[BSP] Update project file for i.MXRT/i.MXRT1050-EVK.

bsp/imxrt/imxrt1050-evk/.config

@@ -137,13 +137,15 @@ CONFIG_RT_PIPE_BUFSZ=512
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
-# CONFIG_RT_USING_CPUTIME is not set
+CONFIG_RT_USING_CPUTIME=y
+CONFIG_RT_USING_CPUTIME_CORTEXM=y
 CONFIG_RT_USING_I2C=y
 CONFIG_RT_USING_I2C_BITOPS=y
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_MTD is not set
 CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RTC_SYNC_USING_NTP is not set
@@ -175,8 +177,11 @@ CONFIG_RT_USING_SPI=y
 # POSIX layer and C standard library
 #
 CONFIG_RT_USING_LIBC=y
-# CONFIG_RT_USING_PTHREADS is not set
-# CONFIG_RT_USING_POSIX is not set
+CONFIG_RT_USING_PTHREADS=y
+CONFIG_RT_USING_POSIX=y
+# CONFIG_RT_USING_POSIX_MMAP is not set
+# CONFIG_RT_USING_POSIX_TERMIOS is not set
+# CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_MODULE is not set
 
 #

bsp/imxrt/imxrt1050-evk/flexspi_nor.scf

+#! armcc -E
+/*
+** ###################################################################
+**     Processors:          MIMXRT1052CVL5A
+**                          MIMXRT1052DVL6A
+**
+**     Compiler:            Keil ARM C/C++ Compiler
+**     Reference manual:    IMXRT1050RM Rev.C, 08/2017
+**     Version:             rev. 0.1, 2017-01-10
+**     Build:               b170927
+**
+**     Abstract:
+**         Linker file for the Keil ARM C/C++ Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2017 NXP
+**     Redistribution and use in source and binary forms, with or without modification,
+**     are permitted provided that the following conditions are met:
+**
+**     1. Redistributions of source code must retain the above copyright notice, this list
+**       of conditions and the following disclaimer.
+**
+**     2. Redistributions in binary form must reproduce the above copyright notice, this
+**       list of conditions and the following disclaimer in the documentation and/or
+**       other materials provided with the distribution.
+**
+**     3. Neither the name of the copyright holder nor the names of its
+**       contributors may be used to endorse or promote products derived from this
+**       software without specific prior written permission.
+**
+**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+**     http:                 www.nxp.com
+**     mail:                 support@nxp.com
+**
+** ###################################################################
+*/
+
+#define m_flash_config_start           0x60000000
+#define m_flash_config_size            0x00001000
+
+#define m_ivt_start                    0x60001000
+#define m_ivt_size                     0x00001000
+
+#define m_text_start                   0x60002000
+#define m_text_size                    0x1F7FE000
+
+#define m_data_start                   0x20000000
+#define m_data_size                    0x00020000
+
+#define m_ncache_start                 0x81E00000
+#define m_ncache_size                  0x00200000
+
+/* Sizes */
+#if (defined(__stack_size__))
+  #define Stack_Size                   __stack_size__
+#else
+  #define Stack_Size                   0x1000
+#endif
+
+#if (defined(__heap_size__))
+  #define Heap_Size                    __heap_size__
+#else
+  #define Heap_Size                    0x0400
+#endif
+
+#include "rtconfig.h"
+
+#if (defined(BOARD_USING_HYPERFLASH))
+LR_m_rom_config m_flash_config_start m_flash_config_size      ; load region size_region
+{   
+    RW_m_config_text m_flash_config_start m_flash_config_size ; load address = execution address
+    { 
+        * (.boot_hdr.conf, +FIRST)
+    }  
+}
+
+LR_m_rom_ivt m_ivt_start m_ivt_size ; load region size_region
+{   
+    RW_m_ivt_text m_ivt_start m_ivt_size ; load address = execution address
+    { 
+        * (.boot_hdr.ivt, +FIRST)
+        * (.boot_hdr.boot_data)
+        * (.boot_hdr.dcd_data)
+    }   
+}
+#endif
+
+#define RTT_HEAP_SIZE (m_data_size-ImageLength(RW_m_data)-ImageLength(ARM_LIB_HEAP)-ImageLength(ARM_LIB_STACK))
+
+; load region size_region
+LR_IROM1 m_text_start m_text_size 
+{   
+    ER_IROM1 m_text_start m_text_size ; load address = execution address
+    { 
+        * (RESET,+FIRST)
+        * (InRoot$$Sections)
+        .ANY (+RO)
+    }
+  
+    RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size ; RW data
+    { 
+        .ANY (+RW +ZI)
+    }
+    
+    ARM_LIB_HEAP +0 EMPTY Heap_Size{}   ; Heap region growing up
+    ARM_LIB_STACK +0 EMPTY Stack_Size{} ; Stack region growing down
+    RTT_HEAP +0 EMPTY RTT_HEAP_SIZE{}
+
+    ; ncache RW data
+    RW_m_ncache m_ncache_start m_ncache_size 
+    { 
+        * (NonCacheable.init)
+        * (NonCacheable)
+    }
+}

bsp/imxrt/imxrt1050-evk/rtconfig.h

@@ -93,6 +93,8 @@
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
+#define RT_USING_CPUTIME
+#define RT_USING_CPUTIME_CORTEXM
 #define RT_USING_I2C
 #define RT_USING_I2C_BITOPS
 #define RT_USING_PIN
@@ -111,6 +113,8 @@
 /* POSIX layer and C standard library */
 
 #define RT_USING_LIBC
+#define RT_USING_PTHREADS
+#define RT_USING_POSIX
 
 /* Network */
 

bsp/imxrt/imxrt1050-evk/template.uvoptx

@@ -73,7 +73,7 @@
         <LExpSel>0</LExpSel>
       </OPTXL>
       <OPTFL>
-        <tvExp>0</tvExp>
+        <tvExp>1</tvExp>
         <tvExpOptDlg>0</tvExpOptDlg>
         <IsCurrentTarget>1</IsCurrentTarget>
       </OPTFL>
@@ -101,9 +101,7 @@
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
         <bEvRecOn>1</bEvRecOn>
-        <bSchkAxf>0</bSchkAxf>
-        <bTchkAxf>0</bTchkAxf>
-        <nTsel>3</nTsel>
+        <nTsel>2</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -113,7 +111,7 @@
         <tDllPa></tDllPa>
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
-        <tIfile>.\Libraries\arm\evkmimxrt1050_flexspi_nor.ini</tIfile>
+        <tIfile>.\flexspi_nor.ini</tIfile>
         <pMon>BIN\CMSIS_AGDI.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
@@ -172,10 +170,6 @@
       <pszMrule></pszMrule>
       <pSingCmds></pSingCmds>
       <pMultCmds></pMultCmds>
-      <pMisraNamep></pMisraNamep>
-      <pszMrulep></pszMrulep>
-      <pSingCmdsp></pSingCmdsp>
-      <pMultCmdsp></pMultCmdsp>
     </TargetOption>
   </Target>
 

bsp/imxrt/imxrt1050-evk/template.uvprojx

@@ -11,7 +11,6 @@
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
       <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
-      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>MIMXRT1052:M7</Device>
@@ -367,7 +366,7 @@
             <TextAddressRange>0x00000000</TextAddressRange>
             <DataAddressRange>0x10000000</DataAddressRange>
             <pXoBase></pXoBase>
-            <ScatterFile>.\Libraries\arm\MIMXRT1052xxxxx_flexspi_nor.scf</ScatterFile>
+            <ScatterFile>.\flexspi_nor.scf</ScatterFile>
             <IncludeLibs></IncludeLibs>
             <IncludeLibsPath></IncludeLibsPath>
             <Misc></Misc>