提交 1f7c8234 编写于 作者: E Emil Medve 提交者: Linus Torvalds

Make the pr_*() family of macros in kernel.h complete

Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was
defined multiple times in several other places
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: NSatyam Sharma <satyam@infradead.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 76181c13
......@@ -49,8 +49,6 @@
#define DRIVER_NAME "menelaus"
#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
#define MENELAUS_I2C_ADDRESS 0x72
#define MENELAUS_REV 0x01
......@@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
if (val < 0) {
pr_err("write error");
pr_err(DRIVER_NAME ": write error");
return val;
}
......@@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
if (val < 0)
pr_err("read error");
pr_err(DRIVER_NAME ": read error");
return val;
}
......@@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
pr_err("device not found");
pr_err(DRIVER_NAME ": device not found");
err = -ENODEV;
goto fail1;
}
......@@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
res = i2c_add_driver(&menelaus_i2c_driver);
if (res < 0) {
pr_err("driver registration failed\n");
pr_err(DRIVER_NAME ": driver registration failed\n");
return res;
}
......
......@@ -494,7 +494,4 @@ struct spider_net_card {
struct spider_net_descr darray[0];
};
#define pr_err(fmt,arg...) \
printk(KERN_ERR fmt ,##arg)
#endif
......@@ -28,8 +28,6 @@
#define MODULE_NAME "omapfb-lcd_h3"
#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
......@@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
pr_err("Unable to turn on LCD panel\n");
pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
return r;
}
......@@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
pr_err("Unable to turn off LCD panel\n");
pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}
static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
......
......@@ -27,20 +27,18 @@
#define MODULE_NAME "omapfb-lcd_h3"
#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
int r = 0;
if (omap_request_gpio(14)) {
pr_err("can't request GPIO 14\n");
pr_err(MODULE_NAME ": can't request GPIO 14\n");
r = -1;
goto exit;
}
if (omap_request_gpio(15)) {
pr_err("can't request GPIO 15\n");
pr_err(MODULE_NAME ": can't request GPIO 15\n");
omap_free_gpio(14);
r = -1;
goto exit;
......
......@@ -251,10 +251,25 @@ extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len);
#define hex_asc(x) "0123456789abcdef"[x]
#define pr_emerg(fmt, arg...) \
printk(KERN_EMERG fmt, ##arg)
#define pr_alert(fmt, arg...) \
printk(KERN_ALERT fmt, ##arg)
#define pr_crit(fmt, arg...) \
printk(KERN_CRIT fmt, ##arg)
#define pr_err(fmt, arg...) \
printk(KERN_ERR fmt, ##arg)
#define pr_warning(fmt, arg...) \
printk(KERN_WARNING fmt, ##arg)
#define pr_notice(fmt, arg...) \
printk(KERN_NOTICE fmt, ##arg)
#define pr_info(fmt, arg...) \
printk(KERN_INFO fmt, ##arg)
#ifdef DEBUG
/* If you are writing a driver, please use dev_dbg instead */
#define pr_debug(fmt,arg...) \
printk(KERN_DEBUG fmt,##arg)
#define pr_debug(fmt, arg...) \
printk(KERN_DEBUG fmt, ##arg)
#else
static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...)
{
......@@ -262,9 +277,6 @@ static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *
}
#endif
#define pr_info(fmt,arg...) \
printk(KERN_INFO fmt,##arg)
/*
* Display an IP address in readable format.
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册