git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1394 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1390 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1388 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1387 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1386 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1384 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1382 bbd45198-f89e-11dd-88c7-29a3b14d5316

if define RT_USING_RTGUI in rtconfig.h
must be compiled by full edition of IAR Embedded Workbench
else
can be compiled by 32KB KickStart edition 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1377 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1364 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1362 bbd45198-f89e-11dd-88c7-29a3b14d5316

1. Add IIC slave mode RX by interrupt function (Now, master mode TX/RX and slave mode RX functions are done)
2. Add Timer1 configuration in timer driver
3. Modify the ACMP default initialization setting 
4. Add on/off switch for debug code to reduce size

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1353 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1343 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1342 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1340 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1333 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1331 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1329 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1327 bbd45198-f89e-11dd-88c7-29a3b14d5316

add cpu usage displaying
control LED3 by ADC

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1326 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1318 bbd45198-f89e-11dd-88c7-29a3b14d5316

add LCD/ADC/KEY/LED device support
using RTGUI to display the ADC and key status on the 128x64 LCD

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1317 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1316 bbd45198-f89e-11dd-88c7-29a3b14d5316

change the HEAP size from 0x400 to 0x0 in the FM3_easy_kit project

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1315 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1314 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1307 bbd45198-f89e-11dd-88c7-29a3b14d5316

change line 383 
from
"lcd->parent.open = rt_lcd_close;" 
to
"lcd->parent.close = rt_lcd_close;" 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1300 bbd45198-f89e-11dd-88c7-29a3b14d5316

avoid to include C:\Keil\ARM\RV31\INC\core_cm3.h

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1299 bbd45198-f89e-11dd-88c7-29a3b14d5316

running a LED thread

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1298 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1297 bbd45198-f89e-11dd-88c7-29a3b14d5316

1. Update the copyright information
 - 2009 => 2011
2. Add external oscillator configuration routine in "rt_hw_board_init()"
 - Before, it is set by default frequency, 32MHz
 - Now it can be set by user specified frequency
3. Add ADC and ACMP (analog comparator) drivers
4. Clarify the MCU and target board define in "rtconfig.py"

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1296 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1295 bbd45198-f89e-11dd-88c7-29a3b14d5316

As you know, most branches of RT-thread project has used "scons" tools to compile project or construct MDK project automatically for specific branch. this is a very simple and effective method.Now this method could have been available for sep4020, and the necessary script files has been wrote and uploaded.  

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1293 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1292 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1291 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1290 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1285 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1284 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1283 bbd45198-f89e-11dd-88c7-29a3b14d5316

now the scons support three CROSS_TOOL(gcc, keil, iar)in the stm3210 branch

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1280 bbd45198-f89e-11dd-88c7-29a3b14d5316

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1279 bbd45198-f89e-11dd-88c7-29a3b14d5316