<<(_x))
#define BIT(_x) (1UL << (_x))
#define STM32_PMIC_NUM_IRQ_REGS 4
#define TURN_ON_REG 0x1
......
bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_pmic.h
浏览文件 @ e49140b5
......@@ -325,7 +325,7 @@ nvm_rank_ldo5:
#define OTP_OUTPUT_LDO5 ((NVM_SECTOR3_REGISTER_6 & 0x03)) // nvm_output_ldo5
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define BIT(_x) (1<<(_x))
#define BIT(_x) (1UL << (_x))
#define STM32_PMIC_NUM_IRQ_REGS 4
#define TURN_ON_REG 0x1
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或