提交 d2aacaf0 编写于 作者: D Douglas Anderson

drm/panel: Check for already prepared/enabled in drm_panel

In a whole pile of panel drivers, we have code to make the
prepare/unprepare/enable/disable callbacks behave as no-ops if they've
already been called. It's silly to have this code duplicated
everywhere. Add it to the core instead so that we can eventually
delete it from all the drivers. Note: to get some idea of the
duplicated code, try:
  git grep 'if.*>prepared' -- drivers/gpu/drm/panel
  git grep 'if.*>enabled' -- drivers/gpu/drm/panel

NOTE: arguably, the right thing to do here is actually to skip this
patch and simply remove all the extra checks from the individual
drivers. Perhaps the checks were needed at some point in time in the
past but maybe they no longer are? Certainly as we continue
transitioning over to "panel_bridge" then we expect there to be much
less variety in how these calls are made. When we're called as part of
the bridge chain, things should be pretty simple. In fact, there was
some discussion in the past about these checks [1], including a
discussion about whether the checks were needed and whether the calls
ought to be refcounted. At the time, I decided not to mess with it
because it felt too risky.

Looking closer at it now, I'm fairly certain that nothing in the
existing codebase is expecting these calls to be refcounted. The only
real question is whether someone is already doing something to ensure
prepare()/unprepare() match and enabled()/disable() match. I would say
that, even if there is something else ensuring that things match,
there's enough complexity that adding an extra bool and an extra
double-check here is a good idea. Let's add a drm_warn() to let people
know that it's considered a minor error to take advantage of
drm_panel's double-checking but we'll still make things work fine.

We'll also add an entry to the official DRM todo list to remove the
now pointless check from the panels after this patch lands and,
eventually, fixup anyone who is triggering the new warning.

[1] https://lore.kernel.org/r/20210416153909.v4.27.I502f2a92ddd36c3d28d014dd75e170c2d405a0a5@changeidAcked-by: NNeil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.2.I59b417d4c29151cc2eff053369ec4822b606f375@changeid
上级 2ca376ef
......@@ -460,6 +460,30 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de>
Level: Starter
Clean up checks for already prepared/enabled in panels
------------------------------------------------------
In a whole pile of panel drivers, we have code to make the
prepare/unprepare/enable/disable callbacks behave as no-ops if they've already
been called. To get some idea of the duplicated code, try:
git grep 'if.*>prepared' -- drivers/gpu/drm/panel
git grep 'if.*>enabled' -- drivers/gpu/drm/panel
In the patch ("drm/panel: Check for already prepared/enabled in drm_panel")
we've moved this check to the core. Now we can most definitely remove the
check from the individual panels and save a pile of code.
In adition to removing the check from the individual panels, it is believed
that even the core shouldn't need this check and that should be considered
an error if other code ever relies on this check. The check in the core
currently prints a warning whenever something is relying on this check with
dev_warn(). After a little while, we likely want to promote this to a
WARN(1) to help encourage folks not to rely on this behavior.
Contact: Douglas Anderson <dianders@chromium.org>
Level: Starter/Intermediate
Core refactorings
=================
......
......@@ -105,11 +105,22 @@ EXPORT_SYMBOL(drm_panel_remove);
*/
int drm_panel_prepare(struct drm_panel *panel)
{
int ret;
if (!panel)
return -EINVAL;
if (panel->funcs && panel->funcs->prepare)
return panel->funcs->prepare(panel);
if (panel->prepared) {
dev_warn(panel->dev, "Skipping prepare of already prepared panel\n");
return 0;
}
if (panel->funcs && panel->funcs->prepare) {
ret = panel->funcs->prepare(panel);
if (ret < 0)
return ret;
}
panel->prepared = true;
return 0;
}
......@@ -128,11 +139,22 @@ EXPORT_SYMBOL(drm_panel_prepare);
*/
int drm_panel_unprepare(struct drm_panel *panel)
{
int ret;
if (!panel)
return -EINVAL;
if (panel->funcs && panel->funcs->unprepare)
return panel->funcs->unprepare(panel);
if (!panel->prepared) {
dev_warn(panel->dev, "Skipping unprepare of already unprepared panel\n");
return 0;
}
if (panel->funcs && panel->funcs->unprepare) {
ret = panel->funcs->unprepare(panel);
if (ret < 0)
return ret;
}
panel->prepared = false;
return 0;
}
......@@ -155,11 +177,17 @@ int drm_panel_enable(struct drm_panel *panel)
if (!panel)
return -EINVAL;
if (panel->enabled) {
dev_warn(panel->dev, "Skipping enable of already enabled panel\n");
return 0;
}
if (panel->funcs && panel->funcs->enable) {
ret = panel->funcs->enable(panel);
if (ret < 0)
return ret;
}
panel->enabled = true;
ret = backlight_enable(panel->backlight);
if (ret < 0)
......@@ -187,13 +215,22 @@ int drm_panel_disable(struct drm_panel *panel)
if (!panel)
return -EINVAL;
if (!panel->enabled) {
dev_warn(panel->dev, "Skipping disable of already disabled panel\n");
return 0;
}
ret = backlight_disable(panel->backlight);
if (ret < 0)
DRM_DEV_INFO(panel->dev, "failed to disable backlight: %d\n",
ret);
if (panel->funcs && panel->funcs->disable)
return panel->funcs->disable(panel);
if (panel->funcs && panel->funcs->disable) {
ret = panel->funcs->disable(panel);
if (ret < 0)
return ret;
}
panel->enabled = false;
return 0;
}
......
......@@ -198,6 +198,20 @@ struct drm_panel {
* the panel is powered up.
*/
bool prepare_prev_first;
/**
* @prepared:
*
* If true then the panel has been prepared.
*/
bool prepared;
/**
* @enabled:
*
* If true then the panel has been enabled.
*/
bool enabled;
};
void drm_panel_init(struct drm_panel *panel, struct device *dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册