- 26 4月, 2012 3 次提交
-
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver fixes from Matthew Garrett: "One annoyance fix (make intel_ips stop complaining unnecessarily) and one oops fix (unterminated list in dell-laptop). Both have been in -next for a while with no complaints." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: dell-laptop: Terminate quirks list properly intel_ips: Hush the i915 symbols message
-
由 Johannes Weiner 提交于
None of the callsites actually need the page_cgroup descriptor themselves, so just pass the page and do the look up in there. We already had two bugs (6568d4a9 'mm: memcg: update the correct soft limit tree during migration' and 'memcg: fix Bad page state after replace_page_cache') where the passed page and pc were not referring to the same page frame. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Miller 提交于
The comments above __alloc_bootmem_node() claim that the code will first try the allocation using 'goal' and if that fails it will try again but with the 'goal' requirement dropped. Unfortunately, this is not what the code does, so fix it to do so. This is important for nobootmem conversions to architectures such as sparc where MAX_DMA_ADDRESS is infinity. On such architectures all of the allocations done by generic spots, such as the sparse-vmemmap implementation, will pass in: __pa(MAX_DMA_ADDRESS) as the goal, and with the limit given as "-1" this will always fail unless we add the appropriate fallback logic here. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 4月, 2012 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull gfs2 fixes from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Instruct DLM to avoid queue convert slowdown
-
git://gitorious.org/kernel-hsi/kernel-hsi由 Linus Torvalds 提交于
Pull HSI fixes and ABI documentation from Carlos Chinea * tag 'hsi_fixes_for_3.4' of git://gitorious.org/kernel-hsi/kernel-hsi: HSI: Add HSI ABI documentation HSI: hsi_char: Remove max_data_size from sysfs HSI: hsi: Rework hsi_event interface HSI: hsi: Remove controllers and ports from the bus HSI: hsi: Fix error path cleanup on client registration HSI: hsi: Rework hsi_controller release
-
由 Bob Peterson 提交于
This patch instructs DLM to prevent an "in place" conversion, where the lock just stays on the granted queue, and instead forces the conversion to the back of the convert queue. This is done on upward conversions only. This is useful in cases where, for example, a lock is frequently needed in PR on one node, but another node needs it temporarily in EX to update it. This may happen, for example, when the rindex is being updated by gfs2_grow. The gfs2_grow needs to have the lock in EX, but the other nodes need to re-read it to retrieve the updates. The glock is already granted in PR on the non-growing nodes, so this prevents them from continually re-granting the lock in PR, and forces the EX from gfs2_grow to go through. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bug fixes from Ted Ts'o: "These are two low-risk bug fixes for ext4, fixing a compile warning and a potential deadlock." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: super.c: unused variable warning without CONFIG_QUOTA jbd2: use GFP_NOFS for blkdev_issue_flush
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel由 Linus Torvalds 提交于
Pull Hexagon fixes from Richard Kuo: "It's mostly compile fixes and the Hexagon portion of a CPU hotplug patch set." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: hexagon: add missing cpu.h include hexagon/CPU hotplug: Add missing call to notify_cpu_starting() hexagon: use renamed tick_nohz_idle_* functions Hexagon: misc compile warning/error cleanup due to missing headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull build system failure fix from Michal Marek: "This fixes build failure with newer gcc that adds some internal symbols that end in "__mod_*_device_table", but are not actually the tables themselves." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix modpost failures in fedora 17
-
由 Eldad Zack 提交于
sb info is only checked with quota support. fs/ext4/super.c: In function ‘parse_options’: fs/ext4/super.c:1600:23: warning: unused variable ‘sbi’ [-Wunused-variable] Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Shaohua Li 提交于
flush request is issued in transaction commit code path, so looks using GFP_KERNEL to allocate memory for flush request bio falls into the classic deadlock issue. I saw btrfs and dm get it right, but ext4, xfs and md are using GFP. Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull a few more md bug fixes from NeilBrown: "2 are tagged for -stable, one being for a fairly serious bug that can corrupt metadata and make it hard to recovery an array. The other is for a more recent regression since 3.3" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md: fix possible corruption of array metadata on shutdown. md: don't call ->add_disk unless there is good reason. DM RAID: Use safe version of rdev_for_each
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm由 Linus Torvalds 提交于
Pull dlm fixes from David Teigland: "This includes one short patch fixing the behavior of the QUECVT flag, which the gfs2 folks are waiting on." * tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix QUECVT when convert queue is empty
-
由 Hugh Dickins 提交于
Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390 3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap() tries to transfer dirty flag from s390 storage key to struct page and radix_tree. That would be because of reclaim's shrink_page_list() calling add_to_swap() on this page at the same time: first PageSwapCache is set (causing page_mapping(page) to appear as &swapper_space), then page->private set, then tree_lock taken, then page inserted into radix_tree - so there's an interval before taking the lock when the radix_tree slot is empty. We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up before the SetPageSwapCache. But a better fix is simply to do what's five years overdue: Ken Chen introduced __set_page_dirty_no_writeback() (if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree overhead, and swap is just the same - it ignores the radix_tree tag, and does not participate in dirty page accounting, so should be using __set_page_dirty_no_writeback() too. s390 testing now confirms that this does indeed fix the problem. Reported-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ken Chen <kenchen@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
commit c744a65c md: don't set md arrays to readonly on shutdown. removed the possibility of a 'BUG' when data is written to an array that has just been switched to read-only, but also introduced the possibility that the array metadata could be corrupted. If, when md_notify_reboot gets the mddev lock, the array is in a state where it is assembled but hasn't been started (as can happen if the personality module is not available, or in other unusual situations), then incorrect metadata will be written out making it impossible to re-assemble the array. So only call __md_stop_writes() if the array has actually been activated. This patch is needed for any stable kernel which has had the above commit applied. Cc: stable@vger.kernel.org Reported-by: NChristoph Nelles <evilazrael@evilazrael.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Commit 7bfec5f3 md/raid5: If there is a spare and a want_replacement device, start replacement. cause md_check_recovery to call ->add_disk much more often. Instead of only when the array is degraded, it is now called whenever md_check_recovery finds anything useful to do, which includes updating the metadata for clean<->dirty transition. This causes unnecessary work, and causes info messages from ->add_disk to be reported much too often. So refine md_check_recovery to only do any actual recovery checking (including ->add_disk) if MD_RECOVERY_NEEDED is set. This fix is suitable for 3.3.y: Cc: stable@vger.kernel.org Reported-by: NJan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Jonathan Brassow 提交于
Fix segfault caused by using rdev_for_each instead of rdev_for_each_safe Commit dafb20fa mistakenly replaced a safe iterator with an unsafe one when making some macro changes. Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Srivatsa S. Bhat 提交于
The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Fixed warnings/errors for EXPORT_SYMBOL, linux_binprm, elf related defines Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 David Teigland 提交于
The QUECVT flag should not prevent conversions from being granted immediately when the convert queue is empty. Signed-off-by: NDavid Teigland <teigland@redhat.com>
-
- 23 4月, 2012 16 次提交
-
-
由 Carlos Chinea 提交于
Adds sysfs HSI framework documentation Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Carlos Chinea 提交于
Remove max_data_size sysfs entry. Otherwise is possible to have a buffer overrun if its value is increased after the device is open. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Carlos Chinea 提交于
Remove custom hack and make use of the notifier chain interfaces for delivering events from the ports to their associated clients. Clients that want to receive port events need to register their callbacks using hsi_register_port_event(). The callbacks can be called in interrupt context. Use hsi_unregestier_port_event() to undo the registration. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Carlos Chinea 提交于
HSI controllers and ports do not belong to the HSI bus. Those devices are not supposed to have a driver attached to them. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Carlos Chinea 提交于
HSI client structure should be freed on error path after calling device_registration by dropping a reference to it. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Carlos Chinea 提交于
Use the proper release mechanism for hsi_controller and hsi_ports structures. Free the structures through their associated device release callbacks. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Here's my usual Sunday push, just for one revert which PeterZ hollered about after last weeks push. Other than that, all seems strangely quiet as far as fixes go in non-platform ARM land at the moment." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few fixes for powerpc. Note the addition to the generic irq.h. This is part of a 3-patches regression fix for mpic due to changes in how IRQ_TYPE_NONE is being handled. Thomas agreed to the addition of the new IRQ_TYPE_DEFAULT contant, however he hasn't replied with an Ack to the actual patch yet. I don't to wait much longer with these patches tho." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mpic: Properly set default triggers irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers powerpc/mpic: Fix confusion between hw_irq and virq powerpc/pmac: Don't add_timer() twice powerpc/eeh: Fix crash caused by null eeh_dev powerpc/mpc85xx: add MPIC message dts node powerpc/mpic_msgr: fix offset error when setting mer register powerpc/mpic_msgr: add lock for MPIC message global variable powerpc/mpic_msgr: fix compile error when SMP disabled powerpc: fix build when CONFIG_BOOKE_WDT is enabled powerpc/85xx: don't call of_platform_bus_probe() twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix namespace init and cleanup in phonet to fix some oopses, from Eric W. Biederman. 2) Missing kfree_skb() in AF_KEY, from Julia Lawall. 3) Refcount leak and source address handling fix in l2tp from James Chapman. 4) Memory leak fix in CAIF from Tomasz Gregorek. 5) When routes are cloned from ipv6 addrconf routes, we don't process expirations properly. Fix from Gao Feng. 6) Fix panic on DMA errors in atl1 driver, from Tony Zelenoff. 7) Only enable interrupts in 8139cp driver after we've registered the IRQ handler. From Jason Wang. 8) Fix too many reads of KS_CIDER register in ks8851 during probe, fixing crashes on spurious interrupts. From Matt Renzelmann. 9) Missing include in ath5k driver and missing iounmap on probe failure, from Jonathan Bither. 10) Fix RX packet handling in smsc911x driver, from Will Deacon. 11) Fix ixgbe WoL on fiber by leaving the laser on during shutdown. 12) ks8851 needs MAX_RECV_FRAMES increased otherwise the internal MAC buffers are easily overflown. Fix from Davide Cimingahi. 13) Fix memory leaks in peak_usb CAN driver, from Jesper Juhl. 14) gred packet scheduler can dump in WRED more when doing a netlink dump. Fix from David Ward. 15) Fix MTU in USB smsc75xx driver, from Stephane Fillod. 16) Dummy device needs ->ndo_uninit handler to properly handle ->ndo_init failures. From Hiroaki SHIMODA. 17) Fix TX fragmentation in ath9k driver, from Sujith Manoharan. 18) Missing RTNL lock in ixgbe PM resume, from Benjamin Poirier. 19) Missing iounmap in farsync WAN driver, from Julia Lawall. 20) With LRO/GRO, tcp_grow_window() is easily tricked into not growing the receive window properly, and this hurts performance. Fix from Eric Dumazet. 21) Network namespace init failure can leak net_generic data, fix from Julian Anastasov. 22) Fix skb_over_panic due to mis-accounting in TCP for partially ACK'd SKBs. From Eric Dumazet. 23) New IDs for qmi_wwan driver, from Bjørn Mork. 24) Fix races in ax25_exit(), from Eric W. Biederman. 25) IPV6 TCP doesn't handle TCP_MAXSEG socket option properly, copy over logic from the IPV4 side. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: fix TCP_MAXSEG for established IPv6 passive sockets drivers/net: Do not free an IRQ if its request failed drop_monitor: allow more events per second ks8851: Fix request_irq/free_irq mismatch net/hyperv: Adding cancellation to ensure rndis filter is closed ks8851: Fix mutex deadlock in ks8851_net_stop() net ax25: Reorder ax25_exit to remove races. icplus: fix interrupt for IC+ 101A/G and 1001LF net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() ksz884x: don't copy too much in netdev_set_mac_address() tcp: fix retransmit of partially acked frames netns: do not leak net_generic data on failed init net/sock.h: fix sk_peek_off kernel-doc warning tcp: fix tcp_grow_window() for large incoming frames drivers/net/wan/farsync.c: add missing iounmap davinci_mdio: Fix MDIO timeout check ipv6: clean up rt6_clean_expires ipv6: fix rt6_update_expires arcnet: rimi: Fix device name in debug output ...
-
由 Benjamin Herrenschmidt 提交于
This gets rid of the unused default senses array, and replaces the incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for the initial set_trigger() call when mapping an interrupt. This in turn makes us read the HW state and update the irq desc accordingly. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This is meant typically to allow a PIC driver's irq domain map() callback to establish sane defaults for the interrupt (and make sure that the HW and the irq_desc are in sync as far as the trigger is concerned). The irq core may not call the set_trigger callback if it thinks the trigger is already set to the right setting, so we need to ensure new descriptors are properly synchronized with the hardware. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
mpic_is_ipi() takes a virq and immediately converts it to a hw_irq. However, one of the two call sites calls it with a ... hw_irq. The other call site also happens to have the hw_irq at hand, so let's change it to just take that as an argument. Also change mpic_is_tm() for consistency. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
If the interrupt and the timeout happen roughly at the same time, we can get into a situation where the timer function is run while the interrupt has already been processed. In this case, the timer function might end up doing an add_timer on an already pending timer, causing a BUG_ON() to trigger. Instead, just skip the whole timeout operation if we see that the timer is pending. The spinlock ensures that the only way that happens is if we already started a new operation and thus the timeout can be ignored. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The problem was reported by Anton Blanchard. While EEH error happened to the PCI device without the corresponding device driver, kernel crash was seen. Eventually, I successfully reproduced the problem on Firebird-L machine with utility "errinjct". Initially, the device driver for Emulex ethernet MAC has been disabled from .config and force data parity on the Emulex ethernet MAC with help of "errinjct". Eventually, I saw the kernel crash after issueing couple of "lspci -v" command. The root cause behind is that the PCI device, including the reference to the corresponding eeh device, will be removed from the system while EEH does recovery. Afterwards, the PCI device will be probed again and added into the system accordingly. So it's not safe to retrieve the eeh device from the corresponding PCI device after the PCI device has been removed and not added again. The patch fixes the issue and retrieve the eeh device from OF node instead of PCI device after the PCI device has been removed. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Tested-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
由 Neal Cardwell 提交于
Commit f5fff5dc forgot to fix TCP_MAXSEG behavior IPv6 sockets, so IPv6 TCP server sockets that used TCP_MAXSEG would find that the advmss of child sockets would be incorrect. This commit mirrors the advmss logic from tcp_v4_syn_recv_sock in tcp_v6_syn_recv_sock. Eventually this logic should probably be shared between IPv4 and IPv6, but this at least fixes this issue. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2012 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Lee Jones 提交于
Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-