提交 bff77ee8 编写于 作者: wuyangyong's avatar wuyangyong

update rtc driver.

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1811 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 a4cff858
......@@ -156,10 +156,6 @@ void rt_hw_rtc_init(void)
rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
#ifdef RT_USING_FINSH
list_date();
#endif
return;
}
......
......@@ -49,18 +49,18 @@ static time_t rt_mktime(struct tm *tm)
{
long res;
int year;
year = tm->tm_year - 70;
res = YEAR * year + DAY * ((year + 1) / 4);
res += month[tm->tm_mon];
year = tm->tm_year - 70;
res = YEAR * year + DAY * ((year + 1) / 4);
res += month[tm->tm_mon];
if (tm->tm_mon > 1 && ((year + 2) % 4))
res -= DAY;
res += DAY * (tm->tm_mday - 1);
res += HOUR * tm->tm_hour;
res += DAY * (tm->tm_mday - 1);
res += HOUR * tm->tm_hour;
res += MINUTE * tm->tm_min;
res += tm->tm_sec;
return res;
res += tm->tm_sec;
return res;
}
static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag)
{
......@@ -109,7 +109,7 @@ static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args)
/* Enable the PWR clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
/* Allow access to RTC */
PWR_BackupAccessCmd(ENABLE);
......@@ -154,35 +154,35 @@ int RTC_Config(void)
u32 count=0x200000;
/* Enable the PWR clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
/* Allow access to RTC */
PWR_BackupAccessCmd(ENABLE);
RCC_LSEConfig(RCC_LSE_ON);
/* Wait till LSE is ready */
/* Wait till LSE is ready */
while ( (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) && (--count) );
if ( count == 0 )
{
return -1;
}
/* Select the RTC Clock Source */
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
SynchPrediv = 0xFF;
AsynchPrediv = 0x7F;
/* Enable the RTC Clock */
RCC_RTCCLKCmd(ENABLE);
/* Wait for RTC APB registers synchronisation */
RTC_WaitForSynchro();
/* Enable The TimeStamp */
//RTC_TimeStampCmd(RTC_TimeStampEdge_Falling, ENABLE);
return 0;
//RTC_TimeStampCmd(RTC_TimeStampEdge_Falling, ENABLE);
return 0;
}
int RTC_Configuration(void)
......@@ -195,21 +195,21 @@ int RTC_Configuration(void)
RTC_TimeStructure.RTC_Hours = 0;
RTC_TimeStructure.RTC_Minutes = 0;
RTC_TimeStructure.RTC_Seconds = 0;
/* Set the Date */
RTC_DateStructure.RTC_Month = 1;
RTC_DateStructure.RTC_Date = 1;
RTC_DateStructure.RTC_Year = 0;
RTC_DateStructure.RTC_WeekDay = 4;
RTC_DateStructure.RTC_Date = 1;
RTC_DateStructure.RTC_Year = 0;
RTC_DateStructure.RTC_WeekDay = 4;
/* Calendar Configuration */
RTC_InitStructure.RTC_AsynchPrediv = AsynchPrediv;
RTC_InitStructure.RTC_SynchPrediv = SynchPrediv;
RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
RTC_Init(&RTC_InitStructure);
/* Set Current Time and Date */
RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);
RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);
RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);
if (RTC_Init(&RTC_InitStructure) == ERROR)
return -1;
......@@ -250,10 +250,6 @@ void rt_hw_rtc_init(void)
rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
#ifdef RT_USING_FINSH
list_date();
#endif
return;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册