1. fix bug in uffs_nandif.c to work with mtd nand driver; 2)clean code in...

1. fix bug in uffs_nandif.c to work with mtd nand driver; 2)clean code in uffs_nandif.c and dfs_uffs.h

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2575 bbd45198-f89e-11dd-88c7-29a3b14d5316

components/dfs/filesystems/uffs/dfs_uffs.h

@@ -11,32 +11,26 @@
 #include "uffs_config.h"
 #include "uffs/uffs_public.h"
 
-//#define UFFS_BLOCK_MARK_SPARE_OFFSET  4    /* indicate block bad or good, offset in spare */
-
-//#define RT_CONFIG_UFFS_ECC_MODE  UFFS_ECC_SOFT
-//#define RT_CONFIG_UFFS_ECC_MODE  UFFS_ECC_NONE
+/* the UFFS ECC mode opitons  */
+/* #define RT_CONFIG_UFFS_ECC_MODE  UFFS_ECC_HW_AUTO */
+/* #define RT_CONFIG_UFFS_ECC_MODE  UFFS_ECC_SOFT */
+/* #define RT_CONFIG_UFFS_ECC_MODE  UFFS_ECC_NONE */
 
 /* enable this ,you need provide a mark_badblock/check_block funciton */
-//#define RT_UFFS_USE_CHECK_MARK_FUNCITON
+/* #define RT_UFFS_USE_CHECK_MARK_FUNCITON */
 
 #if RT_CONFIG_UFFS_ECC_MODE == UFFS_ECC_SOFT      /* let uffs do soft ecc */
-
 #define RT_CONFIG_UFFS_LAYOUT    UFFS_LAYOUT_UFFS /* UFFS_LAYOUT_FLASH */
-#define RT_CONFIG_UFFS_ECC_SIZE  0                /* if 0, then uffs will caculate a proper ecc size */
 
 #elif RT_CONFIG_UFFS_ECC_MODE == UFFS_ECC_HW_AUTO /* nand driver make ecc and do ecc correct */
-
 #define RT_CONFIG_UFFS_LAYOUT    UFFS_LAYOUT_FLASH
-#define RT_CONFIG_UFFS_ECC_SIZE  4                /* if 0, then uffs will caculate a proper ecc size */
 
 #elif RT_CONFIG_UFFS_ECC_MODE == UFFS_ECC_NONE
-
 #define RT_CONFIG_UFFS_LAYOUT    UFFS_LAYOUT_UFFS /* UFFS_LAYOUT_FLASH */
-#define RT_CONFIG_UFFS_ECC_SIZE  0                /* if 0, then uffs will caculate a proper ecc size */
 
 #else
 #error "uffs under rt-thread do not support this ECC mode"
-#endif
+#endif /* RT_CONFIG_UFFS_ECC_MODE */
 
 #if (!CONFIG_USE_STATIC_MEMORY_ALLOCATOR)  && (CONFIG_USE_SYSTEM_MEMORY_ALLOCATOR)
 #define RT_UFFS_MEMORY_ALLOCATOR  1  /* use system memory allocator */
@@ -67,4 +61,5 @@ extern void uffs_setup_storage(
     struct uffs_StorageAttrSt *attr,
     struct rt_mtd_nand_device * nand);
 
+extern int dfs_uffs_init(void);
 #endif /* DFS_UFFS_H_ */

components/dfs/filesystems/uffs/uffs_nandif.c

@@ -143,13 +143,13 @@ void uffs_setup_storage(
 	rt_memset(attr, 0, sizeof(struct uffs_StorageAttrSt));
 
 //	attr->total_blocks = nand->end_block - nand->start_block + 1;/* no use */
-	attr->page_data_size = nand->page_size;		                 /* page data size */
-	attr->pages_per_block = nand->pages_per_block;               /* pages per block */
-	attr->spare_size = nand->oob_size;		  	                 /* page spare size */
-	attr->block_status_offs = UFFS_BLOCK_MARK_SPARE_OFFSET;      /* block status offset is 5th byte in spare */
-	attr->ecc_opt = RT_CONFIG_UFFS_ECC_MODE;                     /* ecc option */
-	attr->ecc_size = RT_CONFIG_UFFS_ECC_SIZE;		  	         /* ecc size */
-	attr->layout_opt = RT_CONFIG_UFFS_LAYOUT;                    /* let UFFS do the spare layout */
+	attr->page_data_size = nand->page_size;                /* page data size */
+	attr->pages_per_block = nand->pages_per_block;         /* pages per block */
+	attr->spare_size = nand->oob_size;                     /* page spare size */
+	attr->ecc_opt = RT_CONFIG_UFFS_ECC_MODE;               /* ecc option */
+	attr->ecc_size = 0;                                    /* ecc size is 0 , the uffs will calculate the ecc size*/
+	attr->block_status_offs = attr->ecc_size;              /* indicate block bad or good, offset in spare */
+	attr->layout_opt = RT_CONFIG_UFFS_LAYOUT;              /* let UFFS do the spare layout */
 }
 
 #elif  RT_CONFIG_UFFS_ECC_MODE == UFFS_ECC_HW_AUTO
@@ -316,13 +316,13 @@ void uffs_setup_storage(
 	rt_memset(attr, 0, sizeof(struct uffs_StorageAttrSt));
 
 //	attr->total_blocks = nand->end_block - nand->start_block + 1;/* no use */
-	attr->page_data_size = nand->page_size;		                 /* page data size */
-	attr->pages_per_block = nand->pages_per_block; /* pages per block */
-	attr->spare_size = nand->oob_size;		  	                 /* page spare size */
-	attr->ecc_opt = RT_CONFIG_UFFS_ECC_MODE;                     /* ecc option */
-	attr->ecc_size = nand->oob_size-nand->oob_free;//RT_CONFIG_UFFS_ECC_SIZE;		  	         /* ecc size */
-	attr->block_status_offs = attr->ecc_size;//UFFS_BLOCK_MARK_SPARE_OFFSET;      /* block status offset is 5th byte in spare */
-	attr->layout_opt = RT_CONFIG_UFFS_LAYOUT;                    /* let UFFS do the spare layout */
+	attr->page_data_size = nand->page_size;                /* page data size */
+	attr->pages_per_block = nand->pages_per_block;         /* pages per block */
+	attr->spare_size = nand->oob_size;                     /* page spare size */
+	attr->ecc_opt = RT_CONFIG_UFFS_ECC_MODE;               /* ecc option */
+	attr->ecc_size = nand->oob_size-nand->oob_free;        /* ecc size */
+	attr->block_status_offs = attr->ecc_size;              /* indicate block bad or good, offset in spare */
+	attr->layout_opt = RT_CONFIG_UFFS_LAYOUT;              /* let UFFS do the spare layout */
 
 	/* calculate the ecc layout array */
 	hw_flash_data_layout[0] = attr->ecc_size + 1; /* ecc size + 1byte block status */