unary.cc 44.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14
/* Copyright (c) 2021 PaddlePaddle Authors. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */

15
#include "paddle/phi/infermeta/unary.h"
16

L
Linjie Chen 已提交
17
#include <algorithm>
18
#include <set>
W
WJJ1995 已提交
19

20
#include "paddle/fluid/framework/convert_utils.h"
21
#include "paddle/phi/common/data_type.h"
22
#include "paddle/phi/common/type_traits.h"
23
#include "paddle/phi/core/enforce.h"
24
#include "paddle/phi/core/infermeta_utils.h"
25
#include "paddle/phi/kernels/funcs/unfold_functor.h"
26

27
namespace phi {
28

L
Linjie Chen 已提交
29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
void ArgsortInferMeta(const MetaTensor& input,
                      int axis,
                      bool descending,
                      MetaTensor* output,
                      MetaTensor* indices) {
  auto in_dims = input.dims();
  auto num_dims = in_dims.size();
  PADDLE_ENFORCE_GE(
      axis,
      -num_dims,
      phi::errors::InvalidArgument("'axis'(%d) must be greater than or equal to"
                                   " -num_dims(%d).",
                                   axis,
                                   -num_dims));
  PADDLE_ENFORCE_LT(
      axis,
      num_dims,
      phi::errors::InvalidArgument(
          "'axis'(%d) must be less than num_dims(%d).", axis, num_dims));

  output->share_dims(input);
  output->set_dtype(input.dtype());
  indices->share_dims(input);
  indices->set_dtype(DataType::INT64);
  output->share_lod(input);
  indices->share_lod(input);
}

57 58
void UnchangedInferMeta(const MetaTensor& x, MetaTensor* out) {
  out->share_meta(x);
59 60
}

F
From00 已提交
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
// meta x -> out without change, check if axis in range [-Rank(x), Rank(x)-1]
void UnchangedInferMetaCheckAxis(const MetaTensor& x,
                                 int axis,
                                 MetaTensor* out) {
  auto rank = x.dims().size();
  PADDLE_ENFORCE_GE(
      axis,
      -rank,
      errors::InvalidArgument(
          "Attr(axis) value should be in range [-R, R-1], "
          "R is the rank of Input(X). But received axis: %d, R: %d.",
          axis,
          rank));
  PADDLE_ENFORCE_LT(
      axis,
      rank,
      phi::errors::InvalidArgument(
          "Attr(axis) value should be in range [-R, R-1], "
          "R is the rank of Input(X). But received axis: %d, R: %d.",
          axis,
          rank));
  out->share_meta(x);
}

85 86 87 88 89 90
void RealAndImagInferMeta(const MetaTensor& x, MetaTensor* out) {
  out->set_dims(x.dims());
  out->set_dtype(dtype::ToReal(x.dtype()));
  out->set_layout(x.layout());
}

91 92 93 94 95
void FlattenInferMeta(const MetaTensor& x,
                      int start_axis,
                      int stop_axis,
                      MetaTensor* out) {
  auto x_dims = x.dims();
96 97 98 99 100 101 102
  int in_dims_size = x_dims.size();
  if (start_axis < 0) {
    start_axis = start_axis + in_dims_size;
  }
  if (stop_axis < 0) {
    stop_axis = stop_axis + in_dims_size;
  }
103 104 105 106 107
  PADDLE_ENFORCE_GE(
      stop_axis,
      start_axis,
      phi::errors::InvalidArgument("The stop_axis should be greater"
                                   "than or equal to start_axis."));
108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126

  int64_t outer = 1;
  std::vector<int32_t> out_shape;
  out_shape.reserve(in_dims_size - stop_axis + start_axis);

  for (int i = 0; i < start_axis; ++i) {
    out_shape.push_back(x_dims[i]);
  }
  for (int i = start_axis; i <= stop_axis; i++) {
    if (x_dims[i] == -1 || outer == -1) {
      outer = -1;
    } else {
      outer *= x_dims[i];
    }
  }
  out_shape.push_back(outer);
  for (int i = stop_axis + 1; i < in_dims_size; i++) {
    out_shape.push_back(x_dims[i]);
  }
127
  const auto& out_dims = phi::make_ddim(out_shape);
128 129 130
  out->set_dims(out_dims);
  out->set_dtype(x.dtype());
  out->set_layout(x.layout());
131

132
  if (x_dims[0] == out_dims[0]) {
133 134
    // Only pass LoD when the first dimension of output and Input(X)
    // are the same.
135
    out->share_lod(x);
136 137 138
  }
}

F
From00 已提交
139 140 141 142 143 144 145 146
void GumbelSoftmaxInferMeta(const MetaTensor& x,
                            float temperature,
                            bool hard,
                            int axis,
                            MetaTensor* out) {
  UnchangedInferMetaCheckAxis(x, axis, out);
}

147 148 149 150
void CastInferMeta(const MetaTensor& x, DataType out_dtype, MetaTensor* out) {
  out->set_dims(x.dims());
  out->set_dtype(out_dtype);
  out->set_layout(x.layout());
151 152
}

153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174
void CholeskyInferMeta(const MetaTensor& x, bool upper, MetaTensor* out) {
  auto dims = x.dims();
  auto rank = dims.size();
  PADDLE_ENFORCE_GE(rank,
                    2,
                    errors::InvalidArgument(
                        "The Input(X) should have at least 2 dimensions. But "
                        "received a %d dimension tensor.",
                        rank));
  PADDLE_ENFORCE_EQ(
      dims[rank - 2],
      dims[rank - 1],
      errors::InvalidArgument(
          "The inner-most 2 dimensions of Input(X) all should be symmetric "
          "positive-definite matrices and have the same size. But received "
          "X's shape[-2] = %d and shape[-1] = %d.",
          dims[rank - 2],
          dims[rank - 1]));
  out->set_dims(x.dims());
  out->set_dtype(x.dtype());
}

175 176 177 178 179 180 181
void CopyToInferMeta(const MetaTensor& x,
                     Backend backend,
                     bool blocking,
                     MetaTensor* out) {
  UnchangedInferMeta(x, out);
}

182
void CreateLikeInferMeta(const MetaTensor& x, DataType dtype, MetaTensor* out) {
183 184
  out->set_dims(x.dims());
  out->set_dtype(dtype == DataType::UNDEFINED ? x.dtype() : dtype);
185
  out->set_layout(x.layout());
186 187
}

188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205
void CumsumInferMeta(const MetaTensor& x,
                     int axis,
                     bool flatten,
                     bool exclusive,
                     bool reverse,
                     MetaTensor* out) {
  auto x_dims = x.dims();
  if (flatten) {
    out->set_dims(phi::make_ddim({phi::product(x_dims)}));
    out->set_dtype(x.dtype());
  } else {
    out->set_dims(x_dims);
    out->set_dtype(x.dtype());
  }

  out->share_lod(x);
}

206 207 208 209 210 211 212 213 214 215 216 217
void IncrementInferMeta(const MetaTensor& x, float value, MetaTensor* out) {
  PADDLE_ENFORCE_EQ(
      product(x.dims()),
      1UL,
      errors::InvalidArgument("The number of elements in Input(X) should be 1."
                              "Now the number is %d.",
                              product(x.dims())));
  out->set_dims(x.dims());
  out->share_lod(x);
  out->set_dtype(x.dtype());
}

218 219 220 221
static phi::DDim ValidateShape(const std::vector<int64_t> shape,
                               const phi::DDim& in_dims) {
  const int64_t in_size = phi::product(in_dims);
  auto in_dims_vec = phi::vectorize(in_dims);
222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237
  bool all_positive = std::all_of(in_dims_vec.cbegin(),
                                  in_dims_vec.cend(),
                                  [](int64_t i) { return i > 0; });
  // only one dimension can be set to -1, whose size will be automatically
  // infered.
  const int64_t unk_dim_val = -1;
  const int64_t copy_dim_val = 0;

  std::vector<int64_t> output_shape(shape.size(), 0);
  int64_t capacity = 1;
  int unk_dim_idx = -1;
  for (size_t i = 0; i < shape.size(); ++i) {
    if (shape[i] == unk_dim_val) {
      PADDLE_ENFORCE_EQ(
          unk_dim_idx,
          -1,
238
          phi::errors::InvalidArgument(
239 240
              "Only one dimension value of 'shape' in ReshapeOp can "
              "be -1. But received shape = [%s], shape[%d] is also -1.",
241
              phi::make_ddim(shape),
242 243 244 245 246 247
              i));
      unk_dim_idx = i;
    } else if (shape[i] == copy_dim_val) {
      PADDLE_ENFORCE_LT(
          static_cast<int>(i),
          in_dims.size(),
248
          phi::errors::InvalidArgument(
249 250 251 252
              "The index of 0 in `shape` must be less than "
              "the input tensor X's dimensions. "
              "But received shape = [%s], shape[%d] = 0, X's shape = [%s], "
              "X's dimensions = %d.",
253
              phi::make_ddim(shape),
254 255 256 257 258 259 260
              i,
              in_dims,
              in_dims.size()));
    } else {
      PADDLE_ENFORCE_GT(
          shape[i],
          0,
261
          phi::errors::InvalidArgument(
262 263 264
              "Each dimension value of 'shape' in ReshapeOp must not "
              "be negative except one unknown dimension. "
              "But received  shape = [%s], shape[%d] = %d.",
265
              phi::make_ddim(shape),
266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285
              i,
              shape[i]));
    }

    // NOTE all non-zero values will be converted to True (include negative
    // value)
    capacity *= (shape[i] ? shape[i] : in_dims[i]);
    output_shape[i] = (shape[i] ? static_cast<int64_t>(shape[i]) : in_dims[i]);
  }

  if (unk_dim_idx != -1) {
    if (all_positive) {
      // in_size < 0 and is un-determinate in compile time, skip the check,
      // for example, in_dims = [-1, 8, 1, 1], shape = [-1, 3, 8],
      // capacity = -24, in_size = -8, output_shape[0] = 0
      // the following check will fail.
      output_shape[unk_dim_idx] = -in_size / capacity;
      PADDLE_ENFORCE_EQ(
          output_shape[unk_dim_idx] * capacity,
          -in_size,
286
          phi::errors::InvalidArgument(
287 288 289 290 291 292 293
              "The 'shape' attribute in ReshapeOp is invalid. "
              "The input tensor X'size must be divisible by known "
              "capacity of 'shape'. "
              "But received X's shape = [%s], X's size = %d, "
              "'shape' is [%s], known capacity of 'shape' is %d.",
              in_dims,
              in_size,
294
              phi::make_ddim(shape),
295 296 297 298 299 300 301 302 303
              capacity));
    } else {
      output_shape[unk_dim_idx] = -1;
    }
  } else {
    if (all_positive) {
      PADDLE_ENFORCE_EQ(
          capacity,
          in_size,
304
          phi::errors::InvalidArgument(
305 306 307 308 309 310 311
              "The 'shape' in ReshapeOp is invalid. "
              "The input tensor X'size must be equal to the capacity of "
              "'shape'. "
              "But received X's shape = [%s], X's size = %d, 'shape' is "
              "[%s], the capacity of 'shape' is %d.",
              in_dims,
              in_size,
312
              phi::make_ddim(shape),
313 314 315 316 317 318 319 320 321 322 323
              capacity));
    }
  }

  // support reshape with zero-input(input tensor with product(shape) == 0)
  // by now we require that if the input tensor is zero shape, the target
  // shape of output must be zero
  if (in_size == 0) {
    PADDLE_ENFORCE_LE(
        capacity,
        in_size,
324
        phi::errors::InvalidArgument(
325 326 327 328 329 330
            "The 'shape' in ReshapeOp is invalid. "
            "The input tensor X's shape = [%s], X's capacity = %d."
            "But the target shape of Out is [%s],  the "
            "capacity of 'Out' is %d.",
            in_dims,
            in_size,
331
            phi::make_ddim(shape),
332 333 334
            capacity));
  }

335
  return phi::make_ddim(output_shape);
336 337
}

338 339 340
void InferMetaFromVecValue(const MetaTensor& x,
                           const std::vector<int64_t>& shape,
                           MetaTensor* out) {
341 342
  PADDLE_ENFORCE_EQ(!shape.empty(),
                    true,
343
                    phi::errors::InvalidArgument(
344 345
                        "The parameter 'shape' in ReshapeOp must be set. "
                        "But received 'shape' is empty."));
346
  auto x_dims = x.dims();
347
  auto out_dims = ValidateShape(shape, x_dims);
348 349 350 351
  out->set_dims(out_dims);
  out->set_dtype(x.dtype());
  out->set_layout(x.layout());
  if (x_dims[0] == out_dims[0]) {
352 353
    // Only pass LoD when the first dimension of output and Input(X)
    // are the same.
354
    out->share_lod(x);
355 356 357
  }
}

W
WJJ1995 已提交
358 359 360 361 362
void IsEmptyInferMeta(const MetaTensor& x, MetaTensor* out) {
  out->set_dims(phi::make_ddim({1}));
  out->set_dtype(DataType::BOOL);
}

363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397
void MultinomialInferMeta(const MetaTensor& x,
                          int num_samples,
                          bool replacement,
                          MetaTensor* out) {
  auto x_dim = x.dims();
  int64_t x_rank = x_dim.size();
  PADDLE_ENFORCE_GT(x_rank,
                    0,
                    errors::InvalidArgument(
                        "The number of dimensions of the input probability "
                        "distribution should be > 0, but got %d.",
                        x_rank));
  PADDLE_ENFORCE_LE(x_rank,
                    2,
                    errors::InvalidArgument(
                        "The number of dimensions of the input probability "
                        "distribution should be <= 2, but got %d.",
                        x_rank));

  std::vector<int64_t> out_dims(x_rank);
  for (int64_t i = 0; i < x_rank - 1; i++) {
    out_dims[i] = x_dim[i];
  }

  PADDLE_ENFORCE_GT(
      num_samples,
      0,
      errors::InvalidArgument(
          "The number of samples should be > 0, but got %d.", num_samples));
  out_dims[x_rank - 1] = num_samples;

  out->set_dims(make_ddim(out_dims));
  out->set_dtype(DataType::INT64);
}

398 399
void ReshapeInferMeta(const MetaTensor& x,
                      const ScalarArray& shape,
400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435
                      MetaTensor* out,
                      MetaConfig config) {
  auto& shape_data = shape.GetData();
  PADDLE_ENFORCE_NOT_NULL(out,
                          phi::errors::InvalidArgument(
                              "Output(Out) of ReshapeOp should not be null."));
  if (!config.is_runtime && shape.FromTensor()) {
    out->set_dims(phi::make_ddim(shape_data));
    out->share_lod(x);
    return;
  }
  PADDLE_ENFORCE_GT(shape_data.size(),
                    0,
                    phi::errors::InvalidArgument(
                        "The shape's size in ReshapeOp can't be zero."));
  InferMetaFromVecValue(x, shape_data, out);
}

void ReshapeWithXShapeInferMeta(const MetaTensor& x,
                                const ScalarArray& shape,
                                MetaTensor* xshape,
                                MetaTensor* out,
                                MetaConfig config) {
  PADDLE_ENFORCE_NOT_NULL(
      xshape,
      phi::errors::InvalidArgument(
          "Output(XShape) of ReshapeOp should not be null."));
  const auto& x_dims = x.dims();
  std::vector<int64_t> xshape_dims(x_dims.size() + 1);
  xshape_dims[0] = 0;
  for (int i = 0; i < x_dims.size(); ++i) {
    xshape_dims[i + 1] = x_dims[i];
  }
  xshape->set_dims(phi::make_ddim(xshape_dims));
  xshape->share_lod(x);
  ReshapeInferMeta(x, shape, out, config);
436 437
}

438
/*  Why not use SumRawInferMeta directly?
439 440
    Because we need make InferMetaFunction's args follow the design of api.yaml
*/
441 442 443 444 445
void SumInferMeta(const MetaTensor& x,
                  const std::vector<int64_t>& axis,
                  DataType dtype,
                  bool keep_dim,
                  MetaTensor* out) {
446
  bool reduce_all = false;
447
  SumRawInferMeta(x, axis, keep_dim, reduce_all, dtype, out);
448 449
}

450 451 452 453
DDim ReduceInferDim(const MetaTensor& x,
                    const std::vector<int64_t>& axis,
                    bool keep_dim,
                    bool reduce_all) {
454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483
  auto x_rank = x.dims().size();

  std::vector<int64_t> formated_axis = axis;
  for (size_t i = 0; i < axis.size(); ++i) {
    PADDLE_ENFORCE_LT(axis[i],
                      x_rank,
                      errors::InvalidArgument(
                          "The reduce dim index %d should be in the "
                          "range [-dimension(X), dimension(X)] "
                          "which dimesion = %d. But received dim index = %d.",
                          i,
                          x_rank,
                          axis[i]));
    PADDLE_ENFORCE_GE(axis[i],
                      -x_rank,
                      errors::InvalidArgument(
                          "The reduce dim index %d should be in the "
                          "range [-dimension(X), dimension(X)] "
                          "which dimesion = %d. But received dim index = %d.",
                          i,
                          x_rank,
                          axis[i]));

    if (axis[i] < 0) {
      formated_axis[i] = axis[i] + x_rank;
    }
  }

  bool full_dim = true;
  std::set<int64_t> dims_set(formated_axis.begin(), formated_axis.end());
484
  for (int64_t i = 0; i < x.dims().size(); ++i) {
485
    if (dims_set.find(i) == dims_set.end()) {
486
      full_dim = false;
487 488 489
      break;
    }
  }
490
  reduce_all = reduce_all || full_dim;
491 492 493

  std::vector<int64_t> out_dim_vector;
  if (keep_dim) {
494
    for (int64_t i = 0; i < x.dims().size(); ++i) {
495 496 497
      if (reduce_all || dims_set.find(i) != dims_set.end()) {
        out_dim_vector.push_back(1);
      } else {
498
        out_dim_vector.push_back(x.dims().at(i));
499 500 501
      }
    }
  } else {
502
    for (int64_t i = 0; i < x.dims().size(); ++i) {
503 504 505
      if (reduce_all || dims_set.find(i) != dims_set.end()) {
        continue;
      } else {
506
        out_dim_vector.push_back(x.dims().at(i));
507 508 509 510 511 512 513
      }
    }

    if (out_dim_vector.size() == 0) {
      out_dim_vector.push_back(1);
    }
  }
514
  DDim out_dim = phi::make_ddim(out_dim_vector);
515

516 517 518 519 520 521 522 523 524 525 526
  return out_dim;
}

void SumRawInferMeta(const MetaTensor& x,
                     const std::vector<int64_t>& axis,
                     bool keep_dim,
                     bool reduce_all,
                     DataType dtype,
                     MetaTensor* out) {
  DDim out_dim = ReduceInferDim(x, axis, keep_dim, reduce_all);

527 528 529 530
  DataType out_dtype;
  if (dtype != DataType::UNDEFINED) {
    out_dtype = dtype;
  } else {
531 532
    if (x.dtype() == DataType::BOOL || x.dtype() == DataType::INT32 ||
        x.dtype() == DataType::INT64) {
533 534
      out_dtype = DataType::INT64;
    } else {
535
      out_dtype = x.dtype();
536
    }
537 538
  }

539 540 541 542 543
  out->set_dims(out_dim);
  out->set_dtype(out_dtype);
  out->set_layout(x.layout());
}

544 545 546 547 548 549 550 551 552
void ReduceInferMetaBase(const MetaTensor& x,
                         const std::vector<int64_t>& axis,
                         bool keep_dim,
                         bool reduce_all,
                         MetaTensor* out) {
  DDim out_dim = ReduceInferDim(x, axis, keep_dim, reduce_all);
  out->set_dims(out_dim);
  out->set_dtype(x.dtype());
  out->set_layout(x.layout());
553 554
}

555 556 557 558
void ReduceInferMeta(const MetaTensor& x,
                     const std::vector<int64_t>& axis,
                     bool keep_dim,
                     MetaTensor* out) {
559
  bool reduce_all = false;
560
  ReduceInferMetaBase(x, axis, keep_dim, reduce_all, out);
561 562
}

563 564 565 566 567 568 569 570
void TransferLayoutInferMeta(const MetaTensor& x,
                             DataLayout layout,
                             MetaTensor* out) {
  out->set_dims(x.dims());
  out->set_dtype(x.dtype());
  out->set_layout(layout);
}

C
chentianyu03 已提交
571 572 573
void SplitInferMeta(const MetaTensor& x,
                    const ScalarArray& num_or_sections,
                    const Scalar& axis,
574
                    std::vector<MetaTensor*> out,
C
chentianyu03 已提交
575 576 577 578 579 580
                    MetaConfig config) {
  int axis_value = axis.to<int>();
  int rank = x.dims().size();
  PADDLE_ENFORCE_EQ(
      axis_value >= -rank && axis_value < rank,
      true,
581
      phi::errors::InvalidArgument(
C
chentianyu03 已提交
582 583 584 585 586 587 588 589 590 591
          "The axis is expected to be in range of [%d, %d), but got %d",
          -rank,
          rank,
          axis_value));
  if (axis_value < 0) {
    axis_value = axis_value + rank;
  }

  auto input_axis_dim = x.dims().at(axis_value);
  auto num_or_sections_data = num_or_sections.GetData();
592 593
  // step1: get formated sections
  std::vector<int64_t> sections;
C
chentianyu03 已提交
594 595
  // num_or_sections is a number
  if (num_or_sections_data.size() == 1) {
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610
    int num = num_or_sections_data.at(0);

    PADDLE_ENFORCE_EQ(input_axis_dim % num,
                      0,
                      phi::errors::InvalidArgument(
                          "The input's size along the split dimension "
                          "must be evenly divisible by Attr(num_or_sections). "
                          "But received Attr(num_or_sections) "
                          "= %d, input(X)'s shape = [%s], Attr(dim) = %d.",
                          num,
                          x.dims(),
                          axis_value));

    for (int i = 0; i < num; ++i) {
      sections.push_back(input_axis_dim / num);
C
chentianyu03 已提交
611 612 613 614 615 616 617 618 619
    }
  } else {
    // num_or_sections is a sections
    const int unknow_dim_val = -1;
    int unknow_dim_idx = -1;
    int num_of_unknow = 0;
    int sum_of_section = 0;

    for (size_t i = 0; i < num_or_sections_data.size(); ++i) {
620 621
      sections.push_back(num_or_sections_data[i]);

C
chentianyu03 已提交
622 623 624 625 626 627 628 629 630 631 632
      if (num_or_sections_data[i] == unknow_dim_val) {
        num_of_unknow++;
        unknow_dim_idx = i;
      } else {
        sum_of_section += num_or_sections_data[i];
      }
    }

    if (config.is_runtime) {
      PADDLE_ENFORCE_LE(num_of_unknow,
                        1,
633
                        phi::errors::InvalidArgument(
C
chentianyu03 已提交
634 635 636
                            "Only one dimension value of Attr(num_or_sections) "
                            "in SplitOp can be -1. "
                            "But received Attr(num_or_sections) = [%s].",
637
                            phi::make_ddim(num_or_sections_data)));
C
chentianyu03 已提交
638 639 640 641 642 643 644 645 646
    }

    if (unknow_dim_idx != -1) {
      // for example, input shape = [4 ,5], axis = 1, sections = [2, 3, -1].
      // input_axis_dim = 5, sum_of_sections = 5.
      // the following check will fail.
      PADDLE_ENFORCE_LT(
          sum_of_section,
          input_axis_dim,
647
          phi::errors::InvalidArgument(
C
chentianyu03 已提交
648 649 650 651 652
              "Sum of Attr(num_or_sections) other than unknown section "
              "must be less than the input's "
              "size "
              "along the split dimension. But received Attr(num_or_sections) "
              "= [%s], input(X)'s shape = [%s], Attr(dim) = %d.",
653
              phi::make_ddim(num_or_sections_data),
C
chentianyu03 已提交
654 655 656 657 658 659 660 661 662 663
              x.dims(),
              axis_value));

      if (config.is_runtime) {
        sections[unknow_dim_idx] = input_axis_dim - sum_of_section;
      }
    } else {
      PADDLE_ENFORCE_EQ(
          sum_of_section,
          input_axis_dim,
664
          phi::errors::InvalidArgument(
C
chentianyu03 已提交
665 666 667 668
              "Sum of Attr(num_or_sections) must be equal to the input's "
              "size "
              "along the split dimension. But received Attr(num_or_sections)"
              " = [%s], input(X)'s shape = [%s], Attr(dim) = %d.",
669
              phi::make_ddim(num_or_sections_data),
C
chentianyu03 已提交
670 671 672
              x.dims(),
              axis_value));
    }
673 674 675 676 677 678
  }

  // setp2: fill out dims
  std::vector<phi::DDim> out_dims(sections.size(), x.dims());
  if (config.is_runtime || input_axis_dim > 0) {
    for (size_t i = 0; i < sections.size(); ++i) {
C
chentianyu03 已提交
679 680
      out_dims[i][axis_value] = sections[i];
    }
681 682 683 684
  } else {
    for (size_t i = 0; i < sections.size(); ++i) {
      out_dims[i][axis_value] = -1;
    }
C
chentianyu03 已提交
685 686
  }

687
  for (size_t i = 0; i < sections.size(); ++i) {
C
chentianyu03 已提交
688 689
    if (axis_value != 0) {
      // Only pass LoD when not spliting along the first dim.
690 691 692
      out[i]->set_dtype(x.dtype());
      out[i]->set_dims(out_dims[i]);
      out[i]->set_layout(x.layout());
C
chentianyu03 已提交
693
    } else {
694 695 696 697
      out[i]->set_dtype(x.dtype());
      out[i]->set_dims(out_dims[i]);
      out[i]->set_layout(x.layout());
      out[i]->share_lod(x);
C
chentianyu03 已提交
698 699
    }
  }
C
Chen Weihang 已提交
700 701
}

L
Leo Chen 已提交
702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720
void UnbindInferMeta(const MetaTensor& x,
                     int axis,
                     std::vector<MetaTensor>* outs) {
  auto in_dims = x.dims();
  std::vector<int> out_dim;
  axis = axis < 0 ? in_dims.size() + axis : axis;
  for (int i = 0; i < in_dims.size(); ++i) {
    if (i != axis) out_dim.push_back(in_dims[i]);
  }
  auto out_dims = phi::make_ddim(out_dim);

  for (size_t i = 0; i < outs->size(); ++i) {
    (*outs)[i].set_dtype(x.dtype());
    (*outs)[i].set_dims(out_dims);
    (*outs)[i].set_layout(x.layout());
    (*outs)[i].share_lod(x);
  }
}

C
Chen Weihang 已提交
721 722 723 724 725 726
void TraceInferMeta(
    const MetaTensor& x, int offset, int axis1, int axis2, MetaTensor* out) {
  int dim1 = axis1;
  int dim2 = axis2;

  auto x_dims = x.dims();
C
chentianyu03 已提交
727

C
Chen Weihang 已提交
728 729 730 731 732 733
  int dim1_ = dim1 < 0 ? x_dims.size() + dim1 : dim1;
  int dim2_ = dim2 < 0 ? x_dims.size() + dim2 : dim2;

  PADDLE_ENFORCE_GE(
      x_dims.size(),
      2,
734
      phi::errors::OutOfRange(
C
Chen Weihang 已提交
735 736 737 738 739
          "Input's dim is out of range (expected at least 2, but got %ld).",
          x_dims.size()));
  PADDLE_ENFORCE_LT(
      dim1_,
      x_dims.size(),
740
      phi::errors::OutOfRange(
C
Chen Weihang 已提交
741 742 743 744 745 746 747 748
          "Attr(dim1) is out of range (expected to be in range of [%ld, "
          "%ld], but got %ld).",
          -(x_dims.size()),
          (x_dims.size() - 1),
          dim1));
  PADDLE_ENFORCE_LT(
      dim2_,
      x_dims.size(),
749
      phi::errors::OutOfRange(
C
Chen Weihang 已提交
750 751 752 753 754 755 756 757
          "Attr(dim2) is out of range (expected to be in range of [%ld, "
          "%ld], but got %ld).",
          -(x_dims.size()),
          (x_dims.size() - 1),
          dim2));
  PADDLE_ENFORCE_NE(
      dim1_,
      dim2_,
758 759 760 761
      phi::errors::InvalidArgument("The dimensions should not be identical "
                                   "%ld vs %ld.",
                                   dim1,
                                   dim2));
C
Chen Weihang 已提交
762 763 764 765 766 767 768 769 770

  auto sizes = vectorize(x_dims);
  if (x_dims.size() == 2) {
    sizes.clear();
    sizes.push_back(1);
  } else {
    sizes.erase(sizes.begin() + std::max(dim1_, dim2_));
    sizes.erase(sizes.begin() + std::min(dim1_, dim2_));
  }
771
  out->set_dims(phi::make_ddim(sizes));
C
chentianyu03 已提交
772 773
}

H
hong 已提交
774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848
void DiagonalInferMeta(const MetaTensor& input,
                       int offset,
                       int axis1,
                       int axis2,
                       MetaTensor* out) {
  auto x_dims = input.dims();
  int offset_ = offset;
  int axis1_ = axis1 < 0 ? x_dims.size() + axis1 : axis1;
  int axis2_ = axis2 < 0 ? x_dims.size() + axis2 : axis2;

  PADDLE_ENFORCE_GE(
      x_dims.size(),
      2,
      phi::errors::OutOfRange("Input's dim is out of range (expected at "
                              "least 2 dimensions, but got %ld).",
                              x_dims.size()));
  PADDLE_ENFORCE_LT(
      axis1_,
      x_dims.size(),
      phi::errors::OutOfRange(
          "Attr(axis1) is out of range (expected to be in range of [%ld, "
          "%ld], but got %ld).",
          -(x_dims.size()),
          (x_dims.size() - 1),
          axis1));
  PADDLE_ENFORCE_LT(
      axis2_,
      x_dims.size(),
      phi::errors::OutOfRange(
          "Attr(axis2) is out of range (expected to be in range of [%ld, "
          "%ld], but got %ld).",
          -(x_dims.size()),
          (x_dims.size() - 1),
          axis2));
  PADDLE_ENFORCE_NE(
      axis1_,
      axis2_,
      phi::errors::InvalidArgument("The dimensions should not be identical "
                                   "%d vs %d.",
                                   axis1,
                                   axis2));

  auto out_dims = vectorize(x_dims);
  // from out_dims get the dim size of axis1_.
  auto axis1_size = out_dims[axis1_];
  auto axis2_size = out_dims[axis2_];
  // delete two dims by attr axis1 and axis2 from out_dims.
  /* example:
     out_dim = [2, 3, 4];
     axis1 = 0;
     axis2 = 1;
     according to the attr of axis1 and axis2, we get:
     out_dim = [4].
  */
  out_dims.erase(out_dims.begin() + std::max(axis1_, axis2_));
  out_dims.erase(out_dims.begin() + std::min(axis1_, axis2_));

  if (offset_ == 0) {
    out_dims.push_back(std::min(axis1_size, axis2_size));
  } else if (offset_ > 0) {
    if ((axis2_size - offset_) > 0) {
      out_dims.push_back(std::min(axis1_size, axis2_size - offset_));
    } else {
      out_dims.push_back(0);
    }
  } else {
    if ((axis1_size + offset_) > 0) {
      out_dims.push_back(std::min(axis1_size + offset_, axis2_size));
    } else {
      out_dims.push_back(0);
    }
  }
  out->set_dims(phi::make_ddim(out_dims));
}

849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006
void UnfoldInferMeta(const MetaTensor& x,
                     const std::vector<int>& kernel_sizes,
                     const std::vector<int>& strides,
                     const std::vector<int>& paddings,
                     const std::vector<int>& dilations,
                     MetaTensor* out,
                     MetaConfig config) {
  auto in_dims = x.dims();
  // Only [N, C, H, W] input supported now
  PADDLE_ENFORCE_EQ(
      in_dims.size(),
      4,
      phi::errors::InvalidArgument(
          "Input should be 4-D tensor of format [N, C, H, W], but get %u",
          in_dims.size()));
  PADDLE_ENFORCE_EQ(
      in_dims.size() - kernel_sizes.size(),
      2U,
      phi::errors::InvalidArgument(
          "The dims of X should be larger than that of kernel_sizes "
          "by a number of 2, due to the batch size and input channel dim. "
          "But recieved dims(X:%u) - dims(kernel_sizes:%u) != 2",
          in_dims.size(),
          kernel_sizes.size()));
  PADDLE_ENFORCE_EQ(
      strides.size(),
      kernel_sizes.size(),
      phi::errors::InvalidArgument(
          "The dims of strides should be the same with that of kernel_sizes. "
          "But recieved dims(strides: %u) != dims(kernel_sizes: %u).",
          strides.size(),
          kernel_sizes.size()));
  PADDLE_ENFORCE_EQ(
      paddings.size(),
      2 * strides.size(),
      phi::errors::InvalidArgument(
          "The dims of paddings should be 2 times of that of strides. "
          "But recieved dims(paddings: %u) != 2*dims(strides: %u).",
          paddings.size(),
          strides.size()));
  PADDLE_ENFORCE_EQ(
      strides.size(),
      dilations.size(),
      phi::errors::InvalidArgument(
          "The dims of strides should be the same with that of dilations. "
          "But recieved dims(strides: %u) != dims(dilations: %u).",
          strides.size(),
          dilations.size()));

  // check kernel_sizes
  PADDLE_ENFORCE_GT(kernel_sizes[0],
                    0,
                    phi::errors::InvalidArgument(
                        "The `kernel_sizes` should be greater than zero, "
                        "but recieved kernel_height: %d kernel_width: %d.",
                        kernel_sizes[0],
                        kernel_sizes[1]));
  PADDLE_ENFORCE_GT(kernel_sizes[1],
                    0,
                    phi::errors::InvalidArgument(
                        "The `kernel_sizes` should be greater than zero, "
                        "but recieved kernel_height: %d kernel_width: %d.",
                        kernel_sizes[0],
                        kernel_sizes[1]));
  // check strides
  PADDLE_ENFORCE_GT(strides[0],
                    0,
                    phi::errors::InvalidArgument(
                        "The `strides` should be greater than zero, "
                        "but recieved strides_height: %d strides_width: %d.",
                        strides[0],
                        strides[1]));
  PADDLE_ENFORCE_GT(strides[1],
                    0,
                    phi::errors::InvalidArgument(
                        "The `strides` should be greater than zero, "
                        "but recieved strides_height: %d strides_width: %d.",
                        strides[0],
                        strides[1]));
  // check dilations
  PADDLE_ENFORCE_GT(
      dilations[0],
      0,
      phi::errors::InvalidArgument(
          "The `dilations` should be greater than zero, "
          "but recieved dilations_height: %d dilations_width: %d.",
          dilations[0],
          dilations[1]));
  PADDLE_ENFORCE_GT(
      dilations[1],
      0,
      phi::errors::InvalidArgument(
          "The `dilations` should be greater than zero, "
          "but recieved dilations_height: %d dilations_width: %d.",
          dilations[0],
          dilations[1]));

  std::vector<int> out_dims;
  out_dims.push_back(in_dims[0]);
  int output_channels = in_dims[1] * kernel_sizes[0] * kernel_sizes[1];
  out_dims.push_back(output_channels);

  int output_height = phi::funcs::CalcOutputSize(in_dims[2],
                                                 kernel_sizes[0],
                                                 dilations[0],
                                                 paddings[0],
                                                 paddings[2],
                                                 strides[0]);
  int output_width = phi::funcs::CalcOutputSize(in_dims[3],
                                                kernel_sizes[1],
                                                dilations[1],
                                                paddings[1],
                                                paddings[3],
                                                strides[1]);
  if (config.is_runtime) {
    // only check output height and width in runtime
    PADDLE_ENFORCE_GT(
        output_height,
        0,
        phi::errors::InvalidArgument(
            "The sliding blocks calculated from input spatial size "
            "(%d, %d), kernel_sizes (%d, %d), strides (%d, %d), "
            "dilations (%d, %d), is (%d, %d), which should be a "
            "positive integer.",
            in_dims[2],
            in_dims[3],
            kernel_sizes[0],
            kernel_sizes[1],
            strides[0],
            strides[1],
            dilations[0],
            dilations[1],
            output_height,
            output_width));
    PADDLE_ENFORCE_GT(
        output_width,
        0,
        phi::errors::InvalidArgument(
            "The sliding blocks calculated from input spatial size "
            "(%d, %d), kernel_sizes (%d, %d), strides (%d, %d), "
            "dilations (%d, %d), is (%d, %d), which should be a "
            "positive integer.",
            in_dims[2],
            in_dims[3],
            kernel_sizes[0],
            kernel_sizes[1],
            strides[0],
            strides[1],
            dilations[0],
            dilations[1],
            output_height,
            output_width));
  }
  int output_col_length = output_height * output_width;
  out_dims.push_back(output_col_length);
  out->set_dims(phi::make_ddim(out_dims));
}

L
Linjie Chen 已提交
1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045
void DiagInferMeta(const MetaTensor& x,
                   int offset,
                   float padding_value,
                   MetaTensor* out) {
  auto x_dims = x.dims();

  if (x_dims.size() == 1UL) {
    int64_t size_ = x_dims[0] + std::abs(offset);
    out->set_dims({size_, size_});
    out->set_dtype(x.dtype());
  } else if (x_dims.size() == 2UL) {
    int64_t size_ = 0;
    if (offset >= 0) {
      // Note(LutaoChu): Do not use std::min here, otherwise the calculation
      // of `size_` will have unexpected result on Windows Python3.8
      if (x_dims[0] < x_dims[1] - offset) {
        size_ = x_dims[0];
      } else {
        size_ = x_dims[1] - offset;
      }
    } else {
      // Note(LutaoChu): Do not use std::min here, otherwise the calculation
      // of `size_` will have unexpected result on Windows Python3.8
      if (x_dims[0] + offset < x_dims[1]) {
        size_ = x_dims[0] + offset;
      } else {
        size_ = x_dims[1];
      }
    }
    out->set_dims({size_});
    out->set_dtype(x.dtype());
  } else {
    PADDLE_THROW(phi::errors::InvalidArgument(
        "The input tensor X's dimensions of DiagV2Op should be either 1 or "
        "2, but received %d.",
        x_dims.size()));
  }
}

1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121
void ArgMinMaxInferMeta(const MetaTensor& x,
                        int64_t axis,
                        bool keepdims,
                        bool flatten,
                        int dtype,
                        MetaTensor* out,
                        MetaConfig config) {
  const auto& x_dims = x.dims();

  PADDLE_ENFORCE_GE(
      axis,
      -x_dims.size(),
      phi::errors::InvalidArgument("'axis'(%d) must be greater than or equal to"
                                   " -Rank(X)(%d).",
                                   axis,
                                   -x_dims.size()));
  PADDLE_ENFORCE_LT(axis,
                    x_dims.size(),
                    phi::errors::InvalidArgument(
                        "'axis'(%d) must be less than Rank(X)(%d) of Input(X).",
                        axis,
                        x_dims.size()));

  PADDLE_ENFORCE_EQ(
      (dtype < 0 || dtype == 2 || dtype == 3),
      true,
      phi::errors::InvalidArgument(
          "The attribute of dtype in argmin/argmax must be [%s] or [%s], but "
          "received [%s]",
          paddle::framework::DataTypeToString(
              paddle::framework::proto::VarType::INT32),
          paddle::framework::DataTypeToString(
              paddle::framework::proto::VarType::INT64),
          paddle::framework::DataTypeToString(
              static_cast<paddle::framework::proto::VarType::Type>(dtype))));

  auto x_rank = x_dims.size();
  if (axis < 0) axis += x_rank;
  if (config.is_runtime) {
    if (dtype == paddle::framework::proto::VarType::INT32) {
      int64_t all_element_num = 0;
      if (flatten) {
        all_element_num = phi::product(x_dims);

      } else {
        all_element_num = x_dims[axis];
      }
      PADDLE_ENFORCE_LE(
          all_element_num,
          INT_MAX,
          phi::errors::InvalidArgument(
              "The element num of the argmin/argmax input at axis is "
              "%d, is larger than int32 maximum value:%d, you must "
              "set the dtype of argmin/argmax to 'int64'.",
              all_element_num,
              INT_MAX));
    }
  }
  std::vector<int64_t> vec;
  if (flatten) {
    vec.emplace_back(static_cast<int64_t>(1));
  } else {
    for (int64_t i = 0; i < axis; i++) vec.emplace_back(x_dims[i]);
    if (keepdims) {
      vec.emplace_back(static_cast<int64_t>(1));
    }
    for (int64_t i = axis + 1; i < x_rank; i++) vec.emplace_back(x_dims[i]);
  }
  out->set_dims(phi::make_ddim(vec));
  if (dtype == 2) {
    out->set_dtype(DataType::INT32);
  } else if (dtype == 3) {
    out->set_dtype(DataType::INT64);
  }
}

1122 1123 1124 1125 1126
void SizeInferMeta(const MetaTensor& input, MetaTensor* out) {
  out->set_dtype(DataType::INT64);
  out->set_dims({1});
}

1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167
void PadInferMeta(const MetaTensor& input,
                  const std::vector<int>& paddings,
                  float pad_value,
                  MetaTensor* out,
                  MetaConfig config) {
  auto x_dim = input.dims();
  PADDLE_ENFORCE_EQ(
      static_cast<int>(paddings.size()),
      x_dim.size() * 2,
      phi::errors::InvalidArgument(
          "Size of 'paddings' dimension should be equal to 2 * size of "
          "Input(X)'s dimension, but received (size of 'paddings' dimension "
          "is) %d vs (2 * size of Input(X)'s dimension is) %d.",
          static_cast<int>(paddings.size()),
          x_dim.size() * 2));
  for (size_t i = 0; i < paddings.size(); ++i) {
    PADDLE_ENFORCE_GE(paddings[i],
                      0,
                      phi::errors::InvalidArgument(
                          "The element of 'paddings' should >= 0, but "
                          "received %d for index %d.",
                          paddings[i],
                          static_cast<int>(i)));
  }
  std::vector<int64_t> out_dims(x_dim.size());
  for (int i = 0; i < x_dim.size(); ++i) {
    if ((!config.is_runtime) && (x_dim[i] == -1)) {
      out_dims[i] = -1;
    } else {
      out_dims[i] = x_dim[i] + paddings[i * 2] + paddings[i * 2 + 1];
    }
  }
  out->set_dims(phi::make_ddim(out_dims));
  if (out_dims[0] == x_dim[0]) {
    // Only pass LoD when the first dimension is equal between
    // output and input.
    out->share_lod(input);
  }
  out->set_dtype(input.dtype());
}

1168 1169 1170 1171 1172
void IsfiniteInferMeta(const MetaTensor& x, MetaTensor* out) {
  out->set_dims(x.dims());
  out->set_dtype(DataType::BOOL);
}

1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218
void PixelShuffleInferMeta(const MetaTensor& x,
                           int upscale_factor,
                           const std::string& data_format,
                           MetaTensor* out) {
  auto input_dims = x.dims();
  PADDLE_ENFORCE_EQ(input_dims.size(),
                    4,
                    phi::errors::InvalidArgument(
                        "Input should be a 4-D tensor of format [N, C, H, W] "
                        "or [N, H, W, C], but got %u.",
                        input_dims.size()));

  const bool channel_last = (data_format == "NHWC");

  if (!channel_last) {
    PADDLE_ENFORCE_EQ(input_dims[1] % (upscale_factor * upscale_factor),
                      0,
                      phi::errors::InvalidArgument(
                          "The square of upscale_factor[%u] should divide the "
                          "number of channel[%u]",
                          upscale_factor * upscale_factor,
                          input_dims[1]));
  } else {
    PADDLE_ENFORCE_EQ(input_dims[3] % (upscale_factor * upscale_factor),
                      0,
                      phi::errors::InvalidArgument(
                          "The square of upscale_factor[%u] should divide the "
                          "number of channel[%u]",
                          upscale_factor * upscale_factor,
                          input_dims[3]));
  }
  auto output_dims = input_dims;
  output_dims[0] = input_dims[0];
  if (!channel_last) {
    output_dims[1] = input_dims[1] / (upscale_factor * upscale_factor);
    output_dims[2] = input_dims[2] * upscale_factor;
    output_dims[3] = input_dims[3] * upscale_factor;
  } else {
    output_dims[1] = input_dims[1] * upscale_factor;
    output_dims[2] = input_dims[2] * upscale_factor;
    output_dims[3] = input_dims[3] / (upscale_factor * upscale_factor);
  }
  out->set_dtype(x.dtype());
  out->set_dims(output_dims);
}

1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271
void TransposeInferMeta(const MetaTensor& x,
                        const std::vector<int>& axis,
                        MetaTensor* out) {
  auto x_dims = x.dims();
  size_t x_rank = x_dims.size();
  size_t axis_size = axis.size();

  PADDLE_ENFORCE_EQ(
      x_rank,
      axis_size,
      errors::InvalidArgument("The input tensor's dimension "
                              "should be equal to the axis's size. "
                              "But received input tensor's dimension is %d, "
                              "axis's size is %d",
                              x_rank,
                              axis_size));

  std::vector<int> count(axis_size, 0);
  for (size_t i = 0; i < axis_size; i++) {
    PADDLE_ENFORCE_GE(
        axis[i],
        0,
        errors::InvalidArgument("The axis should be greater than or equal to 0."
                                "But received %d of axis[%d]",
                                axis[i],
                                i));

    PADDLE_ENFORCE_EQ(
        axis[i] < static_cast<int>(axis_size) && ++count[axis[i]] == 1,
        true,
        errors::InvalidArgument(
            "Each element of Attribute axis should "
            "be a unique value range from 0 to (dims - 1), "
            "where the dims is the axis's size, "
            "unique value means this axis value can appear only once. "
            "But received axis[%d] is %d, axis_size is %d, "
            "count[axis[%d]] is %d",
            i,
            axis[i],
            axis_size,
            i,
            count[axis[i]]));
  }

  phi::DDim out_dims(x_dims);
  for (size_t i = 0; i < axis_size; ++i) {
    out_dims[i] = x_dims[axis[i]];
  }

  out->set_dims(out_dims);
  out->set_dtype(x.dtype());
}

1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303
void EighInferMeta(const MetaTensor& x,
                   const std::string& uplo,
                   MetaTensor* out_w,
                   MetaTensor* out_v) {
  auto input_dim = x.dims();
  auto rank = input_dim.size();

  PADDLE_ENFORCE_GE(rank,
                    2,
                    phi::errors::InvalidArgument(
                        "The Input(X) should have at least 2 dimensions."
                        "But received a %d dimension tensor.",
                        rank));
  PADDLE_ENFORCE_EQ(
      input_dim[rank - 2],
      input_dim[rank - 1],
      phi::errors::InvalidArgument(
          "Eigh op is designed for square matrix, consequently"
          "inner-most 2 dimensions of Input(X) should be symmetric."
          "But received X's shape[-2] = %d and shape[-1] = %d.",
          input_dim[rank - 2],
          input_dim[rank - 1]));

  std::vector<int64_t> values_dim;

  for (auto i = 0; i < rank - 1; i++) {
    values_dim.emplace_back(input_dim[i]);
  }
  out_w->set_dims(phi::make_ddim(values_dim));
  out_v->set_dims(input_dim);
}

1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314
void WhereIndexInferMeta(const MetaTensor& condition, MetaTensor* out) {
  auto rank = condition.dims().size();
  PADDLE_ENFORCE_GE(
      rank,
      1UL,
      phi::errors::InvalidArgument(
          "Input(Condition) should have number of dimension at least 1"));
  out->set_dims(phi::make_ddim({-1, rank}));
  out->set_dtype(DataType::INT64);
}

1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342
void ShardIndexInferMeta(const MetaTensor& in,
                         int index_num,
                         int nshards,
                         int shard_id,
                         int ignore_value,
                         MetaTensor* out,
                         MetaConfig config) {
  auto x_dims = in.dims();
  PADDLE_ENFORCE_GE(
      x_dims.size(),
      2,
      phi::errors::InvalidArgument("Rank of Input(X) should be at least 2, "
                                   "but the value given is %d.",
                                   x_dims.size()));
  if (config.is_runtime || x_dims[x_dims.size() - 1] > 0) {
    PADDLE_ENFORCE_EQ(x_dims[x_dims.size() - 1],
                      1U,
                      phi::errors::InvalidArgument(
                          "The last dimension of Input(X) should be 1, "
                          "but the value given is %d.",
                          x_dims[x_dims.size() - 1]));
  }

  out->set_dims(x_dims);
  out->share_lod(in);
  out->set_dtype(in.dtype());
}

1343
}  // namespace phi
1344

1345 1346
PD_REGISTER_INFER_META_FN(copy_to, phi::CopyToInferMeta);
PD_REGISTER_INFER_META_FN(split, phi::SplitInferMeta);