Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread
提交 dd42e939 编写于 作者: B bernard.xiong
浏览文件
操作

remove old CMSIS 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@683 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 dfdc92fa
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 4023 deletion
bsp/lpc176x/CMSIS/LPC17xx.h 已删除 100644 → 0
浏览文件 @ dfdc92fa
此差异已折叠。
bsp/lpc176x/CMSIS/core_cm3.c 已删除 100644 → 0
浏览文件 @ dfdc92fa
/******************************************************************************
* @file: core_cm3.c
* @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Source File
* @version: V1.20
* @date: 22. May 2009
*----------------------------------------------------------------------------
*
* Copyright (C) 2009 ARM Limited. All rights reserved.
*
* ARM Limited (ARM) is supplying this software for use with Cortex-Mx
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#include <stdint.h>
/* define compiler specific symbols */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for armcc */
#define __INLINE __inline /*!< inline keyword for armcc */
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for iarcc */
#define __INLINE inline /*!< inline keyword for iarcc. Only avaiable in High optimization mode! */
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for gcc */
#define __INLINE inline /*!< inline keyword for gcc */
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
/**
* @brief Return the Process Stack Pointer
*
* @param none
* @return uint32_t ProcessStackPointer
*
* Return the actual process stack pointer
*/
__ASM uint32_t __get_PSP(void)
{
mrs r0, psp
bx lr
}
/**
* @brief Set the Process Stack Pointer
*
* @param uint32_t Process Stack Pointer
* @return none
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
__ASM void __set_PSP(uint32_t topOfProcStack)
{
msr psp, r0
bx lr
}
/**
* @brief Return the Main Stack Pointer
*
* @param none
* @return uint32_t Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
__ASM uint32_t __get_MSP(void)
{
mrs r0, msp
bx lr
}
/**
* @brief Set the Main Stack Pointer
*
* @param uint32_t Main Stack Pointer
* @return none
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
__ASM void __set_MSP(uint32_t mainStackPointer)
{
msr msp, r0
bx lr
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param uint16_t value to reverse
* @return uint32_t reversed value
*
* Reverse byte order in unsigned short value
*/
__ASM uint32_t __REV16(uint16_t value)
{
rev16 r0, r0
bx lr
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param int16_t value to reverse
* @return int32_t reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
__ASM int32_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#if (__ARMCC_VERSION < 400000)
/**
* @brief Remove the exclusive lock created by ldrex
*
* @param none
* @return none
*
* Removes the exclusive lock which is created by ldrex.
*/
__ASM void __CLREX(void)
{
clrex
}
/**
* @brief Return the Base Priority value
*
* @param none
* @return uint32_t BasePriority
*
* Return the content of the base priority register
*/
__ASM uint32_t __get_BASEPRI(void)
{
mrs r0, basepri
bx lr
}
/**
* @brief Set the Base Priority value
*
* @param uint32_t BasePriority
* @return none
*
* Set the base priority register
*/
__ASM void __set_BASEPRI(uint32_t basePri)
{
msr basepri, r0
bx lr
}
/**
* @brief Return the Priority Mask value
*
* @param none
* @return uint32_t PriMask
*
* Return the state of the priority mask bit from the priority mask
* register
*/
__ASM uint32_t __get_PRIMASK(void)
{
mrs r0, primask
bx lr
}
/**
* @brief Set the Priority Mask value
*
* @param uint32_t PriMask
* @return none
*
* Set the priority mask bit in the priority mask register
*/
__ASM void __set_PRIMASK(uint32_t priMask)
{
msr primask, r0
bx lr
}
/**
* @brief Return the Fault Mask value
*
* @param none
* @return uint32_t FaultMask
*
* Return the content of the fault mask register
*/
__ASM uint32_t __get_FAULTMASK(void)
{
mrs r0, faultmask
bx lr
}
/**
* @brief Set the Fault Mask value
*
* @param uint32_t faultMask value
* @return none
*
* Set the fault mask register
*/
__ASM void __set_FAULTMASK(uint32_t faultMask)
{
msr faultmask, r0
bx lr
}
/**
* @brief Return the Control Register value
*
* @param none
* @return uint32_t Control value
*
* Return the content of the control register
*/
__ASM uint32_t __get_CONTROL(void)
{
mrs r0, control
bx lr
}
/**
* @brief Set the Control Register value
*
* @param uint32_t Control value
* @return none
*
* Set the control register
*/
__ASM void __set_CONTROL(uint32_t control)
{
msr control, r0
bx lr
}
#endif /* __ARMCC_VERSION */
#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
#pragma diag_suppress=Pe940
/**
* @brief Return the Process Stack Pointer
*
* @param none
* @return uint32_t ProcessStackPointer
*
* Return the actual process stack pointer
*/
uint32_t __get_PSP(void)
{
__ASM("mrs r0, psp");
__ASM("bx lr");
}
/**
* @brief Set the Process Stack Pointer
*
* @param uint32_t Process Stack Pointer
* @return none
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
void __set_PSP(uint32_t topOfProcStack)
{
__ASM("msr psp, r0");
__ASM("bx lr");
}
/**
* @brief Return the Main Stack Pointer
*
* @param none
* @return uint32_t Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
uint32_t __get_MSP(void)
{
__ASM("mrs r0, msp");
__ASM("bx lr");
}
/**
* @brief Set the Main Stack Pointer
*
* @param uint32_t Main Stack Pointer
* @return none
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
void __set_MSP(uint32_t topOfMainStack)
{
__ASM("msr msp, r0");
__ASM("bx lr");
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param uint16_t value to reverse
* @return uint32_t reversed value
*
* Reverse byte order in unsigned short value
*/
uint32_t __REV16(uint16_t value)
{
__ASM("rev16 r0, r0");
__ASM("bx lr");
}
/**
* @brief Reverse bit order of value
*
* @param uint32_t value to reverse
* @return uint32_t reversed value
*
* Reverse bit order of value
*/
uint32_t __RBIT(uint32_t value)
{
__ASM("rbit r0, r0");
__ASM("bx lr");
}
/**
* @brief LDR Exclusive
*
* @param uint8_t* address
* @return uint8_t value of (*address)
*
* Exclusive LDR command
*/
uint8_t __LDREXB(uint8_t *addr)
{
__ASM("ldrexb r0, [r0]");
__ASM("bx lr");
}
/**
* @brief LDR Exclusive
*
* @param uint16_t* address
* @return uint16_t value of (*address)
*
* Exclusive LDR command
*/
uint16_t __LDREXH(uint16_t *addr)
{
__ASM("ldrexh r0, [r0]");
__ASM("bx lr");
}
/**
* @brief LDR Exclusive
*
* @param uint32_t* address
* @return uint32_t value of (*address)
*
* Exclusive LDR command
*/
uint32_t __LDREXW(uint32_t *addr)
{
__ASM("ldrex r0, [r0]");
__ASM("bx lr");
}
/**
* @brief STR Exclusive
*
* @param uint8_t *address
* @param uint8_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXB(uint8_t value, uint8_t *addr)
{
__ASM("strexb r0, r0, [r1]");
__ASM("bx lr");
}
/**
* @brief STR Exclusive
*
* @param uint16_t *address
* @param uint16_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXH(uint16_t value, uint16_t *addr)
{
__ASM("strexh r0, r0, [r1]");
__ASM("bx lr");
}
/**
* @brief STR Exclusive
*
* @param uint32_t *address
* @param uint32_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXW(uint32_t value, uint32_t *addr)
{
__ASM("strex r0, r0, [r1]");
__ASM("bx lr");
}
#pragma diag_default=Pe940
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/**
* @brief Return the Process Stack Pointer
*
* @param none
* @return uint32_t ProcessStackPointer
*
* Return the actual process stack pointer
*/
uint32_t __get_PSP(void) __attribute__( ( naked ) );
uint32_t __get_PSP(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, psp\n\t"
"MOV r0, %0 \n\t"
"BX lr \n\t" : "=r" (result) );
return(result);
}
/**
* @brief Set the Process Stack Pointer
*
* @param uint32_t Process Stack Pointer
* @return none
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
void __set_PSP(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp, %0\n\t"
"BX lr \n\t" : : "r" (topOfProcStack) );
}
/**
* @brief Return the Main Stack Pointer
*
* @param none
* @return uint32_t Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
uint32_t __get_MSP(void) __attribute__( ( naked ) );
uint32_t __get_MSP(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, msp\n\t"
"MOV r0, %0 \n\t"
"BX lr \n\t" : "=r" (result) );
return(result);
}
/**
* @brief Set the Main Stack Pointer
*
* @param uint32_t Main Stack Pointer
* @return none
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
void __set_MSP(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp, %0\n\t"
"BX lr \n\t" : : "r" (topOfMainStack) );
}
/**
* @brief Return the Base Priority value
*
* @param none
* @return uint32_t BasePriority
*
* Return the content of the base priority register
*/
uint32_t __get_BASEPRI(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
return(result);
}
/**
* @brief Set the Base Priority value
*
* @param uint32_t BasePriority
* @return none
*
* Set the base priority register
*/
void __set_BASEPRI(uint32_t value)
{
__ASM volatile ("MSR basepri, %0" : : "r" (value) );
}
/**
* @brief Return the Priority Mask value
*
* @param none
* @return uint32_t PriMask
*
* Return the state of the priority mask bit from the priority mask
* register
*/
uint32_t __get_PRIMASK(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, primask" : "=r" (result) );
return(result);
}
/**
* @brief Set the Priority Mask value
*
* @param uint32_t PriMask
* @return none
*
* Set the priority mask bit in the priority mask register
*/
void __set_PRIMASK(uint32_t priMask)
{
__ASM volatile ("MSR primask, %0" : : "r" (priMask) );
}
/**
* @brief Return the Fault Mask value
*
* @param none
* @return uint32_t FaultMask
*
* Return the content of the fault mask register
*/
uint32_t __get_FAULTMASK(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, faultmask" : "=r" (result) );
return(result);
}
/**
* @brief Set the Fault Mask value
*
* @param uint32_t faultMask value
* @return none
*
* Set the fault mask register
*/
void __set_FAULTMASK(uint32_t faultMask)
{
__ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
}
/**
* @brief Reverse byte order in integer value
*
* @param uint32_t value to reverse
* @return uint32_t reversed value
*
* Reverse byte order in integer value
*/
uint32_t __REV(uint32_t value)
{
uint32_t result=0;
__ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order in unsigned short value
*
* @param uint16_t value to reverse
* @return uint32_t reversed value
*
* Reverse byte order in unsigned short value
*/
uint32_t __REV16(uint16_t value)
{
uint32_t result=0;
__ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param int32_t value to reverse
* @return int32_t reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
int32_t __REVSH(int16_t value)
{
uint32_t result=0;
__ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse bit order of value
*
* @param uint32_t value to reverse
* @return uint32_t reversed value
*
* Reverse bit order of value
*/
uint32_t __RBIT(uint32_t value)
{
uint32_t result=0;
__ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief LDR Exclusive
*
* @param uint8_t* address
* @return uint8_t value of (*address)
*
* Exclusive LDR command
*/
uint8_t __LDREXB(uint8_t *addr)
{
uint8_t result=0;
__ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief LDR Exclusive
*
* @param uint16_t* address
* @return uint16_t value of (*address)
*
* Exclusive LDR command
*/
uint16_t __LDREXH(uint16_t *addr)
{
uint16_t result=0;
__ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief LDR Exclusive
*
* @param uint32_t* address
* @return uint32_t value of (*address)
*
* Exclusive LDR command
*/
uint32_t __LDREXW(uint32_t *addr)
{
uint32_t result=0;
__ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief STR Exclusive
*
* @param uint8_t *address
* @param uint8_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXB(uint8_t value, uint8_t *addr)
{
uint32_t result=0;
__ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief STR Exclusive
*
* @param uint16_t *address
* @param uint16_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXH(uint16_t value, uint16_t *addr)
{
uint32_t result=0;
__ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief STR Exclusive
*
* @param uint32_t *address
* @param uint32_t value to store
* @return uint32_t successful / failed
*
* Exclusive STR command
*/
uint32_t __STREXW(uint32_t value, uint32_t *addr)
{
uint32_t result=0;
__ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief Return the Control Register value
*
* @param none
* @return uint32_t Control value
*
* Return the content of the control register
*/
uint32_t __get_CONTROL(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, control" : "=r" (result) );
return(result);
}
/**
* @brief Set the Control Register value
*
* @param uint32_t Control value
* @return none
*
* Set the control register
*/
void __set_CONTROL(uint32_t control)
{
__ASM volatile ("MSR control, %0" : : "r" (control) );
}
#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
/* TASKING carm specific functions */
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all instrinsics,
* Including the CMSIS ones.
*/
#endif
bsp/lpc176x/CMSIS/core_cm3.h 已删除 100644 → 0
浏览文件 @ dfdc92fa
此差异已折叠。
bsp/lpc176x/CMSIS/startup_LPC17xx.s 已删除 100644 → 0
浏览文件 @ dfdc92fa
;/*****************************************************************************
; * @file: startup_LPC17xx.s
; * @purpose: CMSIS Cortex-M3 Core Device Startup File
; * for the NXP LPC17xx Device Series
; * @version: V1.0
; * @date: 25. Nov. 2008
; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------
; *
; * Copyright (C) 2008 ARM Limited. All rights reserved.
; * ARM Limited (ARM) is supplying this software for use with Cortex-M3
; * processor based microcontrollers. This file can be freely distributed
; * within development tools that are supporting such ARM based processors.
; *
; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
; *
; *****************************************************************************/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000200
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 16: Watchdog Timer
DCD TIMER0_IRQHandler ; 17: Timer0
DCD TIMER1_IRQHandler ; 18: Timer1
DCD TIMER2_IRQHandler ; 19: Timer2
DCD TIMER3_IRQHandler ; 20: Timer3
DCD UART0_IRQHandler ; 21: UART0
DCD UART1_IRQHandler ; 22: UART1
DCD UART2_IRQHandler ; 23: UART2
DCD UART3_IRQHandler ; 24: UART3
DCD PWM1_IRQHandler ; 25: PWM1
DCD I2C0_IRQHandler ; 26: I2C0
DCD I2C1_IRQHandler ; 27: I2C1
DCD I2C2_IRQHandler ; 28: I2C2
DCD SPI_IRQHandler ; 29: SPI
DCD SSP0_IRQHandler ; 30: SSP0
DCD SSP1_IRQHandler ; 31: SSP1
DCD PLL0_IRQHandler ; 32: PLL0 Lock (Main PLL)
DCD RTC_IRQHandler ; 33: Real Time Clock
DCD EINT0_IRQHandler ; 34: External Interrupt 0
DCD EINT1_IRQHandler ; 35: External Interrupt 1
DCD EINT2_IRQHandler ; 36: External Interrupt 2
DCD EINT3_IRQHandler ; 37: External Interrupt 3
DCD ADC_IRQHandler ; 38: A/D Converter
DCD BOD_IRQHandler ; 39: Brown-Out Detect
DCD USB_IRQHandler ; 40: USB
DCD CAN_IRQHandler ; 41: CAN
DCD DMA_IRQHandler ; 42: General Purpose DMA
DCD I2S_IRQHandler ; 43: I2S
DCD ENET_IRQHandler ; 44: Ethernet
DCD RIT_IRQHandler ; 45: Repetitive Interrupt Timer
DCD MCPWM_IRQHandler ; 46: Motor Control PWM
DCD QEI_IRQHandler ; 47: Quadrature Encoder Interface
DCD PLL1_IRQHandler ; 48: PLL1 Lock (USB PLL)
DCD USBActivity_IRQHandler ; USB Activity interrupt to wakeup
DCD CANActivity_IRQHandler ; CAN Activity interrupt to wakeup
IF :LNOT::DEF:NO_CRP
AREA |.ARM.__at_0x02FC|, CODE, READONLY
CRP_Key DCD 0xFFFFFFFF
ENDIF
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT TIMER0_IRQHandler [WEAK]
EXPORT TIMER1_IRQHandler [WEAK]
EXPORT TIMER2_IRQHandler [WEAK]
EXPORT TIMER3_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT PWM1_IRQHandler [WEAK]
EXPORT I2C0_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
EXPORT SSP0_IRQHandler [WEAK]
EXPORT SSP1_IRQHandler [WEAK]
EXPORT PLL0_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT EINT0_IRQHandler [WEAK]
EXPORT EINT1_IRQHandler [WEAK]
EXPORT EINT2_IRQHandler [WEAK]
EXPORT EINT3_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT BOD_IRQHandler [WEAK]
EXPORT USB_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT DMA_IRQHandler [WEAK]
EXPORT I2S_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT RIT_IRQHandler [WEAK]
EXPORT MCPWM_IRQHandler [WEAK]
EXPORT QEI_IRQHandler [WEAK]
EXPORT PLL1_IRQHandler [WEAK]
EXPORT USBActivity_IRQHandler [WEAK]
EXPORT CANActivity_IRQHandler [WEAK]
WDT_IRQHandler
TIMER0_IRQHandler
TIMER1_IRQHandler
TIMER2_IRQHandler
TIMER3_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
PWM1_IRQHandler
I2C0_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI_IRQHandler
SSP0_IRQHandler
SSP1_IRQHandler
PLL0_IRQHandler
RTC_IRQHandler
EINT0_IRQHandler
EINT1_IRQHandler
EINT2_IRQHandler
EINT3_IRQHandler
ADC_IRQHandler
BOD_IRQHandler
USB_IRQHandler
CAN_IRQHandler
DMA_IRQHandler
I2S_IRQHandler
ENET_IRQHandler
RIT_IRQHandler
MCPWM_IRQHandler
QEI_IRQHandler
PLL1_IRQHandler
USBActivity_IRQHandler
CANActivity_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
bsp/lpc176x/CMSIS/system_LPC17xx.c 已删除 100644 → 0
浏览文件 @ dfdc92fa
此差异已折叠。
bsp/lpc176x/CMSIS/system_LPC17xx.h 已删除 100644 → 0
浏览文件 @ dfdc92fa
/******************************************************************************
* @file: system_LPC17xx.h
* @purpose: CMSIS Cortex-M3 Device Peripheral Access Layer Header File
* for the NXP LPC17xx Device Series
* @version: V1.01
* @date: 22. Jul. 2009
*----------------------------------------------------------------------------
*
* Copyright (C) 2009 ARM Limited. All rights reserved.
*
* ARM Limited (ARM) is supplying this software for use with Cortex-M3
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#ifndef __SYSTEM_LPC17xx_H
#define __SYSTEM_LPC17xx_H
#ifdef __cplusplus
extern "C" {
#endif
extern uint32_t SystemFrequency; /*!< System Clock Frequency (Core Clock) */
/**
* Initialize the system
*
* @param none
* @return none
*
* @brief Setup the microcontroller system.
* Initialize the System and update the SystemFrequency variable.
*/
extern void SystemInit (void);
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_LPC17xx_H */
bsp/lpc176x/CMSIS/type.h 已删除 100644 → 0
浏览文件 @ dfdc92fa
/*****************************************************************************
* type.h: Type definition Header file for NXP LPC17xx Family
* Microprocessors
*
* Copyright(C) 2009, NXP Semiconductor
* All rights reserved.
*
* History
* 2009.05.25 ver 1.00 Prelimnary version, first Release
*
******************************************************************************/
#include <stdint.h>
#ifndef __TYPE_H__
#define __TYPE_H__
#ifndef NULL
#define NULL ((void *)0)
#endif
#ifndef FALSE
#define FALSE (0)
#endif
#ifndef TRUE
#define TRUE (1)
#endif
typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
#endif /* __TYPE_H__ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或