Merge branch 'master' into lwip-debug

bsp/gd32450z-eval/.config

@@ -13,13 +13,22 @@ CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
 CONFIG_RT_TICK_PER_SECOND=100
-CONFIG_RT_DEBUG=y
 CONFIG_RT_USING_OVERFLOW_CHECK=y
-CONFIG_RT_DEBUG_INIT=0
-CONFIG_RT_DEBUG_THREAD=0
 CONFIG_RT_USING_HOOK=y
+CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 # CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_DEBUG=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
 
 #
 # Inter-Thread communication
@@ -46,6 +55,7 @@ CONFIG_RT_USING_HEAP=y
 # Kernel Device Object
 #
 CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
@@ -81,6 +91,7 @@ CONFIG_FINSH_CMD_SIZE=80
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_USING_MSH_DEFAULT=y
 # CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
 
 #
 # Device virtual file system
@@ -89,7 +100,7 @@ CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=4
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
-CONFIG_DFS_FD_MAX=8
+CONFIG_DFS_FD_MAX=16
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -108,7 +119,6 @@ CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
 # CONFIG_RT_DFS_ELM_USE_ERASE is not set
 CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DFS_DEVFS=y
-CONFIG_RT_USING_DFS_NET=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_DFS_UFFS is not set
@@ -119,12 +129,14 @@ CONFIG_RT_USING_DFS_NET=y
 # Device Drivers
 #
 CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
 CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
 # CONFIG_RT_USING_RTC is not set
@@ -132,6 +144,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_WIFI is not set
+# CONFIG_RT_USING_AUDIO is not set
 
 #
 # Using USB
@@ -150,8 +163,20 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_RT_USING_POSIX_AIO is not set
 
 #
-# Network stack
+# Network
+#
+
+#
+# Socket abstraction layer
 #
+CONFIG_RT_USING_SAL=y
+
+#
+# protocol stack implement
+#
+CONFIG_SAL_USING_LWIP=y
+CONFIG_SAL_USING_POSIX=y
+CONFIG_SAL_PROTO_FAMILIES_NUM=4
 
 #
 # light weight TCP/IP stack
@@ -224,20 +249,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # RT-Thread online packages
 #
 
-#
-# system packages
-#
-
-#
-# RT-Thread GUI Engine
-#
-# CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_LWEXT4 is not set
-# CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_SQLITE is not set
-# CONFIG_PKG_USING_RTI is not set
-# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
-
 #
 # IoT - internet of things
 #
@@ -246,6 +257,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_MONGOOSE is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
@@ -268,6 +280,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
 # CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
 
 #
 # security packages
@@ -279,6 +292,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 #
 # language packages
 #
+# CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 
@@ -286,6 +300,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # multimedia packages
 #
 # CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
 
 #
 # tools packages
@@ -294,41 +309,48 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_EASYFLASH is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
-# CONFIG_PKG_USING_IPERF is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_STM32F4_HAL is not set
+# CONFIG_PKG_USING_STM32F4_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
 
 #
 # miscellaneous packages
 #
+# CONFIG_PKG_USING_OPTPARSE is not set
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
-# CONFIG_PKG_USING_SAMPLES is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
 
 #
-# example package: hello
-#
-# CONFIG_PKG_USING_HELLO is not set
-
-#
-# Privated Packages of RealThread
+# sample package
 #
-# CONFIG_PKG_USING_CODEC is not set
-# CONFIG_PKG_USING_PLAYER is not set
-# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+# CONFIG_PKG_USING_SAMPLES is not set
 
 #
-# Network Utilities
+# example package: hello
 #
-# CONFIG_PKG_USING_MDNS is not set
-# CONFIG_PKG_USING_UPNP is not set
-# CONFIG_PKG_USING_WLAN_WICED_SRC is not set
-# CONFIG_PKG_USING_CLOUDSDK is not set
-# CONFIG_PKG_USING_COREMARK is not set
-# CONFIG_PKG_USING_POWER_MANAGER is not set
-# CONFIG_PKG_USING_RT_OTA is not set
-# CONFIG_PKG_USING_RT_AT is not set
+# CONFIG_PKG_USING_HELLO is not set
 CONFIG_BSP_USING_SDRAM=y
 CONFIG_BSP_USING_UART0=y
 # CONFIG_BSP_USING_UART1 is not set

bsp/gd32450z-eval/rtconfig.h

@@ -11,12 +11,11 @@
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
 #define RT_TICK_PER_SECOND 100
-#define RT_DEBUG
 #define RT_USING_OVERFLOW_CHECK
-#define RT_DEBUG_INIT 0
-#define RT_DEBUG_THREAD 0
 #define RT_USING_HOOK
+#define RT_IDEL_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+#define RT_DEBUG
 
 /* Inter-Thread communication */
 
@@ -61,6 +60,7 @@
 #define FINSH_CMD_SIZE 80
 #define FINSH_USING_MSH
 #define FINSH_USING_MSH_DEFAULT
+#define FINSH_ARG_MAX 10
 
 /* Device virtual file system */
 
@@ -68,7 +68,7 @@
 #define DFS_USING_WORKDIR
 #define DFS_FILESYSTEMS_MAX 4
 #define DFS_FILESYSTEM_TYPES_MAX 4
-#define DFS_FD_MAX 8
+#define DFS_FD_MAX 16
 #define RT_USING_DFS_ELMFAT
 
 /* elm-chan's FatFs, Generic FAT Filesystem Module */
@@ -82,11 +82,11 @@
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 512
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
-#define RT_USING_DFS_NET
 
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
 #define RT_USING_PIN
 
@@ -98,7 +98,17 @@
 #define RT_USING_LIBC
 #define RT_USING_POSIX
 
-/* Network stack */
+/* Network */
+
+/* Socket abstraction layer */
+
+#define RT_USING_SAL
+
+/* protocol stack implement */
+
+#define SAL_USING_LWIP
+#define SAL_USING_POSIX
+#define SAL_PROTO_FAMILIES_NUM 4
 
 /* light weight TCP/IP stack */
 
@@ -150,11 +160,6 @@
 
 /* RT-Thread online packages */
 
-/* system packages */
-
-/* RT-Thread GUI Engine */
-
-
 /* IoT - internet of things */
 
 
@@ -178,16 +183,19 @@
 /* tools packages */
 
 
-/* miscellaneous packages */
+/* system packages */
 
 
-/* example package: hello */
+/* peripheral libraries and drivers */
 
 
-/* Privated Packages of RealThread */
+/* miscellaneous packages */
+
 
+/* sample package */
 
-/* Network Utilities */
+
+/* example package: hello */
 
 #define BSP_USING_SDRAM
 #define BSP_USING_UART0

bsp/lpc54608-LPCXpresso/.config

@@ -13,15 +13,24 @@ CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
 CONFIG_RT_TICK_PER_SECOND=1000
-CONFIG_RT_DEBUG=y
 CONFIG_RT_USING_OVERFLOW_CHECK=y
-CONFIG_RT_DEBUG_INIT=0
-CONFIG_RT_DEBUG_THREAD=0
 CONFIG_RT_USING_HOOK=y
+CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
 CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+CONFIG_RT_DEBUG=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
 
 #
 # Inter-Thread communication
@@ -49,6 +58,7 @@ CONFIG_RT_USING_HEAP=y
 # Kernel Device Object
 #
 CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
@@ -78,6 +88,7 @@ CONFIG_FINSH_USING_HISTORY=y
 CONFIG_FINSH_HISTORY_LINES=5
 CONFIG_FINSH_USING_SYMTAB=y
 CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 CONFIG_FINSH_THREAD_PRIORITY=20
 CONFIG_FINSH_THREAD_STACK_SIZE=4096
 CONFIG_FINSH_CMD_SIZE=80
@@ -85,6 +96,7 @@ CONFIG_FINSH_CMD_SIZE=80
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_USING_MSH_DEFAULT=y
 # CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
 
 #
 # Device virtual file system
@@ -93,7 +105,7 @@ CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=2
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
-CONFIG_DFS_FD_MAX=4
+CONFIG_DFS_FD_MAX=16
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -111,8 +123,7 @@ CONFIG_RT_DFS_ELM_DRIVES=2
 CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
 # CONFIG_RT_DFS_ELM_USE_ERASE is not set
 CONFIG_RT_DFS_ELM_REENTRANT=y
-# CONFIG_RT_USING_DFS_DEVFS is not set
-# CONFIG_RT_USING_DFS_NET is not set
+CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_DFS_UFFS is not set
@@ -123,6 +134,7 @@ CONFIG_RT_DFS_ELM_REENTRANT=y
 # Device Drivers
 #
 CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
@@ -130,6 +142,7 @@ CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_USING_I2C=y
 CONFIG_RT_USING_I2C_BITOPS=y
 CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 CONFIG_RT_USING_MTD_NAND=y
 # CONFIG_RT_MTD_NAND_DEBUG is not set
@@ -137,6 +150,11 @@ CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RTC_SYNC_USING_NTP is not set
 CONFIG_RT_USING_SDIO=y
+CONFIG_RT_SDIO_STACK_SIZE=512
+CONFIG_RT_SDIO_THREAD_PRIORITY=15
+CONFIG_RT_MMCSD_STACK_SIZE=1024
+CONFIG_RT_MMCSD_THREAD_PREORITY=22
+CONFIG_RT_MMCSD_MAX_PARTITION=16
 CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
@@ -146,6 +164,7 @@ CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_SPI_WIFI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_WIFI is not set
+# CONFIG_RT_USING_AUDIO is not set
 
 #
 # Using USB
@@ -158,12 +177,28 @@ CONFIG_RT_USING_SPI=y
 #
 CONFIG_RT_USING_LIBC=y
 CONFIG_RT_USING_PTHREADS=y
-# CONFIG_RT_USING_POSIX is not set
-# CONFIG_HAVE_SYS_SIGNALS is not set
+CONFIG_RT_USING_POSIX=y
+# CONFIG_RT_USING_POSIX_MMAP is not set
+# CONFIG_RT_USING_POSIX_TERMIOS is not set
+# CONFIG_RT_USING_POSIX_AIO is not set
+# CONFIG_RT_USING_LIBDL is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# Network
+#
 
 #
-# Network stack
+# Socket abstraction layer
 #
+CONFIG_RT_USING_SAL=y
+
+#
+# protocol stack implement
+#
+CONFIG_SAL_USING_LWIP=y
+CONFIG_SAL_USING_POSIX=y
+CONFIG_SAL_PROTO_FAMILIES_NUM=4
 
 #
 # light weight TCP/IP stack
@@ -201,6 +236,8 @@ CONFIG_RT_LWIP_TCP_WND=8196
 CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
 CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
 CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=1024
+# CONFIG_LWIP_NO_RX_THREAD is not set
+# CONFIG_LWIP_NO_TX_THREAD is not set
 CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
 CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
@@ -240,20 +277,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # RT-Thread online packages
 #
 
-#
-# system packages
-#
-
-#
-# RT-Thread GUI Engine
-#
-# CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_PERSIMMON is not set
-# CONFIG_PKG_USING_LWEXT4 is not set
-# CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_SQLITE is not set
-# CONFIG_PKG_USING_RTI is not set
-
 #
 # IoT - internet of things
 #
@@ -262,6 +285,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_MONGOOSE is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
@@ -283,6 +307,8 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
 
 #
 # security packages
@@ -294,6 +320,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 #
 # language packages
 #
+# CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 
@@ -301,27 +328,58 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # multimedia packages
 #
 # CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
 
 #
 # tools packages
 #
 # CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
-# CONFIG_PKG_USING_IPERF is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_STM32F4_HAL is not set
+# CONFIG_PKG_USING_STM32F4_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
 
 #
 # miscellaneous packages
 #
+# CONFIG_PKG_USING_OPTPARSE is not set
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+
+#
+# sample package
+#
+# CONFIG_PKG_USING_SAMPLES is not set
 
 #
 # example package: hello
 #
 # CONFIG_PKG_USING_HELLO is not set
-# CONFIG_PKG_USING_MULTIBUTTON is not set
 CONFIG_SOC_LPC54608=y
 CONFIG_RT_USING_UART0=y
 CONFIG_BSP_DRV_SDCARD=y

bsp/qemu-vexpress-a9/.config

@@ -13,16 +13,24 @@ CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
 CONFIG_RT_TICK_PER_SECOND=100
-CONFIG_RT_DEBUG=y
 CONFIG_RT_USING_OVERFLOW_CHECK=y
-CONFIG_RT_DEBUG_INIT=0
-CONFIG_RT_DEBUG_THREAD=0
 CONFIG_RT_USING_HOOK=y
 CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=512
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
 CONFIG_RT_TIMER_THREAD_STACK_SIZE=1024
+CONFIG_RT_DEBUG=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
 
 #
 # Inter-Thread communication
@@ -98,7 +106,7 @@ CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=2
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
-CONFIG_DFS_FD_MAX=4
+CONFIG_DFS_FD_MAX=16
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -117,7 +125,6 @@ CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=4096
 # CONFIG_RT_DFS_ELM_USE_ERASE is not set
 CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DFS_DEVFS=y
-CONFIG_RT_USING_DFS_NET=y
 CONFIG_RT_USING_DFS_ROMFS=y
 CONFIG_RT_USING_DFS_RAMFS=y
 # CONFIG_RT_USING_DFS_UFFS is not set
@@ -180,8 +187,20 @@ CONFIG_RT_USING_POSIX_TERMIOS=y
 CONFIG_RT_USING_POSIX_AIO=y
 
 #
-# Network stack
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+CONFIG_RT_USING_SAL=y
+
+#
+# protocol stack implement
 #
+CONFIG_SAL_USING_LWIP=y
+CONFIG_SAL_USING_POSIX=y
+CONFIG_SAL_PROTO_FAMILIES_NUM=4
 
 #
 # light weight TCP/IP stack
@@ -327,10 +346,6 @@ CONFIG_LOG_TRACE_USING_LEVEL_INFO=y
 # system packages
 #
 # CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_GUIENGINE_V200 is not set
-# CONFIG_PKG_USING_GUIENGINE_LATEST_VERSION is not set
-# CONFIG_GUIENGINE_IMAGE_LODEPNG is not set
-# CONFIG_GUIENGINE_IMAGE_PNG is not set
 # CONFIG_PKG_USING_PERSIMMON is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
@@ -359,8 +374,6 @@ CONFIG_LOG_TRACE_USING_LEVEL_INFO=y
 # CONFIG_PKG_USING_CANFESTIVAL is not set
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
-# CONFIG_PKG_USING_DSTR_V010 is not set
-# CONFIG_PKG_USING_DSTR_LATEST_VERSION is not set
 
 #
 # sample package

bsp/qemu-vexpress-a9/drivers/drv_smc911x.c

@@ -466,7 +466,7 @@ struct pbuf *smc911x_emac_rx(rt_device_t dev)
         tmplen = (pktlen + 3) / 4;
 
         /* allocate pbuf */
-        p = pbuf_alloc(PBUF_LINK, tmplen * 4, PBUF_RAM);
+        p = pbuf_alloc(PBUF_RAW, tmplen * 4, PBUF_RAM);
         if (p)
         {
             uint32_t *data = (uint32_t *)p->payload;

bsp/qemu-vexpress-a9/rtconfig.h

@@ -11,16 +11,14 @@
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
 #define RT_TICK_PER_SECOND 100
-#define RT_DEBUG
 #define RT_USING_OVERFLOW_CHECK
-#define RT_DEBUG_INIT 0
-#define RT_DEBUG_THREAD 0
 #define RT_USING_HOOK
 #define RT_IDEL_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 512
 #define RT_USING_TIMER_SOFT
 #define RT_TIMER_THREAD_PRIO 4
 #define RT_TIMER_THREAD_STACK_SIZE 1024
+#define RT_DEBUG
 
 /* Inter-Thread communication */
 
@@ -81,7 +79,7 @@
 #define DFS_USING_WORKDIR
 #define DFS_FILESYSTEMS_MAX 2
 #define DFS_FILESYSTEM_TYPES_MAX 2
-#define DFS_FD_MAX 4
+#define DFS_FD_MAX 16
 #define RT_USING_DFS_ELMFAT
 
 /* elm-chan's FatFs, Generic FAT Filesystem Module */
@@ -95,7 +93,6 @@
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 4096
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
-#define RT_USING_DFS_NET
 #define RT_USING_DFS_ROMFS
 #define RT_USING_DFS_RAMFS
 
@@ -136,7 +133,17 @@
 #define RT_USING_POSIX_TERMIOS
 #define RT_USING_POSIX_AIO
 
-/* Network stack */
+/* Network */
+
+/* Socket abstraction layer */
+
+#define RT_USING_SAL
+
+/* protocol stack implement */
+
+#define SAL_USING_LWIP
+#define SAL_USING_POSIX
+#define SAL_PROTO_FAMILIES_NUM 4
 
 /* light weight TCP/IP stack */
 

bsp/stm32f429-apollo/drivers/drv_spi_flash.c

@@ -84,4 +84,4 @@ static int rt_hw_spi_flash_with_sfud_init(void)
 
 	return RT_EOK;
 }
-INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init)
+INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init);

bsp/stm32f429-armfly/drivers/drv_spi_flash.c

@@ -106,5 +106,5 @@ static int rt_hw_spi_flash_init(void)
 {
     return w25qxx_init(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME);
 }
-INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init)
+INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
 #endif

components/CMSIS/Kconfig

@@ -12,7 +12,7 @@ config RT_USING_RTT_CMSIS
     bool "Using CMSIS Header files in RT-Thread"
     default n
     help
-        Use CMSIS header files in RT-Thread/components/CMSIS. Otherwise, use the 
+        Use CMSIS header files in RT-Thread/components/CMSIS. Otherwise, use the
         CMSIS header files in BSP.
 
 endmenu

components/dfs/filesystems/net/SConscript

-# RT-Thread building script for component
-
-from building import *
-
-cwd = GetCurrentDir()
-src = Glob('*.c')
-CPPPATH = [cwd]
-
-if not GetDepend('HAVE_SYS_SELECT_H'):
-    CPPPATH += [cwd + '/select']
-
-if not GetDepend('HAVE_SYS_SOCKET_H'):
-    CPPPATH += [cwd + '/socket']
-
-group = DefineGroup('Filesystem', src, depend = ['RT_USING_DFS', 'RT_USING_DFS_NET'], CPPPATH = CPPPATH)
-
-Return('group')

components/libc/Kconfig

@@ -22,7 +22,7 @@ if RT_USING_LIBC && RT_USING_DFS
     config RT_USING_POSIX_TERMIOS
         bool "Enable termios feature"
         default n
-    
+
     config RT_USING_POSIX_AIO
         bool "Enable AIO"
         default n