Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread
提交 2d98e499 编写于 作者: wuyangyong's avatar wuyangyong
浏览文件
操作

add lpc178x eth driver 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1765 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 01a17f4f
隐藏空白更改
内联 并排
Showing with 829 addition and 0 deletion
bsp/lpc178x/drivers/SConscript
浏览文件 @ 2d98e499
import copy
Import('RTT_ROOT')
Import('rtconfig')
from building import *
cwd = GetCurrentDir()
src = Glob('*.c')
# remove no need file.
if GetDepend('RT_USING_LWIP') == False:
src_need_remove = ['emac.c'] # need remove file list.
src_tmp = copy.copy(src)
count = 0
for i in range(0, len(src_tmp)):
s = str(src_tmp[i])
if s in src_need_remove:
src.pop(i-count)
count = count + 1
CPPPATH = [cwd]
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
......
bsp/lpc178x/drivers/emac.c 0 → 100644
浏览文件 @ 2d98e499
#include "LPC177x_8x.h"
#include "lpc177x_8x_pinsel.h"
#include "emac.h"
#include <rtthread.h>
#include "lwipopts.h"
#include <netif/ethernetif.h>
#define EMAC_PHY_AUTO 0
#define EMAC_PHY_10MBIT 1
#define EMAC_PHY_100MBIT 2
#define MAX_ADDR_LEN 6
struct lpc17xx_emac
{
/* inherit from ethernet device */
struct eth_device parent;
rt_uint8_t phy_mode;
/* interface address info. */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
};
static struct lpc17xx_emac lpc17xx_emac_device;
static struct rt_semaphore sem_slot, sem_lock;
/* Local Function Prototypes */
static void write_PHY (rt_uint32_t PhyReg, rt_uint32_t Value);
static rt_uint16_t read_PHY (rt_uint8_t PhyReg) ;
void ENET_IRQHandler(void)
{
rt_uint32_t status;
/* enter interrupt */
rt_interrupt_enter();
status = LPC_EMAC->IntStatus & LPC_EMAC->IntEnable;
/* Clear the interrupt. */
LPC_EMAC->IntClear = status;
if (status & INT_RX_DONE)
{
/* Disable EMAC RxDone interrupts. */
LPC_EMAC->IntEnable = INT_TX_DONE;
/* a frame has been received */
eth_device_ready(&(lpc17xx_emac_device.parent));
}
else if (status & INT_TX_DONE)
{
/* release one slot */
rt_sem_release(&sem_slot);
}
/* leave interrupt */
rt_interrupt_leave();
}
/* phy write */
static void write_PHY (rt_uint32_t PhyReg, rt_uint32_t Value)
{
unsigned int tout;
LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
LPC_EMAC->MWTD = Value;
/* Wait utill operation completed */
tout = 0;
for (tout = 0; tout < MII_WR_TOUT; tout++)
{
if ((LPC_EMAC->MIND & MIND_BUSY) == 0)
{
break;
}
}
}
/* phy read */
static rt_uint16_t read_PHY (rt_uint8_t PhyReg)
{
rt_uint32_t tout;
LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
LPC_EMAC->MCMD = MCMD_READ;
/* Wait until operation completed */
tout = 0;
for (tout = 0; tout < MII_RD_TOUT; tout++)
{
if ((LPC_EMAC->MIND & MIND_BUSY) == 0)
{
break;
}
}
LPC_EMAC->MCMD = 0;
return (LPC_EMAC->MRDD);
}
/* init rx descriptor */
rt_inline void rx_descr_init (void)
{
rt_uint32_t i;
for (i = 0; i < NUM_RX_FRAG; i++)
{
RX_DESC_PACKET(i) = RX_BUF(i);
RX_DESC_CTRL(i) = RCTRL_INT | (ETH_FRAG_SIZE-1);
RX_STAT_INFO(i) = 0;
RX_STAT_HASHCRC(i) = 0;
}
/* Set EMAC Receive Descriptor Registers. */
LPC_EMAC->RxDescriptor = RX_DESC_BASE;
LPC_EMAC->RxStatus = RX_STAT_BASE;
LPC_EMAC->RxDescriptorNumber = NUM_RX_FRAG-1;
/* Rx Descriptors Point to 0 */
LPC_EMAC->RxConsumeIndex = 0;
}
/* init tx descriptor */
rt_inline void tx_descr_init (void)
{
rt_uint32_t i;
for (i = 0; i < NUM_TX_FRAG; i++)
{
TX_DESC_PACKET(i) = TX_BUF(i);
TX_DESC_CTRL(i) = (1ul<<31) | (1ul<<30) | (1ul<<29) | (1ul<<28) | (1ul<<26) | (ETH_FRAG_SIZE-1);
TX_STAT_INFO(i) = 0;
}
/* Set EMAC Transmit Descriptor Registers. */
LPC_EMAC->TxDescriptor = TX_DESC_BASE;
LPC_EMAC->TxStatus = TX_STAT_BASE;
LPC_EMAC->TxDescriptorNumber = NUM_TX_FRAG-1;
/* Tx Descriptors Point to 0 */
LPC_EMAC->TxProduceIndex = 0;
}
/*
TX_EN P1_4
TXD0 P1_0
TXD1 P1_1
RXD0 P1_9
RXD1 P1_10
RX_ER P1_14
CRS_DV P1_8
MDC P1_16
MDIO P1_17
PHY_RESET P3_19
REF_CLK P1_15
*/
static rt_err_t lpc17xx_emac_init(rt_device_t dev)
{
/* Initialize the EMAC ethernet controller. */
rt_uint32_t regv, tout, id1, id2;
/* Power Up the EMAC controller. */
LPC_SC->PCONP |= (1UL<<30);
/* config RESET */
PINSEL_ConfigPin(3, 19, 0);
PINSEL_SetPinMode(3, 19, IOCON_MODE_PLAIN);
LPC_GPIO3->DIR |= 1<<19;
LPC_GPIO3->CLR = 1<<19;
/* Enable P1 Ethernet Pins. */
PINSEL_ConfigPin(1, 0, 1); /**< P1_0 ENET_TXD0 */
PINSEL_ConfigPin(1, 1, 1); /**< P1_1 ENET_TXD1 */
PINSEL_ConfigPin(1, 4, 1); /**< P1_4 ENET_TX_EN */
PINSEL_ConfigPin(1, 8, 1); /**< P1_8 ENET_CRS_DV */
PINSEL_ConfigPin(1, 9, 1); /**< P1_9 ENET_RXD0 */
PINSEL_ConfigPin(1, 10, 1); /**< P1_10 ENET_RXD1 */
PINSEL_ConfigPin(1, 14, 1); /**< P1_14 ENET_RX_ER */
PINSEL_ConfigPin(1, 15, 1); /**< P1_15 ENET_REF_CLK */
PINSEL_ConfigPin(1, 16, 1); /**< P1_16 ENET_MDC */
PINSEL_ConfigPin(1, 17, 1); /**< P1_17 ENET_MDIO */
LPC_GPIO3->SET = 1<<19;
/* Reset all EMAC internal modules. */
LPC_EMAC->MAC1 = MAC1_RES_TX | MAC1_RES_MCS_TX | MAC1_RES_RX | MAC1_RES_MCS_RX |
MAC1_SIM_RES | MAC1_SOFT_RES;
LPC_EMAC->Command = CR_REG_RES | CR_TX_RES | CR_RX_RES;
/* A short delay after reset. */
for (tout = 100; tout; tout--);
/* Initialize MAC control registers. */
LPC_EMAC->MAC1 = MAC1_PASS_ALL;
LPC_EMAC->MAC2 = MAC2_CRC_EN | MAC2_PAD_EN;
LPC_EMAC->MAXF = ETH_MAX_FLEN;
LPC_EMAC->CLRT = CLRT_DEF;
LPC_EMAC->IPGR = IPGR_DEF;
/* PCLK=18MHz, clock select=6, MDC=18/6=3MHz */
/* Enable Reduced MII interface. */
LPC_EMAC->MCFG = MCFG_CLK_DIV20 | MCFG_RES_MII;
for (tout = 100; tout; tout--);
LPC_EMAC->MCFG = MCFG_CLK_DIV20;
/* Enable Reduced MII interface. */
LPC_EMAC->Command = CR_RMII | CR_PASS_RUNT_FRM | CR_PASS_RX_FILT;
/* Reset Reduced MII Logic. */
LPC_EMAC->SUPP = SUPP_RES_RMII | SUPP_SPEED;
for (tout = 100; tout; tout--);
LPC_EMAC->SUPP = SUPP_SPEED;
/* Put the PHY in reset mode */
write_PHY (PHY_REG_BMCR, 0x8000);
for (tout = 1000; tout; tout--);
// /* Wait for hardware reset to end. */
// for (tout = 0; tout < 0x100000; tout++)
// {
// regv = read_PHY (PHY_REG_BMCR);
// if (!(regv & 0x8000))
// {
// /* Reset complete */
// break;
// }
// }
// if (tout >= 0x100000)
// {
// rt_kprintf("reset failed\r\n");
// return -RT_ERROR; /* reset failed */
// }
// /* Check if this is a DP83848C PHY. */
// id1 = read_PHY (PHY_REG_IDR1);
// id2 = read_PHY (PHY_REG_IDR2);
//
// if (((id1 << 16) | (id2 & 0xFFF0)) != DP83848C_ID)
// return -RT_ERROR;
/* Configure the PHY device */
/* Configure the PHY device */
switch (lpc17xx_emac_device.phy_mode)
{
case EMAC_PHY_AUTO:
/* Use autonegotiation about the link speed. */
write_PHY (PHY_REG_BMCR, PHY_AUTO_NEG);
/* Wait to complete Auto_Negotiation. */
// for (tout = 0; tout < 0x100000; tout++)
// {
// regv = read_PHY (PHY_REG_BMSR);
// if (regv & 0x0020)
// {
// /* Autonegotiation Complete. */
// break;
// }
// }
break;
case EMAC_PHY_10MBIT:
/* Connect at 10MBit */
write_PHY (PHY_REG_BMCR, PHY_FULLD_10M);
break;
case EMAC_PHY_100MBIT:
/* Connect at 100MBit */
write_PHY (PHY_REG_BMCR, PHY_FULLD_100M);
break;
}
if (tout >= 0x100000) return -RT_ERROR; // auto_neg failed
// /* Check the link status. */
// for (tout = 0; tout < 0x10000; tout++)
// {
// regv = read_PHY (PHY_REG_STS);
// if (regv & 0x0001)
// {
// /* Link is on. */
// break;
// }
// }
// if (tout >= 0x10000) return -RT_ERROR;
regv = 0x0004;
/* Configure Full/Half Duplex mode. */
if (regv & 0x0004)
{
/* Full duplex is enabled. */
LPC_EMAC->MAC2 |= MAC2_FULL_DUP;
LPC_EMAC->Command |= CR_FULL_DUP;
LPC_EMAC->IPGT = IPGT_FULL_DUP;
}
else
{
/* Half duplex mode. */
LPC_EMAC->IPGT = IPGT_HALF_DUP;
}
/* Configure 100MBit/10MBit mode. */
if (regv & 0x0002)
{
/* 10MBit mode. */
LPC_EMAC->SUPP = 0;
}
else
{
/* 100MBit mode. */
LPC_EMAC->SUPP = SUPP_SPEED;
}
/* Set the Ethernet MAC Address registers */
LPC_EMAC->SA0 = (lpc17xx_emac_device.dev_addr[1]<<8) | lpc17xx_emac_device.dev_addr[0];
LPC_EMAC->SA1 = (lpc17xx_emac_device.dev_addr[3]<<8) | lpc17xx_emac_device.dev_addr[2];
LPC_EMAC->SA2 = (lpc17xx_emac_device.dev_addr[5]<<8) | lpc17xx_emac_device.dev_addr[4];
/* Initialize Tx and Rx DMA Descriptors */
rx_descr_init ();
tx_descr_init ();
/* Receive Broadcast and Perfect Match Packets */
LPC_EMAC->RxFilterCtrl = RFC_BCAST_EN | RFC_PERFECT_EN;
/* Reset all interrupts */
LPC_EMAC->IntClear = 0xFFFF;
/* Enable EMAC interrupts. */
LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE;
/* Enable receive and transmit mode of MAC Ethernet core */
LPC_EMAC->Command |= (CR_RX_EN | CR_TX_EN);
LPC_EMAC->MAC1 |= MAC1_REC_EN;
/* Enable the ENET Interrupt */
NVIC_EnableIRQ(ENET_IRQn);
return RT_EOK;
}
static rt_err_t lpc17xx_emac_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t lpc17xx_emac_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t lpc17xx_emac_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_size_t lpc17xx_emac_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t lpc17xx_emac_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
switch (cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if (args) rt_memcpy(args, lpc17xx_emac_device.dev_addr, 6);
else return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
}
/* EtherNet Device Interface */
/* transmit packet. */
rt_err_t lpc17xx_emac_tx( rt_device_t dev, struct pbuf* p)
{
rt_uint32_t Index, IndexNext;
struct pbuf *q;
rt_uint8_t *ptr;
/* take a slot */
rt_sem_take(&sem_slot, RT_WAITING_FOREVER);
/* lock EMAC device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
/* get produce index */
Index = LPC_EMAC->TxProduceIndex;
/* calculate next index */
IndexNext = LPC_EMAC->TxProduceIndex + 1;
if(IndexNext > LPC_EMAC->TxDescriptorNumber)
IndexNext = 0;
/* copy data to tx buffer */
q = p;
ptr = (rt_uint8_t*)TX_BUF(Index);
while (q)
{
memcpy(ptr, q->payload, q->len);
ptr += q->len;
q = q->next;
}
TX_DESC_CTRL(Index) &= ~0x7ff;
TX_DESC_CTRL(Index) |= (p->tot_len - 1) & 0x7ff;
/* change index to the next */
LPC_EMAC->TxProduceIndex = IndexNext;
/* unlock EMAC device */
rt_sem_release(&sem_lock);
return RT_EOK;
}
/* reception packet. */
struct pbuf *lpc17xx_emac_rx(rt_device_t dev)
{
struct pbuf* p;
rt_uint32_t size;
rt_uint32_t Index;
/* init p pointer */
p = RT_NULL;
/* lock EMAC device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
Index = LPC_EMAC->RxConsumeIndex;
if(Index != LPC_EMAC->RxProduceIndex)
{
size = (RX_STAT_INFO(Index) & 0x7ff)+1;
if (size > ETH_FRAG_SIZE) size = ETH_FRAG_SIZE;
/* allocate buffer */
p = pbuf_alloc(PBUF_LINK, size, PBUF_RAM);
if (p != RT_NULL)
{
struct pbuf* q;
rt_uint8_t *ptr;
ptr = (rt_uint8_t*)RX_BUF(Index);
for (q = p; q != RT_NULL; q= q->next)
{
memcpy(q->payload, ptr, q->len);
ptr += q->len;
}
}
/* move Index to the next */
if(++Index > LPC_EMAC->RxDescriptorNumber)
Index = 0;
/* set consume index */
LPC_EMAC->RxConsumeIndex = Index;
}
else
{
/* Enable RxDone interrupt */
LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE;
}
/* unlock EMAC device */
rt_sem_release(&sem_lock);
return p;
}
void lpc17xx_emac_hw_init(void)
{
rt_sem_init(&sem_slot, "tx_slot", NUM_TX_FRAG, RT_IPC_FLAG_FIFO);
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
/* set autonegotiation mode */
lpc17xx_emac_device.phy_mode = EMAC_PHY_AUTO;
// OUI 00-60-37 NXP Semiconductors
lpc17xx_emac_device.dev_addr[0] = 0x00;
lpc17xx_emac_device.dev_addr[1] = 0x60;
lpc17xx_emac_device.dev_addr[2] = 0x37;
/* set mac address: (only for test) */
lpc17xx_emac_device.dev_addr[3] = 0xA2;
lpc17xx_emac_device.dev_addr[4] = 0x45;
lpc17xx_emac_device.dev_addr[5] = 0x5E;
lpc17xx_emac_device.parent.parent.init = lpc17xx_emac_init;
lpc17xx_emac_device.parent.parent.open = lpc17xx_emac_open;
lpc17xx_emac_device.parent.parent.close = lpc17xx_emac_close;
lpc17xx_emac_device.parent.parent.read = lpc17xx_emac_read;
lpc17xx_emac_device.parent.parent.write = lpc17xx_emac_write;
lpc17xx_emac_device.parent.parent.control = lpc17xx_emac_control;
lpc17xx_emac_device.parent.parent.user_data = RT_NULL;
lpc17xx_emac_device.parent.eth_rx = lpc17xx_emac_rx;
lpc17xx_emac_device.parent.eth_tx = lpc17xx_emac_tx;
eth_device_init(&(lpc17xx_emac_device.parent), "e0");
}
#ifdef RT_USING_FINSH
#include <finsh.h>
void emac_dump()
{
// rt_kprintf("IntCount : %d\n", intcount);
rt_kprintf("Status : %08x\n", LPC_EMAC->Status);
rt_kprintf("Command : %08x\n", LPC_EMAC->Command);
rt_kprintf("RxStatus : %08x\n", LPC_EMAC->RxStatus);
rt_kprintf("TxStatus : %08x\n", LPC_EMAC->TxStatus);
rt_kprintf("IntEnable: %08x\n", LPC_EMAC->IntEnable);
rt_kprintf("IntStatus: %08x\n", LPC_EMAC->IntStatus);
}
FINSH_FUNCTION_EXPORT(emac_dump, dump emac register);
#endif
bsp/lpc178x/drivers/emac.h 0 → 100644
浏览文件 @ 2d98e499
#ifndef __LPC17XX_EMAC_H
#define __LPC17XX_EMAC_H
#include "LPC177x_8x.h"
/* EMAC Memory Buffer configuration for 16K Ethernet RAM. */
#define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */
#define NUM_TX_FRAG 3 /* Num.of TX Fragments 3*1536= 4.6kB */
#define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */
#define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */
/* EMAC variables located in 16K Ethernet SRAM */
#define RX_DESC_BASE 0x20000000
#define RX_STAT_BASE (RX_DESC_BASE + NUM_RX_FRAG*8)
#define TX_DESC_BASE (RX_STAT_BASE + NUM_RX_FRAG*8)
#define TX_STAT_BASE (TX_DESC_BASE + NUM_TX_FRAG*8)
#define RX_BUF_BASE (TX_STAT_BASE + NUM_TX_FRAG*4)
#define TX_BUF_BASE (RX_BUF_BASE + NUM_RX_FRAG*ETH_FRAG_SIZE)
/* RX and TX descriptor and status definitions. */
#define RX_DESC_PACKET(i) (*(unsigned int *)(RX_DESC_BASE + 8*i))
#define RX_DESC_CTRL(i) (*(unsigned int *)(RX_DESC_BASE+4 + 8*i))
#define RX_STAT_INFO(i) (*(unsigned int *)(RX_STAT_BASE + 8*i))
#define RX_STAT_HASHCRC(i) (*(unsigned int *)(RX_STAT_BASE+4 + 8*i))
#define TX_DESC_PACKET(i) (*(unsigned int *)(TX_DESC_BASE + 8*i))
#define TX_DESC_CTRL(i) (*(unsigned int *)(TX_DESC_BASE+4 + 8*i))
#define TX_STAT_INFO(i) (*(unsigned int *)(TX_STAT_BASE + 4*i))
#define RX_BUF(i) (RX_BUF_BASE + ETH_FRAG_SIZE*i)
#define TX_BUF(i) (TX_BUF_BASE + ETH_FRAG_SIZE*i)
/* MAC Configuration Register 1 */
#define MAC1_REC_EN 0x00000001 /* Receive Enable */
#define MAC1_PASS_ALL 0x00000002 /* Pass All Receive Frames */
#define MAC1_RX_FLOWC 0x00000004 /* RX Flow Control */
#define MAC1_TX_FLOWC 0x00000008 /* TX Flow Control */
#define MAC1_LOOPB 0x00000010 /* Loop Back Mode */
#define MAC1_RES_TX 0x00000100 /* Reset TX Logic */
#define MAC1_RES_MCS_TX 0x00000200 /* Reset MAC TX Control Sublayer */
#define MAC1_RES_RX 0x00000400 /* Reset RX Logic */
#define MAC1_RES_MCS_RX 0x00000800 /* Reset MAC RX Control Sublayer */
#define MAC1_SIM_RES 0x00004000 /* Simulation Reset */
#define MAC1_SOFT_RES 0x00008000 /* Soft Reset MAC */
/* MAC Configuration Register 2 */
#define MAC2_FULL_DUP 0x00000001 /* Full Duplex Mode */
#define MAC2_FRM_LEN_CHK 0x00000002 /* Frame Length Checking */
#define MAC2_HUGE_FRM_EN 0x00000004 /* Huge Frame Enable */
#define MAC2_DLY_CRC 0x00000008 /* Delayed CRC Mode */
#define MAC2_CRC_EN 0x00000010 /* Append CRC to every Frame */
#define MAC2_PAD_EN 0x00000020 /* Pad all Short Frames */
#define MAC2_VLAN_PAD_EN 0x00000040 /* VLAN Pad Enable */
#define MAC2_ADET_PAD_EN 0x00000080 /* Auto Detect Pad Enable */
#define MAC2_PPREAM_ENF 0x00000100 /* Pure Preamble Enforcement */
#define MAC2_LPREAM_ENF 0x00000200 /* Long Preamble Enforcement */
#define MAC2_NO_BACKOFF 0x00001000 /* No Backoff Algorithm */
#define MAC2_BACK_PRESSURE 0x00002000 /* Backoff Presurre / No Backoff */
#define MAC2_EXCESS_DEF 0x00004000 /* Excess Defer */
/* Back-to-Back Inter-Packet-Gap Register */
#define IPGT_FULL_DUP 0x00000015 /* Recommended value for Full Duplex */
#define IPGT_HALF_DUP 0x00000012 /* Recommended value for Half Duplex */
/* Non Back-to-Back Inter-Packet-Gap Register */
#define IPGR_DEF 0x00000012 /* Recommended value */
/* Collision Window/Retry Register */
#define CLRT_DEF 0x0000370F /* Default value */
/* PHY Support Register */
#define SUPP_SPEED 0x00000100 /* Reduced MII Logic Current Speed */
#define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */
/* Test Register */
#define TEST_SHCUT_PQUANTA 0x00000001 /* Shortcut Pause Quanta */
#define TEST_TST_PAUSE 0x00000002 /* Test Pause */
#define TEST_TST_BACKP 0x00000004 /* Test Back Pressure */
/* MII Management Configuration Register */
#define MCFG_SCAN_INC 0x00000001 /* Scan Increment PHY Address */
#define MCFG_SUPP_PREAM 0x00000002 /* Suppress Preamble */
#define MCFG_CLK_SEL 0x0000001C /* Clock Select Mask */
#define MCFG_RES_MII 0x00008000 /* Reset MII Management Hardware */
#define MCFG_CLK_DIV4 0x00000000 /* MDC = hclk / 4 */
#define MCFG_CLK_DIV6 0x00000008 /* MDC = hclk / 6 */
#define MCFG_CLK_DIV8 0x0000000C /* MDC = hclk / 8 */
#define MCFG_CLK_DIV10 0x00000010 /* MDC = hclk / 10 */
#define MCFG_CLK_DIV14 0x00000014 /* MDC = hclk / 14 */
#define MCFG_CLK_DIV20 0x00000018 /* MDC = hclk / 20 */
#define MCFG_CLK_DIV28 0x0000001C /* MDC = hclk / 28 */
/* MII Management Command Register */
#define MCMD_READ 0x00000001 /* MII Read */
#define MCMD_SCAN 0x00000002 /* MII Scan continuously */
#define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
#define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
/* MII Management Address Register */
#define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */
#define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
/* MII Management Indicators Register */
#define MIND_BUSY 0x00000001 /* MII is Busy */
#define MIND_SCAN 0x00000002 /* MII Scanning in Progress */
#define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */
#define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */
/* Command Register */
#define CR_RX_EN 0x00000001 /* Enable Receive */
#define CR_TX_EN 0x00000002 /* Enable Transmit */
#define CR_REG_RES 0x00000008 /* Reset Host Registers */
#define CR_TX_RES 0x00000010 /* Reset Transmit Datapath */
#define CR_RX_RES 0x00000020 /* Reset Receive Datapath */
#define CR_PASS_RUNT_FRM 0x00000040 /* Pass Runt Frames */
#define CR_PASS_RX_FILT 0x00000080 /* Pass RX Filter */
#define CR_TX_FLOW_CTRL 0x00000100 /* TX Flow Control */
#define CR_RMII 0x00000200 /* Reduced MII Interface */
#define CR_FULL_DUP 0x00000400 /* Full Duplex */
/* Status Register */
#define SR_RX_EN 0x00000001 /* Enable Receive */
#define SR_TX_EN 0x00000002 /* Enable Transmit */
/* Transmit Status Vector 0 Register */
#define TSV0_CRC_ERR 0x00000001 /* CRC error */
#define TSV0_LEN_CHKERR 0x00000002 /* Length Check Error */
#define TSV0_LEN_OUTRNG 0x00000004 /* Length Out of Range */
#define TSV0_DONE 0x00000008 /* Tramsmission Completed */
#define TSV0_MCAST 0x00000010 /* Multicast Destination */
#define TSV0_BCAST 0x00000020 /* Broadcast Destination */
#define TSV0_PKT_DEFER 0x00000040 /* Packet Deferred */
#define TSV0_EXC_DEFER 0x00000080 /* Excessive Packet Deferral */
#define TSV0_EXC_COLL 0x00000100 /* Excessive Collision */
#define TSV0_LATE_COLL 0x00000200 /* Late Collision Occured */
#define TSV0_GIANT 0x00000400 /* Giant Frame */
#define TSV0_UNDERRUN 0x00000800 /* Buffer Underrun */
#define TSV0_BYTES 0x0FFFF000 /* Total Bytes Transferred */
#define TSV0_CTRL_FRAME 0x10000000 /* Control Frame */
#define TSV0_PAUSE 0x20000000 /* Pause Frame */
#define TSV0_BACK_PRESS 0x40000000 /* Backpressure Method Applied */
#define TSV0_VLAN 0x80000000 /* VLAN Frame */
/* Transmit Status Vector 1 Register */
#define TSV1_BYTE_CNT 0x0000FFFF /* Transmit Byte Count */
#define TSV1_COLL_CNT 0x000F0000 /* Transmit Collision Count */
/* Receive Status Vector Register */
#define RSV_BYTE_CNT 0x0000FFFF /* Receive Byte Count */
#define RSV_PKT_IGNORED 0x00010000 /* Packet Previously Ignored */
#define RSV_RXDV_SEEN 0x00020000 /* RXDV Event Previously Seen */
#define RSV_CARR_SEEN 0x00040000 /* Carrier Event Previously Seen */
#define RSV_REC_CODEV 0x00080000 /* Receive Code Violation */
#define RSV_CRC_ERR 0x00100000 /* CRC Error */
#define RSV_LEN_CHKERR 0x00200000 /* Length Check Error */
#define RSV_LEN_OUTRNG 0x00400000 /* Length Out of Range */
#define RSV_REC_OK 0x00800000 /* Frame Received OK */
#define RSV_MCAST 0x01000000 /* Multicast Frame */
#define RSV_BCAST 0x02000000 /* Broadcast Frame */
#define RSV_DRIB_NIBB 0x04000000 /* Dribble Nibble */
#define RSV_CTRL_FRAME 0x08000000 /* Control Frame */
#define RSV_PAUSE 0x10000000 /* Pause Frame */
#define RSV_UNSUPP_OPC 0x20000000 /* Unsupported Opcode */
#define RSV_VLAN 0x40000000 /* VLAN Frame */
/* Flow Control Counter Register */
#define FCC_MIRR_CNT 0x0000FFFF /* Mirror Counter */
#define FCC_PAUSE_TIM 0xFFFF0000 /* Pause Timer */
/* Flow Control Status Register */
#define FCS_MIRR_CNT 0x0000FFFF /* Mirror Counter Current */
/* Receive Filter Control Register */
#define RFC_UCAST_EN 0x00000001 /* Accept Unicast Frames Enable */
#define RFC_BCAST_EN 0x00000002 /* Accept Broadcast Frames Enable */
#define RFC_MCAST_EN 0x00000004 /* Accept Multicast Frames Enable */
#define RFC_UCAST_HASH_EN 0x00000008 /* Accept Unicast Hash Filter Frames */
#define RFC_MCAST_HASH_EN 0x00000010 /* Accept Multicast Hash Filter Fram.*/
#define RFC_PERFECT_EN 0x00000020 /* Accept Perfect Match Enable */
#define RFC_MAGP_WOL_EN 0x00001000 /* Magic Packet Filter WoL Enable */
#define RFC_PFILT_WOL_EN 0x00002000 /* Perfect Filter WoL Enable */
/* Receive Filter WoL Status/Clear Registers */
#define WOL_UCAST 0x00000001 /* Unicast Frame caused WoL */
#define WOL_BCAST 0x00000002 /* Broadcast Frame caused WoL */
#define WOL_MCAST 0x00000004 /* Multicast Frame caused WoL */
#define WOL_UCAST_HASH 0x00000008 /* Unicast Hash Filter Frame WoL */
#define WOL_MCAST_HASH 0x00000010 /* Multicast Hash Filter Frame WoL */
#define WOL_PERFECT 0x00000020 /* Perfect Filter WoL */
#define WOL_RX_FILTER 0x00000080 /* RX Filter caused WoL */
#define WOL_MAG_PACKET 0x00000100 /* Magic Packet Filter caused WoL */
/* Interrupt Status/Enable/Clear/Set Registers */
#define INT_RX_OVERRUN 0x00000001 /* Overrun Error in RX Queue */
#define INT_RX_ERR 0x00000002 /* Receive Error */
#define INT_RX_FIN 0x00000004 /* RX Finished Process Descriptors */
#define INT_RX_DONE 0x00000008 /* Receive Done */
#define INT_TX_UNDERRUN 0x00000010 /* Transmit Underrun */
#define INT_TX_ERR 0x00000020 /* Transmit Error */
#define INT_TX_FIN 0x00000040 /* TX Finished Process Descriptors */
#define INT_TX_DONE 0x00000080 /* Transmit Done */
#define INT_SOFT_INT 0x00001000 /* Software Triggered Interrupt */
#define INT_WAKEUP 0x00002000 /* Wakeup Event Interrupt */
/* Power Down Register */
#define PD_POWER_DOWN 0x80000000 /* Power Down MAC */
/* RX Descriptor Control Word */
#define RCTRL_SIZE 0x000007FF /* Buffer size mask */
#define RCTRL_INT 0x80000000 /* Generate RxDone Interrupt */
/* RX Status Hash CRC Word */
#define RHASH_SA 0x000001FF /* Hash CRC for Source Address */
#define RHASH_DA 0x001FF000 /* Hash CRC for Destination Address */
/* RX Status Information Word */
#define RINFO_SIZE 0x000007FF /* Data size in bytes */
#define RINFO_CTRL_FRAME 0x00040000 /* Control Frame */
#define RINFO_VLAN 0x00080000 /* VLAN Frame */
#define RINFO_FAIL_FILT 0x00100000 /* RX Filter Failed */
#define RINFO_MCAST 0x00200000 /* Multicast Frame */
#define RINFO_BCAST 0x00400000 /* Broadcast Frame */
#define RINFO_CRC_ERR 0x00800000 /* CRC Error in Frame */
#define RINFO_SYM_ERR 0x01000000 /* Symbol Error from PHY */
#define RINFO_LEN_ERR 0x02000000 /* Length Error */
#define RINFO_RANGE_ERR 0x04000000 /* Range Error (exceeded max. size) */
#define RINFO_ALIGN_ERR 0x08000000 /* Alignment Error */
#define RINFO_OVERRUN 0x10000000 /* Receive overrun */
#define RINFO_NO_DESCR 0x20000000 /* No new Descriptor available */
#define RINFO_LAST_FLAG 0x40000000 /* Last Fragment in Frame */
#define RINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
#define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_CRC_ERR | RINFO_SYM_ERR | \
RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN)
/* TX Descriptor Control Word */
#define TCTRL_SIZE 0x000007FF /* Size of data buffer in bytes */
#define TCTRL_OVERRIDE 0x04000000 /* Override Default MAC Registers */
#define TCTRL_HUGE 0x08000000 /* Enable Huge Frame */
#define TCTRL_PAD 0x10000000 /* Pad short Frames to 64 bytes */
#define TCTRL_CRC 0x20000000 /* Append a hardware CRC to Frame */
#define TCTRL_LAST 0x40000000 /* Last Descriptor for TX Frame */
#define TCTRL_INT 0x80000000 /* Generate TxDone Interrupt */
/* TX Status Information Word */
#define TINFO_COL_CNT 0x01E00000 /* Collision Count */
#define TINFO_DEFER 0x02000000 /* Packet Deferred (not an error) */
#define TINFO_EXCESS_DEF 0x04000000 /* Excessive Deferral */
#define TINFO_EXCESS_COL 0x08000000 /* Excessive Collision */
#define TINFO_LATE_COL 0x10000000 /* Late Collision Occured */
#define TINFO_UNDERRUN 0x20000000 /* Transmit Underrun */
#define TINFO_NO_DESCR 0x40000000 /* No new Descriptor available */
#define TINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
/* ENET Device Revision ID */
#define OLD_EMAC_MODULE_ID 0x39022000 /* Rev. ID for first rev '-' */
/* DP83848C PHY Registers */
#define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
#define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
#define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
#define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
#define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
#define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
#define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
#define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
/* PHY Extended Registers */
#define PHY_REG_STS 0x10 /* Status Register */
#define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
#define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
#define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
#define PHY_REG_RECR 0x15 /* Receive Error Counter */
#define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
#define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
#define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
#define PHY_REG_PHYCR 0x19 /* PHY Control Register */
#define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
#define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
#define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
#define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
#define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
#define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
#define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
#define PHY_AUTO_NEG 0x3000 /* Select Auto Negotiation */
#define DP83848C_DEF_ADR 0x0F00 /* Default PHY device address */
#define DP83848C_ID 0x20005C90 /* PHY Identifier */
void lpc17xx_emac_hw_init(void);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或