[bsp][bluetrum] only keep uart driver open

bsp/bluetrum/ab32vg1-ab-prougen/.config

@@ -114,8 +114,16 @@ CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
 CONFIG_DFS_FD_MAX=16
 # CONFIG_RT_USING_DFS_MNTTABLE is not set
 # CONFIG_RT_USING_DFS_ELMFAT is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_0 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_1 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_2 is not set
+# CONFIG_RT_DFS_ELM_LFN_UNICODE_3 is not set
 # CONFIG_RT_USING_DFS_DEVFS is not set
-CONFIG_RT_USING_DFS_ROMFS=y
+# CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_DFS_UFFS is not set
 # CONFIG_RT_USING_DFS_JFFS2 is not set
@@ -145,10 +153,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
-CONFIG_RT_USING_AUDIO=y
-CONFIG_RT_AUDIO_REPLAY_MP_BLOCK_SIZE=1024
-CONFIG_RT_AUDIO_REPLAY_MP_BLOCK_COUNT=2
-CONFIG_RT_AUDIO_RECORD_PIPE_SIZE=512
+# CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
 # CONFIG_RT_USING_HWCRYPTO is not set
@@ -328,6 +333,8 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
 # CONFIG_PKG_USING_COREMARK is not set
 # CONFIG_PKG_USING_DHRYSTONE is not set
@@ -343,6 +350,8 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_CPU_USAGE is not set
 # CONFIG_PKG_USING_GBK2UTF8 is not set
 # CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
 
 #
 # system packages
@@ -382,6 +391,10 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_PPOOL is not set
 # CONFIG_PKG_USING_OPENAMP is not set
 # CONFIG_PKG_USING_RT_PRINTF is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
 
 #
 # peripheral libraries and drivers
@@ -390,6 +403,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -442,6 +456,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_NES is not set
 # CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
 # CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
 
 #
 # miscellaneous packages
@@ -491,6 +506,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_TETRIS is not set
 # CONFIG_PKG_USING_LWGPS is not set
 # CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
 
 #
 # Hardware Drivers Config
@@ -500,8 +516,7 @@ CONFIG_RT_USING_LIBC=y
 # Onboard Peripheral Drivers
 #
 CONFIG_BSP_USING_USB_TO_USART=y
-CONFIG_BSP_USING_AUDIO=y
-CONFIG_BSP_USING_AUDIO_PLAY=y
+# CONFIG_BSP_USING_AUDIO is not set
 # CONFIG_BSP_USING_SDCARD is not set
 
 #
@@ -509,10 +524,9 @@ CONFIG_BSP_USING_AUDIO_PLAY=y
 #
 CONFIG_BSP_USING_UART0=y
 # CONFIG_BSP_USING_SDIO is not set
-
-#
-# On-chip Peripheral Drivers
-#
+# CONFIG_BSP_USING_I2C1 is not set
+# CONFIG_BSP_USING_WDT is not set
+# CONFIG_BSP_USING_TIM is not set
 
 #
 # Board extended module Drivers

bsp/bluetrum/ab32vg1-ab-prougen/board/Kconfig

@@ -47,6 +47,55 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_DFS_ELMFAT
         default n
 
+    menuconfig BSP_USING_I2C1
+        bool "Enable I2C1 BUS (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C1
+            comment "Notice: PE3 --> 16; PE2 --> 15"
+            config BSP_I2C1_SCL_PIN
+                int "I2C1 scl pin number"
+                range 1 27
+                default 16
+            config BSP_I2C1_SDA_PIN
+                int "I2C1 sda pin number"
+                range 1 27
+                default 15
+        endif
+
+    config BSP_USING_WDT
+        bool "Enable Watchdog Timer"
+        select RT_USING_WDT
+        default n
+
+    menuconfig BSP_USING_TIM
+        bool "Enable timer"
+        default n
+        select RT_USING_HWTIMER
+        if BSP_USING_TIM
+            config BSP_USING_TIM1
+                bool "Enable TIM1"
+                default n
+
+            config BSP_USING_TIM2
+                bool "Enable TIM2"
+                default n
+
+            config BSP_USING_TIM3
+                bool "Enable TIM3"
+                default n
+
+            config BSP_USING_TIM4
+                bool "Enable TIM4"
+                default n
+                
+            config BSP_USING_TIM5
+                bool "Enable TIM5"
+                default n
+        endif
+
 endmenu
 
 menu "Board extended module Drivers"

bsp/bluetrum/ab32vg1-ab-prougen/rtconfig.h

@@ -77,7 +77,6 @@
 #define DFS_FILESYSTEMS_MAX 2
 #define DFS_FILESYSTEM_TYPES_MAX 2
 #define DFS_FD_MAX 16
-#define RT_USING_DFS_ROMFS
 
 /* Device Drivers */
 
@@ -86,10 +85,6 @@
 #define RT_USING_SERIAL
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
-#define RT_USING_AUDIO
-#define RT_AUDIO_REPLAY_MP_BLOCK_SIZE 1024
-#define RT_AUDIO_REPLAY_MP_BLOCK_COUNT 2
-#define RT_AUDIO_RECORD_PIPE_SIZE 512
 
 /* Using USB */
 
@@ -169,15 +164,11 @@
 /* Onboard Peripheral Drivers */
 
 #define BSP_USING_USB_TO_USART
-#define BSP_USING_AUDIO
-#define BSP_USING_AUDIO_PLAY
 
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_UART0
 
-/* On-chip Peripheral Drivers */
-
 /* Board extended module Drivers */
 
 #define BOARD_BLUETRUM_EVB

bsp/bluetrum/libraries/hal_drivers/drv_hwtimer.c

@@ -18,19 +18,6 @@
 
 #ifdef RT_USING_HWTIMER
 
-#define TIM_ENABLE                          BIT(0)
-#define TIM_CAPTURE_ENABLE
-#define TIM_INCREASE_CLOCK_SELECT
-#define TIM_CAPTURE_EDGE_SELECT
-#define TIM_INCREASE_SOURCE_SELECT
-#define TIM_OVERFLOW_INTERRUPT_ENABLE
-#define TIM_CAPTURE_INTERRUPT_ENABLE
-#define TIM_PWM0_ENABLE
-#define TIM_PWM1_ENABLE
-#define TIM_PWM2_ENABLE
-#define TIM_OVERFLOW_PEND
-#define TIM_CAPTURE_PEND
-
 enum
 {
 #ifdef BSP_USING_TIM1