提交 b47ff4a3 编写于 作者: M Mauro Carvalho Chehab

[media] move soc_camera to its own directory

That helps to better organize the soc_camera items.

While here, cleanup Makefiles, removing uneeded include dirs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 7ba2f841
......@@ -105,6 +105,13 @@ config VIDEO_M32R_AR_M64278
To compile this driver as a module, choose M here: the
module will be called arv.
config VIDEO_OMAP2
tristate "OMAP2 Camera Capture Interface driver"
depends on VIDEO_DEV && ARCH_OMAP2
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
......@@ -117,101 +124,7 @@ config VIDEO_OMAP3_DEBUG
---help---
Enable debug messages on OMAP 3 camera controller driver.
config SOC_CAMERA
tristate "SoC camera support"
depends on VIDEO_V4L2 && HAS_DMA && I2C
select VIDEOBUF_GEN
select VIDEOBUF2_CORE
help
SoC Camera is a common API to several cameras, not connecting
over a bus like PCI or USB. For example some i2c camera connected
directly to the data bus of an SoC.
config SOC_CAMERA_PLATFORM
tristate "platform camera support"
depends on SOC_CAMERA
help
This is a generic SoC camera platform driver, useful for testing
config MX1_VIDEO
bool
config VIDEO_MX1
tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
select FIQ
select VIDEOBUF_DMA_CONTIG
select MX1_VIDEO
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
config MX3_VIDEO
bool
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF2_DMA_CONTIG
select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_SH_MOBILE_CSI2
tristate "SuperH Mobile MIPI CSI-2 Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
---help---
This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
select VIDEOBUF2_DMA_CONTIG
---help---
This is a v4l2 driver for the SuperH Mobile CEU Interface
config VIDEO_OMAP1
tristate "OMAP1 Camera Interface driver"
depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP1 camera interface
config VIDEO_OMAP2
tristate "OMAP2 Camera Capture Interface driver"
depends on VIDEO_DEV && ARCH_OMAP2
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
config VIDEO_MX2_HOSTSUPPORT
bool
config VIDEO_MX2
tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
select VIDEOBUF2_DMA_CONTIG
select VIDEO_MX2_HOSTSUPPORT
---help---
This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
Interface
config VIDEO_ATMEL_ISI
tristate "ATMEL Image Sensor Interface (ISI) support"
depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
select VIDEOBUF2_DMA_CONTIG
---help---
This module makes the ATMEL Image Sensor Interface available
as a v4l2 device.
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/s5p-fimc/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
......
......@@ -5,41 +5,25 @@
omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o
obj-$(CONFIG_VIDEO_VINO) += indycam.o
obj-$(CONFIG_VIDEO_VINO) += vino.o
obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o
obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o
obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o
obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/
obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o
obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
# soc-camera host drivers have to be linked after camera drivers
obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o
obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o
obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
obj-$(CONFIG_VIDEO_CODA) += coda.o
obj-$(CONFIG_VIDEO_CODA) += coda.o
obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o
......@@ -59,8 +43,3 @@ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
obj-y += davinci/
obj-$(CONFIG_ARCH_OMAP) += omap/
ccflags-y += -I$(srctree)/drivers/media/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
ccflags-y += -I$(srctree)/drivers/media/tuners
ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera
config SOC_CAMERA
tristate "SoC camera support"
depends on VIDEO_V4L2 && HAS_DMA && I2C
select VIDEOBUF_GEN
select VIDEOBUF2_CORE
help
SoC Camera is a common API to several cameras, not connecting
over a bus like PCI or USB. For example some i2c camera connected
directly to the data bus of an SoC.
config SOC_CAMERA_PLATFORM
tristate "platform camera support"
depends on SOC_CAMERA
help
This is a generic SoC camera platform driver, useful for testing
config MX1_VIDEO
bool
config VIDEO_MX1
tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
select FIQ
select VIDEOBUF_DMA_CONTIG
select MX1_VIDEO
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
config MX3_VIDEO
bool
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF2_DMA_CONTIG
select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_SH_MOBILE_CSI2
tristate "SuperH Mobile MIPI CSI-2 Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
---help---
This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
select VIDEOBUF2_DMA_CONTIG
---help---
This is a v4l2 driver for the SuperH Mobile CEU Interface
config VIDEO_OMAP1
tristate "OMAP1 Camera Interface driver"
depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP1 camera interface
config VIDEO_MX2_HOSTSUPPORT
bool
config VIDEO_MX2
tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
select VIDEOBUF2_DMA_CONTIG
select VIDEO_MX2_HOSTSUPPORT
---help---
This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
Interface
config VIDEO_ATMEL_ISI
tristate "ATMEL Image Sensor Interface (ISI) support"
depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
select VIDEOBUF2_DMA_CONTIG
---help---
This module makes the ATMEL Image Sensor Interface available
as a v4l2 device.
obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
# soc-camera host drivers have to be linked after camera drivers
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o
obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o
obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o
ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册