each tlb's port can be configured to be block or non-blocked.
For blocked port, there will be a req miss slot stored in tlb, but belong to
core pipeline, which means only core pipeline flush will invalid them.

For another, itlb also use PTW Filter but with only 4 entries.
Last, keep svinval extension as usual, still work.


* tlb: add blocked-tlb support, miss frontend changes

* tlb: remove tlb's sameCycle support, result will return at next cycle

* tlb: remove param ShouldBlock, move block method into TLB module

* tlb: fix handle_block's miss_req logic

* mmu.filter: change filter's req.ready to canEnqueue

when filter can't let all the req enqueue, set the req.ready to false.
canEnqueue after filtering has long latency, so we use **_fake
without filtering, but the filter will still receive the reqs if
it can(after filtering).

* mmu.tlb: change name from BTlbPtwIO to VectorTlbPtwIO

* mmu: replace itlb's repeater to filter&repeaternb

* mmu.tlb: add TlbStorageWrapper to make TLB cleaner

more: BlockTlbRequestorIO is same with TlbRequestorIO, rm it

* mmu.tlb: rm unused param in function r_req_apply, fix syntax bug

* [WIP]icache: itlb usage from non-blocked to blocked

* mmu.tlb: change parameter NBWidth to Seq of boolean

* icache.mainpipe: fix itlb's resp.ready, not always true

* mmu.tlb: add kill sigal to blocked req that needs sync but fail

in frontend, icache,itlb,next pipe may not able to sync.
blocked tlb will store miss req ang blocks req, which makes itlb
couldn't work. So add kill logic to let itlb not to store reqs.

One more thing: fix icache's blocked tlb handling logic

* icache.mainpipe: fix tlb's ready_recv logic

icache mainpipe has two ports, but these two ports may not valid
all the same time. So add new signals tlb_need_recv to record whether
stage s1 should wait for the tlb.

* tlb: when flush, just set resp.valid and pf, pf for don't use it

* tlb: flush should concern satp.changed(for blocked io now)

* mmu.tlb: add new flush that doesn't flush reqs

Sfence.vma will flush inflight reqs and flushPipe
But some other sfence(svinval...) will not. So add new flush to
distinguish these two kinds of sfence signal

morw: forget to assign resp result when ptw back, fix it

* mmu.tlb: beautify miss_req_v and miss_v relative logic

* mmu.tlb: fix bug, when ptw back and bypass, concern level to genPPN

bug: when ptw back and bypass, forgot to concern level(1GB/2MB/4KB)
when genPPN.

by the way: some funtions need ": Unit = ", add it.

* mmu.filter: fix bug of canEnqueue, mixed with tlb_req and tlb.req

* icache.mainpipe: fix bug of tlbExcp's usage, & with tlb_need_back

Icache's mainpipe has two ports, but may only port 0 is valid.
When a port is invalid, the tlbexcp should be false.(Actually, should
be ignored).
So & tlb_need_back to fix this bug.

* sfence: instr in svinval ext will also flush pipe

A difficult problem to handle:
Sfence and Svinval will flush MMU, but only Sfence(some svinval)
  will flush pipe. For itlb that some requestors are blocked and
  icache doesn't recv flush for simplicity, itlb's blocked ptw req
  should not be flushed.
It's a huge problem for MMU to handle for good or bad solutions. But
  svinval is seldom used, so disable it's effiency.

* mmu: add parameter to control mmu's sfence delay latency

Difficult problem:
  itlb's blocked req should not be abandoned, but sfence will flush
  all infight reqs. when itlb and itlb repeater's delay is not same(itlb
  is flushed, two cycles later, itlb repeater is flushed, then itlb's
  ptw req after flushing will be also flushed sliently.
So add one parameter to control the flush delay to be the same.

* mmu.tlb: fix bug of csr.priv's delay & sfence valid when req fire

1. csr.priv's delay
csr.priv should not be delayed, csr.satp should be delayed.
for excep/intr will change csr.priv, which will be changed at one
instruction's (commit?). but csrrw satp will not, so satp has more
cycles to delay.
2. sfence
when sfence valid but blocked req fire, resp should still fire.
3. satp in TlbCsrBundle
let high bits of satp.ppn to be 0.U

* tlb&icache.mainpipe: rm commented codes

* mmu: move method genPPN to entry bundle

* l1tlb: divide l1tlb flush into flush_mmu and flush_pipe

Problem:
For l1tlb, there are blocked and non-blocked req ports.
For blocked ports, there are req slots to store missed reqs.
Some mmu flush like Sfence should not flush miss slots for outside
may still need get tlb resp, no matter wrong and correct resp.
For example. sfence will flush mmu and flush pipe, but won't flush
reqs inside icache, which waiting for tlb resp.
For example, svinval instr will flush mmu, but not flush pipe. so
tlb should return correct resp, althrough the ptw req is flushed
when tlb miss.

Solution:
divide l1tlb flush into flush_mmu and flush_pipe.
The req slot is considered to be a part of core pipeline and should
only be flushed by flush_pipe.
flush_mmu will flush mmu entries and inflight ptw reqs.
When miss but sfence flushed its ptw req, re-send.

* l1tlb: code clean, correct comments and rm unused codes

* l2tlb: divide filterSize into ifiterSize and dfilterSize

* l2tlb: prefetch req won't enter miss queue. Rename MSHR to missqueue

* l1tlb: when disable vm, ptw back should not bypass tlb and should let miss req go ahead