提交 6d63451e 编写于 作者: B balanceTWK

[bsp][imxrt1052] add hardware i2c

上级 f06f50f4
......@@ -93,7 +93,7 @@ menu "Select spi bus drivers"
config LPSPI_CLK_SOURCE_DIVIDER
int "SPI bus clock source divider"
range 0 8
range 1 8
default 7
config RT_USING_SPIBUS1
......@@ -225,6 +225,58 @@ menu "Select spi bus drivers"
endchoice
endmenu
menu "Select iic drivers"
config LPI2C_CLOCK_SOURCE_DIVIDER
int "lpi2c bus clock source divider"
range 1 64
default 4
config RT_USING_I2C1
bool "USING I2C1"
select RT_USING_I2C
default n
if RT_USING_I2C1
config RT_USING_I2C1_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C1"
endif
config RT_USING_I2C2
bool "USING I2C2"
select RT_USING_I2C
default n
if RT_USING_I2C2
config RT_USING_I2C2_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C2"
endif
config RT_USING_I2C3
bool "USING I2C3"
select RT_USING_I2C
default n
if RT_USING_I2C3
config RT_USING_I2C3_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C3"
endif
config RT_USING_I2C4
bool "USING I2C4"
select RT_USING_I2C
default n
if RT_USING_I2C4
config RT_USING_I2C4_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C4"
endif
endmenu
#menu "SDRAM driver support"
config RT_USING_SDRAM
bool "Using sdram"
......
......@@ -30,6 +30,10 @@ if GetDepend('RT_USING_RTC_HP'):
if GetDepend('RT_USING_SPI'):
src += ['drv_spi_bus.c']
# add i2cbus driver code
if GetDepend('RT_USING_I2C'):
src += ['drv_i2c.c']
if GetDepend('BOARD_RT1050_EVK'):
src += ['hyper_flash_boot.c']
......
......@@ -19,23 +19,32 @@
* Change Logs:
* Date Author Notes
* 2017-08-08 Yang the first version
* 2018-03-24 LaiYiKeTang add hardware iic
*/
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "fsl_gpio.h"
#include "fsl_lpi2c.h"
#include "drv_i2c.h"
//#define DRV_I2C_DEBUG
#ifdef RT_USING_I2C
#ifdef RT_USING_I2C_BITOPS
#define I2C1BUS_NAME "i2c1"
#define I2C2BUS_NAME "i2c2"
#define I2C3BUS_NAME "i2c3"
#define I2C4BUS_NAME "i2c4"
/* Get frequency of lpi2c clock */
#define LPI2C_CLOCK_FREQUENCY ((CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8) / (LPI2C_CLOCK_SOURCE_DIVIDER + 1U))
#define I2CBUS_NAME "i2c0"
#if defined(RT_USING_I2C_BITOPS) && (defined(RT_USING_I2C1_BITOPS) || defined(RT_USING_I2C2_BITOPS) || \
defined(RT_USING_I2C3_BITOPS) || defined(RT_USING_I2C4_BITOPS))
struct stm32_i2c_bit_data
struct rt1052_i2c_bit_data
{
struct
{
......@@ -49,24 +58,24 @@ static void gpio_udelay(rt_uint32_t us)
volatile rt_int32_t i;
for (; us > 0; us--)
{
i = 1000;
i = 100;
while (i--);
}
}
static void gpio_set_input(GPIO_Type* base, uint32_t pin)
static void gpio_set_input(GPIO_Type *base, uint32_t pin)
{
if (base->GDIR & (1 << pin)) //output mode
if (base->GDIR & (1 << pin))
{
base->GDIR &= ~(1 << pin);
gpio_udelay(5);
}
}
static void gpio_set_output(GPIO_Type* base, uint32_t pin)
static void gpio_set_output(GPIO_Type *base, uint32_t pin)
{
if (!(base->GDIR & (1 << pin))) //input mode
{
if (!(base->GDIR & (1 << pin)))
{
base->GDIR |= (1 << pin);
gpio_udelay(5);
}
......@@ -74,26 +83,26 @@ static void gpio_set_output(GPIO_Type* base, uint32_t pin)
static void gpio_set_sda(void *data, rt_int32_t state)
{
struct stm32_i2c_bit_data *bd = data;
struct rt1052_i2c_bit_data *bd = data;
gpio_set_output(bd->sda.base, bd->sda.pin);
GPIO_PinWrite(bd->sda.base, bd->sda.pin, !!state);
}
static void gpio_set_scl(void *data, rt_int32_t state)
{
struct stm32_i2c_bit_data *bd = data;
struct rt1052_i2c_bit_data *bd = data;
gpio_set_output(bd->scl.base, bd->scl.pin);
GPIO_PinWrite(bd->scl.base, bd->scl.pin, !!state);
}
static rt_int32_t gpio_get_sda(void *data)
{
struct stm32_i2c_bit_data *bd = data;
struct rt1052_i2c_bit_data *bd = data;
gpio_set_input(bd->sda.base, bd->sda.pin);
return GPIO_ReadPinInput(bd->sda.base, bd->sda.pin);
......@@ -101,89 +110,434 @@ static rt_int32_t gpio_get_sda(void *data)
static rt_int32_t gpio_get_scl(void *data)
{
struct stm32_i2c_bit_data *bd = data;
struct rt1052_i2c_bit_data *bd = data;
gpio_set_input(bd->scl.base, bd->scl.pin);
return GPIO_ReadPinInput(bd->scl.base, bd->scl.pin);
}
#endif
#else /* RT_USING_I2C_BITOPS */
// todo : add hardware i2c
#endif /* RT_USING_I2C_BITOPS */
#ifdef RT_USING_I2C1
#ifdef RT_USING_I2C1_BITOPS
int rt_hw_i2c_init(void)
#else
static struct rt1052_i2c_bus lpi2c1 =
{
.I2C = LPI2C1,
.device_name = I2C1BUS_NAME,
};
#endif /* RT_USING_I2C1_BITOPS */
#endif /* RT_USING_I2C1 */
#ifdef RT_USING_I2C2
#ifdef RT_USING_I2C2_BITOPS
#else
static struct rt1052_i2c_bus lpi2c2 =
{
.I2C = LPI2C2,
.device_name = I2C2BUS_NAME,
};
#endif /* RT_USING_I2C2_BITOPS */
#endif /* RT_USING_I2C2 */
#ifdef RT_USING_I2C3
#ifdef RT_USING_I2C3_BITOPS
#else
static struct rt1052_i2c_bus lpi2c3 =
{
.I2C = LPI2C3,
.device_name = I2C3BUS_NAME,
};
#endif /* RT_USING_I2C3_BITOPS */
#endif /* RT_USING_I2C3 */
#ifdef RT_USING_I2C4
#ifdef RT_USING_I2C4_BITOPS
#else
static struct rt1052_i2c_bus lpi2c4 =
{
.I2C = LPI2C4,
.device_name = I2C4BUS_NAME,
};
#endif /* RT_USING_I2C1_BITOPS */
#endif /* RT_USING_I2C4 */
#if (defined(RT_USING_I2C1) || defined(RT_USING_I2C2) || \
defined(RT_USING_I2C3) || defined(RT_USING_I2C4))
static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num);
static rt_size_t imxrt_i2c_slv_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num);
static rt_err_t imxrt_i2c_bus_control(struct rt_i2c_bus_device *bus,
rt_uint32_t,
rt_uint32_t);
static const struct rt_i2c_bus_device_ops imxrt_i2c_ops =
{
imxrt_i2c_mst_xfer,
imxrt_i2c_slv_xfer,
imxrt_i2c_bus_control,
};
#if !defined(RT_USING_I2C_BITOPS) || (!defined(RT_USING_I2C1_BITOPS) || !defined(RT_USING_I2C2_BITOPS) || \
!defined(RT_USING_I2C3_BITOPS) || !defined(RT_USING_I2C4_BITOPS))
void imxrt_lpi2c_gpio_init(struct rt1052_i2c_bus *bus)
{
#ifdef RT_USING_I2C_BITOPS
/* register I2C1: SCL/P0_20 SDA/P0_19 */
if (bus->I2C == LPI2C1)
{
static struct rt_i2c_bus_device i2c_device;
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL,
1U);
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA,
1U);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL,
0xD8B0u);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA,
0xD8B0u);
}
else if (bus->I2C == LPI2C2)
{
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_04_LPI2C2_SCL,
1U);
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_05_LPI2C2_SDA,
1U);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_04_LPI2C2_SCL,
0xD8B0u);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_05_LPI2C2_SDA,
0xD8B0u);
}
else if (bus->I2C == LPI2C3)
{
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL,
1U);
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA,
1U);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL,
0xD8B0u);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA,
0xD8B0u);
}
else if (bus->I2C == LPI2C4)
{
IOMUXC_SetPinMux(
IOMUXC_GPIO_EMC_12_LPI2C4_SCL,
1U);
IOMUXC_SetPinMux(
IOMUXC_GPIO_EMC_11_LPI2C4_SDA,
1U);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_EMC_12_LPI2C4_SCL,
0xD8B0u);
IOMUXC_SetPinConfig(
IOMUXC_GPIO_EMC_11_LPI2C4_SDA,
0xD8B0u);
}
else
{
RT_ASSERT(RT_NULL);
}
}
static const struct stm32_i2c_bit_data _i2c_bdata =
{
/* SCL */ {GPIO1, 16},
/* SDA */ {GPIO1, 17},
};
static rt_err_t imxrt_lpi2c_configure(struct rt1052_i2c_bus *bus, lpi2c_master_config_t *cfg)
{
RT_ASSERT(bus != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
imxrt_lpi2c_gpio_init(bus);
bus->parent.ops = &imxrt_i2c_ops;
LPI2C_MasterInit(bus->I2C, cfg, LPI2C_CLOCK_FREQUENCY);
return RT_EOK;
}
static const struct rt_i2c_bit_ops _i2c_bit_ops =
#endif
static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num)
{
struct rt1052_i2c_bus *rt1052_i2c;
rt_uint32_t numbak;
rt_uint16_t i;
RT_ASSERT(bus != RT_NULL);
rt1052_i2c = (struct rt1052_i2c_bus *) bus;
rt1052_i2c->msg = msgs;
rt1052_i2c->msg_ptr = 0;
rt1052_i2c->msg_cnt = num;
rt1052_i2c->dptr = 0;
for (i = 0; i < num; i++)
{
if (rt1052_i2c->msg[i].flags & RT_I2C_RD)
{
(void*)&_i2c_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
gpio_pin_config_t pin_config = {
kGPIO_DigitalOutput, 0,
};
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16,
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17,
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
/* Enable touch panel controller */
GPIO_PinInit(_i2c_bdata.sda.base, _i2c_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c_bdata.scl.base, _i2c_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c_bdata.sda.base, _i2c_bdata.sda.pin);
GPIO_PortSet(_i2c_bdata.scl.base, _i2c_bdata.scl.pin);
//RT_ASSERT(gpio_get_scl(&_i2c_bdata) != 0);
//RT_ASSERT(gpio_get_sda(&_i2c_bdata) != 0);
i2c_device.priv = (void *)&_i2c_bit_ops;
rt_i2c_bit_add_bus(&i2c_device, I2CBUS_NAME);
} /* register I2C */
#else /* RT_USING_I2C_BITOPS */
// Todo : add hardware i2c
#endif /* RT_USING_I2C_BITOPS */
LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Read);
if (LPI2C_MasterReceive(rt1052_i2c->I2C, rt1052_i2c->msg->buf, rt1052_i2c->msg->len) == kStatus_LPI2C_Nak)
{
i = 0;
break;
}
}
else
{
LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Write);
if (LPI2C_MasterSend(rt1052_i2c->I2C, rt1052_i2c->msg->buf, rt1052_i2c->msg->len) == kStatus_LPI2C_Nak)
{
i = 0;
break;
}
}
}
i2c_dbg("send stop condition\n");
LPI2C_MasterStop(rt1052_i2c->I2C);
numbak = i;
rt1052_i2c->msg = RT_NULL;
rt1052_i2c->msg_ptr = 0;
rt1052_i2c->msg_cnt = 0;
rt1052_i2c->dptr = 0;
return numbak;
}
static rt_size_t imxrt_i2c_slv_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num)
{
return 0;
}
static rt_err_t imxrt_i2c_bus_control(struct rt_i2c_bus_device *bus,
rt_uint32_t cmd,
rt_uint32_t arg)
{
return RT_ERROR;
}
#endif
int rt_hw_i2c_init(void)
{
#if !defined(RT_USING_I2C_BITOPS) || (!defined(RT_USING_I2C1_BITOPS) || !defined(RT_USING_I2C2_BITOPS) || \
!defined(RT_USING_I2C3_BITOPS) || !defined(RT_USING_I2C4_BITOPS))
lpi2c_master_config_t masterConfig = {0};
/*Clock setting for LPI2C*/
CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, LPI2C_CLOCK_SOURCE_DIVIDER);
#endif
#if defined(RT_USING_I2C_BITOPS) && (defined(RT_USING_I2C1_BITOPS) || defined(RT_USING_I2C2_BITOPS) || \
defined(RT_USING_I2C3_BITOPS) || defined(RT_USING_I2C4_BITOPS))
gpio_pin_config_t pin_config =
{
kGPIO_DigitalOutput,
0,
};
#endif /* RT_USING_I2C_BITOPS= RT_USING_I2C1_BITOPS RT_USING_I2C2_BITOPS RT_USING_I2C3_BITOPS RT_USING_I2C4_BITOPS */
#if defined(RT_USING_I2C1) && defined(RT_USING_I2C1_BITOPS)
static struct rt_i2c_bus_device i2c1_device;
static const struct rt1052_i2c_bit_data _i2c1_bdata =
{
/* SCL */ {GPIO1, 16},
/* SDA */ {GPIO1, 17},
};
static const struct rt_i2c_bit_ops _i2c1_bit_ops =
{
(void *) &_i2c1_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c1_bdata.sda.base, _i2c1_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c1_bdata.scl.base, _i2c1_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c1_bdata.sda.base, _i2c1_bdata.sda.pin);
GPIO_PortSet(_i2c1_bdata.scl.base, _i2c1_bdata.scl.pin);
i2c1_device.priv = (void *) &_i2c1_bit_ops;
rt_i2c_bit_add_bus(&i2c1_device, I2C1BUS_NAME);
#elif defined(RT_USING_I2C1) && !defined(RT_USING_I2C1_BITOPS)
LPI2C_MasterGetDefaultConfig(&masterConfig);
imxrt_lpi2c_configure(&lpi2c1, &masterConfig);
rt_i2c_bus_device_register(&lpi2c1.parent, lpi2c1.device_name);
#endif
#if defined(RT_USING_I2C2) && defined(RT_USING_I2C2_BITOPS)
static struct rt_i2c_bus_device i2c2_device;
static const struct rt1052_i2c_bit_data _i2c2_bdata =
{
/* SCL */ {GPIO2, 4},
/* SDA */ {GPIO2, 5},
};
static const struct rt_i2c_bit_ops _i2c2_bit_ops =
{
(void *) &_i2c2_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_GPIO2_IO04, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_GPIO2_IO04, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_GPIO2_IO05, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_GPIO2_IO05, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c2_bdata.sda.base, _i2c2_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c2_bdata.scl.base, _i2c2_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c2_bdata.sda.base, _i2c2_bdata.sda.pin);
GPIO_PortSet(_i2c2_bdata.scl.base, _i2c2_bdata.scl.pin);
i2c2_device.priv = (void *) &_i2c2_bit_ops;
rt_i2c_bit_add_bus(&i2c2_device, I2C2BUS_NAME);
#elif defined(RT_USING_I2C2) && !defined(RT_USING_I2C2_BITOPS)
LPI2C_MasterGetDefaultConfig(&masterConfig);
imxrt_lpi2c_configure(&lpi2c2, &masterConfig);
rt_i2c_bus_device_register(&lpi2c2.parent, lpi2c2.device_name);
#endif
#if defined(RT_USING_I2C3) && defined(RT_USING_I2C3_BITOPS)
static struct rt_i2c_bus_device i2c3_device;
static const struct rt1052_i2c_bit_data _i2c3_bdata =
{
/* SCL */ {GPIO1, 23},
/* SDA */ {GPIO1, 22},
};
static const struct rt_i2c_bit_ops _i2c3_bit_ops =
{
(void *) &_i2c3_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_GPIO1_IO23, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_07_GPIO1_IO23, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c3_bdata.sda.base, _i2c3_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c3_bdata.scl.base, _i2c3_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c3_bdata.sda.base, _i2c3_bdata.sda.pin);
GPIO_PortSet(_i2c3_bdata.scl.base, _i2c3_bdata.scl.pin);
i2c3_device.priv = (void *) &_i2c3_bit_ops;
rt_i2c_bit_add_bus(&i2c3_device, I2C3BUS_NAME);
#elif defined(RT_USING_I2C3) && !defined(RT_USING_I2C3_BITOPS)
LPI2C_MasterGetDefaultConfig(&masterConfig);
imxrt_lpi2c_configure(&lpi2c3, &masterConfig);
rt_i2c_bus_device_register(&lpi2c3.parent, lpi2c3.device_name);
#endif
#if defined(RT_USING_I2C4) && defined(RT_USING_I2C4_BITOPS)
static struct rt_i2c_bus_device i2c4_device;
static const struct rt1052_i2c_bit_data _i2c4_bdata =
{
/* SCL */ {GPIO4, 12},
/* SDA */ {GPIO4, 11},
};
static const struct rt_i2c_bit_ops _i2c4_bit_ops =
{
(void *) &_i2c4_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_GPIO4_IO12, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_12_GPIO4_IO12, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_GPIO4_IO11, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_11_GPIO4_IO11, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c4_bdata.sda.base, _i2c4_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c4_bdata.scl.base, _i2c4_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c4_bdata.sda.base, _i2c4_bdata.sda.pin);
GPIO_PortSet(_i2c4_bdata.scl.base, _i2c4_bdata.scl.pin);
i2c4_device.priv = (void *) &_i2c4_bit_ops;
rt_i2c_bit_add_bus(&i2c4_device, I2C4BUS_NAME);
#elif defined(RT_USING_I2C4) && !defined(RT_USING_I2C4_BITOPS)
LPI2C_MasterGetDefaultConfig(&masterConfig);
imxrt_lpi2c_configure(&lpi2c4, &masterConfig);
rt_i2c_bus_device_register(&lpi2c4.parent, lpi2c4.device_name);
#endif
return 0;
}
......@@ -197,7 +551,7 @@ static rt_device_t _i2c_find(const char *name)
rt_device_t dev;
dev = rt_device_find(name);
if (!dev)
if (!dev)
{
rt_kprintf("search device failed: %s\n", name);
return RT_NULL;
......@@ -210,7 +564,7 @@ static rt_device_t _i2c_find(const char *name)
}
rt_kprintf("open i2c bus: %s\n", name);
return dev;
}
......@@ -231,7 +585,7 @@ static void _search_i2c_device(rt_device_t dev, uint8_t cmd)
for (int i = 0; i <= 0x7f; i++)
{
int len;
msgs[0].addr = i;
msgs[1].addr = i;
len = rt_i2c_transfer((struct rt_i2c_bus_device *)dev, msgs, 2);
......@@ -239,9 +593,9 @@ static void _search_i2c_device(rt_device_t dev, uint8_t cmd)
{
count++;
rt_kprintf("add:%02X transfer success, id: %02X\n", i, buf);
}
}
}
rt_kprintf("i2c device: %d\n", count);
}
......@@ -253,14 +607,16 @@ static int i2c_test(const char *name, uint8_t cmd)
rt_kprintf("search i2c device faild\n");
return -1;
}
_search_i2c_device(dev, cmd);
rt_device_close(dev);
return 0;
}
FINSH_FUNCTION_EXPORT(i2c_test, e.g: i2c_test("i2c0", 0xA3));
FINSH_FUNCTION_EXPORT(i2c_test, e.g: i2c_test("i2c1", 0xA3));
#endif
#endif /* RT_USING_I2C */
/*
* File : drv_i2c.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2018-03-24 LaiYiKeTang the first version
*/
#ifndef __DRVI2C_H__
#define __DRVI2C_H__
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
struct rt1052_i2c_bus
{
struct rt_i2c_bus_device parent;
LPI2C_Type *I2C;
struct rt_i2c_msg *msg;
rt_uint32_t msg_cnt;
volatile rt_uint32_t msg_ptr;
volatile rt_uint32_t dptr;
char *device_name;
};
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册