Skip to content

R
rt-thread

Mr_Pangza / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 f30a03f0 编写于 作者: xuzhuoyi96's avatar xuzhuoyi96
浏览文件
操作

[bsp/stm32] Add STM32G4xx_HAL library

上级 67bb485d
展开全部 隐藏空白更改
内联 并排
Showing with 414227 addition and 0 deletion
bsp/stm32/libraries/Kconfig
浏览文件 @ f30a03f0
......@@ -41,6 +41,11 @@ config SOC_SERIES_STM32G0
select ARCH_ARM_CORTEX_M0
select SOC_FAMILY_STM32
config SOC_SERIES_STM32G4
bool
select ARCH_ARM_CORTEX_M4
select SOC_FAMILY_STM32
config SOC_SERIES_STM32H7
bool
select ARCH_ARM_CORTEX_M7
......
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Include/stm32g4xx.h 0 → 100644
浏览文件 @ f30a03f0
/**
******************************************************************************
* @file stm32g4xx.h
* @author MCD Application Team
* @brief CMSIS STM32G4xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32G4xx device used in the target application
* - To use or not the peripherals drivers in application code(i.e.
* code will be based on direct access to peripherals registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32g4xx
* @{
*/
#ifndef __STM32G4xx_H
#define __STM32G4xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32G4)
#define STM32G4
#endif /* STM32G4 */
/* Uncomment the line below according to the target STM32G4 device used in your
application
*/
#if !defined (STM32G431xx) && !defined (STM32G441xx) && \
!defined (STM32G471xx) && !defined (STM32G473xx) && !defined (STM32G474xx) && !defined (STM32G483xx) && !defined (STM32G484xx) && !defined (STM32GBK1CB)
/* #define STM32G431xx */ /*!< STM32G431xx Devices */
/* #define STM32G441xx */ /*!< STM32G441xx Devices */
/* #define STM32G471xx */ /*!< STM32G471xx Devices */
/* #define STM32G473xx */ /*!< STM32G473xx Devices */
/* #define STM32G483xx */ /*!< STM32G483xx Devices */
/* #define STM32G474xx */ /*!< STM32G474xx Devices */
/* #define STM32G484xx */ /*!< STM32G484xx Devices */
/* #define STM32GBK1CB */ /*!< STM32GBK1CB Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number $VERSION$
*/
#define __STM32G4_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32G4_CMSIS_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
#define __STM32G4_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define __STM32G4_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32G4_CMSIS_VERSION ((__STM32G4_CMSIS_VERSION_MAIN << 24)\
|(__STM32G4_CMSIS_VERSION_SUB1 << 16)\
|(__STM32G4_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32G4_CMSIS_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32G431xx)
#include "stm32g431xx.h"
#elif defined(STM32G441xx)
#include "stm32g441xx.h"
#elif defined(STM32G471xx)
#include "stm32g471xx.h"
#elif defined(STM32G473xx)
#include "stm32g473xx.h"
#elif defined(STM32G483xx)
#include "stm32g483xx.h"
#elif defined(STM32G474xx)
#include "stm32g474xx.h"
#elif defined(STM32G484xx)
#include "stm32g484xx.h"
#elif defined(STM32GBK1CB)
#include "stm32gbk1cb.h"
#else
#error "Please select first the target STM32G4xx device used in your application (in stm32g4xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
SUCCESS = 0,
ERROR = !SUCCESS
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32g4xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __STM32G4xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Include/system_stm32g4xx.h 0 → 100644
浏览文件 @ f30a03f0
/**
******************************************************************************
* @file system_stm32g4xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-M4 Device System Source File for STM32G4xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32g4xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32G4XX_H
#define __SYSTEM_STM32G4XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32G4xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G4xx_System_Exported_Variables
* @{
*/
/* The SystemCoreClock variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
/**
* @}
*/
/** @addtogroup STM32G4xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G4xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G4xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32G4XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Release_Notes.html 0 → 100644
浏览文件 @ f30a03f0
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta charset="utf-8" />
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for STM32G4xx CMSIS</title>
<style type="text/css">
code{white-space: pre-wrap;}
span.smallcaps{font-variant: small-caps;}
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
<link rel="stylesheet" href="../../../../../_htmresc/mini-st.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
<div class="card fluid">
<div class="sectione dark">
<center>
<h1 id="release-notes-for-stm32g4xx-cmsis"><small>Release Notes for</small> STM32G4xx CMSIS</h1>
<p>Copyright © 2019 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img src="../../../../../_htmresc/st_logo.png" alt="ST logo" /></a>
</center>
</div>
</div>
<h1 id="license">License</h1>
<p>This software component is licensed by ST under Apache 2.0 license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:</p>
<p><a href="https://opensource.org/licenses/Apache-2.0">https://opensource.org/licenses/Apache-2.0</a></p>
<h1 id="purpose">Purpose</h1>
<p>This driver provides the CMSIS device for the stm32g4xx products. This covers following series :</p>
<ul>
<li><p>STM32G431/41xx</p></li>
<li><p>STM32G471xx</p></li>
<li><p>STM32G473/83xx</p></li>
<li><p>STM32G474/84xx</p></li>
</ul>
<p>This driver is composed of the descriptions of the registers under “Include” directory.</p>
<p>Various template file are provided to easily build an application. They can be adapted to fit applications requirements.</p>
<ul>
<li>Templates/system_stm32g4xx.c contains the initialization code referred as SystemInit.</li>
<li>Startup files are provided as example for IAR©, KEIL© and SW4STM32©.</li>
<li>Linker files are provided as example for IAR©, KEIL© and SW4STM32©.</li>
</ul>
</div>
<div class="col-sm-12 col-lg-8">
<h1 id="update-history">Update History</h1>
<div class="collapse">
<input type="checkbox" id="collapse-section2" checked aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 28-June-2019</label>
<div>
<h2 id="main-changes">Main Changes</h2>
<h3 id="maintenance-release">Maintenance release</h3>
<p>Maintenance release of CMSIS Devices drivers supporting STM32G431xx, STM32G441xx, STM32G471xx, STM32G473xx, <strong>STM32G483xx</strong>, STM32G474xx and STM32G484xx devices</p>
<h2 id="contents">Contents</h2>
<table>
<caption>Additional features<br />
</caption>
<thead>
<tr class="header">
<th style="text-align: left;">Headline</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td style="text-align: left;">[STM32G483xx} New CMSIS driver files to support STM32G483xx</td>
</tr>
<tr class="even">
<td style="text-align: left;">[STM32G471] <strong>Enable ADC3 for STM32G471 product</strong></td>
</tr>
<tr class="odd">
<td style="text-align: left;">[COMP] <strong>Suppress of Deglitcher mode</strong> - not supported on STM32G4 series</td>
</tr>
</tbody>
</table>
<table>
<caption>Fixed bugs list<br />
</caption>
<thead>
<tr class="header">
<th>Headline</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td>[COMP] Suppress of Deglitcher mode not supported on STM32G4 series</td>
</tr>
<tr class="even">
<td>[HRTIM] Wrong definition of HRTIM1_TIMx constants</td>
</tr>
<tr class="odd">
<td>[MDK-ARM] fix issue in startup file : invalid config wizard annotations</td>
</tr>
</tbody>
</table>
<h2 id="known-limitations">Known Limitations</h2>
<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
<li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
</ul>
<h2 id="supported-devices-and-boards">Supported Devices and boards</h2>
<ul>
<li>STM32G431xx, STM32G441xx devices</li>
<li>STM32G471xx devices</li>
<li>STM32G473xx, <strong>STM32G483xx</strong> devices</li>
<li>STM32G474xx, STM32G484xx devices</li>
</ul>
<p>Note: in the section above, main changes are highlighted in <strong>bold</strong> since previous release.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.0.0 / 12-April-2019</label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<h3 id="first-release">First release</h3>
<p>First official release for STM32G4xx devices</p>
<h2 id="contents-1">Contents</h2>
<p>CMSIS devices files for STM32G431xx, STM32G441xx, STM32G471xx, STM32G473xx, STM32G474xx and STM32G484xx.</p>
<h2 id="known-limitations-1">Known Limitations</h2>
<table>
<thead>
<tr class="header">
<th style="text-align: left;">Headline</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td style="text-align: left;">Support of STM32G483xx device in CMSIS</td>
</tr>
</tbody>
</table>
<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
<li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
</ul>
<h2 id="supported-devices-and-boards-1">Supported Devices and boards</h2>
<ul>
<li>STM32G431xx, STM32G441xx devices</li>
<li>STM32G471xx devices</li>
<li>STM32G473xx devices</li>
<li>STM32G474xx, STM32G484xx devices</li>
</ul>
</div>
</div>
</div>
</div>
<footer class="sticky">
<p>For complete documentation on STM32G4xx, visit: [<a href="http://www.st.com/stm32g4">www.st.com/stm32g4</a>]</p>
</footer>
</body>
</html>
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/arm/startup_stm32g431xx.s 0 → 100644
浏览文件 @ f30a03f0
;*******************************************************************************
;* @File Name : startup_stm32g431xx.s
;* @Author : MCD Application Team
;* @Brief : Vector table for MDK-ARM toolchain
;*******************************************************************************
;* Description : STM32G431xx Mainstream devices vector table for
;* MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* @attention
;*
;* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.</center></h2>
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;*******************************************************************************
;* <<< Use Configuration Wizard in Context Menu >>>
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD RTC_TAMP_LSECSS_IRQHandler ; RTC, TAMP and RCC LSE_CSS through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD 0 ; Reserved
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
DCD USB_HP_IRQHandler ; USB Device High Priority
DCD USB_LP_IRQHandler ; USB Device Low Priority
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break, Transition error, Index error and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger, Commutation, Direction change, Index and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
DCD TIM8_BRK_IRQHandler ; TIM8 Break, Transition error and Index error Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger, Commutation, Direction change and Index Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD 0 ; Reserved
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&3 underrun errors
DCD TIM7_DAC_IRQHandler ; TIM7 and DAC2&4 underrun errors
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD UCPD1_IRQHandler ; UCPD1
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
DCD COMP4_IRQHandler ; COMP4
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CRS_IRQHandler ; CRS Interrupt
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FPU_IRQHandler ; FPU
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD LPUART1_IRQHandler ; LP UART 1 interrupt
DCD I2C3_EV_IRQHandler ; I2C3 Event
DCD I2C3_ER_IRQHandler ; I2C3 Error
DCD DMAMUX_OVR_IRQHandler ; DMAMUX overrun global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CORDIC_IRQHandler ; CORDIC
DCD FMAC_IRQHandler ; FMAC
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT RTC_TAMP_LSECSS_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_IRQHandler [WEAK]
EXPORT USB_LP_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_DAC_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT UCPD1_IRQHandler [WEAK]
EXPORT COMP1_2_3_IRQHandler [WEAK]
EXPORT COMP4_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT DMAMUX_OVR_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
RTC_TAMP_LSECSS_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
ADC1_2_IRQHandler
USB_HP_IRQHandler
USB_LP_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
USBWakeUp_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
LPTIM1_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
TIM6_DAC_IRQHandler
TIM7_DAC_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
UCPD1_IRQHandler
COMP1_2_3_IRQHandler
COMP4_IRQHandler
CRS_IRQHandler
SAI1_IRQHandler
FPU_IRQHandler
RNG_IRQHandler
LPUART1_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
DMAMUX_OVR_IRQHandler
DMA2_Channel6_IRQHandler
CORDIC_IRQHandler
FMAC_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/arm/startup_stm32g441xx.s 0 → 100644
浏览文件 @ f30a03f0
;*******************************************************************************
;* @File Name : startup_stm32g441xx.s
;* @Author : MCD Application Team
;* @Brief : Vector table for MDK-ARM toolchain
;*******************************************************************************
;* Description : STM32G441xx Mainstream devices vector table for
;* MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* @attention
;*
;* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.</center></h2>
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;*******************************************************************************
;* <<< Use Configuration Wizard in Context Menu >>>
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD RTC_TAMP_LSECSS_IRQHandler ; RTC, TAMP and RCC LSE_CSS through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD 0 ; Reserved
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
DCD USB_HP_IRQHandler ; USB Device High Priority
DCD USB_LP_IRQHandler ; USB Device Low Priority
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break, Transition error, Index error and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger, Commutation, Direction change, Index and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
DCD TIM8_BRK_IRQHandler ; TIM8 Break, Transition error and Index error Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger, Commutation, Direction change and Index Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD 0 ; Reserved
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&3 underrun errors
DCD TIM7_DAC_IRQHandler ; TIM7 and DAC2&4 underrun errors
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD UCPD1_IRQHandler ; UCPD1
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
DCD COMP4_IRQHandler ; COMP4
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CRS_IRQHandler ; CRS Interrupt
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FPU_IRQHandler ; FPU
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD AES_IRQHandler ; AES global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD LPUART1_IRQHandler ; LP UART 1 interrupt
DCD I2C3_EV_IRQHandler ; I2C3 Event
DCD I2C3_ER_IRQHandler ; I2C3 Error
DCD DMAMUX_OVR_IRQHandler ; DMAMUX overrun global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CORDIC_IRQHandler ; CORDIC
DCD FMAC_IRQHandler ; FMAC
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT RTC_TAMP_LSECSS_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_IRQHandler [WEAK]
EXPORT USB_LP_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_DAC_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT UCPD1_IRQHandler [WEAK]
EXPORT COMP1_2_3_IRQHandler [WEAK]
EXPORT COMP4_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT AES_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT DMAMUX_OVR_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
RTC_TAMP_LSECSS_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
ADC1_2_IRQHandler
USB_HP_IRQHandler
USB_LP_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
USBWakeUp_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
LPTIM1_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
TIM6_DAC_IRQHandler
TIM7_DAC_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
UCPD1_IRQHandler
COMP1_2_3_IRQHandler
COMP4_IRQHandler
CRS_IRQHandler
SAI1_IRQHandler
FPU_IRQHandler
AES_IRQHandler
RNG_IRQHandler
LPUART1_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
DMAMUX_OVR_IRQHandler
DMA2_Channel6_IRQHandler
CORDIC_IRQHandler
FMAC_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/arm/startup_stm32gbk1cb.s 0 → 100644
浏览文件 @ f30a03f0
;*******************************************************************************
;* @File Name : startup_stm32gbk1cb.s
;* @Author : MCD Application Team
;* @Brief : Vector table for MDK-ARM toolchain
;*******************************************************************************
;* Description : STM32GBK1CB Mainstream devices vector table for
;* MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* @attention
;*
;* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.</center></h2>
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;*******************************************************************************
;* <<< Use Configuration Wizard in Context Menu >>>
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD RTC_TAMP_LSECSS_IRQHandler ; RTC, TAMP and RCC LSE_CSS through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD 0 ; Reserved
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
DCD USB_HP_IRQHandler ; USB Device High Priority
DCD USB_LP_IRQHandler ; USB Device Low Priority
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break, Transition error, Index error and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger, Commutation, Direction change, Index and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
DCD TIM8_BRK_IRQHandler ; TIM8 Break, Transition error and Index error Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger, Commutation, Direction change and Index Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD 0 ; Reserved
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&3 underrun errors
DCD TIM7_DAC_IRQHandler ; TIM7 and DAC2&4 underrun errors
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD UCPD1_IRQHandler ; UCPD1
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
DCD COMP4_IRQHandler ; COMP4
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CRS_IRQHandler ; CRS Interrupt
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FPU_IRQHandler ; FPU
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD LPUART1_IRQHandler ; LP UART 1 interrupt
DCD I2C3_EV_IRQHandler ; I2C3 Event
DCD I2C3_ER_IRQHandler ; I2C3 Error
DCD DMAMUX_OVR_IRQHandler ; DMAMUX overrun global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CORDIC_IRQHandler ; CORDIC
DCD FMAC_IRQHandler ; FMAC
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT RTC_TAMP_LSECSS_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_IRQHandler [WEAK]
EXPORT USB_LP_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_DAC_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT UCPD1_IRQHandler [WEAK]
EXPORT COMP1_2_3_IRQHandler [WEAK]
EXPORT COMP4_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT DMAMUX_OVR_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
RTC_TAMP_LSECSS_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
ADC1_2_IRQHandler
USB_HP_IRQHandler
USB_LP_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
USBWakeUp_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
LPTIM1_IRQHandler
SPI3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_DAC_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
UCPD1_IRQHandler
COMP1_2_3_IRQHandler
COMP4_IRQHandler
CRS_IRQHandler
SAI1_IRQHandler
FPU_IRQHandler
RNG_IRQHandler
LPUART1_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
DMAMUX_OVR_IRQHandler
DMA2_Channel6_IRQHandler
CORDIC_IRQHandler
FMAC_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/gcc/startup_stm32g431xx.s 0 → 100644
浏览文件 @ f30a03f0
/**
******************************************************************************
* @file startup_stm32g431xx.s
* @author MCD Application Team
* @brief STM32G431xx devices vector table GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
ldr r0, =_sdata
ldr r1, =_edata
ldr r2, =_sidata
movs r3, #0
b LoopCopyDataInit
CopyDataInit:
ldr r4, [r2, r3]
str r4, [r0, r3]
adds r3, r3, #4
LoopCopyDataInit:
adds r4, r0, r3
cmp r4, r1
bcc CopyDataInit
/* Zero fill the bss segment. */
ldr r2, =_sbss
ldr r4, =_ebss
movs r3, #0
b LoopFillZerobss
FillZerobss:
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
cmp r2, r4
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word RTC_TAMP_LSECSS_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word 0
.word ADC1_2_IRQHandler
.word USB_HP_IRQHandler
.word USB_LP_IRQHandler
.word FDCAN1_IT0_IRQHandler
.word FDCAN1_IT1_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_IRQHandler
.word TIM8_UP_IRQHandler
.word TIM8_TRG_COM_IRQHandler
.word TIM8_CC_IRQHandler
.word 0
.word 0
.word LPTIM1_IRQHandler
.word 0
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word UCPD1_IRQHandler
.word COMP1_2_3_IRQHandler
.word COMP4_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word CRS_IRQHandler
.word SAI1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word FPU_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word RNG_IRQHandler
.word LPUART1_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word DMAMUX_OVR_IRQHandler
.word 0
.word 0
.word DMA2_Channel6_IRQHandler
.word 0
.word 0
.word CORDIC_IRQHandler
.word FMAC_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak RTC_TAMP_LSECSS_IRQHandler
.thumb_set RTC_TAMP_LSECSS_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_IRQHandler
.thumb_set USB_HP_IRQHandler,Default_Handler
.weak USB_LP_IRQHandler
.thumb_set USB_LP_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_IRQHandler
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
.weak TIM8_UP_IRQHandler
.thumb_set TIM8_UP_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_IRQHandler
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak UCPD1_IRQHandler
.thumb_set UCPD1_IRQHandler,Default_Handler
.weak COMP1_2_3_IRQHandler
.thumb_set COMP1_2_3_IRQHandler,Default_Handler
.weak COMP4_IRQHandler
.thumb_set COMP4_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak DMAMUX_OVR_IRQHandler
.thumb_set DMAMUX_OVR_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g431xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x100027FF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g431xx_sram.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x20001FFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20002000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x100027FF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g441xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x100027FF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g441xx_sram.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x20001FFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20002000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x100027FF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g471xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g471xx_sram.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x20009FFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x2000A000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g473xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g473xx_sram.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x20009FFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x2000A000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g474xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g474xx_sram.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x20009FFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x2000A000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/linker/stm32g481xx_flash.icf 0 → 100644
浏览文件 @ f30a03f0
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_CCMSRAM_start__ = 0x10000000;
define symbol __ICFEDIT_region_CCMSRAM_end__ = 0x10007FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region CCMSRAM_region = mem:[from __ICFEDIT_region_CCMSRAM_start__ to __ICFEDIT_region_CCMSRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };
place in CCMSRAM_region { };
bsp/stm32/libraries/STM32G4xx_HAL/SConscript 0 → 100644
浏览文件 @ f30a03f0
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或