Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 5d09122b 编写于 作者: W Willian Chan
浏览文件
操作

【修改】Kconfig配置文件以及README.md。 

Signed-off-by: NWillian Chan <chentingwei@rt-thread.com>
上级 7af98b5f
展开全部 隐藏空白更改
内联 并排
Showing with 859 addition and 207 deletion
bsp/stm32/stm32f103-dofly-M3S/.config
浏览文件 @ 5d09122b
......@@ -386,9 +386,6 @@ CONFIG_SOC_STM32F103RB=y
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_I2C1 is not set
#
# Board extended module Drivers
......
bsp/stm32/stm32f103-dofly-M3S/README.md
浏览文件 @ 5d09122b
......@@ -40,7 +40,7 @@ STM32F103 德飞莱-尼莫 M3S 是徳飞莱推出的一款基于 ARM Cortex-M3
| **片上外设** | **支持情况** | **备注** |
| :-----: | :-----: | :-----: |
| GPIO | 支持 | |
| USART | 支持 | USART3 |
| USART | 支持 | USART1 |
## 使用说明
......@@ -104,4 +104,4 @@ msh >
维护人:
- [WillianChan](https://github.com/willianchanlovegithub), 邮箱：<willianchan_lovelife@foxmail.com>
\ No newline at end of file
- [WillianChan](https://github.com/willianchanlovegithub)
\ No newline at end of file
bsp/stm32/stm32f103-dofly-M3S/SConstruct
浏览文件 @ 5d09122b
......@@ -15,7 +15,7 @@ except:
print(RTT_ROOT)
exit(-1)
TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
env = Environment(tools = ['mingw'],
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
......@@ -28,7 +28,7 @@ env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
if rtconfig.PLATFORM == 'iar':
env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
env.Replace(ARFLAGS = [''])
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rtthread.map')
Export('RTT_ROOT')
Export('rtconfig')
......
bsp/stm32/stm32f103-dofly-M3S/board/Kconfig
浏览文件 @ 5d09122b
......@@ -25,48 +25,6 @@ menu "On-chip Peripheral Drivers"
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 1 216
default 15
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 216
default 16
endif
endmenu
......
bsp/stm32/stm32f103-dofly-M3S/project.uvopt
浏览文件 @ 5d09122b
......@@ -13,6 +13,7 @@
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>
<DaveTm>
......@@ -31,6 +32,7 @@
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
......@@ -96,9 +98,11 @@
<tRtrace>0</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<tPdscDbg>0</tPdscDbg>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>6</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
......@@ -110,9 +114,14 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U066FFF544856824987055530 -O78 -SF1800 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN0</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
......@@ -156,6 +165,17 @@
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
......
bsp/stm32/stm32f103-dofly-M3S/project.uvproj
浏览文件 @ 5d09122b
......@@ -7,6 +7,7 @@
<TargetName>rt-thread</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32F103RB</Device>
......@@ -42,7 +43,7 @@
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
<OutputName>rt-thread</OutputName>
<OutputName>rtthread</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
......@@ -69,6 +70,8 @@
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>1</RunUserProg1>
......@@ -77,6 +80,8 @@
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString />
......@@ -138,7 +143,6 @@
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>0</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
<UsePdscDebugDescription>0</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>6</TargetSelection>
......@@ -155,7 +159,7 @@
<PeripheralDll />
<PeripheralDllArguments />
<InitializationFile />
<Driver>Segger\JL2CM3.dll</Driver>
<Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
</TargetDlls>
</DebugOption>
<Utilities>
......@@ -215,12 +219,14 @@
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<nSecure>0</nSecure>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
......@@ -354,7 +360,15 @@
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>1</v6Lang>
<v6LangP>1</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls />
<Define>USE_HAL_DRIVER, STM32F103xE</Define>
......@@ -372,6 +386,7 @@
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls />
<Define />
......
bsp/stm32/stm32f103-dofly-M3S/project.uvprojx
浏览文件 @ 5d09122b
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>rt-thread</TargetName>
......@@ -16,28 +19,28 @@
<PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x00010000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec />
<StartupFile />
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000 -FP0($$Device:STM32F103ZE$Flash\STM32F10x_512.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile>$$Device:STM32F103ZE$Device\Include\stm32f10x.h</RegisterFile>
<MemoryEnv />
<Cmp />
<Asm />
<Linker />
<OHString />
<InfinionOptionDll />
<SLE66CMisc />
<SLE66AMisc />
<SLE66LinkerMisc />
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:STM32F103ZE$SVD\STM32F103xx.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath />
<IncludePath />
<LibPath />
<RegisterFilePath />
<DBRegisterFilePath />
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
......@@ -59,8 +62,8 @@
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name />
<UserProg2Name />
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
......@@ -69,8 +72,8 @@
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name />
<UserProg2Name />
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
......@@ -80,14 +83,14 @@
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString />
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
......@@ -101,8 +104,8 @@
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument />
<IncludeLibraryModules />
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
......@@ -111,7 +114,7 @@
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments />
<TargetDllArguments></TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOption>
......@@ -135,11 +138,11 @@
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3 />
<Flash4 />
<pFcarmOut />
<pFcarmGrp />
<pFcArmRoot />
<Flash3></Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
......@@ -172,7 +175,7 @@
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M3"</AdsCpuType>
<RvctDeviceName />
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
......@@ -305,7 +308,7 @@
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector />
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
......@@ -332,9 +335,9 @@
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls />
<MiscControls></MiscControls>
<Define>USE_HAL_DRIVER, STM32F103xE</Define>
<Undefine />
<Undefine></Undefine>
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
</VariousControls>
</Cads>
......@@ -350,10 +353,10 @@
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls />
<Define />
<Undefine />
<IncludePath />
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
......@@ -365,13 +368,13 @@
<useFile>0</useFile>
<TextAddressRange>0x08000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<pXoBase />
<pXoBase></pXoBase>
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs />
<IncludeLibsPath />
<Misc />
<LinkerInputFile />
<DisabledWarnings />
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
......@@ -384,99 +387,71 @@
<FileType>1</FileType>
<FilePath>..\..\..\src\clock.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>components.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\components.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cpu.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\cpu.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>device.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\device.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\idle.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ipc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\ipc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>irq.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\irq.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>kservice.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\kservice.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\mem.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mempool.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\mempool.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\object.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>scheduler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\scheduler.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>signal.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\signal.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>thread.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\thread.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>timer.c</FileName>
<FileType>1</FileType>
......@@ -502,36 +477,26 @@
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>startup_stm32f103xe.s</FileName>
<FileType>2</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xe.s</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
......@@ -547,29 +512,21 @@
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>div0.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>showmem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cpuport.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
......@@ -585,57 +542,41 @@
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>serial.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dataqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>pipe.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ringblk_buf.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ringbuffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>waitqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>workqueue.c</FileName>
<FileType>1</FileType>
......@@ -651,36 +592,26 @@
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\shell.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>symbol.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\symbol.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_file.c</FileName>
<FileType>1</FileType>
......@@ -696,92 +627,66 @@
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_dma.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_cortex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_crc.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_pwr.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_rcc.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_cec.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_sram.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_gpio_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_uart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_usart.c</FileName>
<FileType>1</FileType>
......@@ -792,9 +697,11 @@
</Groups>
</Target>
</Targets>
<RTE>
<apis />
<components />
<files />
<apis/>
<components/>
<files/>
</RTE>
</Project>
bsp/stm32/stm32f103-dofly-M3S/rtconfig.py
浏览文件 @ 5d09122b
......@@ -46,7 +46,7 @@ if PLATFORM == 'gcc':
DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections'
CFLAGS = DEVICE + ' -Dgcc'
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
CPATH = ''
LPATH = ''
......@@ -73,7 +73,7 @@ elif PLATFORM == 'armcc':
DEVICE = ' --cpu Cortex-M3 '
CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
AFLAGS = DEVICE + ' --apcs=interwork '
LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict'
CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
......
bsp/stm32/stm32f103-dofly-M3S/template.uvopt
浏览文件 @ 5d09122b
......@@ -13,6 +13,7 @@
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>
<DaveTm>
......@@ -31,6 +32,7 @@
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
......@@ -96,9 +98,11 @@
<tRtrace>0</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<tPdscDbg>0</tPdscDbg>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>6</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
......@@ -110,9 +114,14 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U066FFF544856824987055530 -O78 -SF1800 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN0</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
......@@ -156,6 +165,17 @@
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
......
bsp/stm32/stm32f103-dofly-M3S/template.uvproj
浏览文件 @ 5d09122b
......@@ -10,6 +10,7 @@
<TargetName>rt-thread</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32F103RB</Device>
......@@ -45,7 +46,7 @@
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
<OutputName>rt-thread</OutputName>
<OutputName>rtthread</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
......@@ -72,6 +73,8 @@
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>1</RunUserProg1>
......@@ -80,6 +83,8 @@
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
......@@ -141,7 +146,6 @@
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>0</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
<UsePdscDebugDescription>0</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>6</TargetSelection>
......@@ -158,7 +162,7 @@
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver>Segger\JL2CM3.dll</Driver>
<Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
</TargetDlls>
</DebugOption>
<Utilities>
......@@ -218,12 +222,14 @@
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<nSecure>0</nSecure>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
......@@ -357,7 +363,15 @@
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>1</v6Lang>
<v6LangP>1</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
......@@ -375,6 +389,7 @@
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或