- 11 12月, 2017 4 次提交
-
-
由 Josh Poimboeuf 提交于
When attempting to load a livepatch module, I got the following error: module_64: patch_module: Expect noop after relocate, got 3c820000 The error was triggered by the following code in unregister_netdevice_queue(): 14c: 00 00 00 48 b 14c <unregister_netdevice_queue+0x14c> 14c: R_PPC64_REL24 net_set_todo 150: 00 00 82 3c addis r4,r2,0 GCC didn't insert a nop after the branch to net_set_todo() because it's a sibling call, so it never returns. The nop isn't needed after the branch in that case. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-and-tested-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Kamalesh Babulal 提交于
Livepatch re-uses module loader function apply_relocate_add() to write relocations, instead of managing them by arch-dependent klp_write_module_reloc() function. apply_relocate_add() doesn't understand livepatch symbols (marked with SHN_LIVEPATCH symbol section index) and assumes them to be local symbols by default for R_PPC64_REL24 relocation type. It fails with an error, when trying to calculate offset with local_entry_offset(): module_64: kpatch_meminfo: REL24 -1152921504897399800 out of range! Whereas livepatch symbols are essentially SHN_UNDEF, should be called via stub used for global calls. This issue can be fixed by teaching apply_relocate_add() to handle both SHN_UNDEF/SHN_LIVEPATCH symbols via the same stub. This patch extends SHN_UNDEF code to handle livepatch symbols too. Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
This message isn't terribly useful. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
This statement causes some not very useful messages to always be printed on the serial port at boot, even on quiet boots. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 04 12月, 2017 8 次提交
-
-
由 Cyril Bur 提交于
Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NGustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Santosh Sivaraj 提交于
Current vDSO64 implementation does not have support for coarse clocks (CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME_COARSE), for which it falls back to system call, increasing the response time, vDSO implementation reduces the cycle time. Below is a benchmark of the difference in execution times. (Non-coarse clocks are also included just for completion) clock-gettime-realtime: syscall: 172 nsec/call clock-gettime-realtime: libc: 28 nsec/call clock-gettime-realtime: vdso: 22 nsec/call clock-gettime-monotonic: syscall: 171 nsec/call clock-gettime-monotonic: libc: 30 nsec/call clock-gettime-monotonic: vdso: 25 nsec/call clock-gettime-realtime-coarse: syscall: 153 nsec/call clock-gettime-realtime-coarse: libc: 16 nsec/call clock-gettime-realtime-coarse: vdso: 10 nsec/call clock-gettime-monotonic-coarse: syscall: 167 nsec/call clock-gettime-monotonic-coarse: libc: 17 nsec/call clock-gettime-monotonic-coarse: vdso: 11 nsec/call CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NSantosh Sivaraj <santosh@fossix.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Bhaktipriya Shridhar 提交于
The workqueue "ps3av->wq" queues a single work item &ps3av->work and hence doesn't require ordering. It is involved in waking up ps3avd to do the video mode setting and hence it's not being used on a memory reclaim path. Hence, it has been converted to use system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. The work item has been flushed in ps3av_remove to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Dmitry Torokhov 提交于
Instead of manually coding the loop with of_find_node_by_name(), let's switch to the standard macro for iterating over nodes with given name. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> [mpe: Fix build failures due to typo in mpc832x_mds.c] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Dmitry Torokhov 提交于
We are not using result, so this simply results in a leaked refcount. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Dmitry Torokhov 提交于
We need to call of_node_put() for device nodes obtained with of_find_node_by_name(). Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Joe Perches 提交于
At some point, pr_warning will be removed so all logging messages use a consistent <prefix>_warn style. Update arch/powerpc/ Miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Remove unnecessary line continuations Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NGeoff Levand <geoff@infradead.org> [mpe: Rebase due to some %pOF changes.] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Linus Torvalds 提交于
-
- 03 12月, 2017 4 次提交
-
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "Just one fix this time around, for the late commit in the merge window that triggered a problem with qemu. Qemu is apparently also going to receive a fix for the discovered issue" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: avoid faulting on qemu
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here are two bugfixes for I2C, fixing a memleak in the core and irq allocation for i801. Also three bugfixes for the at24 eeprom driver which Bartosz collected while taking over maintainership for this driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: eeprom: at24: check at24_read/write arguments eeprom: at24: fix reading from 24MAC402/24MAC602 eeprom: at24: correctly set the size for at24mac402 i2c: i2c-boardinfo: fix memory leaks on devinfo i2c: i801: Fix Failed to allocate irq -2147483648 error
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes: - Drop reference to obsolete maintainer tree - Fix overflow bug in pmbus driver - Fix SMBUS timeout problem in jc42 driver For the SMBUS timeout handling, we had a brief discussion if this should be considered a bug fix or a feature. Peter says "it fixes real problems where the application misbehave due to faulty content when reading from an eeprom", and he needs the patch in his company's v4.14 images. This is good enough for me and warrants backport to stable kernels" * tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) optionally try to disable the SMBUS timeout hwmon: (pmbus) Use 64bit math for DIRECT format values hwmon: Drop reference to Jean's tree
-
由 Wolfram Sang 提交于
Merge tag 'at24-4.15-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current Please consider pulling the following fixes for v4.15. While it doesn't fix any regression introduced in the v4.15 merge window, we have a feature in at24 since linux v4.8 - reading the mac address block from at24mac series - which turned out to be not working. This pull request contains changes that fix it together with a patch that hardens the read and write argument sanitization with out-of-bounds checks that were missing.
-
- 02 12月, 2017 11 次提交
-
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Anna Schumaker: "These patches fix a problem with compiling using an old version of gcc, and also fix up error handling in the SUNRPC layer. - NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid" - SUNRPC: Allow connect to return EHOSTUNREACH - SUNRPC: Handle ENETDOWN errors" * tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Handle ENETDOWN errors SUNRPC: Allow connect to return EHOSTUNREACH NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs fixes from Darrick Wong: "Here are some bug fixes for 4.15-rc2. - fix memory leaks that appeared after removing ifork inline data buffer - recover deferred rmap update log items in correct order - fix memory leaks when buffer construction fails - fix memory leaks when bmbt is corrupt - fix some uninitialized variables and math problems in the quota scrubber - add some omitted attribution tags on the log replay commit - fix some UBSAN complaints about integer overflows with large sparse files - implement an effective inode mode check in online fsck - fix log's inability to retry quota item writeout due to transient errors" * tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Properly retry failed dquot items in case of error during buffer writeback xfs: scrub inode mode properly xfs: remove unused parameter from xfs_writepage_map xfs: ubsan fixes xfs: calculate correct offset in xfs_scrub_quota_item xfs: fix uninitialized variable in xfs_scrub_quota xfs: fix leaks on corruption errors in xfs_bmap.c xfs: fortify xfs_alloc_buftarg error handling xfs: log recovery should replay deferred ops in order xfs: always free inline data before resetting inode fork during ifree
-
由 Linus Torvalds 提交于
Merge tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux Pull RISC-V cleanups and ABI fixes from Palmer Dabbelt: "This contains a handful of small cleanups that are a result of feedback that didn't make it into our original patch set, either because the feedback hadn't been given yet, I missed the original emails, or we weren't ready to submit the changes yet. I've been maintaining the various cleanup patch sets I have as their own branches, which I then merged together and signed. Each merge commit has a short summary of the changes, and each branch is based on your latest tag (4.15-rc1, in this case). If this isn't the right way to do this then feel free to suggest something else, but it seems sane to me. Here's a short summary of the changes, roughly in order of how interesting they are. - libgcc.h has been moved from include/lib, where it's the only member, to include/linux. This is meant to avoid tab completion conflicts. - VDSO entries for clock_get/gettimeofday/getcpu have been added. These are simple syscalls now, but we want to let glibc use them from the start so we can make them faster later. - A VDSO entry for instruction cache flushing has been added so userspace can flush the instruction cache. - The VDSO symbol versions for __vdso_cmpxchg{32,64} have been removed, as those VDSO entries don't actually exist. - __io_writes has been corrected to respect the given type. - A new READ_ONCE in arch_spin_is_locked(). - __test_and_op_bit_ord() is now actually ordered. - Various small fixes throughout the tree to enable allmodconfig to build cleanly. - Removal of some dead code in our atomic support headers. - Improvements to various comments in our atomic support headers" * tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: (23 commits) RISC-V: __io_writes should respect the length argument move libgcc.h to include/linux RISC-V: Clean up an unused include RISC-V: Allow userspace to flush the instruction cache RISC-V: Flush I$ when making a dirty page executable RISC-V: Add missing include RISC-V: Use define for get_cycles like other architectures RISC-V: Provide stub of setup_profiling_timer() RISC-V: Export some expected symbols for modules RISC-V: move empty_zero_page definition to C and export it RISC-V: io.h: type fixes for warnings RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros RISC-V: use generic serial.h RISC-V: remove spin_unlock_wait() RISC-V: `sfence.vma` orderes the instruction cache RISC-V: Add READ_ONCE in arch_spin_is_locked() RISC-V: __test_and_op_bit_ord should be strongly ordered RISC-V: Remove smb_mb__{before,after}_spinlock() RISC-V: Remove __smp_bp__{before,after}_atomic RISC-V: Comment on why {,cmp}xchg is ordered how it is ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "The critical one here is a fix for fpsimd register corruption across signals which was introduced by the SVE support code (the register files overlap), but the others are worth having as well. Summary: - Fix FP register corruption when SVE is not available or in use - Fix out-of-tree module build failure when CONFIG_ARM64_MODULE_PLTS=y - Missing 'const' generating errors with LTO builds - Remove unsupported events from Cortex-A73 PMU description - Removal of stale and incorrect comments" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: context: Fix comments and remove pointless smp_wmb() arm64: cpu_ops: Add missing 'const' qualifiers arm64: perf: remove unsupported events for Cortex-A73 arm64: fpsimd: Fix failure to restore FPSIMD state after signals arm64: pgd: Mark pgd_cache as __ro_after_init arm64: ftrace: emit ftrace-mod.o contents through code arm64: module-plts: factor out PLT generation code for ftrace arm64: mm: cleanup stale AIVIVT references
-
由 Palmer Dabbelt 提交于
Olaf said: Here's a short series of patches that produces a working allmodconfig. Would be nice to see them go in so we can add build coverage. I've dropped patches 8 and 10 from the original set: * [PATCH 08/10] (RISC-V: Set __ARCH_WANT_RENAMEAT to pick up generic version) has a better fix that I've sent out for review, we don't want renameat. * [PATCH 10/10] (input: joystick: riscv has get_cycles) has already been taken into Dmitry Torokhov's tree.
-
由 Palmer Dabbelt 提交于
-
由 Palmer Dabbelt 提交于
-
由 Palmer Dabbelt 提交于
This merge contains the user-visible, ABI-breaking changes that we want to make sure we have in Linux before our first release. Highlights include: * VDSO entries for clock_get/gettimeofday/getcpu have been added. These are simple syscalls now, but we want to let glibc use them from the start so we can make them faster later. * A VDSO entry for instruction cache flushing has been added so userspace can flush the instruction cache. * The VDSO symbol versions for __vdso_cmpxchg{32,64} have been removed, as those VDSO entries don't actually exist. Conflicts: arch/riscv/include/asm/tlbflush.h
-
由 Palmer Dabbelt 提交于
This patch set is the result of some feedback that filtered through after our original patch set was reviewed, some of which was the result of me missing some email. It contains: * A new READ_ONCE in arch_spin_is_locked() * __test_and_op_bit_ord() is now actually ordered * Improvements to various comments * Removal of some dead code
-
由 Palmer Dabbelt 提交于
Whoops -- I must have just been being an idiot again. Thanks to Segher for finding the bug :). CC: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Christoph Hellwig 提交于
Introducing a new include/lib directory just for this file totally messes up tab completion for include/linux, which is highly annoying. Move it to include/linux where we have headers for all kinds of other lib/ code as well. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
- 01 12月, 2017 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Two fixes for nasty kexec/kdump crashes in certain configurations. A couple of minor fixes for the new TIDR code. A fix for an oops in a CXL error handling path. Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain" * tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Do not assign thread.tidr if already assigned powerpc: Avoid signed to unsigned conversion in set_thread_tidr() powerpc/kexec: Fix kexec/kdump in P9 guest kernels powerpc/powernv: Fix kexec crashes caused by tlbie tracing cxl: Check if vphb exists before iterating over AFU devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs由 Linus Torvalds 提交于
Pull AFS fixes from David Howells: "Two fix patches for the AFS filesystem: - Fix the refcounting on permit caching. - AFS inode (afs_vnode) fields need resetting after allocation because they're only initialised when slab pages are obtained from the page allocator" * tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Properly reset afs_vnode (inode) fields afs: Fix permit refcounting
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "MMC core: - Ensure that debugfs files are removed properly - Fix missing blk_put_request() - Deal with errors from blk_get_request() - Rewind mmc bus suspend operations at failures - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex MMC host: - sdhci-msm: Make it optional to wait for signal level changes - sdhci: Avoid swiotlb buffer being full" * tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: prepend 0x to OCR entry in sysfs mmc: core: prepend 0x to pre_eol_info entry in sysfs mmc: sdhci: Avoid swiotlb buffer being full mmc: sdhci-msm: Optionally wait for signal level changes mmc: block: Ensure that debugfs files are removed mmc: core: Do not leave the block driver in a suspended state mmc: block: Check return value of blk_get_request() mmc: block: Fix missing blk_put_request()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes and cleanups from Dave Airlie: "The main thing are a bunch of fixes for the new amd display code, a bunch of smatch fixes. core: - Atomic helper regression fix. - Deferred fbdev fallout regression fix. amdgpu: - New display code (dc) dpms, suspend/resume and smatch fixes, along with some others - Some regression fixes for amdkfd/radeon. - Fix a ttm regression for swiotlb disabled bridge: - A bunch of fixes for the tc358767 bridge mali-dp + hdlcd: - some fixes and internal API catchups. imx-drm: -regression fix in atomic code. omapdrm: - platform detection regression fixes" * tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits) drm/imx: always call wait_for_flip_done in commit_tail omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()' drm/i915: Disable THP until we have a GPU read BW W/A drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd drm/ttm: fix populate_and_map() functions once more drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
-
由 Will Deacon 提交于
The comments in the ASID allocator incorrectly hint at an MP-style idiom using the asid_generation and the active_asids array. In fact, the synchronisation is achieved using a combination of an xchg operation and a spinlock, so update the comments and remove the pointless smp_wmb(). Cc: James Morse <james.morse@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Yury Norov 提交于
Building the kernel with an LTO-enabled GCC spits out the following "const" warning for the cpu_ops code: mm/percpu.c:2168:20: error: pcpu_fc_names causes a section type conflict with dt_supported_cpu_ops const char * const pcpu_fc_names[PCPU_FC_NR] __initconst = { ^ arch/arm64/kernel/cpu_ops.c:34:37: note: ‘dt_supported_cpu_ops’ was declared here static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = { Fix it by adding missed const qualifiers. Signed-off-by: NYury Norov <ynorov@caviumnetworks.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Xu YiPing 提交于
bus access read/write events are not supported in A73, based on the Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Fixes: 5561b6c5 "arm64: perf: add support for Cortex-A73" Acked-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NXu YiPing <xuyiping@hisilicon.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Dave Martin 提交于
The fpsimd_update_current_state() function is responsible for loading the FPSIMD state from the user signal frame into the current task during sigreturn. When implementing support for SVE, conditional code was added to this function in order to handle the case where SVE state need to be loaded for the task and merged with the FPSIMD data from the signal frame; however, the FPSIMD-only case was unintentionally dropped. As a result of this, sigreturn does not currently restore the FPSIMD state of the task, except in the case where the system supports SVE and the signal frame contains SVE state in addition to FPSIMD state. This patch fixes this bug by making the copy-in of the FPSIMD data from the signal frame to thread_struct unconditional. This remains a performance regression from v4.14, since the FPSIMD state is now copied into thread_struct and then loaded back, instead of _only_ being loaded into the CPU FPSIMD registers. However, it is essential to call task_fpsimd_load() here anyway in order to ensure that the SVE enable bit in CPACR_EL1 is set correctly before returning to userspace. This could use some refactoring, but since sigreturn is not a fast path I have kept this patch as a pure fix and left the refactoring for later. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 8cd969d2 ("arm64/sve: Signal handling support") Reported-by: NAlex Bennée <alex.bennee@linaro.org> Tested-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NDave Martin <Dave.Martin@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Jinbum Park 提交于
pgd_cache is setup once while init stage and never changed after that, so it is good candidate for __ro_after_init Signed-off-by: NJinbum Park <jinb.park7@gmail.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built with the kernel and contains a trampoline that is linked into each module, so that modules can be loaded far away from the kernel and still reach the ftrace entry point in the core kernel with an ordinary relative branch, as is emitted by the compiler instrumentation code dynamic ftrace relies on. In order to be able to build out of tree modules, this object file needs to be included into the linux-headers or linux-devel packages, which is undesirable, as it makes arm64 a special case (although a precedent does exist for 32-bit PPC). Given that the trampoline essentially consists of a PLT entry, let's not bother with a source or object file for it, and simply patch it in whenever the trampoline is being populated, using the existing PLT support routines. Cc: <stable@vger.kernel.org> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
To allow the ftrace trampoline code to reuse the PLT entry routines, factor it out and move it into asm/module.h. Cc: <stable@vger.kernel.org> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 David Howells 提交于
When an AFS inode is allocated by afs_alloc_inode(), the allocated afs_vnode struct isn't necessarily reset from the last time it was used as an inode because the slab constructor is only invoked once when the memory is obtained from the page allocator. This means that information can leak from one inode to the next because we're not calling kmem_cache_zalloc(). Some of the information isn't reset, in particular the permit cache pointer. Bring the clearances up to date. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com>
-