[Kconfig] Rename all of KConfig files to 'Kconfig'

KConfig → Kconfig

-source "$RTT_DIR/src/KConfig"
+source "$RTT_DIR/src/Kconfig"
 source "$RTT_DIR/libcpu/Kconfig"
-source "$RTT_DIR/components/KConfig"
+source "$RTT_DIR/components/Kconfig"

bsp/asm9260t/KConfig → bsp/asm9260t/Kconfig

@@ -15,10 +15,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
-
-menu "BSP_SPECIAL CONFIG"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config RT_USING_UART0
     bool "Using RT_USING_UART0"
@@ -37,9 +35,4 @@ config RT_USING_LED
 	default y
 	help
 		led blink demo
-endmenu
-
-
-
-    
-    
\ No newline at end of file
+ 

bsp/imx6ul/KConfig → bsp/imx6ul/Kconfig

@@ -20,7 +20,7 @@ config BOARD_IMX6UL
     select ARCH_ARM_CORTEX_A7
     default y
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 source "$BSP_DIR/drivers/Kconfig"

bsp/imxrt1052-evk/KConfig → bsp/imxrt1052-evk/Kconfig

@@ -15,10 +15,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
-
-menu "BSP_SPECIAL CONFIG"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config RT_USING_UART
     bool "Using RT_USING_UART"
@@ -29,10 +27,4 @@ config RT_USING_UART1
     bool "Using RT_USING_UART1"
     default y      
 endif
-    
-endmenu
-
-
-
-    
-    
\ No newline at end of file
+ 

bsp/lpc54608-LPCXpresso/Kconfig

@@ -18,8 +18,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config SOC_LPC54608
     bool 
@@ -28,8 +28,3 @@ config SOC_LPC54608
 
 source "$BSP_DIR/drivers/Kconfig"
 
-
-
-
-    
-    
\ No newline at end of file

bsp/qemu-vexpress-a9/Kconfig

@@ -15,6 +15,6 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 source "$BSP_DIR/drivers/Kconfig"

bsp/stm32f10x-HAL/KConfig → bsp/stm32f10x-HAL/Kconfig

@@ -15,8 +15,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 choice
     prompt "Device type"
@@ -182,8 +182,3 @@ if RT_USING_SPI
         default n
 endif
 
-
-
-
-    
-    
\ No newline at end of file

bsp/stm32f411-nucleo/KConfig → bsp/stm32f411-nucleo/Kconfig

@@ -15,18 +15,10 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
-
-menu "BSP_SPECIAL CONFIG"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config RT_USING_UART2
     bool "Using RT_USING_UART2"
     default y    
-	
-endmenu
-
-
 
-    
-    
\ No newline at end of file

bsp/stm32f429-apollo/KConfig → bsp/stm32f429-apollo/Kconfig

@@ -20,7 +20,7 @@ config BOARD_STM32F429_APPOLO
     select ARCH_ARM_CORTEX_M4
     default y
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 source "$BSP_DIR/drivers/Kconfig"

bsp/stm32f429-disco/Kconfig

@@ -18,14 +18,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 source "$BSP_DIR/drivers/Kconfig"
 
-
-
-
-
-    
-    
\ No newline at end of file

bsp/stm32f4xx-HAL/KConfig → bsp/stm32f4xx-HAL/Kconfig

@@ -15,8 +15,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 
 choice
@@ -339,4 +339,4 @@ endif
 
 
     
-    
\ No newline at end of file
+    

bsp/stm32l476-nucleo/Kconfig

@@ -18,6 +18,6 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 source "$BSP_DIR/drivers/Kconfig"

bsp/tm4c129x/KConfig → bsp/tm4c129x/Kconfig

@@ -15,18 +15,10 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
-
-menu "BSP_SPECIAL CONFIG"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config RT_USING_UART0
     bool "Using RT_USING_UART0"
     default y    
-	
-endmenu
-
-
-
-    
-    
\ No newline at end of file
+ 

bsp/x1000/Kconfig

@@ -18,8 +18,8 @@ config $PKGS_DIR
     option env="PKGS_ROOT"
     default "packages"
 
-source "$RTT_DIR/KConfig"
-source "$PKGS_DIR/KConfig"
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
 
 config BOARD_X1000_REALBOARD
     bool 

components/KConfig → components/Kconfig

@@ -10,17 +10,17 @@ if RT_USING_COMPONENTS_INIT
         default y
 endif
 
-source "$RTT_DIR/components/cplusplus/KConfig"
+source "$RTT_DIR/components/cplusplus/Kconfig"
 
-source "$RTT_DIR/components/finsh/KConfig"
+source "$RTT_DIR/components/finsh/Kconfig"
 
-source "$RTT_DIR/components/dfs/KConfig"
+source "$RTT_DIR/components/dfs/Kconfig"
 
-source "$RTT_DIR/components/drivers/KConfig"
+source "$RTT_DIR/components/drivers/Kconfig"
 
-source "$RTT_DIR/components/libc/KConfig"
+source "$RTT_DIR/components/libc/Kconfig"
 
-source "$RTT_DIR/components/net/KConfig"
+source "$RTT_DIR/components/net/Kconfig"
 
 source "$RTT_DIR/components/gui/Kconfig"
 

components/net/KConfig → components/net/Kconfig

@@ -180,7 +180,7 @@ config RT_USING_LWIP
 
 endmenu
 
-source "$RTT_DIR/components/net/freemodbus/KConfig"
+source "$RTT_DIR/components/net/freemodbus/Kconfig"
 
 if RT_USING_LWIP
 config RT_USING_NETUTILS

tools/mkdist.py

@@ -121,7 +121,7 @@ def MakeCopy(program, BSP_ROOT, RTT_ROOT, Env):
     # copy tools directory
     print("=> tools")
     do_copy_folder(os.path.join(RTT_ROOT, "tools"), os.path.join(target_path, "tools"), ignore_patterns('*.pyc'))
-    do_copy_file(os.path.join(RTT_ROOT, 'KConfig'), os.path.join(target_path, 'KConfig'))
+    do_copy_file(os.path.join(RTT_ROOT, 'Kconfig'), os.path.join(target_path, 'Kconfig'))
     do_copy_file(os.path.join(RTT_ROOT, 'AUTHORS'), os.path.join(target_path, 'AUTHORS'))
     do_copy_file(os.path.join(RTT_ROOT, 'COPYING'), os.path.join(target_path, 'COPYING'))
     do_copy_file(os.path.join(RTT_ROOT, 'README.md'), os.path.join(target_path, 'README.md'))
@@ -170,7 +170,7 @@ def MakeCopyHeader(program, BSP_ROOT, RTT_ROOT, Env):
     # copy tools directory
     print "=>  tools"
     do_copy_folder(os.path.join(RTT_ROOT, "tools"), os.path.join(target_path, "tools"), ignore_patterns('*.pyc'))
-    do_copy_file(os.path.join(RTT_ROOT, 'KConfig'), os.path.join(target_path, 'KConfig'))
+    do_copy_file(os.path.join(RTT_ROOT, 'Kconfig'), os.path.join(target_path, 'Kconfig'))
     do_copy_file(os.path.join(RTT_ROOT, 'AUTHORS'), os.path.join(target_path, 'AUTHORS'))
     do_copy_file(os.path.join(RTT_ROOT, 'COPYING'), os.path.join(target_path, 'COPYING'))
     do_copy_file(os.path.join(RTT_ROOT, 'README.md'), os.path.join(target_path, 'README.md'))
@@ -242,7 +242,7 @@ def MkDist(program, BSP_ROOT, RTT_ROOT, Env):
     # copy tools directory
     print("=> tools")
     do_copy_folder(os.path.join(RTT_ROOT, "tools"), os.path.join(target_path, "tools"), ignore_patterns('*.pyc'))
-    do_copy_file(os.path.join(RTT_ROOT, 'KConfig'), os.path.join(target_path, 'KConfig'))
+    do_copy_file(os.path.join(RTT_ROOT, 'Kconfig'), os.path.join(target_path, 'Kconfig'))
     do_copy_file(os.path.join(RTT_ROOT, 'AUTHORS'), os.path.join(target_path, 'AUTHORS'))
     do_copy_file(os.path.join(RTT_ROOT, 'COPYING'), os.path.join(target_path, 'COPYING'))
     do_copy_file(os.path.join(RTT_ROOT, 'README.md'), os.path.join(target_path, 'README.md'))
@@ -265,7 +265,7 @@ def MkDist(program, BSP_ROOT, RTT_ROOT, Env):
     except :
         print('')
 
-    # change RTT_ROOT in KConfig
+    # change RTT_ROOT in Kconfig
     try:
         if os.path.exists(os.path.join(BSP_ROOT, 'Kconfig')):
             Kconfig = file(os.path.join(BSP_ROOT, 'Kconfig'))