fix the cm3 assemble function issue.

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@121 bbd45198-f89e-11dd-88c7-29a3b14d5316

libcpu/arm/stm32/context_gcc.S

@@ -32,6 +32,7 @@
  * rt_base_t rt_hw_interrupt_disable();
  */
 .global rt_hw_interrupt_disable
+.type rt_hw_interrupt_disable, %function
 rt_hw_interrupt_disable:
 	MRS		r0, PRIMASK
 	CPSID		I
@@ -41,6 +42,7 @@ rt_hw_interrupt_disable:
  * void rt_hw_interrupt_enable(rt_base_t level);
  */
 .global rt_hw_interrupt_enable
+.type rt_hw_interrupt_enable, %function
 rt_hw_interrupt_enable:
 	MSR		PRIMASK, r0
 	BX		LR
@@ -51,7 +53,9 @@ rt_hw_interrupt_enable:
  * r1 --> to
  */
 .global rt_hw_context_switch_interrupt
+.type rt_hw_context_switch_interrupt, %function
 .global rt_hw_context_switch
+.type rt_hw_context_switch, %function
 
 rt_hw_context_switch_interrupt:
 rt_hw_context_switch:
@@ -80,6 +84,7 @@ _reswitch:
  * psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
  */
 .global rt_hw_pend_sv
+.type rt_hw_pend_sv, %function
 rt_hw_pend_sv:
 	/* disable interrupt to protect context switch */
 	MRS		r2, PRIMASK
@@ -118,6 +123,7 @@ swtich_to_thread:
  * r0 --> to
  */
 .global rt_hw_context_switch_to
+.type rt_hw_context_switch_to, %function
 rt_hw_context_switch_to:
 	LDR		r1, =rt_interrupt_to_thread
 	STR		r0, [r1]
@@ -142,6 +148,7 @@ rt_hw_context_switch_to:
 
 /* compatible with old version */
 .global rt_hw_interrupt_thread_switch
+.type rt_hw_interrupt_thread_switch, %function
 rt_hw_interrupt_thread_switch:
 	BX		lr
 	NOP

libcpu/arm/stm32/fault_gcc.S

@@ -19,6 +19,7 @@
 .text
 
 .global rt_hw_hard_fault
+.type rt_hw_hard_fault, %function
 rt_hw_hard_fault:
     /* get current context */
     MRS     r0, psp                 /* get fault thread stack pointer */

libcpu/arm/stm32/start_gcc.s

@@ -34,7 +34,6 @@
   .thumb
 
 .global  g_pfnVectors
-.global  SystemInit_ExtMemCtl_Dummy
 .global  Default_Handler
 
 /* start address for the initialization values of the .data section. 
@@ -48,7 +47,6 @@ defined in linker script */
 .word  _sbss
 /* end address for the .bss section. defined in linker script */
 .word  _ebss
-/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
 
 .equ  Initial_spTop,  0x20000400 
 .equ  BootRAM,        0xF1E0F85F
@@ -65,10 +63,6 @@ defined in linker script */
   .weak  Reset_Handler
   .type  Reset_Handler, %function
 Reset_Handler:  
-
-/* FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-  bl  SystemInit_ExtMemCtl
 /* restore original stack pointer */  
   LDR r0, =_estack
   MSR msp, r0
@@ -104,16 +98,6 @@ LoopFillZerobss:
   bx  lr    
 .size  Reset_Handler, .-Reset_Handler
 
-/**
- * @brief  Dummy SystemInit_ExtMemCtl function 
- * @param  None     
- * @retval : None       
-*/
-  .section  .text.SystemInit_ExtMemCtl_Dummy,"ax",%progbits
-SystemInit_ExtMemCtl_Dummy:
-  bx  lr
-  .size  SystemInit_ExtMemCtl_Dummy, .-SystemInit_ExtMemCtl_Dummy
-
 /**
  * @brief  This is the code that gets called when the processor receives an 
  *         unexpected interrupt.  This simply enters an infinite loop, preserving
@@ -468,7 +452,3 @@ g_pfnVectors:
 
   .weak  DMA2_Channel4_5_IRQHandler
   .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-
-  .weak  SystemInit_ExtMemCtl
-  .thumb_set SystemInit_ExtMemCtl,SystemInit_ExtMemCtl_Dummy
-