driver-platform-gpio-des.md

# GPIO<a name="EN-US_TOPIC_0000001206171135"></a>

-   [Overview](#section1635911016188)
-   [Available APIs](#section589913442203)
-   [Usage Guidelines](#section259614242196)
    -   [How to Use](#section103477714216)
    -   [Determining a GPIO Pin Number](#section370083272117)
    -   [Using APIs to Operate GPIO Pins](#section13604050132118)

-   [Usage Example](#section25941262111)

## Overview<a name="section1635911016188"></a>

Generally, a general-purpose input/output \(GPIO\) controller manages all GPIO pins by group. Each group of GPIO pins is associated with one or more registers. The GPIO pins are operated by reading data from and writing data to the registers.

The GPIO APIs define a set of standard functions for performing operations on GPIO pins, including:

-   Setting the pin direction, which can be input or output \(High impedance is not supported currently.\)

-   Reading and writing level values, which can be low or high
-   Setting an interrupt service routine \(ISR\) function and interrupt trigger mode for a pin
-   Enabling or disabling a pin interrupt

## Available APIs<a name="section589913442203"></a>

**Table  1**  APIs available for the GPIO driver

<a name="table89681075215"></a>
<table><thead align="left"><tr id="row996807162115"><th class="cellrowborder" valign="top" width="19.74%" id="mcps1.2.4.1.1"><p id="p296817716212"><a name="p296817716212"></a><a name="p296817716212"></a>Capability</p>
</th>
<th class="cellrowborder" valign="top" width="32.36%" id="mcps1.2.4.1.2"><p id="p596897172119"><a name="p596897172119"></a><a name="p596897172119"></a>Function</p>
</th>
<th class="cellrowborder" valign="top" width="47.9%" id="mcps1.2.4.1.3"><p id="p39681677213"><a name="p39681677213"></a><a name="p39681677213"></a>Description</p>
</th>
</tr>
</thead>
<tbody><tr id="row896847202113"><td class="cellrowborder" rowspan="2" valign="top" width="19.74%" headers="mcps1.2.4.1.1 "><p id="p1796814719210"><a name="p1796814719210"></a><a name="p1796814719210"></a>GPIO read/write</p>
</td>
<td class="cellrowborder" valign="top" width="32.36%" headers="mcps1.2.4.1.2 "><p id="p39683732112"><a name="p39683732112"></a><a name="p39683732112"></a>GpioRead</p>
</td>
<td class="cellrowborder" valign="top" width="47.9%" headers="mcps1.2.4.1.3 "><p id="p59687710219"><a name="p59687710219"></a><a name="p59687710219"></a>Reads the level value of a GPIO pin.</p>
</td>
</tr>
<tr id="row17968872212"><td class="cellrowborder" valign="top" headers="mcps1.2.4.1.1 "><p id="p396812722116"><a name="p396812722116"></a><a name="p396812722116"></a>GpioWrite</p>
</td>
<td class="cellrowborder" valign="top" headers="mcps1.2.4.1.2 "><p id="p396814715219"><a name="p396814715219"></a><a name="p396814715219"></a>Writes the level value of a GPIO pin.</p>
</td>
</tr>
<tr id="row129681576218"><td class="cellrowborder" rowspan="2" valign="top" width="19.74%" headers="mcps1.2.4.1.1 "><p id="p1496813782116"><a name="p1496813782116"></a><a name="p1496813782116"></a>GPIO settings</p>
</td>
<td class="cellrowborder" valign="top" width="32.36%" headers="mcps1.2.4.1.2 "><p id="p29688742119"><a name="p29688742119"></a><a name="p29688742119"></a>GpioSetDir</p>
</td>
<td class="cellrowborder" valign="top" width="47.9%" headers="mcps1.2.4.1.3 "><p id="p179682792111"><a name="p179682792111"></a><a name="p179682792111"></a>Sets the direction for a GPIO pin.</p>
</td>
</tr>
<tr id="row1196817715217"><td class="cellrowborder" valign="top" headers="mcps1.2.4.1.1 "><p id="p896827182120"><a name="p896827182120"></a><a name="p896827182120"></a>GpioGetDir</p>
</td>
<td class="cellrowborder" valign="top" headers="mcps1.2.4.1.2 "><p id="p39689792111"><a name="p39689792111"></a><a name="p39689792111"></a>Obtains the direction for a GPIO pin.</p>
</td>
</tr>
<tr id="row69682071217"><td class="cellrowborder" rowspan="4" valign="top" width="19.74%" headers="mcps1.2.4.1.1 "><p id="p296818714213"><a name="p296818714213"></a><a name="p296818714213"></a>GPIO interrupt settings</p>
</td>
<td class="cellrowborder" valign="top" width="32.36%" headers="mcps1.2.4.1.2 "><p id="p1396916710216"><a name="p1396916710216"></a><a name="p1396916710216"></a>GpioSetIrq</p>
</td>
<td class="cellrowborder" valign="top" width="47.9%" headers="mcps1.2.4.1.3 "><p id="p99693712113"><a name="p99693712113"></a><a name="p99693712113"></a>Sets the ISR function for a GPIO pin.</p>
</td>
</tr>
<tr id="row4969117172110"><td class="cellrowborder" valign="top" headers="mcps1.2.4.1.1 "><p id="p119692079215"><a name="p119692079215"></a><a name="p119692079215"></a>GpioUnSetIrq</p>
</td>
<td class="cellrowborder" valign="top" headers="mcps1.2.4.1.2 "><p id="p1996916792114"><a name="p1996916792114"></a><a name="p1996916792114"></a>Cancels the setting of the ISR function for a GPIO pin.</p>
</td>
</tr>
<tr id="row396907112117"><td class="cellrowborder" valign="top" headers="mcps1.2.4.1.1 "><p id="p109694717216"><a name="p109694717216"></a><a name="p109694717216"></a>GpioEnableIrq</p>
</td>
<td class="cellrowborder" valign="top" headers="mcps1.2.4.1.2 "><p id="p2969473216"><a name="p2969473216"></a><a name="p2969473216"></a>Enables a GPIO interrupt.</p>
</td>
</tr>
<tr id="row14969117152113"><td class="cellrowborder" valign="top" headers="mcps1.2.4.1.1 "><p id="p18969157182116"><a name="p18969157182116"></a><a name="p18969157182116"></a>GpioDisableIrq</p>
</td>
<td class="cellrowborder" valign="top" headers="mcps1.2.4.1.2 "><p id="p19690710214"><a name="p19690710214"></a><a name="p19690710214"></a>Disables a GPIO interrupt.</p>
</td>
</tr>
</tbody>
</table>

>![](../public_sys-resources/icon-note.gif) **NOTE:** 
>All functions provided in this document can be called only in kernel mode.

## Usage Guidelines<a name="section259614242196"></a>

### How to Use<a name="section103477714216"></a>

The GPIO APIs use the GPIO pin number to specify a pin.  [Figure 1](#fig16151101653713)  shows the general process of using a GPIO.

**Figure  1**  Process of using a GPIO<a name="fig16151101653713"></a>  
![](figures/process-of-using-a-gpio.png "process-of-using-a-gpio")

### Determining a GPIO Pin Number<a name="section370083272117"></a>

The method for converting GPIO pin numbers varies according to the GPIO controller model, parameters, and controller driver of different system on chips \(SoCs\).

-   Hi3516DV300

    A controller manages 12 groups of GPIO pins. Each group contains 8 GPIO pins.

    GPIO pin number = GPIO group index \(0–11\) x Number of GPIO pins in each group \(8\) + Offset in the group

    Example: GPIO number of GPIO10\_3 = 10 x 8 + 3 = 83

-   Hi3518EV300

    A controller manages 10 groups of GPIO pins. Each group contains 10 GPIO pins.

    GPIO pin number = GPIO group index \(0–9\) x Number of GPIO pins in each group \(10\) + Offset in the group

    Example: GPIO pin number of GPIO7\_3 = 7 x 10 + 3 = 73


### Using APIs to Operate GPIO Pins<a name="section13604050132118"></a>

-   Set the direction for a GPIO pin.

    Before performing read/write operations on a GPIO pin, call the following function to set the direction:

    int32\_t GpioSetDir\(uint16\_t gpio, uint16\_t dir\);

    **Table  2**  Description of GpioSetDir

    <a name="table63111557616"></a>
    <table><tbody><tr id="row17311165469"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p53110515616"><a name="p53110515616"></a><a name="p53110515616"></a><strong id="b1142022718160"><a name="b1142022718160"></a><a name="b1142022718160"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p5311454616"><a name="p5311454616"></a><a name="p5311454616"></a><strong id="b93161228141614"><a name="b93161228141614"></a><a name="b93161228141614"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row0312151666"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1431265763"><a name="p1431265763"></a><a name="p1431265763"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p83121553613"><a name="p83121553613"></a><a name="p83121553613"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row11312151619"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p173121451664"><a name="p173121451664"></a><a name="p173121451664"></a>dir</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p153122520615"><a name="p153122520615"></a><a name="p153122520615"></a>Direction to set.</p>
    </td>
    </tr>
    <tr id="row165937126386"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p83111453613"><a name="p83111453613"></a><a name="p83111453613"></a><strong id="b42491732121614"><a name="b42491732121614"></a><a name="b42491732121614"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p83111151165"><a name="p83111151165"></a><a name="p83111151165"></a><strong id="b1116336166"><a name="b1116336166"></a><a name="b1116336166"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row205931212123817"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p18312151463"><a name="p18312151463"></a><a name="p18312151463"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p103124517618"><a name="p103124517618"></a><a name="p103124517618"></a>Succeeded in setting the direction for a GPIO pin.</p>
    </td>
    </tr>
    <tr id="row75931212153818"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p23121951261"><a name="p23121951261"></a><a name="p23121951261"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p153121553610"><a name="p153121553610"></a><a name="p153121553610"></a>Failed to set the direction for a GPIO pin.</p>
    </td>
    </tr>
    </tbody>
    </table>


-   Read or write the level value for a GPIO pin.

    To read the level value of a GPIO pin, call the following function:

    int32\_t GpioRead\(uint16\_t gpio, uint16\_t \*val\);

    **Table  3**  Description of GpioRead

    <a name="table20347743174816"></a>
    <table><tbody><tr id="row17348144394816"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p19348164313481"><a name="p19348164313481"></a><a name="p19348164313481"></a><strong id="b4862227121610"><a name="b4862227121610"></a><a name="b4862227121610"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p134810432488"><a name="p134810432488"></a><a name="p134810432488"></a><strong id="b677332841611"><a name="b677332841611"></a><a name="b677332841611"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row134874324814"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p183481437485"><a name="p183481437485"></a><a name="p183481437485"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p43481043194819"><a name="p43481043194819"></a><a name="p43481043194819"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row20348343144815"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1534864310480"><a name="p1534864310480"></a><a name="p1534864310480"></a>val</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p13689159154815"><a name="p13689159154815"></a><a name="p13689159154815"></a>Pointer to the level value.</p>
    </td>
    </tr>
    <tr id="row19348043154813"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1234812431480"><a name="p1234812431480"></a><a name="p1234812431480"></a><strong id="b10599632101619"><a name="b10599632101619"></a><a name="b10599632101619"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p434894334814"><a name="p434894334814"></a><a name="p434894334814"></a><strong id="b236513361617"><a name="b236513361617"></a><a name="b236513361617"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row3348184311486"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1934854315487"><a name="p1934854315487"></a><a name="p1934854315487"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p103481943114814"><a name="p103481943114814"></a><a name="p103481943114814"></a>Succeeded in reading the level value.</p>
    </td>
    </tr>
    <tr id="row23485436482"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1134834310486"><a name="p1134834310486"></a><a name="p1134834310486"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p93491343144815"><a name="p93491343144815"></a><a name="p93491343144815"></a>Failed to read the level value.</p>
    </td>
    </tr>
    </tbody>
    </table>

    To write the level value for a GPIO pin, call the following function:

    int32\_t GpioWrite\(uint16\_t gpio, uint16\_t val\);

    **Table  4**  Description of GpioWrite

    <a name="table1214911207520"></a>
    <table><tbody><tr id="row6149720175218"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p18149132005216"><a name="p18149132005216"></a><a name="p18149132005216"></a><strong id="b19864427181615"><a name="b19864427181615"></a><a name="b19864427181615"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p16149220145216"><a name="p16149220145216"></a><a name="p16149220145216"></a><strong id="b4774132861616"><a name="b4774132861616"></a><a name="b4774132861616"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row16149102014526"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p31495206527"><a name="p31495206527"></a><a name="p31495206527"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p1014972085212"><a name="p1014972085212"></a><a name="p1014972085212"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row3149112095214"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p1815072011528"><a name="p1815072011528"></a><a name="p1815072011528"></a>val</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p1931618337524"><a name="p1931618337524"></a><a name="p1931618337524"></a>Level value to write.</p>
    </td>
    </tr>
    <tr id="row1115062015220"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p10150172015218"><a name="p10150172015218"></a><a name="p10150172015218"></a><strong id="b760183221611"><a name="b760183221611"></a><a name="b760183221611"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p1150192015527"><a name="p1150192015527"></a><a name="p1150192015527"></a><strong id="b14366123310160"><a name="b14366123310160"></a><a name="b14366123310160"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row111503202526"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p171501320205216"><a name="p171501320205216"></a><a name="p171501320205216"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p15150102017522"><a name="p15150102017522"></a><a name="p15150102017522"></a>Succeeded in writing the level value.</p>
    </td>
    </tr>
    <tr id="row1615002018528"><td class="cellrowborder" valign="top" width="48.120000000000005%"><p id="p15150182045212"><a name="p15150182045212"></a><a name="p15150182045212"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.88%"><p id="p13150320105212"><a name="p13150320105212"></a><a name="p13150320105212"></a>Failed to write the level value.</p>
    </td>
    </tr>
    </tbody>
    </table>

    Example:

    ```
    int32_t ret;
    uint16_t val;
    /* Set the output direction for GPIO3. */
    ret = GpioSetDir(3, GPIO_DIR_OUT);
    if (ret != 0) {
        HDF_LOGE("GpioSerDir: failed, ret %d\n", ret);
        return;
    }
    /* Write the low level GPIO_VAL_LOW for GPIO3. */
    ret = GpioWrite(3, GPIO_VAL_LOW);
    if (ret != 0) {
        HDF_LOGE("GpioWrite: failed, ret %d\n", ret);
        return;
    }
    /* Set the input direction for GPIO6. */
    ret = GpioSetDir(6, GPIO_DIR_IN);
    if (ret != 0) {
        HDF_LOGE("GpioSetDir: failed, ret %d\n", ret);
        return;
    }
    /* Read the level value of GPIO6. */
    ret = GpioRead(6, &val);
    ```


-   Set the ISR function for a GPIO pin.

    To set the ISR function for a GPIO pin, call the following function:

    int32\_t GpioSetIrq\(uint16\_t gpio, uint16\_t mode, GpioIrqFunc func, void \*arg\);

    **Table  5**  Description of GpioSetIrq

    <a name="table16804111812466"></a>
    <table><tbody><tr id="row880401834615"><td class="cellrowborder" valign="top" width="48.54%"><p id="p380491819469"><a name="p380491819469"></a><a name="p380491819469"></a><strong id="b0865192761614"><a name="b0865192761614"></a><a name="b0865192761614"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p48041318114619"><a name="p48041318114619"></a><a name="p48041318114619"></a><strong id="b1477520282162"><a name="b1477520282162"></a><a name="b1477520282162"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row19805181812465"><td class="cellrowborder" valign="top" width="48.54%"><p id="p11805101874611"><a name="p11805101874611"></a><a name="p11805101874611"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p6805181818461"><a name="p6805181818461"></a><a name="p6805181818461"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row1080541817469"><td class="cellrowborder" valign="top" width="48.54%"><p id="p580541864611"><a name="p580541864611"></a><a name="p580541864611"></a>mode</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p380511180463"><a name="p380511180463"></a><a name="p380511180463"></a>Interrupt trigger mode.</p>
    </td>
    </tr>
    <tr id="row83541951134617"><td class="cellrowborder" valign="top" width="48.54%"><p id="p5355351104610"><a name="p5355351104610"></a><a name="p5355351104610"></a>func</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p11355551174619"><a name="p11355551174619"></a><a name="p11355551174619"></a>ISR function to set.</p>
    </td>
    </tr>
    <tr id="row6593577469"><td class="cellrowborder" valign="top" width="48.54%"><p id="p165985724619"><a name="p165985724619"></a><a name="p165985724619"></a>arg</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p559185784619"><a name="p559185784619"></a><a name="p559185784619"></a>Pointer to the parameters passed to the ISR function.</p>
    </td>
    </tr>
    <tr id="row16299193210587"><td class="cellrowborder" valign="top" width="48.54%"><p id="p7804101884614"><a name="p7804101884614"></a><a name="p7804101884614"></a><strong id="b126021932131615"><a name="b126021932131615"></a><a name="b126021932131615"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p680441818466"><a name="p680441818466"></a><a name="p680441818466"></a><strong id="b836716339162"><a name="b836716339162"></a><a name="b836716339162"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row12299632125817"><td class="cellrowborder" valign="top" width="48.54%"><p id="p1180511189465"><a name="p1180511189465"></a><a name="p1180511189465"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p180521812465"><a name="p180521812465"></a><a name="p180521812465"></a>Succeeded in setting the ISR function for a GPIO pin.</p>
    </td>
    </tr>
    <tr id="row029833235815"><td class="cellrowborder" valign="top" width="48.54%"><p id="p1080591814468"><a name="p1080591814468"></a><a name="p1080591814468"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p18805141884611"><a name="p18805141884611"></a><a name="p18805141884611"></a>Failed to set the ISR function for a GPIO pin.</p>
    </td>
    </tr>
    </tbody>
    </table>

    >![](../public_sys-resources/icon-caution.gif) **CAUTION:** 
    >Only one ISR function can be set for a GPIO pin at a time. If  **GpioSetIrq**  is called repeatedly, the previous IRS function will be replaced.

    If the ISR function is no longer required, call the following function to cancel the setting:

    int32\_t GpioUnSetIrq\(uint16\_t gpio\);

    **Table  6**  Description of GpioUnSetIrq

    <a name="table1157224664316"></a>
    <table><tbody><tr id="row175721546174317"><td class="cellrowborder" valign="top" width="48.54%"><p id="p16572144694311"><a name="p16572144694311"></a><a name="p16572144694311"></a><strong id="b16866132761617"><a name="b16866132761617"></a><a name="b16866132761617"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p185721461435"><a name="p185721461435"></a><a name="p185721461435"></a><strong id="b1377613282167"><a name="b1377613282167"></a><a name="b1377613282167"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row1257284664318"><td class="cellrowborder" valign="top" width="48.54%"><p id="p95721946144317"><a name="p95721946144317"></a><a name="p95721946144317"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p1557313464439"><a name="p1557313464439"></a><a name="p1557313464439"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row1857324618435"><td class="cellrowborder" valign="top" width="48.54%"><p id="p1257344624314"><a name="p1257344624314"></a><a name="p1257344624314"></a><strong id="b1160353241610"><a name="b1160353241610"></a><a name="b1160353241610"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p457384611439"><a name="p457384611439"></a><a name="p457384611439"></a><strong id="b133681833151617"><a name="b133681833151617"></a><a name="b133681833151617"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row357318466439"><td class="cellrowborder" valign="top" width="48.54%"><p id="p1573164616438"><a name="p1573164616438"></a><a name="p1573164616438"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p857384614319"><a name="p857384614319"></a><a name="p857384614319"></a>Succeeded in canceling the ISR function.</p>
    </td>
    </tr>
    <tr id="row18573124610433"><td class="cellrowborder" valign="top" width="48.54%"><p id="p165731146134311"><a name="p165731146134311"></a><a name="p165731146134311"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="51.459999999999994%"><p id="p6573164613437"><a name="p6573164613437"></a><a name="p6573164613437"></a>Failed to cancel the ISR function.</p>
    </td>
    </tr>
    </tbody>
    </table>

    After the ISR function is set, call the following function to enable a GPIO interrupt:

    int32\_t GpioEnableIrq\(uint16\_t gpio\);

    **Table  7**  Description of GpioEnableIrq

    <a name="table26659291568"></a>
    <table><tbody><tr id="row866632919566"><td class="cellrowborder" valign="top" width="50%"><p id="p066642985615"><a name="p066642985615"></a><a name="p066642985615"></a><strong id="b108661927171614"><a name="b108661927171614"></a><a name="b108661927171614"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p566613293568"><a name="p566613293568"></a><a name="p566613293568"></a><strong id="b10777228121617"><a name="b10777228121617"></a><a name="b10777228121617"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row19666029165620"><td class="cellrowborder" valign="top" width="50%"><p id="p16660295566"><a name="p16660295566"></a><a name="p16660295566"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p1566632916566"><a name="p1566632916566"></a><a name="p1566632916566"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row84182176010"><td class="cellrowborder" valign="top" width="50%"><p id="p1566652915566"><a name="p1566652915566"></a><a name="p1566652915566"></a><strong id="b160443201612"><a name="b160443201612"></a><a name="b160443201612"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p966642917562"><a name="p966642917562"></a><a name="p966642917562"></a><strong id="b12369193319162"><a name="b12369193319162"></a><a name="b12369193319162"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row154188171403"><td class="cellrowborder" valign="top" width="50%"><p id="p1866610292563"><a name="p1866610292563"></a><a name="p1866610292563"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p13666182975613"><a name="p13666182975613"></a><a name="p13666182975613"></a>Succeeded in enabling a GPIO interrupt.</p>
    </td>
    </tr>
    <tr id="row1041891720012"><td class="cellrowborder" valign="top" width="50%"><p id="p766642911562"><a name="p766642911562"></a><a name="p766642911562"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p1566652995613"><a name="p1566652995613"></a><a name="p1566652995613"></a>Failed to enable a GPIO interrupt.</p>
    </td>
    </tr>
    </tbody>
    </table>

    >![](../public_sys-resources/icon-caution.gif) **CAUTION:** 
    >The configured ISR function can be responded only after the GPIO interrupt is enabled.

    Use the following function to disable the GPIO interrupt:

    int32\_t GpioDisableIrq\(uint16\_t gpio\);

    **Table  8**  Description of GpioDisableIrq

    <a name="table186682041918"></a>
    <table><tbody><tr id="row186684413116"><td class="cellrowborder" valign="top" width="50%"><p id="p866844916"><a name="p866844916"></a><a name="p866844916"></a><strong id="b88678273169"><a name="b88678273169"></a><a name="b88678273169"></a>Parameter</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p46681413119"><a name="p46681413119"></a><a name="p46681413119"></a><strong id="b2077772812169"><a name="b2077772812169"></a><a name="b2077772812169"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row4668243113"><td class="cellrowborder" valign="top" width="50%"><p id="p46681141919"><a name="p46681141919"></a><a name="p46681141919"></a>gpio</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p136681241311"><a name="p136681241311"></a><a name="p136681241311"></a>GPIO pin number.</p>
    </td>
    </tr>
    <tr id="row066884412"><td class="cellrowborder" valign="top" width="50%"><p id="p566824015"><a name="p566824015"></a><a name="p566824015"></a><strong id="b16605123251612"><a name="b16605123251612"></a><a name="b16605123251612"></a>Return Value</strong></p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p1766974515"><a name="p1766974515"></a><a name="p1766974515"></a><strong id="b1237063341617"><a name="b1237063341617"></a><a name="b1237063341617"></a>Description</strong></p>
    </td>
    </tr>
    <tr id="row156694410112"><td class="cellrowborder" valign="top" width="50%"><p id="p14669141214"><a name="p14669141214"></a><a name="p14669141214"></a>0</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p1266934818"><a name="p1266934818"></a><a name="p1266934818"></a>Succeeded in disabling a GPIO interrupt.</p>
    </td>
    </tr>
    <tr id="row176691543117"><td class="cellrowborder" valign="top" width="50%"><p id="p7669941716"><a name="p7669941716"></a><a name="p7669941716"></a>Negative value</p>
    </td>
    <td class="cellrowborder" valign="top" width="50%"><p id="p4669164219"><a name="p4669164219"></a><a name="p4669164219"></a>Failed to disable a GPIO interrupt.</p>
    </td>
    </tr>
    </tbody>
    </table>

    Example:

    ```
    /* ISR function */
    */
    int32_t MyCallBackFunc(uint16_t gpio, void *data)
    {
        HDF_LOGI("%s: gpio:%u interrupt service in! data=%p\n", __func__, gpio, data);
        return 0;
    }
    
    int32_t ret;
    /* Set the ISR function to MyCallBackFunc, the parameter to NULL, and the interrupt trigger mode to rising edge. */
    ret = GpioSetIrq(3, OSAL_IRQF_TRIGGER_RISING, MyCallBackFunc, NULL);
    if (ret != 0) {
        HDF_LOGE("GpioSetIrq: failed, ret %d\n", ret);
        return;
    }
    
    /* Enable an interrupt for GPIO3. */
    ret = GpioEnableIrq(3);
    if (ret != 0) {
        HDF_LOGE("GpioEnableIrq: failed, ret %d\n", ret);
        return;
    }
    
    /* Disable the interrupt for GPIO3. */
    ret = GpioDisableIrq(3);
    if (ret != 0) {
        HDF_LOGE("GpioDisableIrq: failed, ret %d\n", ret);
        return;
    }
    
    /* Cancel the ISR function for GPIO3. */
    ret = GpioUnSetIrq(3);
    if (ret != 0) {
        HDF_LOGE("GpioUnSetIrq: failed, ret %d\n", ret);
        return;
    }
    ```


## Usage Example<a name="section25941262111"></a>

In this example, we test the interrupt trigger of a GPIO pin as follows: Set the ISR function for the pin, set the trigger mode to rising edge and failing edge, write high and low levels to the pin alternately to generate level fluctuation, and observe the execution of the ISR function.

Select an idle GPIO pin. This example uses a Hi3516D V300 development board and GPIO pin GPIO10\_3, which is numbered GPIO83.

You can select an idle GPIO pin based on the development board and schematic diagram.

```
#include "gpio_if.h"
#include "hdf_log.h"
#include "osal_irq.h"
#include "osal_time.h"

static uint32_t g_irqCnt;

/* ISR function */
static int32_t TestCaseGpioIrqHandler(uint16_t gpio, void *data)
{
    HDF_LOGE("%s: irq triggered! on gpio:%u, data=%p", __func__, gpio, data);
    g_irqCnt++; /* If the ISR function is triggered, the number of global interrupts is incremented by 1. */
    return GpioDisableIrq(gpio);
}

/* Test case function */
static int32_t TestCaseGpioIrqEdge(void)
{
    int32_t ret;
    uint16_t valRead;
    uint16_t mode;
    uint16_t gpio = 83; /* Number of the GPIO pin to test */
    uint32_t timeout;

    /* Set the output direction for the pin. */
    ret = GpioSetDir(gpio, GPIO_DIR_OUT);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: set dir fail! ret:%d\n", __func__, ret);
        return ret;
    }

    /* Disable the interrupt of the pin. */
    ret = GpioDisableIrq(gpio);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: disable irq fail! ret:%d\n", __func__, ret);
        return ret;
    }

    /* Set the ISR function for the pin. The trigger mode is both rising edge and falling edge. */
    mode = OSAL_IRQF_TRIGGER_RISING | OSAL_IRQF_TRIGGER_FALLING;
    HDF_LOGE("%s: mode:%0x\n", __func__, mode);
    ret = GpioSetIrq(gpio, mode, TestCaseGpioIrqHandler, NULL);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: set irq fail! ret:%d\n", __func__, ret);
        return ret;
    }

    /* Enable the interrupt for this pin. */
    ret = GpioEnableIrq(gpio);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: enable irq fail! ret:%d\n", __func__, ret);
        (void)GpioUnSetIrq(gpio);
        return ret;
    }

    g_irqCnt = 0; /* Reset the global counter. */
    timeout = 0;  /* Reset the waiting time. */
    /* Wait for the ISR function of this pin to trigger. The timeout duration is 1000 ms. */
    while (g_irqCnt <= 0 && timeout < 1000) {
        (void)GpioRead(gpio, &valRead);
        (void)GpioWrite(gpio, (valRead == GPIO_VAL_LOW) ? GPIO_VAL_HIGH : GPIO_VAL_LOW);
        HDF_LOGE("%s: wait irq timeout:%u\n", __func__, timeout);
        OsalMDelay(200); /* wait for irq trigger */
        timeout += 200;
    }
    (void)GpioUnSetIrq(gpio);
    return (g_irqCnt > 0) ? HDF_SUCCESS : HDF_FAILURE;
}
```