Skip to content

R
rt-thread

PHPmihuan / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 13a8afa2 编写于 作者: 双月鸟之roc's avatar 双月鸟之roc
浏览文件
操作

Merge branch 'master' of https://github.com/RT-Thread/rt-thread

上级 f93fb14a 33cb916f
展开全部 隐藏空白更改
内联 并排
Showing with 201 addition and 360 deletion
bsp/stm32f10x-HAL/applications/main.c
浏览文件 @ 13a8afa2
/*
* File : main.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/board.c
浏览文件 @ 13a8afa2
/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 RT-Thread Develop Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......@@ -47,6 +44,7 @@ void HAL_MspInit(void)
__HAL_AFIO_REMAP_SWJ_NOJTAG();
}
void SystemClock_Config(void)
{
rt_err_t ret = RT_EOK;
......@@ -63,7 +61,19 @@ void SystemClock_Config(void)
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
RT_ASSERT(ret == HAL_OK);
if(ret == HAL_TIMEOUT)
{
/* HSE timeout switch to HSI */
rt_memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct));
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = 16;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
RT_ASSERT(ret == HAL_OK);
}
/* Initializes the CPU, AHB and APB busses clocks */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
......@@ -103,6 +113,39 @@ void SystemClock_Config(void)
#endif
}
static void m3_m4_delay_us(rt_uint32_t us)
{
__IO uint32_t Delay = us * (SystemCoreClock / 8U / 1000000U);
do
{
__NOP();
}
while (Delay --);
}
void HAL_Delay(__IO uint32_t Delay)
{
m3_m4_delay_us(Delay * 10);
}
extern __IO uint32_t uwTick;
uint32_t HAL_GetTick(void)
{
HAL_Delay(1);
uwTick ++;
return uwTick;
}
void HAL_SuspendTick(void)
{
/* we should not suspend tick */
}
void HAL_ResumeTick(void)
{
/* we should not resume tick */
}
/**
* This is the timer interrupt service routine.
*
......@@ -111,6 +154,7 @@ void SysTick_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_IncTick();
rt_tick_increase();
/* leave interrupt */
......
bsp/stm32f10x-HAL/drivers/board.h
浏览文件 @ 13a8afa2
/*
* File : board.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_gpio.c
浏览文件 @ 13a8afa2
/*
* File : drv_gpio.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_gpio.h
浏览文件 @ 13a8afa2
/*
* File : drv_gpio.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_sdcard.c
浏览文件 @ 13a8afa2
/*
* File : drv_sdcard.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* SPDX-License-Identifier: Apache-2.0
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_sdcard.h
浏览文件 @ 13a8afa2
/*
* File : drv_sdcard.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* SPDX-License-Identifier: Apache-2.0
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_spi.c
浏览文件 @ 13a8afa2
/*
* File : dev_gpio.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_spi.h
浏览文件 @ 13a8afa2
/*
* File : gpio.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_usart.c
浏览文件 @ 13a8afa2
/*
* File : drv_usart.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_usart.h
浏览文件 @ 13a8afa2
/*
* File : usart.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_usb.c
浏览文件 @ 13a8afa2
/*
* File : drv_usb.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/drivers/drv_usb.h
浏览文件 @ 13a8afa2
/*
* File : drv_usb.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2015, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
......
bsp/stm32f10x-HAL/project.uvprojx
浏览文件 @ 13a8afa2
此差异已折叠。
bsp/stm32f10x-HAL/template.uvprojx
浏览文件 @ 13a8afa2
......@@ -14,16 +14,16 @@
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32F103RB</Device>
<Device>STM32F103RC</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x5000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<Cpu>IRAM(0x20000000,0xC000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile>$$Device:STM32F103RB$Device\Include\stm32f10x.h</RegisterFile>
<RegisterFile>$$Device:STM32F103RC$Device\Include\stm32f10x.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
......@@ -33,7 +33,7 @@
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
<SFDFile>$$Device:STM32F103RC$SVD\STM32F103xx.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
......@@ -111,8 +111,8 @@
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments> -REMAP</SimDllArguments>
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<SimDlgDll>DARMSTM.DLL</SimDlgDll>
<SimDlgDllArguments>-pSTM32F103RC</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments></TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
......@@ -138,7 +138,7 @@
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3>"" ()</Flash3>
<Flash3></Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
......@@ -244,12 +244,12 @@
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x5000</Size>
<Size>0xc000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x20000</Size>
<Size>0x40000</Size>
</IROM>
<XRAM>
<Type>0</Type>
......@@ -274,7 +274,7 @@
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x20000</Size>
<Size>0x40000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
......@@ -299,7 +299,7 @@
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x5000</Size>
<Size>0xc000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
......@@ -324,6 +324,7 @@
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>1</v6Lang>
<v6LangP>1</v6LangP>
......
bsp/stm32f4xx-HAL/Kconfig
浏览文件 @ 13a8afa2
......@@ -297,20 +297,24 @@ config RT_HSE_VALUE
config RT_HSE_HCLK
int "System Clock Value"
default 84000000
config RT_USING_UART1
config BSP_USING_UART1
bool "Using UART1"
select RT_USING_SERIAL
default y
config RT_USING_UART2
config BSP_USING_UART2
bool "Using UART2"
select RT_USING_SERIAL
default n
config RT_USING_UART3
config BSP_USING_UART3
bool "Using UART3"
select RT_USING_SERIAL
default n
config RT_USING_UART6
config BSP_USING_UART6
bool "Using UART6"
select RT_USING_SERIAL
default n
if RT_USING_CAN
......
bsp/stm32f4xx-HAL/drivers/drv_i2c.c
浏览文件 @ 13a8afa2
......@@ -78,11 +78,12 @@ static rt_int32_t drv_get_scl(void *data)
static void drv_udelay(rt_uint32_t us)
{
int i = (HAL_RCC_GetHCLKFreq() / 4000000 * us);
while (i)
__IO uint32_t Delay = us * (SystemCoreClock / 8U / 1000000U);
do
{
i--;
}
__NOP();
}
while (Delay --);
}
static const struct rt_i2c_bit_ops drv_bit_ops =
......
bsp/stm32f4xx-HAL/drivers/drv_usart.c
浏览文件 @ 13a8afa2
......@@ -147,7 +147,7 @@ static const struct rt_uart_ops drv_uart_ops =
drv_getc,
};
#if defined(RT_USING_UART1)
#if defined(BSP_USING_UART1)
/* UART1 device driver structure */
static struct drv_uart uart1;
struct rt_serial_device serial1;
......@@ -168,9 +168,9 @@ void USART1_IRQHandler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART1 */
#endif /* BSP_USING_UART1 */
#if defined(RT_USING_UART2)
#if defined(BSP_USING_UART2)
/* UART2 device driver structure */
static struct drv_uart uart2;
struct rt_serial_device serial2;
......@@ -191,9 +191,9 @@ void USART2_IRQHandler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART2 */
#endif /* BSP_USING_UART2 */
#if defined(RT_USING_UART3)
#if defined(BSP_USING_UART3)
/* UART3 device driver structure */
static struct drv_uart uart3;
struct rt_serial_device serial3;
......@@ -214,9 +214,9 @@ void USART3_IRQHandler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART3 */
#endif /* BSP_USING_UART3 */
#if defined(RT_USING_UART6)
#if defined(BSP_USING_UART6)
/* UART6 device driver structure */
static struct drv_uart uart6;
struct rt_serial_device serial6;
......@@ -237,7 +237,7 @@ void USART6_IRQHandler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART6 */
#endif /* BSP_USING_UART6 */
/**
* @brief UART MSP Initialization
......@@ -365,7 +365,7 @@ int hw_usart_init(void)
{
struct drv_uart *uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef RT_USING_UART1
#ifdef BSP_USING_UART1
uart = &uart1;
uart->UartHandle.Instance = USART1;
uart->irq = USART1_IRQn;
......@@ -375,8 +375,8 @@ int hw_usart_init(void)
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
#ifdef RT_USING_UART2
#endif /* BSP_USING_UART1 */
#ifdef BSP_USING_UART2
uart = &uart2;
uart->UartHandle.Instance = USART2;
uart->irq = USART2_IRQn;
......@@ -386,8 +386,8 @@ int hw_usart_init(void)
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART2 */
#ifdef RT_USING_UART3
#endif /* BSP_USING_UART2 */
#ifdef BSP_USING_UART3
uart = &uart3;
uart->UartHandle.Instance = USART3;
uart->irq = USART3_IRQn;
......@@ -397,18 +397,19 @@ int hw_usart_init(void)
rt_hw_serial_register(&serial3, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART3 */
#ifdef RT_USING_UART6
#endif /* BSP_USING_UART3 */
#ifdef BSP_USING_UART6
uart = &uart6;
uart->UartHandle.Instance = USART6;
uart->irq = USART6_IRQn;
serial6.ops = &drv_uart_ops;
serial6.config = config;
/* register UART2 device */
/* register UART6 device */
rt_hw_serial_register(&serial6, "uart6",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART6 */
#endif /* BSP_USING_UART6 */
return 0;
}
INIT_BOARD_EXPORT(hw_usart_init);
bsp/stm32f4xx-HAL/rtconfig.py
浏览文件 @ 13a8afa2
......@@ -3,16 +3,15 @@
import os
# toolchains options
ARCH='arm'
CPU='cortex-m4'
CROSS_TOOL='gcc'
ARCH = 'arm'
CPU = 'cortex-m4'
CROSS_TOOL = 'gcc'
if os.getenv('RTT_CC'):
CROSS_TOOL = os.getenv('RTT_CC')
#device options
# cross_tool provides the cross compiler
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
if CROSS_TOOL == 'gcc':
......@@ -44,7 +43,7 @@ if PLATFORM == 'gcc':
OBJCPY = PREFIX + 'objcopy'
DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
CFLAGS = DEVICE + ' -std=c99 -Dgcc' # -D' + PART_TYPE
CFLAGS = DEVICE + ' -std=c99'
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-stm32.map,-cref,-u,Reset_Handler -T stm32_rom.ld'
......
components/net/sal_socket/include/sal_socket.h
浏览文件 @ 13a8afa2
......@@ -85,13 +85,15 @@ typedef uint16_t in_port_t;
#define AF_INET6 10
#define AF_CAN 29 /* Controller Area Network */
#define AF_AT 45 /* AT socket */
#define AF_WIZ 46 /* WIZnet socket */
#define PF_INET AF_INET
#define PF_INET6 AF_INET6
#define PF_UNSPEC AF_UNSPEC
#define PF_CAN AF_CAN
#define PF_AT AF_AT
#define PF_WIZ AF_WIZ
#define AF_MAX (AF_AT + 1) /* For now.. */
#define AF_MAX (AF_WIZ + 1) /* For now.. */
#define IPPROTO_IP 0
#define IPPROTO_ICMP 1
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或