- 31 7月, 2006 1 次提交
-
-
由 Jeremy Kerr 提交于
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. cell platform changes. Built for cell_defconfig Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 03 7月, 2006 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This adapts the generic powerpc interrupt handling code, and all of the platforms except for the embedded 6xx machines, to use the new genirq framework. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Dave Jones 提交于
(Only fails with -Werror-implicit-function-declaration, but it should still be fixed). arch/powerpc/platforms/cell/setup.c:145: error: implicit declaration of function 'udbg_init_rtas_console' Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Thomas Gleixner 提交于
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 6月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2006 7 次提交
-
-
由 Arnd Bergmann 提交于
The class zero interrupt handling for spus was confusing alignment and error interrupts, so swap them. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
spufs_base.c calls __add_pages, which depends on CONFIG_MEMORY_HOTPLUG. Moved the selection of CONFIG_MEMORY_HOTPLUG from CONFIG_SPUFS_MMAP to CONFIG_SPU_FS. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
In the context save/restore code, the SPU MFC command queue purge code has a bug: static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; /* Save, Step 28: * Poll MFC_CNTL[Ps] until value '11' is * read * (purge complete). */ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & MFC_CNTL_PURGE_DMA_COMPLETE); } This will exit as soon as _one_ of the 2 bits that compose MFC_CNTL_PURGE_DMA_COMPLETE is set, and one of them happens to be "purge in progress"... which means that we'll happily continue restoring the MFC while it's being purged at the same time. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This fixes a bug where we don't properly map SPE MMIO space as guarded, causing various test cases to fail, probably due to write combining and other niceties caused by the lack of the G bit. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Enable the RTAS udbg console on IBM Cell Blade, this allows xmon to work. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ingo Molnar 提交于
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Andreas Mohr 提交于
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 26 6月, 2006 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Convert a few stragglers over to for_each_possible_cpu(), remove for_each_cpu(). Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
It's going away. I wonder if this code really meant to iterate across not-present, not-online CPUs. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2006 1 次提交
-
-
由 David Howells 提交于
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 6月, 2006 20 次提交
-
-
由 Andreas Schwab 提交于
Avoid duplication of the syscall table for the cell platform. Based on an idea from David Woodhouse. Signed-off-by: NAndreas Schwab <schwab@suse.de> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
The SPU context save/restore code is currently built for a 4k page size and we provide a _shipped version of it since most people don't have the spu toolchain that is needed to rebuild that code. This patch hardcodes the data structures to a 64k page alignment, which also guarantees 4k alignment but unfortunately wastes 60k of memory per SPU context that is created in the running system. We will follow up on this with another patch to reduce that overhead or maybe redo the context save/restore logic to do this part entirely different, but for now it should make experimental systems work with either page size. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
At this time, all flags are invalid. Since we are planning to actually add valid flags in the future, we better check if any were passed by the user. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Masato Noguchi 提交于
SPU interrupt status must be cleared before handle it. Otherwise, kernel may drop some interrupt packet. Currently, class2 interrupt treated like: 1) call callback to wake up waiting process 2) mask raised mailbox interrupt 3) clear interrupt status I changed like: 1) mask raised mailbox interrupt 2) clear interrupt status 3) call callback to wake up waiting process Clearing status before masking will make spurious interrupt. Thus, it is necessary to hold by steps I described above, I think. Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Masato Noguchi 提交于
added spu_{save,restore}_dump.h to target of 'make clean' Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Masato Noguchi 提交于
This patch remove 'stop_code' -- discarded member of struct spu. It is written at initialize and interrupt, but never read in current implementation. Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
This changes the hypervisor abstraction of setting cpu affinity to a higher level to avoid platform dependent interrupt controller routines. I replaced spu_priv1_ops:spu_int_route_set() with a new routine spu_priv1_ops:spu_cpu_affinity_set(). As a by-product, this change eliminated what looked like an existing bug in the set affinity code where spu_int_route_set() mistakenly called int_stat_get(). Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
To support muti-platform binaries the spu hypervisor accessor routines must have runtime binding. I removed the existing statically linked routines in spu.h and spu_priv1_mmio.c and created new accessor routines in spu_priv1.h that operate indirectly through an ops struct spu_priv1_ops. spu_priv1_mmio.c contains the instance of the accessor routines for running on raw hardware. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE. The existing CONFIG_PPC_CELL is now used to denote the generic Cell processor support. PPC_CELL = make descends into platforms/cell PPC_CELL_NATIVE = add bare metal support PPC_IBM_CELL_BLADE = add blade device drivers, etc. Also renames spu_priv1.c to spu_priv1_mmio.c. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
The save/restore sequence for SPE contexts currently attempts to save and restore the channel count for SPE channel 1 (the SPU_WriteEventMask channel. But the CBE architecture (section 9.11.2) clearly states that this channel does not have an associated count. Hardware simply ignores the attempt to write this count, but the simulator generates a warning message. WARNING: 279721590: SPE7: Attempt to write channel count for CH 1 with no associated count is ignored. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
Clean up create_spu() a little by using kzalloc instead of kmalloc + assignments. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
The wbox channel count of an spu is now initialized to four for the saved context. This makes it possible to write to the mailbox right away without waiting for the SPE to become scheduled first. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
For performance analysis, it is often interesting to know which physical SPE a thread is currently running on, and, more importantly, if it is running at all. This patch adds a simple attribute to each SPU directory with that information. The attribute is read-only and called 'phys-id'. It contains an ascii string with the number of the physical SPU (e.g. "0x5"), or alternatively the string "0xffffffff" (32 bit -1) when it is not running at all at the time that the file is read. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
spufs currently knows only 4k pages and 16M hugetlb pages. Make it use the regular methods for deciding on the SLB bits. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
spufs_rmdir tries to acquire the spufs root i_mutex, which is already held by spufs_create_thread. This was tracked as Bug #H9512. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
A recent change to the way that the mfc file gets mapped made it impossible to map the SPE Multi-Source Synchronization register into user space, but that may be needed by some applications. This restores the missing functionality. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
The spu_base module is rather deeply intermixed with the core kernel, so it makes sense to have that built-in. This will let us extend the base in the future without having to export more core symbols just for it. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
SPUs are registered as system devices, exposing attributes through sysfs. Since the sysdev includes a kref, we can remove the one in struct spu (it isn't used at the moment anyway). Currently only the interrupt source and numa node attributes are added. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 arnd@arndb.de 提交于
Checking the priority field to test for irq validity is completely bogus and breaks with future external interrupt controllers. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This is a first version of support for the Cell BE "Reliability, Availability and Serviceability" features. It doesn't yet handle some of the RAS interrupts (the ones described in iic_is/iic_irr), I'm still working on a proper way to expose these. They are essentially a cascaded controller by themselves (sic !) though I may just handle them locally to the iic driver. I need also to sync with David Erb on the way he hooked in the performance monitor interrupt. So that's all for 2.6.17 and I'll do more work on that with my rework of the powerpc interrupt layer that I'm hacking on at the moment. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 6月, 2006 1 次提交
-
-
由 Anton Blanchard 提交于
For pseries IOMMU bypass I want to be able to fall back to the regular IOMMU ops. Do this by creating a dma_mapping_ops struct, and convert the others while at it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-