Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread
提交 ec0cb881 编写于 作者: B bernard.xiong
浏览文件
操作

remove lpc1100 because there is a cortex-m0 branch. 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2406 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 6c808004
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 3051 deletion
libcpu/arm/lpc1100/CMSIS/LPC11xx.h 已删除 100644 → 0
浏览文件 @ 6c808004
此差异已折叠。
libcpu/arm/lpc1100/CMSIS/core_cm0.c 已删除 100644 → 0
浏览文件 @ 6c808004
/**************************************************************************//**
* @file core_cm0.c
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Source File
* @version V1.30
* @date 30. October 2009
*
* @note
* Copyright (C) 2009 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#include <stdint.h>
/* define compiler specific symbols */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
/* ################### Compiler specific Intrinsics ########################### */
#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
/* ARM armcc specific functions */
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
__ASM uint32_t __get_PSP(void)
{
mrs r0, psp
bx lr
}
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
__ASM void __set_PSP(uint32_t topOfProcStack)
{
msr psp, r0
bx lr
}
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
__ASM uint32_t __get_MSP(void)
{
mrs r0, msp
bx lr
}
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
__ASM void __set_MSP(uint32_t mainStackPointer)
{
msr msp, r0
bx lr
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
__ASM uint32_t __REV16(uint16_t value)
{
rev16 r0, r0
bx lr
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
__ASM int32_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#if (__ARMCC_VERSION < 400000)
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
__ASM uint32_t __get_PRIMASK(void)
{
mrs r0, primask
bx lr
}
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
__ASM void __set_PRIMASK(uint32_t priMask)
{
msr primask, r0
bx lr
}
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
__ASM uint32_t __get_CONTROL(void)
{
mrs r0, control
bx lr
}
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
__ASM void __set_CONTROL(uint32_t control)
{
msr control, r0
bx lr
}
#endif /* __ARMCC_VERSION */
#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
/* IAR iccarm specific functions */
#pragma diag_suppress=Pe940
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
uint32_t __get_PSP(void)
{
__ASM("mrs r0, psp");
__ASM("bx lr");
}
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
void __set_PSP(uint32_t topOfProcStack)
{
__ASM("msr psp, r0");
__ASM("bx lr");
}
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
uint32_t __get_MSP(void)
{
__ASM("mrs r0, msp");
__ASM("bx lr");
}
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
void __set_MSP(uint32_t topOfMainStack)
{
__ASM("msr msp, r0");
__ASM("bx lr");
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
uint32_t __REV16(uint16_t value)
{
__ASM("rev16 r0, r0");
__ASM("bx lr");
}
#pragma diag_default=Pe940
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/* GNU gcc specific functions */
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
uint32_t __get_PSP(void) __attribute__( ( naked ) );
uint32_t __get_PSP(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, psp\n\t"
"MOV r0, %0 \n\t"
"BX lr \n\t" : "=r" (result) );
return(result);
}
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
void __set_PSP(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp, %0\n\t"
"BX lr \n\t" : : "r" (topOfProcStack) );
}
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
uint32_t __get_MSP(void) __attribute__( ( naked ) );
uint32_t __get_MSP(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, msp\n\t"
"MOV r0, %0 \n\t"
"BX lr \n\t" : "=r" (result) );
return(result);
}
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
void __set_MSP(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp, %0\n\t"
"BX lr \n\t" : : "r" (topOfMainStack) );
}
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
uint32_t __get_PRIMASK(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, primask" : "=r" (result) );
return(result);
}
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
void __set_PRIMASK(uint32_t priMask)
{
__ASM volatile ("MSR primask, %0" : : "r" (priMask) );
}
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
uint32_t __get_CONTROL(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, control" : "=r" (result) );
return(result);
}
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
void __set_CONTROL(uint32_t control)
{
__ASM volatile ("MSR control, %0" : : "r" (control) );
}
/**
* @brief Reverse byte order in integer value
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in integer value
*/
uint32_t __REV(uint32_t value)
{
uint32_t result=0;
__ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
uint32_t __REV16(uint16_t value)
{
uint32_t result=0;
__ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
int32_t __REVSH(int16_t value)
{
uint32_t result=0;
__ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
/* TASKING carm specific functions */
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all instrinsics,
* Including the CMSIS ones.
*/
#endif
libcpu/arm/lpc1100/CMSIS/core_cm0.h 已删除 100644 → 0
浏览文件 @ 6c808004
此差异已折叠。
libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c 已删除 100644 → 0
浏览文件 @ 6c808004
/**************************************************************************//**
* @file system_LPC11xx.c
* @brief CMSIS Cortex-M0 Device Peripheral Access Layer Source File
* for the NXP LPC11xx Device Series
* @version V1.00
* @date 17. November 2009
*
* @note
* Copyright (C) 2009 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#include <stdint.h>
#include "LPC11xx.h"
/*
//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
*/
/*--------------------- Clock Configuration ----------------------------------
//
// <e> Clock Configuration
// <e1> System Clock Setup
// <e2> System Oscillator Enable
// <o3.1> Select System Oscillator Frequency Range
// <0=> 1 - 20 MHz
// <1=> 15 - 25 MHz
// </e2>
// <e4> Watchdog Oscillator Enable
// <o5.0..4> Select Divider for Fclkana
// <0=> 2 <1=> 4 <2=> 6 <3=> 8
// <4=> 10 <5=> 12 <6=> 14 <7=> 16
// <8=> 18 <9=> 20 <10=> 22 <11=> 24
// <12=> 26 <13=> 28 <14=> 30 <15=> 32
// <16=> 34 <17=> 36 <18=> 38 <19=> 40
// <20=> 42 <21=> 44 <22=> 46 <23=> 48
// <24=> 50 <25=> 52 <26=> 54 <27=> 56
// <28=> 58 <29=> 60 <30=> 62 <31=> 64
// <o5.5..8> Select Watchdog Oscillator Analog Frequency (Fclkana)
// <0=> Disabled
// <1=> 0.5 MHz
// <2=> 0.8 MHz
// <3=> 1.1 MHz
// <4=> 1.4 MHz
// <5=> 1.6 MHz
// <6=> 1.8 MHz
// <7=> 2.0 MHz
// <8=> 2.2 MHz
// <9=> 2.4 MHz
// <10=> 2.6 MHz
// <11=> 2.7 MHz
// <12=> 2.9 MHz
// <13=> 3.1 MHz
// <14=> 3.2 MHz
// <15=> 3.4 MHz
// </e4>
// <o6> Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL)
// <0=> IRC Oscillator
// <1=> System Oscillator
// <2=> WDT Oscillator
// <3=> Invalid
// <e7> Use System PLL
// <i> F_pll = M * F_in
// <i> F_in must be in the range of 10 MHz to 25 MHz
// <o8.0..4> M: PLL Multiplier Selection
// <1-32><#-1>
// <o8.5..6> P: PLL Divider Selection
// <0=> 2
// <1=> 4
// <2=> 8
// <3=> 16
// <o8.7> DIRECT: Direct CCO Clock Output Enable
// <o8.8> BYPASS: PLL Bypass Enable
// </e7>
// <o9> Select Input Clock for Main clock (Register: MAINCLKSEL)
// <0=> IRC Oscillator
// <1=> Input Clock to System PLL
// <2=> WDT Oscillator
// <3=> System PLL Clock Out
// </e1>
// <o10.0..7> System AHB Divider <0-255>
// <i> 0 = is disabled
// <o11.0> SYS Clock Enable
// <o11.1> ROM Clock Enable
// <o11.2> RAM Clock Enable
// <o11.3> FLASHREG Flash Register Interface Clock Enable
// <o11.4> FLASHARRAY Flash Array Access Clock Enable
// <o11.5> I2C Clock Enable
// <o11.6> GPIO Clock Enable
// <o11.7> CT16B0 Clock Enable
// <o11.8> CT16B1 Clock Enable
// <o11.9> CT32B0 Clock Enable
// <o11.10> CT32B1 Clock Enable
// <o11.11> SSP0 Clock Enable
// <o11.12> UART Clock Enable
// <o11.13> ADC Clock Enable
// <o11.15> WDT Clock Enable
// <o11.16> IOCON Clock Enable
// <o11.18> SSP1 Clock Enable
//
// <o12.0..7> SSP0 Clock Divider <0-255>
// <i> 0 = is disabled
// <o13.0..7> UART Clock Divider <0-255>
// <i> 0 = is disabled
// <o14.0..7> SSP1 Clock Divider <0-255>
// <i> 0 = is disabled
// </e>
*/
#define CLOCK_SETUP 1
#define SYSCLK_SETUP 1
#define SYSOSC_SETUP 1
#define SYSOSCCTRL_Val 0x00000000
#define WDTOSC_SETUP 0
#define WDTOSCCTRL_Val 0x000000A0
#define SYSPLLCLKSEL_Val 0x00000001
#define SYSPLL_SETUP 1
#define SYSPLLCTRL_Val 0x00000023
#define MAINCLKSEL_Val 0x00000003
#define SYSAHBCLKDIV_Val 0x00000001
#define AHBCLKCTRL_Val 0x0001005F
#define SSP0CLKDIV_Val 0x00000001
#define UARTCLKDIV_Val 0x00000001
#define SSP1CLKDIV_Val 0x00000001
/*--------------------- Memory Mapping Configuration -------------------------
//
// <e> Memory Mapping
// <o1.0..1> System Memory Remap (Register: SYSMEMREMAP)
// <0=> Bootloader mapped to address 0
// <1=> RAM mapped to address 0
// <2=> Flash mapped to address 0
// <3=> Flash mapped to address 0
// </e>
*/
#define MEMMAP_SETUP 0
#define SYSMEMREMAP_Val 0x00000001
/*
//-------- <<< end of configuration section >>> ------------------------------
*/
/*----------------------------------------------------------------------------
Check the register settings
*----------------------------------------------------------------------------*/
#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
#define CHECK_RSVD(val, mask) (val & mask)
/* Clock Configuration -------------------------------------------------------*/
#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
#error "SYSOSCCTRL: Invalid values of reserved bits!"
#endif
#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
#error "WDTOSCCTRL: Invalid values of reserved bits!"
#endif
#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
#error "SYSPLLCLKSEL: Value out of range!"
#endif
#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
#error "SYSPLLCTRL: Invalid values of reserved bits!"
#endif
#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
#error "MAINCLKSEL: Invalid values of reserved bits!"
#endif
#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
#error "SYSAHBCLKDIV: Value out of range!"
#endif
#if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF))
#error "AHBCLKCTRL: Invalid values of reserved bits!"
#endif
#if (CHECK_RANGE((SSP0CLKDIV_Val), 0, 255))
#error "SSP0CLKDIV: Value out of range!"
#endif
#if (CHECK_RANGE((UARTCLKDIV_Val), 0, 255))
#error "UARTCLKDIV: Value out of range!"
#endif
#if (CHECK_RANGE((SSP1CLKDIV_Val), 0, 255))
#error "SSP1CLKDIV: Value out of range!"
#endif
#if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003))
#error "SYSMEMREMAP: Invalid values of reserved bits!"
#endif
/*----------------------------------------------------------------------------
DEFINES
*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define __XTAL (12000000UL) /* Oscillator frequency */
#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
#if (CLOCK_SETUP) /* Clock Setup */
#if (SYSCLK_SETUP) /* System Clock Setup */
#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
#if (__FREQSEL == 0)
#define __WDT_OSC_CLK ( 400000 / __DIVSEL)
#elif (__FREQSEL == 1)
#define __WDT_OSC_CLK ( 500000 / __DIVSEL)
#elif (__FREQSEL == 2)
#define __WDT_OSC_CLK ( 800000 / __DIVSEL)
#elif (__FREQSEL == 3)
#define __WDT_OSC_CLK (1100000 / __DIVSEL)
#elif (__FREQSEL == 4)
#define __WDT_OSC_CLK (1400000 / __DIVSEL)
#elif (__FREQSEL == 5)
#define __WDT_OSC_CLK (1600000 / __DIVSEL)
#elif (__FREQSEL == 6)
#define __WDT_OSC_CLK (1800000 / __DIVSEL)
#elif (__FREQSEL == 7)
#define __WDT_OSC_CLK (2000000 / __DIVSEL)
#elif (__FREQSEL == 8)
#define __WDT_OSC_CLK (2200000 / __DIVSEL)
#elif (__FREQSEL == 9)
#define __WDT_OSC_CLK (2400000 / __DIVSEL)
#elif (__FREQSEL == 10)
#define __WDT_OSC_CLK (2600000 / __DIVSEL)
#elif (__FREQSEL == 11)
#define __WDT_OSC_CLK (2700000 / __DIVSEL)
#elif (__FREQSEL == 12)
#define __WDT_OSC_CLK (2900000 / __DIVSEL)
#elif (__FREQSEL == 13)
#define __WDT_OSC_CLK (3100000 / __DIVSEL)
#elif (__FREQSEL == 14)
#define __WDT_OSC_CLK (3200000 / __DIVSEL)
#else
#define __WDT_OSC_CLK (3400000 / __DIVSEL)
#endif
#else
#define __WDT_OSC_CLK (1600000 / 2)
#endif // WDTOSC_SETUP
/* sys_pllclkin calculation */
#if ((SYSPLLCLKSEL_Val & 0x03) == 0)
#define __SYS_PLLCLKIN (__IRC_OSC_CLK)
#elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
#define __SYS_PLLCLKIN (__SYS_OSC_CLK)
#elif ((SYSPLLCLKSEL_Val & 0x03) == 2)
#define __SYS_PLLCLKIN (__WDT_OSC_CLK)
#else
#define __SYS_PLLCLKIN (0)
#endif
#if (SYSPLL_SETUP) /* System PLL Setup */
#define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
#else
#define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1))
#endif // SYSPLL_SETUP
/* main clock calculation */
#if ((MAINCLKSEL_Val & 0x03) == 0)
#define __MAIN_CLOCK (__IRC_OSC_CLK)
#elif ((MAINCLKSEL_Val & 0x03) == 1)
#define __MAIN_CLOCK (__SYS_PLLCLKIN)
#elif ((MAINCLKSEL_Val & 0x03) == 2)
#define __MAIN_CLOCK (__WDT_OSC_CLK)
#elif ((MAINCLKSEL_Val & 0x03) == 3)
#define __MAIN_CLOCK (__SYS_PLLCLKOUT)
#else
#define __MAIN_CLOCK (0)
#endif
#define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
#else // SYSCLK_SETUP
#if (SYSAHBCLKDIV_Val == 0)
#define __SYSTEM_CLOCK (0)
#else
#define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val)
#endif
#endif // SYSCLK_SETUP
#else
#define __SYSTEM_CLOCK (__XTAL)
#endif // CLOCK_SETUP
/*----------------------------------------------------------------------------
Clock Variable definitions
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
/*----------------------------------------------------------------------------
Clock functions
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
{
uint32_t wdt_osc = 0;
/* Determine clock frequency according to clock register values */
switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
case 0: wdt_osc = 400000; break;
case 1: wdt_osc = 500000; break;
case 2: wdt_osc = 800000; break;
case 3: wdt_osc = 1100000; break;
case 4: wdt_osc = 1400000; break;
case 5: wdt_osc = 1600000; break;
case 6: wdt_osc = 1800000; break;
case 7: wdt_osc = 2000000; break;
case 8: wdt_osc = 2200000; break;
case 9: wdt_osc = 2400000; break;
case 10: wdt_osc = 2600000; break;
case 11: wdt_osc = 2700000; break;
case 12: wdt_osc = 2900000; break;
case 13: wdt_osc = 3100000; break;
case 14: wdt_osc = 3200000; break;
case 15: wdt_osc = 3400000; break;
}
wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
case 0: /* Internal RC oscillator */
SystemCoreClock = __IRC_OSC_CLK;
break;
case 1: /* Input Clock to System PLL */
switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
case 0: /* Internal RC oscillator */
SystemCoreClock = __IRC_OSC_CLK;
break;
case 1: /* System oscillator */
SystemCoreClock = __SYS_OSC_CLK;
break;
case 2: /* WDT Oscillator */
SystemCoreClock = wdt_osc;
break;
case 3: /* Reserved */
SystemCoreClock = 0;
break;
}
break;
case 2: /* WDT Oscillator */
SystemCoreClock = wdt_osc;
break;
case 3: /* System PLL Clock Out */
switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
case 0: /* Internal RC oscillator */
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
SystemCoreClock = __IRC_OSC_CLK;
} else {
SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
}
break;
case 1: /* System oscillator */
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
SystemCoreClock = __SYS_OSC_CLK;
} else {
SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
}
break;
case 2: /* WDT Oscillator */
if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
SystemCoreClock = wdt_osc;
} else {
SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
}
break;
case 3: /* Reserved */
SystemCoreClock = 0;
break;
}
break;
}
SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
}
/**
* Initialize the system
*
* @param none
* @return none
*
* @brief Setup the microcontroller system.
* Initialize the System.
*/
void SystemInit (void)
{
#if (CLOCK_SETUP) /* Clock Setup */
#if (SYSCLK_SETUP) /* System Clock Setup */
#if (SYSOSC_SETUP) /* System Oscillator Setup */
uint32_t i;
LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
for (i = 0; i < 200; i++) __NOP();
LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
LPC_SYSCON->SYSPLLCLKUEN = 0x01;
while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
#if (SYSPLL_SETUP) /* System PLL Setup */
LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
#endif
#endif
#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
#endif
LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
LPC_SYSCON->MAINCLKUEN = 0x01;
while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
#endif
LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val;
LPC_SYSCON->SSP0CLKDIV = SSP0CLKDIV_Val;
LPC_SYSCON->UARTCLKDIV = UARTCLKDIV_Val;
LPC_SYSCON->SSP1CLKDIV = SSP1CLKDIV_Val;
#endif
#if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */
LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val;
#endif
}
libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h 已删除 100644 → 0
浏览文件 @ 6c808004
/**************************************************************************//**
* @file system_LPC11xx.h
* @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File
* for the NXP LPC11xx Device Series
* @version V1.00
* @date 17. November 2009
*
* @note
* Copyright (C) 2009 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#ifndef __SYSTEM_LPC11xx_H
#define __SYSTEM_LPC11xx_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
* Initialize the system
*
* @param none
* @return none
*
* @brief Setup the microcontroller system.
* Initialize the System and update the SystemCoreClock variable.
*/
extern void SystemInit (void);
/**
* Update SystemCoreClock variable
*
* @param none
* @return none
*
* @brief Updates the SystemCoreClock with current core Clock
* retrieved from cpu registers.
*/
extern void SystemCoreClockUpdate (void);
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_LPC11x_H */
libcpu/arm/lpc1100/context_rvds.S 已删除 100644 → 0
浏览文件 @ 6c808004
;/*
; * File : context_rvds.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2010-01-25 Bernard first version
; */
;/**
; * @addtogroup LPC1100
; */
;/*@{*/
NVIC_INT_CTRL EQU 0xE000ED04 ; interrupt control state register
NVIC_SYSPRI2 EQU 0xE000ED20 ; system priority register (2)
NVIC_PENDSV_PRI EQU 0x00FF0000 ; PendSV priority value (lowest)
NVIC_PENDSVSET EQU 0x10000000 ; value to trigger PendSV exception
AREA |.text|, CODE, READONLY, ALIGN=2
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_thread_switch_interrupt_flag
IMPORT rt_interrupt_from_thread
IMPORT rt_interrupt_to_thread
;/*
; * rt_base_t rt_hw_interrupt_disable();
; */
rt_hw_interrupt_disable PROC
EXPORT rt_hw_interrupt_disable
MRS r0, PRIMASK
CPSID I
BX LR
ENDP
;/*
; * void rt_hw_interrupt_enable(rt_base_t level);
; */
rt_hw_interrupt_enable PROC
EXPORT rt_hw_interrupt_enable
MSR PRIMASK, r0
BX LR
ENDP
;/*
; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
; * r0 --> from
; * r1 --> to
; */
rt_hw_context_switch_interrupt
EXPORT rt_hw_context_switch_interrupt
rt_hw_context_switch PROC
EXPORT rt_hw_context_switch
; set rt_thread_switch_interrupt_flag to 1
LDR r2, =rt_thread_switch_interrupt_flag
LDR r3, [r2]
CMP r3, #1
BEQ _reswitch
MOVS r3, #0x1
STR r3, [r2]
LDR r2, =rt_interrupt_from_thread ; set rt_interrupt_from_thread
STR r0, [r2]
_reswitch
LDR r2, =rt_interrupt_to_thread ; set rt_interrupt_to_thread
STR r1, [r2]
LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch)
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
BX LR
ENDP
; r0 --> swith from thread stack
; r1 --> swith to thread stack
; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
rt_hw_pend_sv PROC
EXPORT rt_hw_pend_sv
; disable interrupt to protect context switch
MRS r2, PRIMASK
CPSID I
; get rt_thread_switch_interrupt_flag
LDR r0, =rt_thread_switch_interrupt_flag
LDR r1, [r0]
CMP r1, #0x00
BEQ pendsv_exit ; pendsv already handled
; clear rt_thread_switch_interrupt_flag to 0
MOVS r1, #0x00
STR r1, [r0]
LDR r0, =rt_interrupt_from_thread
LDR r1, [r0]
CMP r1, #0x00
BEQ swtich_to_thread ; skip register save at the first time
MRS r1, psp ; get from thread stack pointer
SUBS r1, r1, #0x10
LDR r0, [r0]
STR r1, [r0] ; update from thread stack pointer
STMIA r1!, {r4 - r7} ; push r4 - r7 register
swtich_to_thread
LDR r1, =rt_interrupt_to_thread
LDR r1, [r1]
LDR r1, [r1] ; load thread stack pointer
LDMIA r1!, {r4 - r7} ; pop r4 - r7 register
MSR psp, r1 ; update stack pointer
pendsv_exit
; restore interrupt
MSR PRIMASK, r2
MOVS r0, #0x04
RSBS r0, #0
BX r0
ENDP
;/*
; * void rt_hw_context_switch_to(rt_uint32 to);
; * r0 --> to
; * this fucntion is used to perform the first thread switch
; */
rt_hw_context_switch_to PROC
EXPORT rt_hw_context_switch_to
; set to thread
LDR r1, =rt_interrupt_to_thread
STR r0, [r1]
; set from thread to 0
LDR r1, =rt_interrupt_from_thread
MOVS r0, #0x0
STR r0, [r1]
; set interrupt flag to 1
LDR r1, =rt_thread_switch_interrupt_flag
MOVS r0, #1
STR r0, [r1]
; set the PendSV exception priority
; LDR r0, =NVIC_SYSPRI2
; LDR r1, =NVIC_PENDSV_PRI
; STR r1, [r0]
; trigger the PendSV exception (causes context switch)
LDR r0, =NVIC_INT_CTRL
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
; enable interrupts at processor level
CPSIE I
; never reach here!
ENDP
; compatible with old version
rt_hw_interrupt_thread_switch PROC
EXPORT rt_hw_interrupt_thread_switch
BX lr
ENDP
END
libcpu/arm/lpc1100/cpu.c 已删除 100644 → 0
浏览文件 @ 6c808004
/*
* File : cpu.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-01-25 Bernard first version
*/
#include <rtthread.h>
/**
* @addtogroup LPC1100
*/
/*@{*/
/**
* reset cpu by dog's time-out
*
*/
void rt_hw_cpu_reset()
{
/*NOTREACHED*/
}
/**
* shutdown CPU
*
*/
void rt_hw_cpu_shutdown()
{
rt_kprintf("shutdown...\n");
RT_ASSERT(0);
}
/*@}*/
libcpu/arm/lpc1100/fault.c 已删除 100644 → 0
浏览文件 @ 6c808004
/*
* File : fault.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-01-25 Bernard first version
*/
#include <rtthread.h>
struct stack_contex
{
rt_uint32_t r0;
rt_uint32_t r1;
rt_uint32_t r2;
rt_uint32_t r3;
rt_uint32_t r12;
rt_uint32_t lr;
rt_uint32_t pc;
rt_uint32_t psr;
};
extern void rt_hw_interrupt_thread_switch(void);
extern long list_thread(void);
extern rt_thread_t rt_current_thread;
void rt_hw_hard_fault_exception(struct stack_contex* contex)
{
rt_kprintf("psr: 0x%08x\n", contex->psr);
rt_kprintf(" pc: 0x%08x\n", contex->pc);
rt_kprintf(" lr: 0x%08x\n", contex->lr);
rt_kprintf("r12: 0x%08x\n", contex->r12);
rt_kprintf("r03: 0x%08x\n", contex->r3);
rt_kprintf("r02: 0x%08x\n", contex->r2);
rt_kprintf("r01: 0x%08x\n", contex->r1);
rt_kprintf("r00: 0x%08x\n", contex->r0);
rt_kprintf("hard fault on thread: %s\n", rt_current_thread->name);
#ifdef RT_USING_FINSH
list_thread();
#endif
while (1);
}
libcpu/arm/lpc1100/fault_rvds.S 已删除 100644 → 0
浏览文件 @ 6c808004
;/*
; * File : fault_rvds.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2006, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2010-01-25 Bernard first version
; */
AREA |.text|, CODE, READONLY, ALIGN=2
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_hw_hard_fault_exception
rt_hw_hard_fault PROC
EXPORT rt_hw_hard_fault
; get current context
MRS r0, psp ; get fault thread stack pointer
PUSH {lr}
BL rt_hw_hard_fault_exception
POP {pc}
ENDP
END
libcpu/arm/lpc1100/interrupt.c 已删除 100644 → 0
浏览文件 @ 6c808004
/*
* File : interrupt.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-01-25 Bernard first version
*/
#include <rtthread.h>
/* exception and interrupt handler table */
rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
rt_uint8_t rt_thread_switch_interrupt_flag;
/*@}*/
libcpu/arm/lpc1100/stack.c 已删除 100644 → 0
浏览文件 @ 6c808004
/*
* File : stack.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-01-25 Bernard first version
*/
#include <rtthread.h>
/**
* @addtogroup LPC1100
*/
/*@{*/
/**
* This function will initialize thread stack
*
* @param tentry the entry of thread
* @param parameter the parameter of entry
* @param stack_addr the beginning stack address
* @param texit the function will be called when thread exit
*
* @return stack address
*/
rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
rt_uint8_t *stack_addr, void *texit)
{
unsigned long *stk;
stk = (unsigned long *)stack_addr;
*(stk) = 0x01000000L; /* PSR */
*(--stk) = (unsigned long)tentry; /* entry point, pc */
*(--stk) = (unsigned long)texit; /* lr */
*(--stk) = 0; /* r12 */
*(--stk) = 0; /* r3 */
*(--stk) = 0; /* r2 */
*(--stk) = 0; /* r1 */
*(--stk) = (unsigned long)parameter; /* r0 : argument */
*(--stk) = 0; /* r7 */
*(--stk) = 0; /* r6 */
*(--stk) = 0; /* r5 */
*(--stk) = 0; /* r4 */
/* return task's current stack address */
return (rt_uint8_t *)stk;
}
/*@}*/
libcpu/arm/lpc1100/start_rvds.S 已删除 100644 → 0
浏览文件 @ 6c808004
;/*****************************************************************************
; * @file: startup_LPC11xx.s
; * @purpose: CMSIS Cortex-M0 Core Device Startup File
; * for the NXP LPC11xx Device Series
; * @version: V1.0
; * @date: 25. Nov. 2008
; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------
; *
; * Copyright (C) 2008 ARM Limited. All rights reserved.
; * ARM Limited (ARM) is supplying this software for use with Cortex-M0
; * processor based microcontrollers. This file can be freely distributed
; * within development tools that are supporting such ARM based processors.
; *
; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
; *
; *****************************************************************************/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000100
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
IMPORT rt_hw_hard_fault
IMPORT rt_hw_pend_sv
IMPORT rt_hw_timer_handler
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD rt_hw_hard_fault ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD rt_hw_pend_sv ; PendSV Handler
DCD rt_hw_timer_handler ; SysTick Handler
; External Interrupts
DCD WAKEUP_IRQHandler ; 15 wakeup sources for all the
DCD WAKEUP_IRQHandler ; I/O pins starting from PIO0 (0:11)
DCD WAKEUP_IRQHandler ; all 40 are routed to the same ISR
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler
DCD WAKEUP_IRQHandler ; PIO1 (0:11)
DCD CAN_IRQHandler ; CAN
DCD SSP1_IRQHandler ; SSP1
DCD I2C_IRQHandler ; I2C
DCD TIMER16_0_IRQHandler ; 16-bit Timer0
DCD TIMER16_1_IRQHandler ; 16-bit Timer1
DCD TIMER32_0_IRQHandler ; 32-bit Timer0
DCD TIMER32_1_IRQHandler ; 32-bit Timer1
DCD SSP0_IRQHandler ; SSP0
DCD UART_IRQHandler ; UART
DCD USB_IRQHandler ; USB IRQ
DCD USB_FIQHandler ; USB FIQ
DCD ADC_IRQHandler ; A/D Converter
DCD WDT_IRQHandler ; Watchdog timer
DCD BOD_IRQHandler ; Brown Out Detect
DCD FMC_IRQHandler ; IP2111 Flash Memory Controller
DCD PIOINT3_IRQHandler ; PIO INT3
DCD PIOINT2_IRQHandler ; PIO INT2
DCD PIOINT1_IRQHandler ; PIO INT1
DCD PIOINT0_IRQHandler ; PIO INT0
IF :LNOT::DEF:NO_CRP
AREA |.ARM.__at_0x02FC|, CODE, READONLY
CRP_Key DCD 0xFFFFFFFF
ENDIF
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WAKEUP_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT SSP1_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT TIMER16_0_IRQHandler [WEAK]
EXPORT TIMER16_1_IRQHandler [WEAK]
EXPORT TIMER32_0_IRQHandler [WEAK]
EXPORT TIMER32_1_IRQHandler [WEAK]
EXPORT SSP0_IRQHandler [WEAK]
EXPORT UART_IRQHandler [WEAK]
EXPORT USB_IRQHandler [WEAK]
EXPORT USB_FIQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT WDT_IRQHandler [WEAK]
EXPORT BOD_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT PIOINT3_IRQHandler [WEAK]
EXPORT PIOINT2_IRQHandler [WEAK]
EXPORT PIOINT1_IRQHandler [WEAK]
EXPORT PIOINT0_IRQHandler [WEAK]
WAKEUP_IRQHandler
CAN_IRQHandler
SSP1_IRQHandler
I2C_IRQHandler
TIMER16_0_IRQHandler
TIMER16_1_IRQHandler
TIMER32_0_IRQHandler
TIMER32_1_IRQHandler
SSP0_IRQHandler
UART_IRQHandler
USB_IRQHandler
USB_FIQHandler
ADC_IRQHandler
WDT_IRQHandler
BOD_IRQHandler
FMC_IRQHandler
PIOINT3_IRQHandler
PIOINT2_IRQHandler
PIOINT1_IRQHandler
PIOINT0_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或