drm/amd/display: Do not commit pipe when updating DRR

[WHY]
DRR and Pipe cannot be updated on
the same frame, or else underflow will
occur.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -3350,6 +3350,21 @@ static void commit_planes_for_stream(struct dc *dc,
 
 	dc_z10_restore(dc);
 
+	if (update_type == UPDATE_TYPE_FULL) {
+		/* wait for all double-buffer activity to clear on all pipes */
+		int pipe_idx;
+
+		for (pipe_idx = 0; pipe_idx < dc->res_pool->pipe_count; pipe_idx++) {
+			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx];
+
+			if (!pipe_ctx->stream)
+				continue;
+
+			if (pipe_ctx->stream_res.tg->funcs->wait_drr_doublebuffer_pending_clear)
+				pipe_ctx->stream_res.tg->funcs->wait_drr_doublebuffer_pending_clear(pipe_ctx->stream_res.tg);
+		}
+	}
+
 	if (get_seamless_boot_stream_count(context) > 0 && surface_count > 0) {
 		/* Optimize seamless boot flag keeps clocks and watermarks high until
 		 * first flip. After first flip, optimization is required to lower

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h

@@ -519,7 +519,8 @@ struct dcn_optc_registers {
 	type OTG_CRC_DATA_STREAM_COMBINE_MODE;\
 	type OTG_CRC_DATA_STREAM_SPLIT_MODE;\
 	type OTG_CRC_DATA_FORMAT;\
-	type OTG_V_TOTAL_LAST_USED_BY_DRR;
+	type OTG_V_TOTAL_LAST_USED_BY_DRR;\
+	type OTG_DRR_TIMING_DBUF_UPDATE_PENDING;
 
 #define TG_REG_FIELD_LIST_DCN3_2(type) \
 	type OTG_H_TIMING_DIV_MODE_MANUAL;

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c

@@ -291,6 +291,14 @@ static void optc3_set_timing_double_buffer(struct timing_generator *optc, bool e
 		   OTG_DRR_TIMING_DBUF_UPDATE_MODE, mode);
 }
 
+void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	REG_WAIT(OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, 0, 2, 100000); /* 1 vupdate at 5hz */
+
+}
+
 void optc3_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max)
 {
 	optc1_set_vtotal_min_max(optc, vtotal_min, vtotal_max);
@@ -360,6 +368,7 @@ static struct timing_generator_funcs dcn30_tg_funcs = {
 		.program_manual_trigger = optc2_program_manual_trigger,
 		.setup_manual_trigger = optc2_setup_manual_trigger,
 		.get_hw_timing = optc1_get_hw_timing,
+		.wait_drr_doublebuffer_pending_clear = optc3_wait_drr_doublebuffer_pending_clear,
 };
 
 void dcn30_timing_generator_init(struct optc *optc1)

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h

@@ -279,6 +279,7 @@
 	SF(OTG0_OTG_DRR_TRIGGER_WINDOW, OTG_DRR_TRIGGER_WINDOW_END_X, mask_sh),\
 	SF(OTG0_OTG_DRR_V_TOTAL_CHANGE, OTG_DRR_V_TOTAL_CHANGE_LIMIT, mask_sh),\
 	SF(OTG0_OTG_H_TIMING_CNTL, OTG_H_TIMING_DIV_BY2, mask_sh),\
+	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_MODE, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_BLANK_DATA_DOUBLE_BUFFER_EN, mask_sh)
 
@@ -317,6 +318,7 @@
 	SF(OTG0_OTG_DRR_TRIGGER_WINDOW, OTG_DRR_TRIGGER_WINDOW_END_X, mask_sh),\
 	SF(OTG0_OTG_DRR_V_TOTAL_CHANGE, OTG_DRR_V_TOTAL_CHANGE_LIMIT, mask_sh),\
 	SF(OTG0_OTG_H_TIMING_CNTL, OTG_H_TIMING_DIV_MODE, mask_sh),\
+	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_PENDING, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_DRR_TIMING_DBUF_UPDATE_MODE, mask_sh)
 
 void dcn30_timing_generator_init(struct optc *optc1);

drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h

@@ -331,6 +331,7 @@ struct timing_generator_funcs {
 			uint32_t vtotal_change_limit);
 
 	void (*init_odm)(struct timing_generator *tg);
+	void (*wait_drr_doublebuffer_pending_clear)(struct timing_generator *tg);
 };
 
 #endif