The sem that has been created should be deleted. The sem that has been
inited should be detached.

There can be a race condition that the sem has alread been detached
after we did the cleanup. Besides, there is a RT_IPC_CMD_RESET command
in rt_sem_control which is more clear in setting the sem values.

update bsp/simulator

clean code in SConstruct and application.c, disable RTGUI in rtconfig.h
by default.

Sqlite

fixed _sys_read()/_sys_write() issues.

finsh: fix finsh device setting

It is a big patch for stm32f0x, see the fellow :

1. rt_console_get_device should be call to set shell device only when it is null, or it will make finsh_set_device useless.
2. RT_USING_CONSOLE can be disabled in bsp/rtconfig.h

Cortex r4

Unit of "byte" is more intuitive than "long".

As the svc stack is the stack of threads, there is no need to allocate a
separate stack for the startup. Reuse the IRQ stack should be OK.

Tested on rm48 board.

    1. fix heap management for stm32f0xx(SRAM=8k)
    2. add USART1, USART2 driver for stm32f051R8
    3. fix finsh support for stm32f0x
    4. fix board components initial for stm32f0x and open debug msg
    5. add led driver(pc9) and test thread for stm32f0discovery board
    6. add init thread for stm32f0x do components initial
    7. add rcc initial for stm32f0x in rt_hw_board_init()
    8. add print rcc freq information function

the console output example is:
    SYSCLK_Frequency is 48000000HZ
    PCLK_Frequency is 48000000HZ
    HCLK_Frequency is 48000000HZ
    CECCLK_Frequency is 32786HZ
    ADCCLK_Frequency is 14000000HZ
    USART1CLK_Frequency is 48000000HZ
    I2C1CLK_Frequency is 8000000HZ
    SystemCoreClock is 48000000HZ
    initialize rti_start:0 done

    \ | /
    - RT -     Thread Operating System
    / | \     1.2.0 build Nov 15 2013
    2006 - 2013 Copyright by rt-thread team
    do components intialization.
    initialize rti_board_end:0 done
    initialize rt_hw_led_init:32768 done
    initialize finsh_system_init:0 done
    finsh>>

freemodbus: fix eol

On Windows platform, please set `autocrlf = true` and on Linux, please
set `autocrlf = input`.

net: add freemodbus master and slave v1.6.0