- 25 3月, 2017 40 次提交
-
-
由 David S. Miller 提交于
Alexander Duyck says: ==================== Add busy poll support for epoll This patch set adds support for using busy polling with epoll. The main idea behind this is that we record the NAPI ID for the last event that is moved onto the ready list for the epoll context and then when we no longer have any events on the ready list we begin polling with that ID. If the busy polling does not yield any events then we will reset the NAPI ID to 0 and wait until a new event is added to the ready list with a valid NAPI ID before we will resume busy polling. Most of the changes in this set authored by me are meant to be cleanup or fixes for various things. For example, I am trying to make it so that we don't perform hash look-ups for the NAPI instance when we are only working with sender_cpu and the like. At the heart of this set is the last 3 patches which enable epoll support and add support for obtaining the NAPI ID of a given socket. With these it becomes possible for an application to make use of epoll and get optimal busy poll utilization by stacking multiple sockets with the same NAPI ID on the same epoll context. v1: The first version of this series only allowed epoll to busy poll if all of the sockets with a NAPI ID shared the same NAPI ID. I feel we were too strict with this requirement, so I changed the behavior for v2. v2: The second version was pretty much a full rewrite of the first set. The main changes consisted of pulling apart several patches to better address the need to clean up a few items and to make the code easier to review. In the set however I went a bit overboard and was trying to fix an issue that would only occur with 500+ years of uptime, and in the process limited the range for busy_poll/busy_read unnecessarily. v3: Split off the code for limiting busy_poll and busy_read into a separate patch for net. Updated patch that changed busy loop time tracking so that it uses "local_clock() >> 10" as we originally did. Tweaked "Change return type.." patch by moving declaration of "work" inside the loop where is was accessed and always reset to 0. Added "Acked-by" for patches that received acks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
This socket option returns the NAPI ID associated with the queue on which the last frame is received. This information can be used by the apps to split the incoming flows among the threads based on the Rx queue on which they are received. If the NAPI ID actually represents a sender_cpu then the value is ignored and 0 is returned. Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
This patch adds busy poll support to epoll. The implementation is meant to be opportunistic in that it will take the NAPI ID from the last socket that is added to the ready list that contains a valid NAPI ID and it will use that for busy polling until the ready list goes empty. Once the ready list goes empty the NAPI ID is reset and busy polling is disabled until a new socket is added to the ready list. In addition when we insert a new socket into the epoll we record the NAPI ID and assume we are going to receive events on it. If that doesn't occur it will be evicted as the active NAPI ID and we will resume normal behavior. An application can use SO_INCOMING_CPU or SO_REUSEPORT_ATTACH_C/EBPF socket options to spread the incoming connections to specific worker threads based on the incoming queue. This enables epoll for each worker thread to have only sockets that receive packets from a single queue. So when an application calls epoll_wait() and there are no events available to report, busy polling is done on the associated queue to pull the packets. Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Move the core functionality in sk_busy_loop() to napi_busy_loop() and make it independent of sk. This enables re-using this function in epoll busy loop implementation. Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch flips the logic we were using to determine if the busy polling has timed out. The main motivation for this is that we will need to support two different possible timeout values in the future and by recording the start time rather than when we would want to end we can focus on making the end_time specific to the task be it epoll or socket based polling. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
checking the return value of sk_busy_loop. As there are only a few consumers of that data, and the data being checked for can be replaced with a check for !skb_queue_empty() we might as well just pull the code out of sk_busy_loop and place it in the spots that actually need it. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Instead of defining two versions of skb_mark_napi_id I think it is more readable to just match the format of the sk_mark_napi_id functions and just wrap the contents of the function instead of defining two versions of the function. This way we can save a few lines of code since we only need 2 of the ifdef/endif but needed 5 for the extra function declaration. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
While working on some recent busy poll changes we found that child sockets were being instantiated without NAPI ID being set. In our first attempt to fix it, it was suggested that we should just pull programming the NAPI ID into the function itself since all callers will need to have it set. In addition to the NAPI ID change I have dropped the code that was populating the Rx hash since it was actually being populated in tcp_get_cookie_sock. Reported-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch is a cleanup/fix for NAPI IDs following the changes that made it so that sender_cpu and napi_id were doing a better job of sharing the same location in the sk_buff. One issue I found is that we weren't validating the napi_id as being valid before we started trying to setup the busy polling. This change corrects that by using the MIN_NAPI_ID value that is now used in both allocating the NAPI IDs, as well as validating them. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox mlx5e XDP performance optimization This series provides some preformancee optimizations for mlx5e driver, especially for XDP TX flows. 1st patch is a simple change of rmb to dma_rmb in CQE fetch routine which shows a huge gain for both RX and TX packet rates. 2nd patch removes write combining logic from the driver TX handler and simplifies the TX logic while improving TX CPU utilization. All other patches combined provide some refactoring to the driver TX flows to allow some significant XDP TX improvements. More details and performance numbers per patch can be found in each patch commit message compared to the preceding patch. Overall performance improvemnets System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Baseline Now improvement --------------------------------------------------------------- TX packets (24 threads) 45Mpps 54Mpps 20% TC stack Drop (1 core) 3.45Mpps 3.6Mpps 5% XDP Drop (1 core) 14Mpps 16.9Mpps 20% XDP TX (1 core) 10.4Mpps 13.7Mpps 31% ==================== Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Different SQ types (tx, xdp, ico) are growing apart, we separate them and remove unwanted parts in each one of them, to simplify data path and utilize data cache. Remove DB union from SQ structures since it is not needed anymore as we now have different SQ data type for each SQ. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
In the next patches we will introduce different SQ types, and we would want to reuse those functions, in this patch we make them agnostic to SQ type (txq, xdp, ico). Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Rename mlx5e_{create,destroy}_{sq,rq,cq} to mlx5e_{alloc,free}_{sq,rq,cq}. Rename mlx5e_{enable,disable}_{sq,rq,cq} to mlx5e_{create,destroy}_{sq,rq,cq}. mlx5e_{enable,disable}_{sq,rq,cq} used to actually create/destroy the SQ in FW, so we rename them to align the functions names with FW semantics. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
In the next patches we will introduce different SQ types, for that we here generalize some TX helper functions to work with more basic SQ parameters, in order to re-use them for the different SQ types. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
XDP SQ has a fixed size WQE (MLX5E_XDP_TX_WQEBBS = 1) and only posts one kind of WQE (MLX5_OPCODE_SEND), Also we initialize SQ descriptors static fields once on open_xdpsq, rather than every time on critical path. Optimize the code in light of those facts and add a prefetch of the TX descriptor first thing in the xdp xmit function. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Before Now improvement --------------------------------------------------------------- XDP TX (1 core) 13Mpps 13.7Mpps 5% Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Handle XDP TX completions before handling RX packets, to make sure more free space is available for XDP TX packets a moment before handling RX packets. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Before Now improvement --------------------------------------------------------------- XDP Drop (1 core) 16.9Mpps 16.9Mpps No change XDP TX (1 core) 12Mpps 13Mpps 8% Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
To save many rq->channel->sq dereferences in fast-path. And rename it to xdpsq. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Move struct mlx5e_rq and friends to appear after mlx5e_sq declaration in en.h. We will need this for next patch to move the mlx5e_sq instance into mlx5e_rq struct for XDP SQs. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
XDP code belongs to RX path, move mlx5e_poll_xdp_tx_cq and mlx5e_free_xdp_tx_descs to en_rx.c. Rename them to mlx5e_poll_xdpsq_cq and mlx5e_free_xdpsq_descs. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
One is sufficient since Blue Flame is not supported anymore. This will also come in handy for switchdev mode to save resources, since VF representors will use same single UAR as well for their own SQs. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
mlx5e netdev Blue Flame (write combining) support demands a lot of overhead for a little latency gain for some special cases, this overhead is hurting the common case. Here we remove xmit Blue Flame support by creating all bfregs with no write combining for all SQs, and we remove a lot of BF logic and conditions from xmit data path. Simplify mlx5e_tx_notify_hw (doorbell function) by removing BF related code and by removing one memory barrier needed for WC mapped SQ doorbell buffers, which no longer exist. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Before Now improvement --------------------------------------------------------------- TX packets (24 threads) 50Mpps 54Mpps 8% Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Use dma_rmb in mlx5e_get_cqe rather than aggressive rmb (at least on some architectures), this should help improve the performance on such CPU archs where dma_rmb is optimized. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Baseline Now improvement --------------------------------------------------------------- TX packets (24 threads) 45Mpps 50Mpps 11% TC stack Drop (1 core) 3.45Mpps 3.6Mpps 5% XDP Drop (1 core) 14Mpps 16.9Mpps 20% XDP TX (1 core) 10.4Mpps 12Mpps 15% Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
bcm_sf2 does require the MDIO_BCM_UNIMAC driver which is now dependent on OF_MDIO but also internally uses of_mdio.c provided routines which are guarted with OF_MDIO. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
David Lebrun says: ==================== Performances improvement for IPv6 Segment Routing This patch series improves the performances of IPv6 SR by optimizing skb head reallocation and extending the use of dst_cache. The overall performances improve by 35%. Before patch series (SRH encap): Result: OK: 7348320(c7347271+d1048) usec, 5000000 (1000byte,0frags) 680427pps 5443Mb/sec (5443416000bps) errors: 0 After patch series (SRH encap): Result: OK: 4774543(c4774084+d459) usec, 5000000 (1000byte,0frags) 1047220pps 8377Mb/sec (8377760000bps) errors: 0 Baseline for plain IPv6 forwarding: Result: OK: 4244144(c4243722+d422) usec, 5000000 (1000byte,0frags) 1178093pps 9424Mb/sec (9424744000bps) errors: 0 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Lebrun 提交于
We already use dst_cache in seg6_output, when handling locally generated packets. We extend it in seg6_input, to also handle forwarded packets, and avoid unnecessary fib lookups. Performances for SRH encapsulation before the patch: Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags) 884006pps 7072Mb/sec (7072048000bps) errors: 0 Performances after the patch: Result: OK: 4774543(c4774084+d459) usec, 5000000 (1000byte,0frags) 1047220pps 8377Mb/sec (8377760000bps) errors: 0 Signed-off-by: NDavid Lebrun <david.lebrun@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Lebrun 提交于
To insert or encapsulate a packet with an SRH, we need a large enough skb headroom. Currently, we are using pskb_expand_head to inconditionally increase the size of the headroom by the amount needed by the SRH (and IPv6 header). If this reallocation is performed by another CPU than the one that initially allocated the skb, then when the initial CPU kfree the skb, it will enter the __slab_free slowpath, impacting performances. This patch replaces pskb_expand_head with skb_cow_head, that will reallocate the skb head only if the headroom is not large enough. Performances for SRH encapsulation before the patch: Result: OK: 7348320(c7347271+d1048) usec, 5000000 (1000byte,0frags) 680427pps 5443Mb/sec (5443416000bps) errors: 0 Performances after the patch: Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags) 884006pps 7072Mb/sec (7072048000bps) errors: 0 Signed-off-by: NDavid Lebrun <david.lebrun@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
Use setup_deferrable_timer() instead of init_timer_deferrable() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: Query resources from firmware Ido says: Some parts of the driver already use the resource query mechanism, but in other parts we still rely on hard coded values that may change over time. This patchset removes most of these remaining values and queries them from the firmware instead. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
As explained in the previous patch, the cell size may change in future devices, so query it from the firmware instead of hard coding it. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The sizes and thresholds of the priority group (PG) buffers are configured in cells, which represent a specific amount of bytes. The cell size can vary in different devices, so it's better to query it from the firmware than hard coding it. Refactor the code dealing with this value into different functions, so that it will be easier to make the conversion in the next patch. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Instead of hard coding the size of the shared buffer in the driver, query it from the firmware, as it may change in future devices. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
We currently hard code the maximum number of ports in the driver, but this may change in future devices, so query it from the firmware instead. Fallback to a maximum of 64 ports in case this number can't be queried. This should only happen in SwitchX-2 for which this number is correct. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Instead of hard coding the number of LPM trees in the driver, query it from the firmware, as it may change in future devices. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-03-23 This series contains updates to i40e and i40e.txt documentation. Jake provides all the changes in the series which are centered around ntuple filter fixes and additional support. Fixed the current implementation of .set_rxnfc, where we were not reading the mask field for filter entries which was resulting in filters not behaving as expected and not working correctly. When cleaning up after disabling flow director support, ensure that the default input set is correctly reprogrammed. Since the hardware only supports a single input set for all flows of that type, the driver shall only allow the input set to change if there are no other configured filters for that flow type, so add support to detect when we can update the input set for each flow type. Align the driver to other drivers to partition the ring_cookie value into 8bits of VF index, along with 32bits of queue number instead of using the user-def field. Added support to parse the user-def field into a data structure format to allow future extensions of the user-def filed by keeping all the code that read/writes the field into a single location. Added support for flexible payloads passed via ethtool user-def field. We support a single flexible word (2byte) value per protocol type, and we handle the FLX_PIT register using a list of flexible entries so that each flow type may be configured separately. Enabled flow director filters for SCTPv4 packets using the ethtool ntuple interface to enable filters. Updated the documentation on the i40e driver to include the newly added support to ntuple filters. Reduced complexity of a if-continue-else-break section of code by taking advantage of using hlist_for_each_entry_continue() instead. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Fix copy and paste error setting rt_ttl_propagate. Fixes: 5b441ac8 ("mpls: allow TTL propagation to IP packets to be configured") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Acked-by: NRobert Shearman <rshearma@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao Feng 提交于
Because sysctl_tcp_adv_win_scale could be changed any time, so there is one race in tcp_win_from_space. For example, 1.sysctl_tcp_adv_win_scale<=0 (sysctl_tcp_adv_win_scale is negative now) 2.space>>(-sysctl_tcp_adv_win_scale) (sysctl_tcp_adv_win_scale is postive now) As a result, tcp_win_from_space returns 0. It is unexpected. Certainly if the compiler put the sysctl_tcp_adv_win_scale into one register firstly, then use the register directly, it would be ok. But we could not depend on the compiler behavior. Signed-off-by: NGao Feng <fgao@ikuai8.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Converting IPv4 address doesn't need 64-bit arithmetic. Space savings: 10 bytes! add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10) function old new delta in_aton 96 86 -10 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felix Manlunas 提交于
The PF driver is incorrectly resetting Octeon when the module parameter "fw_type=none" is there. "fw_type=none" means the PF should not load any firmware to the NIC because Octeon is already running preloaded firmware. Fix it by putting an if (fw_type != none) around the reset code. Because the Octeon reset is now conditionally gone, when unloading the driver, conditionally send the RESET_PF command to the firmware who will then free up PF-related data structures. Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NSatanand Burla <satananda.burla@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 subashab@codeaurora.org 提交于
Certain system process significant unconnected UDP workload. It would be preferrable to disable UDP early demux for those systems and enable it for TCP only. By disabling UDP demux, we see these slight gains on an ARM64 system- 782 -> 788Mbps unconnected single stream UDPv4 633 -> 654Mbps unconnected UDPv4 different sources The performance impact can change based on CPU architecure and cache sizes. There will not much difference seen if entire UDP hash table is in cache. Both sysctls are enabled by default to preserve existing behavior. v1->v2: Change function pointer instead of adding conditional as suggested by Stephen. v2->v3: Read once in callers to avoid issues due to compiler optimizations. Also update commit message with the tests. v3->v4: Store and use read once result instead of querying pointer again incorrectly. v4->v5: Refactor to avoid errors due to compilation with IPV6={m,n} Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Suggested-by: NEric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Tom Herbert <tom@herbertland.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: systemport: TX/NAPI improvements This patch series builds up on Doug's latest changes done in BCMGENET to reduce the number of spurious interrupts in NAPI, simplify pointer arithmetic and finally tracking of per TX ring statistics to be SMP friendly. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-