Fix building issue of Nuvoton porting. (#6833)

* Fix  building issue of Nuvoton porting.

1. Change thread priority of lwip-tcpip and erx.
2. Remove '')' garbage symbols.
3. mm driver issues.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

bsp/nuvoton/libraries/m031/rtt_port/SConscript

@@ -10,4 +10,3 @@ CPPPATH = [cwd]
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/m2354/rtt_port/SConscript

@@ -21,4 +21,3 @@ else:
     group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/m460/rtt_port/SConscript

@@ -43,4 +43,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/m480/rtt_port/SConscript

@@ -33,4 +33,3 @@ else:
     group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/ma35/libcpu/arm/cortex-m4/SConscript

 # RT-Thread building script for component
 
-Import('RTT_ROOT')
 from building import *
+Import('RTT_ROOT')
 
 cwd     = GetCurrentDir()
 src = Glob('*.c') + Glob('*.cpp')
@@ -11,5 +11,4 @@ group = []
 # USB driver constrain
 group = DefineGroup('CPU', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
-')
+Return('group')
\ No newline at end of file

bsp/nuvoton/libraries/ma35/rtt_port/SConscript

@@ -19,4 +19,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/n9h30/rtt_port/SConscript

@@ -19,4 +19,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/nuc980/rtt_port/SConscript

@@ -12,4 +12,3 @@ group = []
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/ma35-rtp/board/SConscript

@@ -16,4 +16,3 @@ CPPPATH = [cwd, cwd + '/nutool_pincfg']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/nk-980iot/.config

@@ -57,6 +57,7 @@ CONFIG_RT_USING_SIGNALS=y
 #
 # Memory Management
 #
+CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -98,7 +99,7 @@ CONFIG_ARCH_ARM_ARM9=y
 CONFIG_RT_USING_COMPONENTS_INIT=y
 CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
-CONFIG_RT_MAIN_THREAD_PRIORITY=10
+CONFIG_RT_MAIN_THREAD_PRIORITY=20
 # CONFIG_RT_USING_LEGACY is not set
 CONFIG_RT_USING_MSH=y
 CONFIG_RT_USING_FINSH=y
@@ -171,6 +172,7 @@ CONFIG_RT_CAN_USING_HDR=y
 # CONFIG_RT_CAN_USING_CANFD is not set
 CONFIG_RT_USING_HWTIMER=y
 CONFIG_RT_USING_CPUTIME=y
+CONFIG_CPUTIME_TIMER_FREQ=0
 CONFIG_RT_USING_I2C=y
 # CONFIG_RT_I2C_DEBUG is not set
 CONFIG_RT_USING_I2C_BITOPS=y
@@ -358,12 +360,12 @@ CONFIG_RT_LWIP_TCP_PCB_NUM=16
 CONFIG_RT_LWIP_TCP_SEG_NUM=64
 CONFIG_RT_LWIP_TCP_SND_BUF=16384
 CONFIG_RT_LWIP_TCP_WND=65535
-CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
+CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=21
 CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=4096
 # CONFIG_LWIP_NO_RX_THREAD is not set
-# CONFIG_LWIP_NO_TX_THREAD is not set
-CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
+CONFIG_LWIP_NO_TX_THREAD=y
+CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=22
 CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=4096
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_REASSEMBLY_FRAG=y
@@ -373,7 +375,7 @@ CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
 CONFIG_LWIP_SO_RCVBUF=1
-CONFIG_LWIP_SO_LINGER=0
+CONFIG_LWIP_SO_LINGER=1
 CONFIG_RT_LWIP_NETIF_LOOPBACK=y
 CONFIG_LWIP_NETIF_LOOPBACK=1
 CONFIG_RT_LWIP_STATS=y
@@ -949,6 +951,7 @@ CONFIG_PKG_OPTPARSE_VER="latest"
 # CONFIG_PKG_USING_SOEM is not set
 # CONFIG_PKG_USING_QPARAM is not set
 # CONFIG_PKG_USING_CorevMCU_CLI is not set
+# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set
 
 #
 # Arduino libraries

bsp/nuvoton/nk-980iot/board/SConscript

 # RT-Thread building script for component
 
 from building import *
-
-
 Import('RTT_ROOT')
-from building import *
 
 cwd = GetCurrentDir()
 src = Glob('*.c') + Glob('*.cpp')
@@ -12,4 +9,3 @@ CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 Return('group')
-')

bsp/nuvoton/nk-980iot/rtconfig.py

@@ -23,8 +23,8 @@ elif CROSS_TOOL == 'keil':
 if os.getenv('RTT_EXEC_PATH'):
 	EXEC_PATH = os.getenv('RTT_EXEC_PATH')
 
-BUILD = 'debug'
-#BUILD = ''
+#BUILD = 'debug'
+BUILD = ''
 
 CORE = 'arm926ej-s'
 MAP_FILE = 'rtthread_nuc980.map'

bsp/nuvoton/nk-n9h30/board/SConscript

@@ -12,4 +12,3 @@ CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 Return('group')
-')

bsp/nuvoton/nk-rtu980/.config

@@ -57,6 +57,7 @@ CONFIG_RT_USING_SIGNALS=y
 #
 # Memory Management
 #
+CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -98,7 +99,7 @@ CONFIG_ARCH_ARM_ARM9=y
 CONFIG_RT_USING_COMPONENTS_INIT=y
 CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
-CONFIG_RT_MAIN_THREAD_PRIORITY=10
+CONFIG_RT_MAIN_THREAD_PRIORITY=20
 # CONFIG_RT_USING_LEGACY is not set
 CONFIG_RT_USING_MSH=y
 CONFIG_RT_USING_FINSH=y
@@ -176,6 +177,7 @@ CONFIG_RT_CAN_USING_HDR=y
 # CONFIG_RT_CAN_USING_CANFD is not set
 CONFIG_RT_USING_HWTIMER=y
 CONFIG_RT_USING_CPUTIME=y
+CONFIG_CPUTIME_TIMER_FREQ=0
 CONFIG_RT_USING_I2C=y
 # CONFIG_RT_I2C_DEBUG is not set
 CONFIG_RT_USING_I2C_BITOPS=y
@@ -281,7 +283,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # POSIX (Portable Operating System Interface) layer
 #
 CONFIG_RT_USING_POSIX_FS=y
-CONFIG_RT_USING_POSIX_DEVIO=y
+# CONFIG_RT_USING_POSIX_DEVIO is not set
 # CONFIG_RT_USING_POSIX_STDIO is not set
 CONFIG_RT_USING_POSIX_POLL=y
 CONFIG_RT_USING_POSIX_SELECT=y
@@ -364,12 +366,12 @@ CONFIG_RT_LWIP_TCP_PCB_NUM=16
 CONFIG_RT_LWIP_TCP_SEG_NUM=64
 CONFIG_RT_LWIP_TCP_SND_BUF=16384
 CONFIG_RT_LWIP_TCP_WND=65535
-CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
+CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=21
 CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=4096
 # CONFIG_LWIP_NO_RX_THREAD is not set
-# CONFIG_LWIP_NO_TX_THREAD is not set
-CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
+CONFIG_LWIP_NO_TX_THREAD=y
+CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=22
 CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=4096
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_REASSEMBLY_FRAG=y
@@ -379,7 +381,7 @@ CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
 CONFIG_LWIP_SO_RCVBUF=1
-CONFIG_LWIP_SO_LINGER=0
+CONFIG_LWIP_SO_LINGER=1
 CONFIG_RT_LWIP_NETIF_LOOPBACK=y
 CONFIG_LWIP_NETIF_LOOPBACK=1
 CONFIG_RT_LWIP_STATS=y
@@ -947,6 +949,7 @@ CONFIG_PKG_OPTPARSE_VER="latest"
 # CONFIG_PKG_USING_SOEM is not set
 # CONFIG_PKG_USING_QPARAM is not set
 # CONFIG_PKG_USING_CorevMCU_CLI is not set
+# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set
 
 #
 # Arduino libraries

bsp/nuvoton/nk-rtu980/board/SConscript

@@ -12,4 +12,3 @@ CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 Return('group')
-')

bsp/nuvoton/nk-rtu980/rtconfig.py

@@ -23,8 +23,8 @@ if CROSS_TOOL == 'keil':
 if os.getenv('RTT_EXEC_PATH'):
 	EXEC_PATH = os.getenv('RTT_EXEC_PATH')
 
-BUILD = 'debug'
-#BUILD = ''
+#BUILD = 'debug'
+BUILD = ''
 
 CORE = 'arm926ej-s'
 MAP_FILE = 'rtthread_nuc980.map'

bsp/nuvoton/numaker-hmi-ma35d1/board/SConscript

@@ -16,4 +16,3 @@ CPPPATH = [cwd, cwd + '/nutool_pincfg']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-hmi-ma35d1/preload/SConscript

@@ -2,7 +2,6 @@
 
 from building import *
 
-
 Import('RTT_ROOT')
 from building import *
 
@@ -11,5 +10,4 @@ src = Glob('*.c') + Glob('*.cpp') + Glob('*.S')
 CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
-Return('group')
-')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-iot-m467/board/SConscript

@@ -16,5 +16,4 @@ CPPPATH = [cwd, cwd + '/NuPinConfig']
 
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
-')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-iot-m487/board/SConscript

@@ -18,4 +18,3 @@ CPPPATH = [cwd, cwd + '/NuClockConfig', cwd + '/NuPinConfig']
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-iot-ma35d1/board/SConscript

@@ -16,4 +16,3 @@ CPPPATH = [cwd, cwd + '/nutool_pincfg']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-iot-ma35d1/preload/SConscript

@@ -2,7 +2,6 @@
 
 from building import *
 
-
 Import('RTT_ROOT')
 from building import *
 
@@ -11,5 +10,4 @@ src = Glob('*.c') + Glob('*.cpp') + Glob('*.S')
 CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
-Return('group')
-')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-m032ki/board/SConscript

@@ -18,4 +18,3 @@ CPPPATH = [cwd, cwd + '/NuClockConfig', cwd + '/NuPinConfig']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-m2354/board/SConscript

@@ -18,4 +18,3 @@ CPPPATH = [cwd, cwd + '/NuClockConfig', cwd + '/NuPinConfig']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-m467hj/board/SConscript

@@ -17,4 +17,3 @@ CPPPATH = [cwd, cwd + '/NuPinConfig']
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/numaker-pfm-m487/board/SConscript

@@ -18,4 +18,3 @@ CPPPATH = [cwd, cwd + '/NuClockConfig', cwd + '/NuPinConfig']
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')