Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 c135b34b 编写于 作者: misonyo's avatar misonyo
浏览文件
操作

[bsp/stm32f411]add pwm driver

上级 8c230ba1
展开全部 隐藏空白更改
内联 并排
Showing with 492 addition and 887 deletion
bsp/es32f0654/project.uvoptx
浏览文件 @ c135b34b
......@@ -77,7 +77,7 @@
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<CpuCode>255</CpuCode>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
......@@ -101,6 +101,8 @@
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>3</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
......@@ -112,9 +114,14 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>CMSIS_AGDI</Key>
<Name>-X"" -O206 -S0 -C0 -P00 -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0ES32F065x.FLM -FS00 -FL040000 -FP0($$Device:ES32F0654LT$Flash\ES32F065x.FLM)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
......@@ -165,6 +172,10 @@
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
......
bsp/es32f0654/project.uvprojx
浏览文件 @ c135b34b
......@@ -7,11 +7,12 @@
<TargetName>rt-thread</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>ES32F0654LT</Device>
<Vendor>Eastsoft</Vendor>
<PackID>Eastsoft.ES32_DFP.1.0.1</PackID>
<PackID>Eastsoft.ES32_DFP.1.0.2</PackID>
<PackURL>http://www.essemi.com</PackURL>
<Cpu>IRAM(0x20000000,0x00008000) IROM(0x00000000,0x00040000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec />
......@@ -365,7 +366,7 @@
<ScatterFile />
<IncludeLibs />
<IncludeLibsPath />
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<Misc />
<LinkerInputFile />
<DisabledWarnings />
</LDads>
......
bsp/es32f0654/template.uvoptx
浏览文件 @ c135b34b
......@@ -77,7 +77,7 @@
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<CpuCode>255</CpuCode>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
......@@ -101,6 +101,8 @@
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>3</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
......@@ -112,9 +114,14 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>CMSIS_AGDI</Key>
<Name>-X"" -O206 -S0 -C0 -P00 -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0ES32F065x.FLM -FS00 -FL040000 -FP0($$Device:ES32F0654LT$Flash\ES32F065x.FLM)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
......@@ -165,6 +172,10 @@
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
......
bsp/es32f0654/template.uvprojx
浏览文件 @ c135b34b
......@@ -10,11 +10,12 @@
<TargetName>rt-thread</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>ES32F0654LT</Device>
<Vendor>Eastsoft</Vendor>
<PackID>Eastsoft.ES32_DFP.1.0.1</PackID>
<PackID>Eastsoft.ES32_DFP.1.0.2</PackID>
<PackURL>http://www.essemi.com</PackURL>
<Cpu>IRAM(0x20000000,0x00008000) IROM(0x00000000,0x00040000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
......
bsp/stm32/stm32f411-st-nucleo/.config
浏览文件 @ c135b34b
......@@ -63,7 +63,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart2"
CONFIG_RT_VER_NUM=0x40000
CONFIG_RT_VER_NUM=0x40001
CONFIG_ARCH_ARM=y
CONFIG_ARCH_ARM_CORTEX_M=y
CONFIG_ARCH_ARM_CORTEX_M4=y
......@@ -113,6 +113,7 @@ CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_SERIAL_USING_DMA is not set
CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......@@ -129,6 +130,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
#
# Using WiFi
......@@ -313,6 +315,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
#
# samples: kernel and components samples
......@@ -322,6 +325,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
CONFIG_SOC_FAMILY_STM32=y
CONFIG_SOC_SERIES_STM32F4=y
......@@ -340,6 +344,8 @@ CONFIG_SOC_STM32F411RE=y
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART2=y
# CONFIG_BSP_USING_I2C1 is not set
# CONFIG_BSP_USING_PWM is not set
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
#
......
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/.mxproject
浏览文件 @ c135b34b
[PreviousGenFiles]
HeaderPath=D:/repository/BspFramework/rt-thread/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc
HeaderPath=D:/repository/rt-thread-rtt/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc
HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;
SourcePath=D:/repository/BspFramework/rt-thread/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src
SourcePath=D:/repository/rt-thread-rtt/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src
SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;
[PreviousLibFiles]
......
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
浏览文件 @ c135b34b
......@@ -5,28 +5,34 @@ Mcu.Family=STM32F4
Mcu.IP0=NVIC
Mcu.IP1=RCC
Mcu.IP2=SYS
Mcu.IP3=USART2
Mcu.IPNb=4
Mcu.IP3=TIM3
Mcu.IP4=USART2
Mcu.IPNb=5
Mcu.Name=STM32F411R(C-E)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC13-ANTI_TAMP
Mcu.Pin1=PC14-OSC32_IN
Mcu.Pin10=PB3
Mcu.Pin11=VP_SYS_VS_Systick
Mcu.Pin10=PB0
Mcu.Pin11=PB1
Mcu.Pin12=PA13
Mcu.Pin13=PA14
Mcu.Pin14=PB3
Mcu.Pin15=VP_SYS_VS_Systick
Mcu.Pin16=VP_TIM3_VS_ClockSourceINT
Mcu.Pin2=PC15-OSC32_OUT
Mcu.Pin3=PH0 - OSC_IN
Mcu.Pin4=PH1 - OSC_OUT
Mcu.Pin5=PA2
Mcu.Pin6=PA3
Mcu.Pin7=PA5
Mcu.Pin8=PA13
Mcu.Pin9=PA14
Mcu.PinsNb=12
Mcu.Pin8=PA6
Mcu.Pin9=PA7
Mcu.PinsNb=17
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F411RETx
MxCube.Version=5.0.0
MxDb.Version=DB.5.0.0
MxCube.Version=5.0.1
MxDb.Version=DB.5.0.1
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true
......@@ -55,6 +61,10 @@ PA5.GPIOParameters=GPIO_Label
PA5.GPIO_Label=LD2 [Green Led]
PA5.Locked=true
PA5.Signal=GPIO_Output
PA6.Signal=S_TIM3_CH1
PA7.Signal=S_TIM3_CH2
PB0.Signal=S_TIM3_CH3
PB1.Signal=S_TIM3_CH4
PB3.GPIOParameters=GPIO_Label
PB3.GPIO_Label=SWO
PB3.Locked=true
......@@ -90,8 +100,8 @@ ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=..\\..\\..\\..\\..\\..\\..\\..\\board\\stm32cubefx-repo\\STM32Cube_FW_F4_V1.11.0
ProjectManager.DefaultFWLocation=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F411RETx
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.23.0
......@@ -111,7 +121,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_TIM3_Init-TIM3-false-HAL-true
RCC.48MHZClocksFreq_Value=42000000
RCC.AHBFreq_Value=84000000
RCC.APB1CLKDivider=RCC_HCLK_DIV2
......@@ -147,9 +157,24 @@ RCC.VCOOutputFreq_Value=168000000
RCC.VcooutputI2S=48000000
SH.GPXTI13.0=GPIO_EXTI13
SH.GPXTI13.ConfNb=1
SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
SH.S_TIM3_CH1.ConfNb=1
SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
SH.S_TIM3_CH2.ConfNb=1
SH.S_TIM3_CH3.0=TIM3_CH3,PWM Generation3 CH3
SH.S_TIM3_CH3.ConfNb=1
SH.S_TIM3_CH4.0=TIM3_CH4,PWM Generation4 CH4
SH.S_TIM3_CH4.ConfNb=1
TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
TIM3.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
TIM3.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
TIM3.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
TIM3.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation2 CH2,Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
USART2.IPParameters=VirtualMode
USART2.VirtualMode=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_TIM3_VS_ClockSourceINT.Mode=Internal
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
board=NUCLEO-F411RE
boardIOC=true
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/main.h
浏览文件 @ c135b34b
......@@ -70,6 +70,8 @@ extern "C" {
/* USER CODE END EM */
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
......
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
浏览文件 @ c135b34b
......@@ -74,7 +74,7 @@
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
......
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/main.c
浏览文件 @ c135b34b
......@@ -62,6 +62,8 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
TIM_HandleTypeDef htim3;
UART_HandleTypeDef huart2;
/* USER CODE BEGIN PV */
......@@ -72,6 +74,7 @@ UART_HandleTypeDef huart2;
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_TIM3_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
......@@ -110,6 +113,7 @@ int main(void)
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART2_UART_Init();
MX_TIM3_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
......@@ -167,6 +171,76 @@ void SystemClock_Config(void)
}
}
/**
* @brief TIM3 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM3_Init(void)
{
/* USER CODE BEGIN TIM3_Init 0 */
/* USER CODE END TIM3_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
/* USER CODE BEGIN TIM3_Init 1 */
/* USER CODE END TIM3_Init 1 */
htim3.Instance = TIM3;
htim3.Init.Prescaler = 0;
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
htim3.Init.Period = 0;
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 0;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM3_Init 2 */
/* USER CODE END TIM3_Init 2 */
HAL_TIM_MspPostInit(&htim3);
}
/**
* @brief USART2 Initialization Function
* @param None
......
bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
浏览文件 @ c135b34b
......@@ -78,7 +78,9 @@
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
......@@ -99,6 +101,91 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspInit 0 */
/* USER CODE END TIM3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM3_CLK_ENABLE();
/* USER CODE BEGIN TIM3_MspInit 1 */
/* USER CODE END TIM3_MspInit 1 */
}
}
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(htim->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspPostInit 0 */
/* USER CODE END TIM3_MspPostInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**TIM3 GPIO Configuration
PA6 ------> TIM3_CH1
PA7 ------> TIM3_CH2
PB0 ------> TIM3_CH3
PB1 ------> TIM3_CH4
*/
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN TIM3_MspPostInit 1 */
/* USER CODE END TIM3_MspPostInit 1 */
}
}
/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspDeInit 0 */
/* USER CODE END TIM3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM3_CLK_DISABLE();
/* USER CODE BEGIN TIM3_MspDeInit 1 */
/* USER CODE END TIM3_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
......
bsp/stm32/stm32f411-st-nucleo/board/Kconfig
浏览文件 @ c135b34b
......@@ -31,6 +31,50 @@ menu "On-chip Peripheral Drivers"
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 0 80
default 30
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 0 80
default 31
endif
menuconfig BSP_USING_PWM
bool "Enable pwm"
default n
select RT_USING_PWM
if BSP_USING_PWM
menuconfig BSP_USING_PWM3
bool "Enable timer3 output pwm"
default n
if BSP_USING_PWM3
config BSP_USING_PWM3_CH1
bool "Enable PWM3 channel1 (PA6)"
default n
config BSP_USING_PWM3_CH2
bool "Enable PWM3 channel2 (PA7)"
default n
config BSP_USING_PWM3_CH3
bool "Enable PWM3 channel3 (PB0)"
default n
config BSP_USING_PWM3_CH4
bool "Enable PWM3 channel4 (PB1)"
default n
endif
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
......
bsp/stm32/stm32f411-st-nucleo/board/board.c
浏览文件 @ c135b34b
......@@ -21,9 +21,8 @@ void SystemClock_Config(void)
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 4;
......
bsp/stm32/stm32f411-st-nucleo/rtconfig.h
浏览文件 @ c135b34b
......@@ -39,7 +39,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart2"
#define RT_VER_NUM 0x40000
#define RT_VER_NUM 0x40001
#define ARCH_ARM
#define ARCH_ARM_CORTEX_M
#define ARCH_ARM_CORTEX_M4
......@@ -78,6 +78,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN
/* Using WiFi */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或